Osteogenic and angiogenic potential of molybdenum-containing mesoporous bioactive glass nanoparticles: An ionic approach to bone tissue engineering

Biomaterials intended for application in bone tissue engineering (BTE) ideally stimulate osteogenesis and angiogenesis simultaneously, as both mechanisms are of critical importance for successful bone regeneration. Mesoporous bioactive glass nanoparticles (MBGNs) can be tailored towards specific biological needs, for example by addition of ions like Molybdenum (Mo). While Mo has been shown to enhance osteogenic differentiation of human bone marrow-derived mesenchymal stromal cells (BMSCs) as well as their ability to form and mature a primitive osseous extracellular matrix (ECM), there are contradictory findings regarding its impact on angiogenesis. In this study, the effects of Mo-MBGNs (mol%: 70 SiO2, 25 CaO, 5 MoO3) on viability, proliferation, osteogenic differentiation, ECM formation and angiogenic response of BMSCs were compared to undoped MBGNs (in mol%: 70 SiO2, 30 CaO) and a control group of BMSCs. Furthermore, a human umbilical vein endothelial cells tube formation assay and a chorioallantoic membrane-assay using fertilized chicken eggs were used to analyze angiogenic properties. Mo-MBGNs were cytocompatible and promoted the proliferation of BMSCs. Furthermore, Mo-MBGNs showed promising osteogenic properties as they enhanced osteogenic differentiation, ECM formation and maturation as well as the gene expression and protein production of relevant osteogenic factors in BMSCs. However, despite the promising outcome on osteogenic properties, the addition of Mo to MBGNs resulted in anti-angiogenic effects. Due to the high relevance of vascularization in-vivo, the anti-angiogenic properties of Mo-MBGNs might hamper their osteogenic properties and therefore might restrict their performance in BTE applications. These limitations can be overcome by the addition of ions with distinct pro-angiogenic properties to the Mo-MBGNs-composition. Due to their promising osteogenic properties, Mo-MBGNs constitute a suitable basis for further research in the field of ionic (growth factor free) BTE.

Bioactive glasses incorporating less-common ions to improve biological and physical properties

Bioactive glasses (BGs) have been a focus of research for over five decades for several biomedical applications. Although their use in bone substitution and bone tissue regeneration has gained important attention, recent developments have also seen the expansion of BG applications to the field of soft tissue engineering. Hard and soft tissue repair therapies can benefit from the biological activity of metallic ions released from BGs. These metallic ions are incorporated in the BG network not only for their biological therapeutic effects but also in many cases for influencing the structure and processability of the glass and to impart extra functional properties. The "classical" elements in silicate BG compositions are silicon (Si), phosphorous (P), calcium (Ca), sodium (Na), and potassium (K). In addition, other well-recognized biologically active ions have been incorporated in BGs to provide osteogenic, angiogenic, anti-inflammatory, and antibacterial effects such as zinc (Zn), magnesium (Mg), silver (Ag), strontium (Sr), gallium (Ga), fluorine (F), iron (Fe), cobalt (Co), boron (B), lithium (Li), titanium (Ti), and copper (Cu). More recently, rare earth and other elements considered less common or, some of them, even "exotic" for biomedical applications, have found room as doping elements in BGs to enhance their biological and physical properties. For example, barium (Ba), bismuth (Bi), chlorine (Cl), chromium (Cr), dysprosium (Dy), europium (Eu), gadolinium (Gd), ytterbium (Yb), thulium (Tm), germanium (Ge), gold (Au), holmium (Ho), iodine (I), lanthanum (La), manganese (Mn), molybdenum (Mo), nickel (Ni), niobium (Nb), nitrogen (N), palladium (Pd), rubidium (Rb), samarium (Sm), selenium (Se), tantalum (Ta), tellurium (Te), terbium (Tb), erbium (Er), tin (Sn), tungsten (W), vanadium (V), yttrium (Y) as well as zirconium (Zr) have been included in BGs. These ions have been found to be particularly interesting for enhancing the biological performance of doped BGs in novel compositions for tissue repair (both hard and soft tissue) and for providing, in some cases, extra functionalities to the BG, for example fluorescence, luminescence, radiation shielding, anti-inflammatory, and antibacterial properties. This review summarizes the influence of incorporating such less-common elements in BGs with focus on tissue engineering applications, usually exploiting the bioactivity of the BG in combination with other functional properties imparted by the presence of the added elements.

In-vitro bioactivity of silicate-phosphate glasses using agriculture biomass silica

In the present work, silica extracted from the agricultural waste material; rice husk (RH) was utilized for the synthesis of biocompatible glass of general composition SiO₂-P₂O₅-CaO-MgO-MoO₃. In the synthesized glasses P₂O₅ (5%) and CaO (25%) was kept constant whereas MgO and MoO₃ was varied from 10% to 20% and 0% to 5% respectively. The structural, morphological, elemental and functional properties of silica as well as the derived glasses were analyzed by X-Ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM), Energy Dispersive X-ray spectroscopy (EDX) and Fourier Transform Infrared (FTIR) spectroscopy techniques. The effect of MoO₃ on the structural and thermal properties of silicate phosphate glasses has been studied in details. The bioactivity of as-synthesized glass samples were further evaluated after immersion in Simulated Body Fluid (SBF) solution which shows bioactive properties thus enabling them to be used as scaffolds in implant materials.

Hydrophilic Polysiloxane Microspheres and Ceramic SiOC Microspheres Derived from Them

In this overview article, the research on polysiloxane microspheres performed in the authors’ laboratory is briefly reviewed. These microspheres are prepared in water emulsion from polyhydromethylsiloxane (PHMS). This polymer is cross-linked in the emulsion process by hydrosilylation using various low molecular weight cross-linkers having at least two vinyl functions. The microspheres contain a large number of silanol groups which give them hydrophilicity and a broad possibility of functionalization by condensation with reactive silanes bearing a functional group in the organic radical. Further transformation of these functions leads to materials for practical use, such as catalysts and biocidal powders. The hydrophilic-hydrophobic properties of the microspheres may be fine-tuned by silylation or modification of the precursor PHMS polymer. Pristine microspheres are highly hydrophilic and well-dispersed in water. They do not adsorb proteins and hydrophobic organic substances. Macropores may be generated in these particles by a simple modification of the emulsion procedure. These microspheres are also very good precursors for ceramic silicon oxycarbide microsphers because they retain their shape in pyrolytic processes even at high temperatures; and they give a high yield of ceramic material. The polysiloxane microspheres heated at 600 °C give micro and mezo porous materials with specific surface above 500 m2/g. When pyrolysed at temperatures 1000–1400 °C, they form solid ceramic microspheres of high strength. They retain spherical shape at 1500 °C although cracks are formed at their surfaces. Etching them with HF(aq) solution gives porous microspheres with specific surface above 1000 m2/g that is almost devoid of SiO2.

A Fully Biodegradable Battery for Self-Powered Transient Implants

Biodegradable transient devices represent an emerging type of electronics that could play an essential role in medical therapeutic/diagnostic processes, such as wound healing and tissue regeneration. The associated biodegradable power sources, however, remain as a major challenge toward future clinical applications, as the demonstrated electrical stimulation and sensing functions are limited by wired external power or wireless energy harvesters via near-field coupling. Here, materials' strategies and fabrication schemes that enable a high-performance fully biodegradable magnesium-molybdenum trioxide battery as an alternative approach for an in vivo on-board power supply are reported. The battery can deliver a stable high output voltage as well as prolonged lifetime that could satisfy requirements of representative implantable electronics. The battery is fully biodegradable and demonstrates desirable biocompatibility. The battery system provides a promising solution to advanced energy harvesters for self-powered transient bioresorbable implants as well as eco-friendly electronics.

Bioactive and degradable scaffolds of the mesoporous bioglass and poly(l-lactide) composite for bone tissue regeneration

Bioactive scaffolds of the m-BG–PLLA composite with excellent biocompatibility, degradability and osteogenesis, which could be promising implants for bone regeneration.