Biodegradable polymer scaffolds loaded with low-dose BMP-2 stimulate periodontal ligament cell differentiation

Biodegradable engineered fiber scaffolds fabricated by electrospinning for periodontal tissue regeneration

Considering the specificity of periodontium and the unique advantages of electrospinning, this technology has been used to fabricate biodegradable tissue engineering materials for functional periodontal regeneration. For better biomedical quality, a continuous technological progress of electrospinning has been performed. Based on property of materials (natural, synthetic or composites) and additive novel methods (drug loading, surface modification, structure adjustment or 3 D technique), various novel membranes and scaffolds that could not only relief inflammation but also influence the biological behaviors of cells have been fabricated to achieve more effective periodontal regeneration. This review provides an overview of the usage of electrospinning materials in treatments of periodontitis, in order to get to know the existing research situation and find treatment breakthroughs of the periodontal diseases.

Mesoporous Hydroxyapatite Nanoparticles Mediate the Release and Bioactivity of BMP-2 for Enhanced Bone Regeneration

Efficient delivery of bone morphogenetic protein-2 (BMP-2) with desirable bioactivity is still a great challenge in the field of bone regeneration. In this study, a silk fibroin/chitosan scaffold incorporated with BMP-2-loaded mesoporous hydroxyapatite nanoparticles (mHANPs) was prepared (SCH-L). BMP-2 was preloaded onto mHANPs with a high surface area before mixing with a silk fibroin/chitosan composite. Bare (without BMP-2) silk fibroin/chitosan/mHANP (SCH) scaffolds and SCH scaffolds with directly absorbed BMP-2 (SCH-D) were investigated in parallel for comparison. In vitro release kinetics indicated that BMP-2 released from the SCH-L scaffold showed a significantly lower initial burst release, followed by a more sustained release over time than the SCH-D scaffold. In vitro cell viability, osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs), and the in vivo osteogenic effect of scaffolds in a rat calvarial defect were evaluated. The results showed that compared with bare SCH and SCH-D scaffolds, the SCH-L scaffold significantly promoted the osteogenic differentiation of BMSCs in vitro and induced more pronounced bone formation in vivo. Further studies demonstrated that the mHANP-mediated satisfactory conformational change and sustained release benefited the protection of the released BMP-2 bioactivity, as confirmed by alkaline phosphatase (ALP) activity and a mineralization deposition assay. More importantly, the interaction of BMP-2/mHANPs enhanced the binding ability of BMP-2 to cellular receptors, thereby maintaining its biological activity in osteogenic differentiation and osteoinductivity well, which contributed to the markedly promoted in vitro and in vivo osteogenic efficacy of the SCH-L scaffold. Taken together, these results provide strong evidence that mHANPs represent an attractive carrier for binding BMP-2 to scaffolds. The SCH-L scaffold shows promising potential for bone tissue regeneration applications.

Preparation of BMP-2/chitosan/hydroxyapatite antibacterial bio-composite coatings on titanium surfaces for bone tissue engineering

In this paper, petaling hydroxyapatite (HA)/TiO₂ composite coatings were firstly prepared on titanium (Ti) surface by one-step micro-arc oxidation (MAO), and then pure chitosan (CS) and bone morphogenic protein-2 (BMP-2)-encapsulated CS coatings were respectively loaded on the HA/TiO₂ surfaces by dip-coating method to endow Ti with good antibacterial and biological properties. The bonding strength between coatings was studied by scratch method. The degradability of CS, BMP-2 release behavior, bioactivity, biocompatibility and antibacterial activity of the obtained (BMP-2)/CS/HA/TiO₂ coatings were examined by in vitro tests. The results showed that, the thicker the HA layer, the larger the loaded BMP-2 and CS amount, resulting in better bonding strength between coatings, antibacterial activity and biocompatibility. In addition, with the increase of CS concentration, more CS was loaded on HA coatings, which benefited the increase of CS degrading amount, the prolonged CS degradation time and BMP-2 release time, resulting in improved antibacterial and biological property. All CS/HA/TiO₂ coatings accelerated cell adhesion, spreading and proliferation, and promoted HA formation in simulated body fluids (SBF). After loading BMP-2 in CS, the BMP-2 can significantly improve cell adhesion, spreading and proliferation, and the loaded amount can also be controlled by the concentration of BMP-2 solution. The present study indicates that, by controlling the thickness of HA layers and concentrations of CS and BMP-2 solutions, the Ti implant material with excellent biological and antibacterial properties can be achieved.

Efficacy of copolymer scaffolds delivering human demineralised dentine matrix for bone regeneration

Poly(L-lactide-co-ε-caprolactone) scaffolds were functionalised by 10 or 20 µg/mL of human demineralised dentine matrix. Release kinetics up to 21 days and their osteogenic potential on human bone marrow stromal cells after 7 and 21 days were studied. A total of 390 proteins were identified by mass spectrometry. Bone regeneration proteins showed initial burst of release. Human bone marrow stromal cells were cultured on scaffolds physisorbed with 20 µg/mL and cultured in basal medium (DDM group) or physisorbed and cultured in osteogenic medium or cultured on non-functionalised scaffolds in osteogenic medium. The human bone marrow stromal cells proliferated less in demineralised dentine matrix group and activated ERK/1/2 after both time points. Cells on DDM group showed highest expression of IL-6 and IL-8 at 7 days and expressed higher collagen type 1 alpha 2, SPP1 and bone morphogenetic protein-2 until 21 days. Extracellular protein revealed higher collagen type 1 and bone morphogenetic protein-2 at 21 days in demineralised dentine matrix group. Cells on DDM group showed signs of mineralisation. The functionalised scaffolds were able to stimulate osteogenic differentiation of human bone marrow stromal cells.

The effect of strontium chloride on human periodontal ligament stem cells

The complete repair of periodontal structures remains an exciting challenge that prompts researchers to develop new treatments to restore the periodontium. Recent research has suggested strontium ion to be an attractive candidate to improve osteogenic activity. In this study, we have isolated a clonal finite cell line derived from human periodontal ligament (PDL) in order to assess whether and in which way different doses of SrCl₂ (from 0.5 to 500 μg/ml) can influence both the proliferation and the mineralization process, for future application in oral diseases. PDL cells were cloned by dilution plating technique and characterized by FACS. Cell proliferation analysis and mineralization were performed by [³H]-thymidine incorporation and spectrofluorometric assay. Results have evidenced that the higher SrCl₂ concentrations tested, from 25 to 500 μg/ml, have increased the proliferation activity after only 24 h of treatment. Interestingly, the same higher concentrations have decreased the mineralization, which was conversely increased by the lower ones, from 0.5 to 10 μg/ml. Our findings suggest the possible use of SrCl₂ in appropriate delivery systems that release, at different time points, the specific dose, depending on the biological response that we want to induce on periodontal ligament stem cells, providing a more efficient periodontal regeneration.

Advanced biomaterials and their potential applications in the treatment of periodontal disease

Periodontal disease is considered as a widespread infectious disease and the most common cause of tooth loss in adults. Attempts for developing periodontal disease treatment strategies, including drug delivery and regeneration approaches, provide a useful experimental model for the evaluation of future periodontal therapies. Recently, emerging advanced biomaterials including hydrogels, films, micro/nanofibers and particles, hold great potential to be utilized as cell/drug carriers for local drug delivery and biomimetic scaffolds for future regeneration therapies. In this review, first, we describe the pathogenesis of periodontal disease, including plaque formation, immune response and inflammatory reactions caused by bacteria. Second, periodontal therapy and an overview of current biomaterials in periodontal regenerative medicine have been discussed. Third, the roles of state-of-the-art biomaterials, including hydrogels, films, micro/nanofibers and micro/nanoparticles, developed for periodontal disease treatment and periodontal tissue regeneration, and their fabrication methods, have been presented. Finally, biological properties, including biocompatibility, biodegradability and immunogenicity of the biomaterials, together with their current applications strategies are given. Conclusive remarks and future perspectives for such advanced biomaterials are discussed.