Surface characteristics and primary bone marrow stromal cell response of a nanostructured strontium-containing oxide layer produced on a microrough titanium surface

Advancements in incorporating metal ions onto the surface of biomedical titanium and its alloys via micro-arc oxidation: a research review

The incorporation of biologically active metallic elements into nano/micron-scale coatings through micro-arc oxidation (MAO) shows significant potential in enhancing the biological characteristics and functionality of titanium-based materials. By introducing diverse metal ions onto titanium implant surfaces, not only can their antibacterial, anti-inflammatory and corrosion resistance properties be heightened, but it also promotes vascular growth and facilitates the formation of new bone tissue. This review provides a thorough examination of recent advancements in this field, covering the characteristics of commonly used metal ions and their associated preparation parameters. It also highlights the diverse applications of specific metal ions in enhancing osteogenesis, angiogenesis, antibacterial efficacy, anti-inflammatory and corrosion resistance properties of titanium implants. Furthermore, the review discusses challenges faced and future prospects in this promising area of research. In conclusion, the synergistic approach of micro-arc oxidation and metal ion doping demonstrates substantial promise in advancing the effectiveness of biomedical titanium and its alloys, promising improved outcomes in medical implant applications.

Surface-modified titanium and titanium-based alloys for improved osteogenesis: A critical review

As implantable materials, titanium, and its alloys have garnered enormous interest from researchers for dental and orthopedic procedures. Despite their success in wide clinical applications, titanium, and its alloys fail to stimulate osteogenesis, resulting in poor bonding strength with surrounding bone tissue. Optimizing the surface topology and altered compositions of titanium and titanium-based alloys substantially promotes peri-implant bone regeneration. This review summarizes the utilization and importance of various osteogenesis components loaded onto titanium and its alloys. Further, different surface-modification methods and the release efficacy of loaded substances are emphasized. Finally, we summarize the article with prospects. We believe that further investigation studies must focus on identifying novel loading components, exploring various innovative, optimized surface-modification methods, and developing a sustained-release system on implant surfaces to improve peri-implant bone formation.

Alkaline earth metals for osteogenic scaffolds: From mechanisms to applications

Regeneration of bone defects is a significant challenge today. As alternative approaches to the autologous bone, scaffold materials have remarkable features in treating bone defects; however, the various properties of current scaffold materials still fall short of expectations. Due to the osteogenic capability of alkaline earth metals, their application in scaffold materials has become an effective approach to improving their properties. Furthermore, numerous studies have shown that combining alkaline earth metals leads to better osteogenic properties than applying them alone. In this review, the physicochemical and physiological characteristics of alkaline earth metals are introduced, mainly focusing on their mechanisms and applications in osteogenesis, especially magnesium (Mg), calcium (Ca), strontium (Sr), and barium (Ba). Furthermore, this review highlights the possible cross-talk between pathways when alkaline earth metals are combined. Finally, some of the current drawbacks of scaffold materials are enumerated, such as the high corrosion rate of Mg scaffolds and defects in the mechanical properties of Ca scaffolds. Moreover, a brief perspective is also provided regarding future directions in this field. It is worth exploring that whether the levels of alkaline earth metals in newly regenerated bone differs from those in normal bone. The ideal ratio of each element in the bone tissue engineering scaffolds or the optimal concentration of each elemental ion in the created osteogenic environment still needs further exploration. The review not only summarizes the research developments in osteogenesis but also offers a direction for developing new scaffold materials.

Synergistic effect of nanostructure and calcium ions on improving the bioactivity of titanium implants

Surface structure and composition play essential roles in the osseointegration of titanium implants. In the present study, a nanoscale surface structure incorporated with calcium ions was fabricated on a titanium surface by hydrothermal treatment. The characteristics of the surfaces were analysed, and the bioactivity of the samples was evaluated in vitro and in vivo. nm-Ti and nm/Ca-Ti surfaces were significantly more hydrophilic than control-Ti surfaces. nm/Ca-Ti samples showed much faster bone-like apatite precipitation in simulated body fluid than the other samples. The results of MC3T3-E1 cell tests demonstrated that both nm-Ti and nm/Ca-Ti surfaces accelerated cell adhesion and proliferation. The highest level of osteogenesis-related genes (Runx2, bone morphogenetic protein-2, osteopontin and osteocalcin) were observed in nm/Ca-Ti samples, followed by nm-Ti samples. Alizarin red staining experiment showed that the amount of extracellular matrix mineralized nodules in nm/Ca-Ti group was significantly higher than others. In animal experiments using SD rats, nm/Ca-Ti showed the highest value of new bone formation at two and four weeks. The present study suggested that the nanostructure and calcium ions showed synergetic effects on accelerating bone-like apatite precipitation and osteoblast cell growth and differentiation. Animal experiment further indicated that such surface could promote early osteogenesis.

Synergistic effect of nanostructure and calcium ions on improving the bioactivity of titanium implants

Surface structure and composition play essential roles in the osseointegration of titanium implants. In the present study, a nanoscale surface structure incorporated with calcium ions was fabricated on a titanium surface by hydrothermal treatment. The characteristics of the surfaces were analysed, and the bioactivity of the samples was evaluated in vitro and in vivo. nm-Ti and nm/Ca-Ti surfaces were significantly more hydrophilic than control-Ti surfaces. nm/Ca-Ti samples showed much faster bone-like apatite precipitation in simulated body fluid than the other samples. The results of MC3T3-E1 cell tests demonstrated that both nm-Ti and nm/Ca-Ti surfaces accelerated cell adhesion and proliferation. The highest level of osteogenesis-related genes (Runx2, bone morphogenetic protein-2, osteopontin and osteocalcin) were observed in nm/Ca-Ti samples, followed by nm-Ti samples. Alizarin red staining experiment showed that the amount of extracellular matrix mineralized nodules in nm/Ca-Ti group was significantly higher than others. In animal experiments using SD rats, nm/Ca-Ti showed the highest value of new bone formation at two and four weeks. The present study suggested that the nanostructure and calcium ions showed synergetic effects on accelerating bone-like apatite precipitation and osteoblast cell growth and differentiation. Animal experiment further indicated that such surface could promote early osteogenesis.

Immunomodulation and osseointegration activities of Na2TiO3 nanorods-arrayed coatings doped with different Sr content

To endow Ti-based orthopedic implants immunomodulatory capability and thus enhanced osseointegration, different amounts of Sr are doped in Na2TiO3 nanorods in the arrays with identical nanotopographic parameters (rod diameter, length and inter-rod spacing) by substitution of Na+ using hydrothermal treatment. The obtained arrays are denoted as STSr2, STSr4, and STSr7, where the arabic numbers indicate the incorporating amounts of Sr in Na2TiO3. The modulation effects of the Sr-doped nanorods arrays on macrophage polarization and osteogenetic functions of osteoblasts are investigated, together with the array without Sr (ST). Moreover, osseointegration of these arrays are also assayed in rat femoral condyles. Sr-doped nanorods arrays accelerate M1 (pro-inflammatory phenotype)-to-M2 (anti-inflammatory phenotype) transformation of the adhered macrophages, enhancing secretion of pro-osteogenetic cytokines and growth factors (TGF-β1 and BMP2), moreover, the Sr doped arrays directly enhance osteogenetic functions of osteoblasts. The enhancement of paracrine of M2 macrophages and osteogenetic function of osteoblasts is promoted with the increase of Sr incorporating amounts. Consequently, Sr doped arrays show significantly enhanced osseointegration in vivo compared to ST, and STSr7 exhibits the best performance. Our work sheds a new light on the design of surface chemical components and structures for orthopedic implants to enhance their osseointegration.

Bioactive coatings with anti-osteoclast therapeutic agents for bone implants: Enhanced compliance and prolonged implant life

The use of therapeutic agents that inhibit bone resorption is crucial to prolong implant life, delay revision surgery, and reduce the burden on the healthcare system. These therapeutic agents include bisphosphonates, various nucleic acids, statins, proteins, and protein complexes. Their use in systemic treatment has several drawbacks, such as side effects and insufficient efficacy in terms of concentration, which can be eliminated by local treatment. This review focuses on the incorporation of osteoclast inhibitors (antiresorptive agents) into bioactive coatings for bone implants. The ability of bioactive coatings as systems for local delivery of antiresorptive agents to achieve optimal loading of the bioactive coating and its release is described in detail. Various parameters such as the suitable concentrations, release times, and the effects of the antiresorptive agents on nearby cells or bone tissue are discussed. However, further research is needed to support the optimization of the implant, as this will enable subsequent personalized design of the coating in terms of the design and selection of the coating material, the choice of an antiresorptive agent and its amount in the coating. In addition, therapeutic agents that have not yet been incorporated into bioactive coatings but appear promising are also mentioned. From this work, it can be concluded that therapeutic agents contribute to the biocompatibility of the bioactive coating by enhancing its beneficial properties.

Effect of micro/nanoscaled Ti phosphate/Ti oxide hybrid coating on the osseointegration of Ti implants

OBJECTIVES

This study was performed to fabricate a bionic coating with titanium (Ti) phosphate to promote the osseointegration of Ti substrate implants.

METHODS

Phosphorylated micro/nanocoating was prepared on the surface of pure titanium (i.e., TiP-Ti) by hydrothermal process under special pressure, and the untreated smooth pure titanium (cp-Ti) was selected as the control. To evaluate the characteristics of the coating surface, scanning electron microscopy, X-ray diffraction, atomic force microscopy, and contact-angle measurement were performed. In addition, the effects of TiP-Ti on the proliferation, adhesion, and differentiation of rat bone marrow mesenchymal stem cells (BMSCs) were investigated by using in vitro cytology. Finally, TiP-Ti implants were implanted into the rat tibia, and the effect of TiP-Ti on the osseointegration in the host was evaluated after 12 weeks.

RESULTS

The TiP-Ti surface presented a bionic structure with coexisting nanoscale 3D spatial structure and microscale pores. In vitro experiments showed that the BMSCs had enhanced adhesion, proliferation, and osteogenic differentiation on the TiP-Ti surface. Furthermore, in vivo, TiP-Ti showed considerably stronger osseointegration compared with pure titanium, and the ultimate shear strength and maximum pushing force were significantly improved.

CONCLUSIONS

A bionic structure with TiP-Ti micro/nanoscale coating was successfully fabricated, indicating a promising method for modifying the surface of implants.

3D magnetic nanocomposite scaffolds enhanced the osteogenic capacities of rat bone mesenchymal stem cells in vitro and in a rat calvarial bone defect model by promoting cell adhesion

Magnetic scaffolds incorporated with iron oxide nanoparticles (IONPs) are biocompatible and present excellent osteogenic properties. However, the underlying mechanism is unclear. In this study, 3D-printed poly(lactic-co-glycolic acid) scaffolds were coated with IONPs using layer-by-layer assembly (Fe-scaffold) to prepare magnetic scaffolds. The effects of this modification on osteogenesis were investigated by comparison with untreated scaffolds (Uncoated-scaffold). The results showed that the proliferation of rat bone mesenchymal stem cells (rBMSCs) on the Fe-scaffold was enhanced compared with those on the Uncoated-scaffold (p < 0.05). The alkaline phosphatase activity and expression levels of osteogenic-related genes of cells on the Fe-scaffold were higher than those on the Uncoated-scaffold (p < 0.05). Fe-scaffold was found to promote the cell adhesion compared with Uncoated-scaffold, including increasing the adhered cell number, promoting cell spreading and upregulating the expression levels of adhesion-related genes integrin α1 and β1 and their downstream signaling molecules FAK and ERK1/2 (p < 0.05). Moreover, the amount of new bone formed in rat calvarial defects at 8 weeks decreased in the order: Fe-scaffold > Uncoated-scaffold > Blank-control (samples whose defects were left empty) (p < 0.05). Therefore, 3D magnetic nanocomposite scaffolds enhanced the osteogenic capacities of rBMSCs in vitro and in a rat calvarial bone defect model by promoting cell adhesion. The mechanisms were attributed to the alteration in its hydrophilicity, surface roughness, and chemical composition.

The Fabrication and Function of Strontium-modified Hierarchical Micro/Nano Titanium Implant

Background

Relying on surface topography alone to enhance the osteointegration of implants is still inadequate. An effective way to combine long-term ion release and surface topography to enhance osteogenic property is urgently needed.

Purpose

The objective of this study is to fabricate a long-term strontium ion release implant system and confirm the biological function in vitro and in vivo.

Methods

The biomimic surface was fabricated through alkali-heat treatment and magnetron sputtering. The in vitro biological function assays were determined by MTT, fluorescence staining, alkaline phosphatase activity, extracellular mineralization, and quantitative real-time polymerase chain reaction assays. The in vivo experiments were detected by micro-CT, HE staining and Masson staining.

Results

The biomimic surface structure has been successfully fabricated. The in vitro cell assays determined that AH-Ti/Sr90 possessed the best biological function. The in vivo experiments demonstrated that AH-Ti/Sr90 could promote osteointegration significantly under both in normal and osteoporotic conditions.

Conclusion

We determined that AH-Ti/Sr90 possesses the best osteogenic property, long-term ion release capacity and osteointegration promotion ability. It has potential clinic application prospects.

Point your SmartPhone at the code above. If you have a QR code reader the video abstract will appear. Or use:

https://youtu.be/-6Wh1MOigI0

Tri-Functional Calcium-Deficient Calcium Titanate Coating on Titanium Metal by Chemical and Heat Treatment

The main problem of orthopedic and dental titanium (Ti) implants has been poor bone-bonding to the metal. Various coatings to improve the bone-bonding, including the hydroxyapatite and titania, have been developed, and some of them have been to successfully applied clinical use. On the other hand, there are still challenges to provide antibacterial activity and promotion of bone growth on Ti. It was shown that a calcium-deficient calcium titanate coating on Ti and its alloys exhibits high bone-bonding owing to its apatite formation. In this study, Sr and Ag ions, known for their promotion of bone growth and antibacterial activity, were introduced into the calcium-deficient calcium titanate by a three-step aqueous solution treatment combined with heat. The treated metal formed apatite within 3 days in a simulated body fluid and exhibited antibacterial activity to Escherichia coli without showing any cytotoxicity in MC3T3-E1 preosteoblast cells. Furthermore, the metal slowly released 1.29 ppm of Sr ions. The Ti with calcium-deficient calcium titanate doped with Sr and Ag will be useful for orthopedic and dental implants, since it should bond to bone because of its apatite formation, promote bone growth due to Sr ion release, and prevent infection owing to its antibacterial activity.

Polydopamine-Assisted Anchor of Chitosan onto Porous Composite Scaffolds for Accelerating Bone Regeneration

Surface function has an importance for the bioactivity of porous polymeric scaffolds. The goal of the present study is to immobilize highly bioactive chitosan (CS) onto the surface of porous composite scaffolds to accelerate bone regeneration. Porous poly(ε-caprolactone) (PCL)/bioactive glass (BG) composite scaffolds with strong anchor of CS were fabricated via mussel-inspired polydopamine (PDA) coating as a bridging layer. In vitro cell culture showed that firm immobilization of CS onto the composite scaffolds significantly enhanced protein adsorption, cell adhesion, and osteogenic differentiation compared to CS-decorated scaffolds via physical adsorption. In vivo assessments demonstrated that covalent immobilization of CS onto the surface of scaffolds obviously promoted cranial bone regeneration in comparison with the counterparts with physical adsorption of CS. The proposed method offers a feasible and effective means to fabricate artificial bioactive scaffolds for bone tissue engineering application.

Positive modulation of osteogenesis on a titanium oxide surface incorporating strontium oxide: An in vitro and in vivo study

Surface chemistry and topography can determinatively affect the osseointegration of dental implants. Strontium (Sr) has a significant effect on the promotion of bone formation and inhibitation of bone resorption. The emphasis of this study lies on the evaluation of a new surface treatment that aims to improve the early osseointegration of dental implantation both in vitro and in vivo. A hydrothermal method was used to prepare an SrTiO₃ incorporation on sandblasted large-grit double acid-etched (SLA) titanium surfaces in SrCl₂ solution. The composition and morphology of the SrTiO₃ doped surface were analyzed by X-ray diffraction, X-ray photoelectron spectroscopy，and scanning electron microscopy. In addition, the external release figure of Sr was examined by inductively coupled plasma mass spectrometry. The proliferation, adhesion and differentiation of MC3T3-E1 cells on this surface were evaluated in vitro and presented a significant increase in SLA-Sr group compared with that in SLA group. An in vivo study in 24 New Zealand rabbits indicated a remarkable growth in the volume of direct bone-to-implant contact and peri-implant bone in SLA-Sr group, which were compared with SLA group after 3 and 6 weeks, and removal torque tests exhibited a higher torque removal value of SLA-Sr implants. The study gave the result that the biological effect of SLA-Sr implants was significantly superior to that of the SLA implants at the early stage of osseointegration.

Promoting Osseointegration of Ti Implants through Micro/Nanoscaled Hierarchical Ti Phosphate/Ti Oxide Hybrid Coating

In this study, micro/nanoscaled hierarchical hybrid coatings containing titanium (Ti) phosphate and Ti oxide have been fabricated with the aim of promoting osseointegration of Ti-based implants. Three representative surface coatings, namely, micro/nanograss Ti (P-G-Ti), micro/nanoclump Ti, (P-C-Ti), and micro/nanorod Ti (P-R-Ti), have been produced. In-depth investigations into the coating surface morphology, topography, chemical composition, and the surface/cell interaction have been carried out using scanning electron microscopy, transmission electron microscope, X-ray photoelectron spectroscopy, X-ray diffraction, contact-angle measurement, and protein adsorption assay. In addition, in vitro performance of the coating (cell proliferation, adhesion, and differentiation) has been evaluated using rat bone marrow stromal cells (BMSCs), and in vivo assessments have been carried out based on a rat tibia implantation model. All the hybrid coating modified implants demonstrated enhanced protein adsorption and BMSC viability, adhesion and differentiation, with P-G-Ti showing the best bioactivity among all samples. Subsequent i n vivo osseointegration tests confirmed that P-G-Ti has induced a much stronger interfacial bonding with the host tissue, indicated by the 2-fold increase in the ultimate shear strength and over 6-fold increase in the maximum push-out force compared to unmodified Ti implants. The state-of-the-art coating technology proposed for Ti-based implants in this study holds great potential in advancing medical devices for next-generation healthcare technology.

Sr-doped nanowire modification of Ca-Si-based coatings for improved osteogenic activities and reduced inflammatory reactions

Biomedical coatings for orthopedic implants should facilitate osseointegration and mitigate implant-induced inflammatory reactions. In our study, Ca-Si coatings with Sr-containing nanowire-like structures (NW-Sr-CS) were achieved via hydrothermal treatment. In order to identify the effect of nanowire-like topography and Sr dopant on the biological properties of Ca-Si-based coatings, the original Ca-Si coating, Ca-Si coatings modified with nanoplate (NP-CS) and similar nanowire-like structure (NW-CS) were fabricated as the control. Surface morphology, phase composition, surface area, zeta potential and ion release of these coatings were characterized. The in vitro osteogenic activities and immunomodulatory properties were evaluated with bone marrow stromal cells (BMSCs) and RAW 264.7 cells, a mouse macrophage cell line. Compared with the CS and NP-CS coatings, the NW-CS coating possessed a larger surface area and pore volume, beneficial protein adsorption, up-regulated the expression levels of integrin β1, Vinculin and focal adhesion kinase and promoted cell spreading. Furthermore, the NW-CS coating significantly enhanced the osteogenic differentiation and mineralization as indicated by the up-regulation of ALP activity, mineralized nodule formation and osteoblastogenesis-related gene expression. With the introduction of Sr, the NW-Sr-CS coatings exerted a greater effect on the BMSC proliferation rate, calcium sensitive receptor gene expression as well as PKC and ERK1/2 phosphorylation. In addition, the Sr-doped coatings significantly up-regulated the ratio of OPG/RANKL in the BMSCs. The NW-Sr-CS coatings could modulate the polarization of macrophages towards the wound-healing M2 phenotype, reduce the mRNA expression levels of pro-inflammatory cytokines (TNF-α, IL-1β, IL-6) and enhance anti-inflammatory cytokines (IL-1ra, IL-10). The Sr-doped nanowire modification may be a valuable approach to enhance osteogenic activities and reduce inflammatory reactions.

Strontium and magnesium ions released from bioactive titanium metal promote early bone bonding in a rabbit implant model

We have previously developed the "alkali and heat treatment" method to confer bioactivity (bone-bonding ability) to titanium metal (Ti). As strontium (Sr) and magnesium (Mg) ions reportedly promote osteoblastic cell proliferation and differentiation and accelerate bone formation, we improved this method to induce the release of Sr (Sr-Ti) or Mg (Mg-Ti) ions from Ti in a previous study. Here, we evaluated the bioactivity of these novel surface treatments, Sr-Ti and Mg-Ti. In vitro evaluation of cell viability, expression of integrin β1, β catenin, and cyclin D1, osteogenic gene expression, alkaline phosphatase activity, and extracellular mineralization using MC3T3-E1 cells revealed that Sr-Ti and Mg-Ti enhanced proliferation and osteogenic differentiation. In rabbit in vivo studies, Sr-Ti and Mg-Ti also provided greater biomechanical strength and bone-implant contact than the positive control Ti (Ca-Ti), especially at the early stage (4-8weeks), and maintained these properties for a longer period (16-24weeks). Advantages of the improved method include process simplicity, applicability for any implant shape, and lack of adverse effects on implant composition and structure. Therefore, our treatment is promising for clinical applications to achieve early bone bonding.

STATEMENT OF SIGNIFICANCE

Implantation into osteoporotic bone constitutes a challenging problem because of early migration or loosening of the implant, which is primarily due to insufficient initial fixation in porotic bone. Therefore, it is desirable to provide implants with a capacity for early bone bonding. We have achieved conferring early bone bonding ability to titanium metal by releasing strontium ions or magnesium ions. Our treatment is promising for clinical applications to achieve early bone bonding of orthopedic or dental Ti-based implants.

Positive effect of strontium-oxide layer on the osseointegration of moderately rough titanium surface in non-osteoporotic rabbits

OBJECTIVES

To evaluate the effect of strontium-oxide layer on new bone formation and osseointegration of sandblasted large-grit double-acid-etched (SLA) implant.

MATERIAL AND METHODS

Strontium-oxide layer on the SLA surface was produced by hydrothermal treatment using a Sr-containing solution. The surface topographies, roughness, hardness values, chemical elements and ionic release of SLA and the strontium-containing SLA (Sr-SLA) surface were measured by special instruments separately. Sixty-four SLA and Sr-SLA implants were inserted into the proximal tibiae and femoral condyles of sixteen non-osteoporotic New Zealand white rabbits. The biological effects were evaluated by removal torque (RTQ) testing and histomorphometric analysis after 3 and 6 weeks of implantation.

RESULTS

The surface characteristics showed Sr-SLA surfaces with dotted nanostructures can release appropriate amount of strontium ions into surrounding tissue till 14 days. In vivo, the Sr-SLA implants presented significantly higher RTQ than SLA implants at 3 and 6 weeks (P < 0.05). The Sr-SLA implants presented higher bone-to-implant contact (BIC) than SLA implants in cortical bone at 3 and 6 weeks (P < 0.05). The bone area was slightly higher for the Sr-SLA implants at 3 and 6 weeks (P > 0.05).

CONCLUSIONS

The strontium-oxide layer on the SLA surface has the potential to improve implant osseointegration in non-osteoporotic rabbits.

In Vitro and in Vivo Evaluation of Silicate-Coated Polyetheretherketone Fabricated by Electron Beam Evaporation

Intrinsic bioinertness severely hampers the application of polyetheretherketone (PEEK), although in the field of dentistry it is considered to be an ideal titanium substitute implanting material. In this study, a bioactive silicate coating was successfully introduced onto PEEK surface by using electron beam evaporation (EBE) technology to improve its bioactivity and osseointegration of PEEK. Through controlling the duration of EBE, the incorporated amounts of silicon (Si) could be exquisitely adjusted to obtain proper biofunctionality, as assessed by cell adhesion, proliferation, osteogenic gene expression, and protein detection. In vivo, the samples were then tested in a femur implantation model to assay osseointegration effects in ovariectomized (OVX) rats. Remarkable enhancement of adhesion, spreading, osteogenesis, and differentiation of bone marrow stem cells (rBMSCs-OVX) were noted on silicate-coated samples. In particular, the group that was processed for 5 min with EBE (EBE-5 min) showed the most improvements in ALP activity and osteogenic-related gene expression compared to the remaining groups. Better osseointegration of the group that was processed for 8 min with EBE (EBE-8 min) was observed in vivo, as indicated by micro-CT test, fluorescent labeling, and histological and histomorphometric analyses. Collectively, the outcomes of the above experiments demonstrate that the present work is a meaningful attempt to promote osseointegration under osteoporotic conditions with only Si element incorporated to PEEK surface by the application of EBE technique. To the best of our knowledge, this work is the first demonstration of tuning the surface properties of PEEK via the adoption of an EBE-fabricated silicate coating to address an osteoporotic problem both in vitro and in vivo.

Strontium delivery on topographical titanium to enhance bioactivity and osseointegration in osteoporotic rats

Strontium-substituted hierarchical Ti surface can enhance the osseointegration by both increasing new bone formation and reducing bone resorption under osteoporotic conditions.

Investigating the biological response of human mesenchymal stem cells to titanium surfaces

BACKGROUND

We have investigated the behaviour of a newly characterised population of haemarthrosis fluid-derived human mesenchymal stem cells (HF-hMSCs) with titanium (Ti) surfaces.

METHODS

HF-hMSCs were seeded onto round cannulated interference (RCI; Smith and Nephew) screws or control Ti discs and cultured under pro-osteogenic conditions.

RESULTS

Electron microscopy showed the attachment and spreading of HF-hMSCs across both Ti surfaces during the early stages of osteogenic culture; however, cells were exclusively localised to the basal regions within the vertex of the Ti screws. In the later stages of culture, an osteoid matrix was deposited on the Ti surfaces with progressive culture expansion and matrix deposition up the sides and the top of the Ti Screws. Quantification of cellular content revealed a significantly higher number of cells within the Ti screw cultures; however, there was no difference in the cellular health. Conversely, alizarin red staining used as both a qualitative and quantitative measure of matrix calcification was significantly increased in Ti disc cultures compared to those of Ti screws.

CONCLUSIONS

Our results suggest that the gross topography of the metal implant is able to create microenvironment niches that have an influence on cellular behaviour. These results have implications for the design of advanced tissue engineering strategies that seek to use cellular material to enhance biological remodelling and healing following tissue reconstruction.

Controlled release of strontium ions from a bioactive Ti metal with a Ca-enriched surface layer

A nanostructured sodium hydrogen titanate layer ∼1μm in thickness was initially produced on the surface of titanium metal (Ti) by soaking in NaOH solution. When the metal was subsequently soaked in a mixed solution of CaCl2 and SrCl2, its Na ions were replaced with Ca and Sr ions in an Sr/Ca ratio in the range 0.18-1.62. The metal was then heat-treated at 600°C to form strontium-containing calcium titanate (SrCT) and rutile on its surface. The treated metal did not form apatite in a simulated body fluid (SBF) even after 7days. When the metal formed with SrCT was subsequently soaked in water at 80°C, the treated metal formed bone-like apatite on its surface within 1day in SBF since the Ca ions were partially replaced with H3O(+) ions. However, it released only 0.06ppm of Sr ions even after 7days in phosphate-buffered saline. When the metal was soaked after the heat treatment in 1M SrCl2 solution instead of water, the treated metal released 0.92ppm of Sr ions within 7days while maintaining its apatite-forming ability. The Ti formed with this kind of bioactive SrCT layer on its surface is expected to be highly useful for orthopedic and dental implants, since it should be able to promote bone growth by releasing Sr ions and tightly bond to the bone through the apatite formed on its surface.

Entangled titanium fibre balls combined with nano strontium hydroxyapatite in repairing bone defects

OBJECTIVE

To investigate the effect of entangled titanium fibre balls (ETFBs) combined with nano strontium hydroxyapatite (nano-Sr-HAP) on the repair of bone defects in vivo.

MATERIALS AND METHODS

Twenty-four 6-month-old, specific pathogen-free, male Sprague-Dawley rats were used. Drill defects were created in bilateral femoral condyles. ETFBs combined with nano-Sr-HAP were selected randomly from 72 samples and implanted into the femoral bone defects of left legs, which served as the experimental group, while ETFBs without nano-Sr-HAP were implanted into right legs for comparison. The bone defects on both sides were X-rayed. The anteroposterior positions and histological procedures and evaluations of each sample were performed at 1, 2, 4 and 8 weeks post-surgery.

RESULTS

Histological results showed that the ETBs allowed new bone to grow within their structure. Additionally, an increase in new bone was seen on the nano-Sr-HAP side compared to the control side. The results of histomorphometric analysis confirmed that the new bone formation on the left side gradually increased with time. There was a statistical increase in new bone at 2, 4 and 8 weeks, and the differences between the two sides were statistically significant at weeks 4 and 8 (p < 0.05 for all comparisons).

CONCLUSION

The results showed that ETFBs possess a unique 3-dimensional interconnective porous structure and have excellent biocompatibility, cell affinity and osteoconductivity, which makes them useful as scaffold materials for repairing bone defects. On the other hand, nano-Sr-HAP improved the bone defect-repairing capacity of the ETFBs, which showed osteoinductive properties.

Periodontal ligament cell behavior on different titanium surfaces

AIM

The purpose of this study was to investigate proliferation, morphology, mineralization and mRNA expressions of mineralized tissue associated proteins of PDL cells on smooth (S), sandblasted small-grit (SSG), sandblasted large-grit (SLG) and sodium titanate (NaTi) coated titanium alloys, in vitro.

METHODS AND MATERIALS

PDL cells were cultured with DMEM media containing 10% FBS on the S, SSG, SLG and NaTi titanium surfaces. PDL cell proliferation, mineralization and immunohistochemistry experiments for Bone Sialoprotein (BSP) were performed. The morphology of the PDL cells was examined using confocal and scanning electron microscopy (SEM). Gene expression profiles of cells were evaluated using a quantitative-polymerase chain reaction (Q-PCR) for type I collagen (COL I), Osteocalcin (OCN), osteopontin (OPN) and Runt-related transcription factor-2 (Runx2) on days 7 and 14.

RESULTS

Proliferation results on days 6 and 10 were similar in groups, while those of day 13 revealed a decrease in the NaTi group when compared to the S group. NaTi surface induced BSP mRNA expression which was correlated with mineralization tests and BSP immunostaining results. Increased Runx2 mRNA expression was also noted in the NaTi surface when compared to other surfaces.

CONCLUSIONS

This study considers the NaTi surface as a potential alternative to SSG and SLG surfaces. This surface might provide a promising environment for PDL ligament-anchored implants.