In vitro effect on cancer cells: synthesis and preparation of polyurethane membranes for controlled delivery of curcumin

HSA-curcumin nanoparticles: a promising substitution for Curcumin as a Cancer chemoprevention and therapy

BACKGROUND

Many solutions have been evaluated to deal with "chemotherapy and radiation-resistant cancer cells' as well as "severe complications of chemotherapy drugs". One of these solutions is the use of herbal compounds with antioxidant properties. Among these antioxidant compounds, curcumin is identified as the strongest one to inhibit cancerous cells proliferation. However, its clinical trials have encountered many constraints, because curcumin is insoluble in water and unstable in physiological conditions. To overcome these limitations, in this study, curcumin was conjugated with human serum albumin (HSA) and its effects on breast cancer cell lines were also measured.

METHODS

After making of HSA-curcumin nanoparticles (NPs) by the desolvation technique, they were characterized by the FTIR, DLS, TEM, and SEM method. At the end, its anticancer effects have been examined using MTT test and apoptosis assay.

RESULTS

The FTIR graph confirmed that curcumin and HSA have been conjugated along with each other. Particles size was reported to be 220 nm and 180 nm by DLS and SEM, respectively. The zeta potential of HSA-curcumin NPs was -7 mV, while it was -37 mV for curcumin. The MTT and apoptosis assay results indicated that the toxicity of HSA-curcumin NPs on the normal cell are less than curcumin; however, its anti-cancer effects on the cancer cells are much greater, compared to curcumin.

CONCLUSION

HSA-curcumin NPs increase curcumin solubility in water as well as its stability in physiological and acidic conditions. These factors have the ability of overwhelming the limitations on using curcumin alone, and they could result in a significant increase in the toxicity of curcumin on the cancer cells without increasing its toxicity on the normal cells. Grapical abstract.

Controlled curcumin release from nanofibers based on amphiphilic-block segmented polyurethanes

A series of biodegradable amphiphilic-block segmented polyurethanes (SPUs) are designed and synthesized based on di-block and tri-block macrodiols of polycaprolactone (PCL) and polyethylene glycol (PEG). Curcumin, as a model herbal antibacterial agent, is used due to its effective inhibitory action against Gram-positive and Gram-negative bacteria. Curcumin-loaded nanofibers, with 400-900 nm diameter range, have been prepared by electrospinning of SPUs. The synthesized SPUs can be used for wound dressing applications due to their excellent mechanical properties and higher hydrophilicity in comparison to PCL-based polyurethane. The elongation-at-break of tri-block SPU with PEG-PCL-PEG soft segments is 350% when produced as an electrospun mat and that for film is 1500%. In vitro release of curcumin, examined by UV-Vis spectroscopy, shows a steady release during 18 days. The inclusion of PEG chains in the soft segment increases the hydrophilicity and biodegradation rate of the electrospun mats compared to a PCL-based polyurethane, which eventually results in a higher curcumin release rate. The antibacterial activity of 50 mg of 10% curcumin-loaded SPU nanofibers is about 100% and 93% against Escherichia coli (E. coli ATCC: 25922) and Staphylococcus aureus (S. aureus ATCC: 6538), respectively. Nontoxic behavior of the scaffolds is evaluated through MTT assay against L929 mouse fibroblast cells. The results show that the synthesized SPUs can be used as a nanoscale sustained release carrier. The SPU with PEG-PCL-PEG soft segments is an excellent candidate for wound dressing in tissues undergoing large deformations during normal activities.

Grafting of Gallic Acid onto a Bioactive Ti6Al4V Alloy: A Physico-Chemical Characterization

Despite increasing interest in the use of natural biomolecules for different applications, few attempts of coupling them to inorganic biomaterials are reported in literature. Functionalization of metal implants with natural biomolecules could allow a local action, overcoming the issue of low bioavailability through systemic administration. In the present work, gallic acid was grafted to a pre-treated Ti6Al4V in order to improve its biological response in bone contact applications. The grafting procedure was optimized by choosing the concentration of gallic acid (1 mg/mL) and the solvent of the solution, which was used as a source for functionalization, in order to maximize the amount of the grafted molecule on the titanium substrate. The functionalized surfaces were characterized. The results showed that functionalization with Simulated Body Fluid (SBF) as solvent medium was the most effective in terms of the amount and activity of the grafted biomolecule. A key role of calcium ions in the grafting mechanism is suggested, involving the formation of coordination compounds formed by way of gallic acid carboxylate and Ti–O− as oxygenated donor groups. Bioactive behavior and surface charge of the pre-treated Ti6Al4V surface were conserved after functionalization. The functionalized surface exposed a greater amount of OH groups and showed higher wettability.

Fabrication of curcumin-loaded electrospun nanofiberous polyurethanes with anti-bacterial activity

Abstract

Two series of polyurethane (PU), based on polycaprolactone (PCL) as soft segments with two different molecular weights (2000 and 530 Da), and hexamethylene diisocyanate (HDI) and 1,4-butandiol (BDO) as hard segments were synthesized to fabricate curcumin-loaded electrospun nanofibrous PCL-based PU substrate. Chemical structures of the synthesized PUs were characterized by FTIR and NMR spectroscopy techniques. The thermal properties were analyzed by differential scanning calorimetry (DSC) and surface hydrophilicity was studied by static contact angle and bulk hydrophilicity was evaluated by water uptake test. Thereafter, bead-free PU nanofiberous substrate containing curcumin was fabricated by electrospinning and morphology of the mats was observed by scanning electron microscopy (SEM). Mechanical properties of the electrospun mats in comparison with polymeric films were assessed by a universal test machine. The in vitro release of curcumin was studied by UV–Vis spectroscopy. The optical density of the bacterial solutions was used to evaluate the antibacterial activity of the curcumin-loaded nanofibrous mats against Escherichia coli (E-coli ATCC: 25922). The results showed that curcumin-loaded PU synthesized by PCL with molecular weight of 2000 Da displayed better mechanical properties as well as better antibacterial properties in wound dressing application.

Graphical abstract

Development of highly stabilized curcumin nanoparticles by flash nanoprecipitation and lyophilization

The influence of critical operating parameters on the Flash Nanoprecipitation (FNP) and resulting material properties of curcumin (CUR) nanoparticles has been evaluated using a confined impinging jets-with-dilution mixer (CIJ-D-M). It has been shown that the mixing rate, molecular weight of polymeric stabilizer (i.e., polyethylene glycol-b-poly(dl-lactide) di-block copolymer; PEG-PLA) and drug-to-copolymer mass ratio all exert a significant impact on the particle size and stability of the generated nanosuspensions. The attainable mean particle size and span of the nanoparticles through optimization of these process parameters were approximately 70nm and 0.85 respectively. However, the optimized nanosuspension was only stable for about two hours after preparation. Co-formulation with polyvinylpyrrolidone (PVP) substantially extended the product lifespan to 5days at ambient conditions and two weeks at 4°C. Results from zeta potential measurement and X-ray photoelectron spectroscopy (XPS) suggested that the enhanced stability is probably due to the formation of an additional protective barrier by PVP around the particle surface, thereby suppressing the dissociation of PEG-PLA from the particles and preventing CUR leakage from inside. Long-term storage stability (>1year) could be achieved by lyophilization of the optimized nanosuspension with Kleptose (hydroxypropyl-β-cyclodextrin), which was shown to be the only effective lyoprotectant among all the ones tested for the CUR nanoparticles. At an optimal concentration of Kleptose (1.25% w/v), the redispersibility (Sf/Si; ratio of the final and initial particle sizes) and encapsulation efficiency of lyophilized CUR nanoparticles were about 1.22% and 94%, respectively.

A novel evaporation detection system using an impedance sensing chip

This paper presents a novel real-time impedance sensing chip for the evaporation detection of small volume solutions. Time sharing detection is performed for multiple sample measurements by a relay switching technique. In contrast to a conventional weight loss approach, the advantage of this proposed impedance sensing system is that it not only merely requires as little as 0.5 mL of test samples, but also provides high sensitivity and fast detection. More importantly, this proposed impedance sensing chip has advantages of a small chip size and easy decomposition for cleaning and reuse.

Multifunctional materials for bone cancer treatment

The purpose of this review is to present the most recent findings in bone tissue engineering. Special attention is given to multifunctional materials based on collagen and collagen-hydroxyapatite composites used for skin and bone cancer treatments. The multi-functionality of these materials was obtained by adding to the base regenerative grafts proper components, such as ferrites (magnetite being the most important representative), cytostatics (cisplatin, carboplatin, vincristine, methotrexate, paclitaxel, doxorubicin), silver nanoparticles, antibiotics (anthracyclines, geldanamycin), and/or analgesics (ibuprofen, fentanyl). The suitability of complex systems for the intended applications was systematically analyzed. The developmental possibilities of multifunctional materials with regenerative and curative roles (antitumoral as well as pain management) in the field of skin and bone cancer treatment are discussed. It is worth mentioning that better materials are likely to be developed by combining conventional and unconventional experimental strategies.

Multifunctional star-shaped polylactic acid implants for use in angioplasty

Star-shaped polylactic acids with different tacticity were synthesized and both polymers are capable of bestowing properties of anticoagulation and angiogenesis to their living host.

Development and characterization of novel polyurethane films impregnated with tolfenamic acid for therapeutic applications

The present study deals with the preparation of polyurethane (PU) films impregnated with a nonsteroidal anti-inflammatory drug, tolfenamic acid (TA). Solvent evaporation technique has been employed for the preparation of TA-PU films in two different ratios of 1 : 2 and 1 : 5 in Tetrahydrofuran (THF) or THF-ethanol mixtures. The prepared films were characterized using X-Ray Diffraction (XRD), Differential Scanning Calorimetry (DSC), Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), and release studies. The results indicate transformation of crystalline TA to its amorphous form. The degree of crystallinity changes both by increasing the polymer concentration and solvent used for the film preparations. The release profiles of TA were also found to be affected, showing a decrease from approximately 50% to 25% from 1 : 2 to 1 : 5 ratios, respectively.