Streptavidin-coated TiO2 surfaces are biologically inert: Protein adsorption and osteoblast adhesion studies

An α-helical peptide-based plasmonic biosensor for highly specific detection of α-synuclein toxic oligomers

BACKGROUND

α-Synuclein (αS) aggregation is the main neurological hallmark of a group of neurodegenerative disorders, collectively referred to as synucleinopathies, of which Parkinson's disease (PD) is the most prevalent. αS oligomers are elevated in the cerebrospinal fluid (CSF) of PD patients, standing as a biomarker for disease diagnosis. However, methods for early PD detection are still lacking. We have recently identified the amphipathic 22-residue peptide PSMα3 as a high-affinity binder of αS toxic oligomers. PSMα3 displayed excellent selectivity and reproducibility, binding to αS toxic oligomers with affinities in the low nanomolar range and without detectable cross-reactivity with functional monomeric αS.

RESULTS

In this work, we leveraged these PSMα3 unique properties to design a plasmonic-based biosensor for the direct detection of toxic oligomers under label-free conditions.

SIGNIFICANCE AND NOVELTY

We describe the integration of the peptide in a lab-on-a-chip plasmonic platform suitable for point-of-care measurements of αS toxic oligomers in CSF samples in real-time and at an affordable cost, providing an innovative biosensor for PD early diagnosis in the clinic.

Gold Nanoparticle Enabled Localized Surface Plasmon Resonance on Unique Gold Nanomushroom Structures for On-Chip CRISPR-Cas13a Sensing

A novel localized surface plasmon resonance (LSPR) system based on the coupling of gold nanomushrooms (AuNMs) and gold nanoparticles (AuNPs) is developed to enable a significant plasmonic resonant shift. The AuNP size, surface chemistry, and concentration are characterized to maximize the LSPR effect. A 31 nm redshift is achieved when the AuNMs are saturated by the AuNPs. This giant redshift also increases the full width of the spectrum and is explained by the 3D finite-difference time-domain (FDTD) calculation. In addition, this LSPR substrate is packaged in a microfluidic cell and integrated with a CRISPR-Cas13a RNA detection assay for the detection of the SARS-CoV-2 RNA targets. Once activated by the target, the AuNPs are cleaved from linker probes and randomly deposited on the AuNM substrate, demonstrating a large redshift. The novel LSPR chip using AuNP as an indicator is simple, specific, isothermal, and label-free; and thus, provides a new opportunity to achieve the next generation multiplexing and sensitive molecular diagnostic system.

Immobilization of recombinant lysostaphin on nanoparticle through biotin-streptavidin conjugation technology as a geometrical progressed confrontation against Staphylococcus aureus infection

Antibiotic resistance and the colonization of resistant bacteria such as Staphylococcus aureus on surfaces, often in the form of biofilms, prolong hospitalization periods and increase mortality, thus is a significant concern for healthcare providers. To prevent biofilm formation, the inadequate concentration of using nanoparticles as antibacterial coating agents is one of the major obstacles. This study aimed to design a hypervalency TiO₂ nanocomposite as a reserved base to carry a high amount of active antibacterial agents such as lysostaphin via a biotin-streptavidin-biotin bridge. The utilization of the streptavidin-biotin system could increase the abundance of lysostaphin. Lysostaphin was expressed in Escherichia coli and purified. Both recombinant lysostaphin and titanium oxide nanocomposite were conjugated with biotin and linked to a streptavidin bridge. The kinetics and activity of the enzyme were examined after each step utilizing N-acetylhexaglycine as a substrate. Physical characteristics of nanoparticles containing lysostaphin were determined using AFM, SEM, FTIR, and zeta potential. The results showed changes in size, charge, and morphology of the nanoparticles following the lysostaphin attachment. Also, the stability and kinetics of the active biological enzymes on nanoparticles were reexamined following 8 months of storage. Exploiting this approach, various biotinylated antibacterial agents could be prepared and rapidly immobilized on a nanoparticle as an active net against related infectious agents.

Enhanced selective cellular proliferation by multi-biofunctionalization of medical implant surfaces with heterodimeric BMP-2/6, fibronectin, and FGF-2

Increasing cell adhesion on implant surfaces is an issue of high biomedical importance. Early colonization with endogenous cells reduces the risk of bacterial contamination and enhances the integration of an implant into the diverse cellular tissues surrounding it. In vivo integration of implants is controlled by a complex spatial and temporal interplay of cytokines and adhesive molecules. The concept of a multi-biofunctionalized TiO₂ surface for stimulating bone and soft tissue growth is presented here. All supramolecular architectures were built with a biotin-streptavidin coupling system. Biofunctionalization of TiO₂ with immobilized FGF-2 and heparin could be shown to selectively increase the proliferation of fibroblasts while immobilized BMP-2 only stimulated the growth of osteoblasts. Furthermore, TiO₂ surfaces biofunctionalized with either the BMP-2 or BMP-2/6 growth factor and the cell adhesion-enhancing protein fibronectin showed higher osteoblast adhesion than a TiO₂ surface functionalized with only one of these proteins. In conclusion, the presented immobilization strategy is applicable in vivo for a selective surface coating of implants in both hard and connective tissue. The combined immobilization of different extracellular proteins on implants has the potential to further influence cell-specific reactions. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2910-2922, 2018.

Osseoconductivity of a Specific Streptavidin-Biotin-Fibronectin Surface Coating of Biotinylated Titanium Implants - A Rabbit Animal Study

BACKGROUND

Biofunctionalized implant surfaces may accelerate bony integration and increase long-term stability.

PURPOSE

The aim of the study was to evaluate the osseous reaction toward biomimetic titanium implants surfaces coated with quasicovalent immobilized fibronectin in an in vivo animal model.

MATERIALS AND METHODS

A total of 84 implants (uncoated [control 1, n = 36], streptavidin-biotin coated [test 1, n = 24], streptavidin-biotin-fibronectin coated [test 2, n = 24]) were inserted 1 mm supracortically in the proximal tibia of 12 rabbits. The samples were examined after 3 and 6 weeks. Total bone-implant contact (tBIC; %), bone-implant contact in the cortical (cBIC; %) and in the spongious bone (sBIC; %) as well as the percentage of linear bone fill (PLF; %) were evaluated.

RESULTS

After 3 weeks, streptavidin-biotin-fibronectin implants had a significant higher sBIC (p = .043) and PLF (p = .007) compared with the uncoated samples. After 6 weeks, this difference was significant for tBIC (p = .016) and cBIC (p < .001). Additionally, uncoated screws showed a significant higher sBIC when compared with the fibronectin coating (p < .001). Streptavidin-biotin-coated implants showed less bone growth at both time points of all examined parameters when compared with their counterparts (all p < .001).

CONCLUSIONS

Quasicovalent immobilization of biotinylated fibronectin with the streptavidin-biotin-fibronectin system on smooth surface titanium shows a beneficial faster osseous healing in vivo. Besides, an antifouling effect of the streptavidin-biotin coating was proven.

Mesopattern of immobilised bone morphogenetic protein-2 created by microcontact printing and dip-pen nanolithography influence C2C12 cell fate

Making meso matter: bone morphogenetic protein-2 (BMP-2) mesopattern created by dip-pen nanolithography and microcontact printing were applied to cell differentiation.

Layer-by-layer assembly of a streptavidin-fibronectin multilayer on biotinylated TiO(X)

The biomodification of surfaces, especially titanium, is an important issue in current biomedical research. Regarding titanium, it is also important to ensure a specific protein modification of its surface because here protein binding that is too random can be observed. Specific nanoscale architectures can be applied to overcome this problem. As recently shown, streptavidin can be used as a coupling agent to immobilize biotinylated fibronectin (bFn) on a TiO(X) surface. Because of the conformation of adsorbed biotinylated fibronectin on a streptavidin monolayer, it is possible to adsorb more streptavidin and biotinylated fibronectin layers. On this basis, an alternating protein multilayer can be built up. In contrast to common layer-by-layer technology, in this procedure the mechanism of layer adsorption is very specific because of the interaction of biotin and streptavidin. In addition, we showed that the assembly of this multilayer system and its stability are dependent on the degree of labeling of biotinylated fibronectin. Hence we conclude that it is possible to build up well-defined nanoscale protein architectures by varying the degree of labeling of biotinylated fibronectin.