Osteoblastic cell response on biphasic fluorhydroxyapatite/strontium-substituted hydroxyapatite coatings

Osteoblastic and anti-osteoclastic activities of strontium-substituted silicocarnotite ceramics: In vitro and in vivo studies

Osteoporosis bone defect is a refractory orthopaedic disease which characterized by impaired bone quality and bone regeneration capacity. Current therapies, including antiosteoporosis drugs and artificial bone grafts, are not always satisfactory. Herein, a strontium-substituted calcium phosphate silicate bioactive ceramic (Sr-CPS) was fabricated. In the present study, the extracts of Sr-CPS were prepared for in vitro study and Sr-CPS scaffolds were used for in vivo study. The cytocompatibility, osteogenic and osteoclastogenic properties of Sr-CPS extracts were characterized in comparison to CPS. Molecular mechanisms were also evaluated by Western blot. Sr-CPS extracts were found to promote osteogenesis by upregulating Wnt/β-catenin signal pathways and inhibit osteoclastogenesis through downregulating NF-κB signal pathway. In vivo, micro-CT, histological and histomorphometric observation were conducted after 8 weeks of implantation to evaluate the bone formation using calvarial defects model in ovariectomized rats. Compared with CPS, Sr-CPS significantly promoted critical sized ovariectomy (OVX) calvarial defects healing. Among all the samples, Sr-10 showed the best performance due to a perfect match of bone formation and scaffold degradation rates. Overall, the present study demonstrated that Sr-CPS ceramic can dually modulate both bone formation and resorption, which might be a promising candidate for the reconstruction of osteoporotic bone defect.

•

Easy-to-perform and cost-effective fabrication of Sr-CPS scaffold.

•

Dual modulation of bone formation and resorption.

•

Outstanding performances in the osteoporotic bone defect healing process.

Zn-HA/Bi-HA biphasic coatings on Titanium: Fabrication, characterization, antibacterial and biological activity

Hydroxyapatite (HA) coatings have been of important as biocompatible coatings for dental and bone tissue engineering application. However, the poor antibacterial performance and weak biological activity of HA coatings limited their clinical applications. As a strategy to improve the antibacterial performance and biological activity of HA, Zinc and bismuth ions were incorporated into HA lattice by substituting Ca²⁺ ions, respectively, and thus zinc substituted hydroxyapatite/bismuth substituted hydroxyapatite (Zn-HA/Bi-HA) biphasic coatings on titanium plates with various ratios were fabricated via sol-gel and dip-coating processes. The purity of the Zn-HA and Bi-HA phase was confirmed by X-ray diffraction (XRD) test. The biphasic coatings showed slower dissolution rate than pure HA coating. Furthermore, the Zn-HA/Bi-HA coatings reveal good biomineralization activity in simulated body fluid (SBF) by forming regular spherical apatite agglomerates. Moreover, the biphasic Zn-HA/Bi-HA coatings exhibited that improved antimicrobial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) as compared to pure HA coatings. The CCK-8 assays demonstrate Zn-HA/Bi-HA coatings showed no toxicity to MG63 cells, and the Zn-HA/Bi-HA2 (Zn-HA:Bi-HA=64:1) coating is more effective to enhance the proliferation of MG63 cells compared to other coatings. This finding suggests Zn-HA/Bi-HA biphasic coatings are promising candidates for biomedical applications.

The NATO project: nanoparticle-based countermeasures for microgravity-induced osteoporosis

Recent advances in nanotechnology applied to medicine and regenerative medicine have an enormous and unexploited potential for future space and terrestrial medical applications. The Nanoparticles and Osteoporosis (NATO) project aimed to develop innovative countermeasures for secondary osteoporosis affecting astronauts after prolonged periods in space microgravity. Calcium- and Strontium-containing hydroxyapatite nanoparticles (nCa-HAP and nSr-HAP, respectively) were previously developed and chemically characterized. This study constitutes the first investigation of the effect of the exogenous addition of nCa-HAP and nSr-HAP on bone remodeling in gravity (1 g), Random Positioning Machine (RPM) and onboard International Space Station (ISS) using human bone marrow mesenchymal stem cells (hBMMSCs). In 1 g conditions, nSr-HAP accelerated and improved the commitment of cells to differentiate towards osteoblasts, as shown by the augmented alkaline phosphatase (ALP) activity and the up-regulation of the expression of bone marker genes, supporting the increased extracellular bone matrix deposition and mineralization. The nSr-HAP treatment exerted a protective effect on the microgravity-induced reduction of ALP activity in RPM samples, and a promoting effect on the deposition of hydroxyapatite crystals in either ISS or 1 g samples. The results indicate the exogenous addition of nSr-HAP could be potentially used to deliver Sr to bone tissue and promote its regeneration, as component of bone substitute synthetic materials and additive for pharmaceutical preparation or food supplementary for systemic distribution.

Effect of strontium doping on the biocompatibility of calcium phosphate-coated titanium substrates

BACKGROUND:

Titanium biomedical devices coated with strontium-doped calcium phosphate ceramics can support desirable bone regeneration through anabolic and anti-catabolic effects of strontium and the compositions close to that of natural mineral tissue.

METHODS:

Strontium was doped into the calcium phosphate coating using the cyclic pre-calcification method on the anodized titanium plate. The effects of the different concentration of strontium in treatment solution and cycle numbers of the pre-calcification treatment on the biocompatibility were investigated in terms of the changes in morphology and chemical composition of coating, ion release pattern and cytocompatibility in vitro.

RESULTS:

At a high substitution ratio of strontium in the calcium phosphate coating, the size of precipitated particles was decreased and the solubility of the coating was increased. ASH55 group, which was coated by pre-calcification treatment of 20 cycles in coating solution with Sr:Ca molar ratio of 5:5, exhibited superior cellular attachment at 1 day and proliferation after 7 days of culturing in comparison with the non-doped surface and other doped surfaces.

CONCLUSION:

Sufficient strontium doping concentrations in calcium phosphate coating can enhance cell adhesion and proliferation on the titanium biomedical devices for bone regeneration.

Strontium-loaded titania nanotube arrays repress osteoclast differentiation through multiple signalling pathways: In vitro and in vivo studies

The loosening of implants is an important clinical issue, particularly for patients with osteoporosis. In these patients, an implant should preferably both promote osteoblast differentiation and repress osteoclastic resorption. In the present study, we fabricated coatings containing TiO2 nanotubes (NTs) incorporated with strontium (Sr) on titanium (Ti) surfaces through hydrothermal treatment. The amount of loaded Sr was controlled by hydrothermally treating the samples in a Sr(OH)2 solution for 1 and 3 h (samples NT-Sr1h and NT-Sr3h, respectively) and found that both types of NT-Sr samples inhibited osteoclast differentiation by reducing the expression of osteoclast marker genes. Additionally, this inhibitory effect was mainly attributed to suppression of RANKL-induced activation of nuclear factor-κB (NF-κB). Moreover, NT-Sr also inhibited the Akt and nuclear factor of activated T-cell cytoplasmic 1 (NFATc1) signalling pathways. Interestingly, we also found that NT-Sr promoted RANKL-induced extracellular signal-regulated kinase (ERK) phosphorylation. Using ovariectomised rats as a model, we observed that NT-Sr prevented bone loss in vivo. In conclusion, our findings demonstrate that NT-Sr might effectively inhibit osteoclast differentiation by repressing the NF-κB and Akt/NFATc1 pathways and by negatively regulating the ERK pathway in vitro and in vivo.

Development of Sr-incorporated biphasic calcium phosphate bone cement

To follow the design strategy of traditional biphasic calcium phosphate (BCP) ceramic, in the present study, strontium-doped biphasic calcium phosphate bone cement (Sr-BCPC) composites comprising Sr-β-tricalcium phosphate (TCP)/Sr-hydroxyapatite (HAP) had been prepared for the first time using Sr _x -β-TCP/tetracalcium phosphate (TTCP) as a cement powder and diluted phosphoric acid as a cement liquid. The phase composition, setting time, compressive strength, washout resistance, in vitro degradation rate, microstructure evolutions, hydration dynamics and cytotoxicity of Sr-BCPC at various Sr contents were intensively investigated. It was found that the final cement product was composed of entangled Sr-HAP nano-needles and cobblestone-like Sr-β-TCP sub-micron particles, and the weight percentages in the final cement product after hydration in simulated body fluid for 24 h were in the ranges of 60 wt%-70 wt% Sr-HAP and 30 wt%-40 wt% Sr-β-TCP, respectively. Sr and the concentration of Sr exhibit significant effects on the phase compositions, compressive strength, setting time, in vitro degradation rate and cytotoxicity of the biphasic bone cement. In particular, the degradation rate increased considerably with the increase of the Sr-β-TCP phase. It is anticipated that the introduction of the 'biphasic' design into calcium phosphate bone cements is an effective strategy to improve their degradation properties.

In vitroandin vivocharacterization of strontium-containing calcium sulfate/poly(amino acid) composite as a novel bioactive graft for bone regeneration

Doped strontium enhanced the biological activity of CS/PAA composites for repairing large bone defects.

Processing and Characterization of SrTiO₃-TiO₂ Nanoparticle-Nanotube Heterostructures on Titanium for Biomedical Applications

Surface properties such as physicochemical characteristics and topographical parameters of biomaterials, essentially determining the interaction between the biological cells and the biomaterial, are important considerations in the design of implant materials. In this study, a layer of SrTiO3-TiO2 nanoparticle-nanotube heterostructures on titanium has been fabricated via anodization combined with a hydrothermal process. Titanium was anodized to create a layer of titania (TiO2) nanotubes (TNTs), which was then decorated with a layer of SrTiO3 nanoparticles via hydrothermal processing. SrTiO3-TiO2 heterostructures with high and low volume fraction of SrTiO3 nanoparticle (denoted by 6.3-Sr/TNTs and 1.4-Sr/TNTs) were achieved by using a hydrothermal processing time of 12 and 3 h, respectively. The in vitro biocompatibility of the SrTiO3-TiO2 heterostructures was assessed by using osteoblast cells (SaOS2). Our results indicated that the SrTiO3-TiO2 heterostructures with different volume fractions of SrTiO3 nanoparticles exhibited different Sr ion release in cell culture media and different surface energies. An appropriate volume fraction of SrTiO3 in the heterostructures stimulated the secretion of cell filopodia, leading to enhanced biocompatibility in terms of cell attachment, anchoring, and proliferation on the heterostructure surface.

Preparation and in vitro evaluation of strontium-doped calcium silicate/gypsum bioactive bone cement

The combination of two or more bioactive components with different biodegradability could cooperatively improve the physicochemical and biological performances of the biomaterials. Here we explore the use of α-calcium sulfate hemihydrate (α-CSH) and calcium silicate with and without strontium doping (Sr-CSi, CSi) to fabricate new bioactive cements with appropriate biodegradability as bone implants. The cements were fabricated by adding different amounts (0-35 wt%) of Sr-CSi (or CSi) into the α-CSH-based pastes at a liquid-to-solid ratio of 0.4. The addition of Sr-CSi into α-CSH cements not only led to a pH rise in the immersion medium, but also changed the surface reactivity of cements, making them more bioactive and therefore promoting apatite mineralization in simulated body fluid (SBF). The impact of additives on long-term in vitro degradation was evaluated by soaking the cements in Tris buffer, SBF, and α-minimal essential medium (α-MEM) for a period of five weeks. An addition of 20% Sr-CSi to α-CSH cement retarded the weight loss of the samples to 36% (in Tris buffer), 43% (in SBF) and 54% (in α-MEM) as compared with the pure α-CSH cement. However, the addition of CSi resulted in a slightly faster degradation in comparison with Sr-CSi in these media. Finally, the in vitro cell-ion dissolution products interaction study using human fetal osteoblast cells demonstrated that the addition of Sr-CSi improved cell viability and proliferation. These results indicate that tailorable bioactivity and biodegradation behavior can be achieved in gypsum cement by adding Sr-CSi, and such biocements will be of benefit for enhancing bone defect repair.

Calcium Orthophosphate-Based Bioceramics

Various types of grafts have been traditionally used to restore damaged bones. In the late 1960s, a strong interest was raised in studying ceramics as potential bone grafts due to their biomechanical properties. A bit later, such synthetic biomaterials were called bioceramics. In principle, bioceramics can be prepared from diverse materials but this review is limited to calcium orthophosphate-based formulations only, which possess the specific advantages due to the chemical similarity to mammalian bones and teeth. During the past 40 years, there have been a number of important achievements in this field. Namely, after the initial development of bioceramics that was just tolerated in the physiological environment, an emphasis was shifted towards the formulations able to form direct chemical bonds with the adjacent bones. Afterwards, by the structural and compositional controls, it became possible to choose whether the calcium orthophosphate-based implants remain biologically stable once incorporated into the skeletal structure or whether they were resorbed over time. At the turn of the millennium, a new concept of regenerative bioceramics was developed and such formulations became an integrated part of the tissue engineering approach. Now calcium orthophosphate scaffolds are designed to induce bone formation and vascularization. These scaffolds are often porous and harbor different biomolecules and/or cells. Therefore, current biomedical applications of calcium orthophosphate bioceramics include bone augmentations, artificial bone grafts, maxillofacial reconstruction, spinal fusion, periodontal disease repairs and bone fillers after tumor surgery. Perspective future applications comprise drug delivery and tissue engineering purposes because calcium orthophosphates appear to be promising carriers of growth factors, bioactive peptides and various types of cells.