The effect of extracellular matrix proteins on the cellular response of HUVECS and HOBS after covalent immobilization onto titanium

The Application Progress of Nonthermal Plasma Technology in the Modification of Bone Implant Materials

With the accelerating trend of global aging, bone damage caused by orthopedic diseases, such as osteoporosis and fractures, has become a shared international event. Traffic accidents, high-altitude falls, and other incidents are increasing daily, and the demand for bone implant treatment is also growing. Although extensive research has been conducted in the past decade to develop medical implants for bone regeneration and healing of body tissues, due to their low biocompatibility, weak bone integration ability, and high postoperative infection rates, pure titanium alloys, such as Ti-6A1-4V and Ti-6A1-7Nb, although widely used in clinical practice, have poor induction of phosphate deposition and wear resistance, and Ti-Zr alloy exhibits a lack of mechanical stability and processing complexity. In contrast, the Ti-Ni alloy exhibits toxicity and low thermal conductivity. Nonthermal plasma (NTP) has aroused widespread interest in synthesizing and modifying implanted materials. More and more researchers are using plasma to modify target catalysts such as changing the dispersion of active sites, adjusting electronic properties, enhancing metal carrier interactions, and changing their morphology. NTP provides an alternative option for catalysts in the modification processes of oxidation, reduction, etching, coating, and doping, especially for materials that cannot tolerate thermodynamic or thermosensitive reactions. This review will focus on applying NTP technology in bone implant material modification and analyze the overall performance of three common types of bone implant materials, including metals, ceramics, and polymers. The challenges faced by NTP material modification are also discussed.

Fibronectin Conformations after Electrodeposition onto 316L Stainless Steel Substrates Enhanced Early-Stage Osteoblasts' Adhesion but Affected Their Behavior

The implantation of metallic orthopedic prostheses is increasingly common due to an aging population and accidents. There is a real societal need to implement new metal implants that combine durability, good mechanical properties, excellent biocompatibility, as well as affordable costs. Since the functionalization of low-cost 316L stainless steel substrates through the successive electrodeposition of a polypyrrole film (PPy) and a calcium phosphate deposit doped with silicon was previously carried out by our labs, we have also developed a bio-functional coating by electrodepositing or oxidating of fibronectin (Fn) coating. Fn is an extracellular matrix glycoprotein involved in cell adhesion and differentiation. Impacts of either electrodeposition or oxidation on the structure and functionality of Fn were first studied. Thus, electrodeposition is the technique that permits the highest deposition of fibronectin, compared to adsorption or oxidation. Furthermore, electrodeposition seems to strongly modify Fn conformation by the formation of intermingled long fibers, resulting in changes to the accessibility of the molecular probes tested (antibodies directed against Fn whole molecule and Fn cell-binding domain). Then, the effects of either electrodeposited Fn or oxidized Fn were validated by the resulting pre-osteoblast behavior. Electrodeposition reduced pre-osteoblasts' ability to remodel Fn coating on supports because of a partial modification of Fn conformation, which reduced accessibility to the cell-binding domain. Electrodeposited Fn also diminished α5 integrin secretion and clustering along the plasma membrane. However, the N-terminal extremity of Fn was not modified by electrodeposition as demonstrated by Staphylococcus aureus attachment after 3 h of culture on a specific domain localized in this region. Moreover, the number of pre-osteoblasts remains stable after 3 h culture on either adsorbed, oxidized, or electrodeposited Fn deposits. In contrast, mitochondrial activity and cell proliferation were significantly higher on adsorbed Fn compared with electrodeposited Fn after 48 h culture. Hence, electro-deposited Fn seems more favorable to pre-osteoblast early-stage behavior than during a longer culture of 24 h and 48 h. The electrodeposition of matrix proteins could be improved to maintain their bio-activity and to develop this promising, fast technique to bio-functionalize metallic implants.

Bone surface mimicked PDMS membranes stimulate osteoblasts and calcification of bone matrix

Cellular microenvironments play a crucial role in cell behavior. In addition to the biochemical cues present in the microenvironments, biophysical and biomechanical properties on surfaces have an impact on cellular functionality and eventually cellular fate. Effects of surface topography on cell behavior are being studied extensively in the literature. However, these studies often try to replicate topographical features of tissue surfaces by using techniques such as chemical etching, photolithography, and electrospinning, which may result in the loss of crucial micro- and nano- features on the tissue surfaces such as bone. This study investigates the topographical effects of bone surface by transferring its surface features onto polydimethylsiloxane (PDMS) membranes using soft lithography from a bovine femur. Our results have shown that major features on bone surfaces were successfully transferred onto PDMS using soft lithography. Osteoblast proliferation and calcification of bone matrix have significantly increased along with osteoblast-specific differentiation and maturation markers such as osteocalcin (OSC), osterix (OSX), collagen type I alpha 1 chain (COL1A1), and alkaline phosphatase (ALP) on bone surface mimicked (BSM) PDMS membranes in addition to a unidirectional alignment of osteoblast cells compared to plain PDMS surfaces. This presented bone surface mimicking method can provide a versatile native-like platform for further investigation of intracellular pathways regarding osteoblast growth and differentiation.

Biodegradable macromers for implant bulk and surface engineering

Macromers, polymeric molecules with at least two functional groups for cross-polymerization, are interesting materials to tailor mechanical, biochemical and degradative bulk and surface properties of implants for tissue regeneration. In this review we focus on macromers with at least one biodegradable building block. Manifold design options, such as choice of polymeric block(s), optional core molecule and reactive groups, as well as cross-co-polymerization with suitable anchor or linker molecules, allow the adaptation of macromer-based biomaterials towards specific application requirements in both hard and soft tissue regeneration. Implants can be manufactured from macromers using additive manufacturing as well as molding and templating approaches. This review summarizes and discusses the overall concept of biodegradable macromers and recent approaches for macromer processing into implants as well as techniques for surface modification directed towards bone regeneration. These aspects are reviewed including a focus on the authors' contributions to the field through research within the collaborative research project Transregio 67.

Biofunctionalization of Dental Abutment Surfaces by Crosslinked ECM Proteins Strongly Enhances Adhesion and Proliferation of Gingival Fibroblasts

To ensure the long-term success of dental implants, a functional attachment of the soft tissue to the surface of the implant abutment is decisively important in order to prevent the penetration of bacteria into the implant-bone interface, which can trigger peri-implant disease. Here a surface modification approach is described that includes the covalent immobilization of the extracellular matrix (ECM) proteins fibronectin and laminin via a crosslinker to silanized Ti6Al4V and Y-TZP surfaces. The surface properties are evaluated using static contact angle, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). The interaction of human gingival fibroblasts (HGFs) with the immobilized ECM proteins is verified by analyzing the localization of focal contacts, cell area, cell morphology, proliferation rate, and integrin expression. It is observed in the presence of fibronectin and laminin an increased cellular attachment, proliferation, and integrin expression of HGFs accompanied by a significantly higher number of focal adhesions. The presented approach holds great potential to enable a stronger bond between soft tissue and implant abutment surface. This could potentially help to prevent the penetration of bacteria in an in vivo application and thus reduce the risk of periimplant disease.

Optimizing Silanization to Functionalize Stainless Steel Wire: Towards Breast Cancer Stem Cell Isolation

Chemically modified metal surfaces have been used to recognize and capture specific cell types and biomolecules. In this work, stainless steel wires were functionalized with aptamers against breast cancer stem cell markers. Stainless steel wires were first electropolished and silanized via electrodeposition. Aptamers were then attached to the silanized surface through a cross-linker. The functionalized wires were able to capture the target cells in an in vitro test. During surface modification steps, wires were analyzed by atomic force microscopy, cyclic voltammetry, scanning electron and fluorescence microscopy to determine their surface composition and morphology. Optimized conditions of silanization (applied potential, solution pH, heat treatment temperature) for obtaining an aptamer-functionalized wire were determined in this work together with the use of several surface characterization techniques suitable for small-sized and circular wires. These modified wires have potential applications for the in vivo capture of target cells in blood flow, since their small size allows their insertion as standard guidewires in biomedical devices.

Immobilization of BMP-2, BMP-7 and alendronic acid on titanium surfaces: Adhesion, proliferation and differentiation of bone marrow-derived stem cells

This study analyzed the influence of titanium (TiO₂ ) surface modifications with two osteogenic proteins (BMP-2, BMP-7) and an anti-osteoclastic drug (alendronic acid [AA]) on sandblasted/acid-etched (SLA) and plain TiO₂ (PT) on cell adhesion, proliferation and differentiation (alkaline phosphatase [AP] and osteocalcin [OC]) of bone-marrow derived stem cells (BMSCs) after 1, 3 and 7 days in-vitro. Initially, AA surfaces showed the highest cell number and surface coverage. At day 3 and 7, BMP and AA-modified surfaces exhibited a significantly enhanced cell growth. For proliferation, at days 3 and 7, an enhancement on BMP-2, BMP-7 and AA-surfaces was seen. At day 7, SLA also showed a higher proliferation when compared to PT. Initially, AP expression was elevated on SLA and AA surfaces. At days 3 and 7, a significant increased AP expression was seen for SLA, BMP-2, BMP-7 and AA discs. For OC, SLA and AA surfaces had the highest expression after 1 day whereas after 3 and 7 days a significant difference was recorded for SLA, BMP-2, BMP-7 and AA. In conclusion, a beneficial biological effect of a chemical immobilization method of BMP-2, BMP-7 and alendronate onto titanium surfaces on BMSCs was proven.

Effectiveness of Surface Treatment with Amine Plasma for Improving the Biocompatibility of Maxillofacial Plates

To date, no products have been presented for the surface treatment of metal plates used for repairing maxillofacial defects caused by trauma. Plasma surface treatment is a useful technique for chemically modifying the surfaces of biomaterials. Amine plasma-polymerization is an efficient way to prepare bioactive thin film polymers terminated with nitrogen-containing functional groups. The purpose of this study was to investigate the improvement in biocompatibility of titanium (Ti) plates treated with amine plasma-polymerization, and analyze their surfaces characteristics. To compare biocompatibility levels, in vitro test and animal study were performed using an amine plasma-polymerized Ti plate and an untreated Ti plate. After amine plasma-polymerization, the hydrophilicity of the Ti surface was remarkably improved. Biocompatibility was also improved for the Ti plates treated with amine plasma. The clinical application of this technique will not only shorten the time required for osseointegration, but will also improve the regeneration of bone.

Intrasurgical Protein Layer on Titanium Arthroplasty Explants: From the Big Twelve to the Implant Proteome

PURPOSE

Aseptic loosening in total joint replacement due to insufficient osteointegration is an unsolved problem in orthopaedics. The purpose of the study is to obtain a picture of the initial protein adsorption layer on femoral endoprosthetic surfaces as the key to the initiation of osseointegration.

EXPERIMENTAL DESIGN

The paper describes the first study of femoral stem explants from patients for proteome analysis of the primary protein layer. After 2 min in situ, the stems are explanted and frozen in liquid nitrogen. Proteins are eluted under reducing conditions and analyzed by LC-MS/MS.

RESULTS

After exclusion of proteins identified by a single peptide, the implant proteome is found to consist of 2802 unique proteins. Of these, 77% are of intracellular origin, 9% are derived from the plasma proteome, 8% from the bone proteome, and four proteins with highest specificity score could be assigned to the bone marrow proteome (transcriptome). The most abundant protein in the adsorbed total protein layer is hemoglobin (8-11%) followed by serum albumin (3.6-6%).

CONCLUSIONS

A detailed knowledge of the initial protein film deposited onto the implants, as demonstrated here for the first time, may help to understand and predict the response of the osseous microenvironment to implant surfaces.

Antimicrobial and Osseointegration Properties of Nanostructured Titanium Orthopaedic Implants

The surface design of titanium implants influences not only the local biological reactions but also affects at least the clinical result in orthopaedic application. During the last decades, strong efforts have been made to improve osteointegration and prevent bacterial adhesion to these surfaces. Following the rule of “smaller, faster, cheaper”, nanotechnology has encountered clinical application. It is evident that the hierarchical implant surface micro- and nanotopography orchestrate the biological cascades of early peri-implant endosseous healing or implant loosening. This review of the literature gives a brief overview of nanostructured titanium-base biomaterials designed to improve osteointegration and prevent from bacterial infection.

Sustained raloxifene release from hyaluronan-alendronate-functionalized titanium nanotube arrays capable of enhancing osseointegration in osteoporotic rabbits

To enhance the localized bone remodeling at titanium-based implants under osteoporotic conditions, TiO₂ nanotube arrays (TNT) were used as nanoreserviors for raloxifene (Ral) and then covered with the hybrid multilayered coating of chitosan and alendronate grafted hyaluronic acid (HA-Aln) via a spin-assisted layer-by-layer technique. The fabrication of this system (TNT/Ral/LBL-Aln) was characterized by field emission scanning electron microscopy (SEM), atomic force microscope (AFM) and X-ray photoelectron spectroscopy (XPS), respectively. The release test showed that the composited multilayers onto Ral-loaded TiO₂ nanotube substrate (TNT/Ral) could prevent the burst release of Ral from TiO₂ nanotube arrays and maintain stable Ral concentration at the implant site even after 192h. The TNT/Ral/LBL-Aln system demonstrated higher alkaline phosphatase (ALP) activity, mineralization capability in osteoblasts as well as lower tartrate-resistant acid phosphatase (TRAP) activity in osteoclasts compared to both bare TiO₂ nanotube and TNT/Ral substrate, respectively. Moreover, the in vivo tests of micro-CT, histological staining and push-out testing showed that TNT/Ral/LBL-Aln implant could efficiently enhance the formation of new bone around the implant and promote bone binding in osteoporotic rabbits. The study indicated the potential application of TNT/Ral/LBL-Aln system for bone remodeling under osteoporotic condition.

The synergistic effect of type I collagen and hyaluronic acid on the biological properties of Col/HA-multilayer-modified titanium coatings: an in vitro and in vivo study

The synergistic effect on osseointegration is existed between Type I collagen (ColI) and hyaluronic acid (HA), and the early osseogenetic activity of ColI/HA multilayer modified titanium coatings (TC) is higher than that ColI modified TC and HA modified TC.

Effects of different components of the extracellular matrix on endothelialization

The endothelialization of cardiovascular prostheses is known to improve their haemocompatibility. As such body-foreign materials often do not endothelialize spontaneously. A lot of in vitro studies are ongoing how endothelialization of biomaterials can be improved. In this study the influence of different components of a tissue-typical extracellular matrix (ECM) like laminin, fibronectin or gelatin on the formation of an endothelial cell monolayer and on the shear resistance of adherent cells on these substrates was studied.The study revealed that the density of human venous endothelial cells (HUVEC) monolayers differed markedly between cells grown on a natural ECM and cells grown on singularized components of an ECM (p < 0.001). Only HUVEC grown on laminin showed similar densities and a stress fiber pattern comparable to HUVEC grown on the ECM. HUVEC grown on gelatin- or fibronectin-coated coverslips were less firmly attached to the substrate; frequently individual HUVEC and even groups of cells detached.Concluding it seems that coating of implants with laminin supports the formation of shear resistant endothelial cell (EC) monolayer - superior to other ECM components.

Gelatin- and starch-based hydrogels. Part A: Hydrogel development, characterization and coating

The present work aims at constructing the ideal scaffold matrix of which the physico-chemical properties can be altered according to the targeted tissue regeneration application. Ideally, this scaffold should resemble the natural extracellular matrix (ECM) as close as possible both in terms of chemical composition and mechanical properties. Therefore, hydrogel films were developed consisting of methacrylamide-modified gelatin and starch-pentenoate building blocks because the ECM can be considered as a crosslinked hydrogel network consisting of both polysaccharides and structural, signaling and cell-adhesive proteins. For the gelatin hydrogels, three different substitution degrees were evaluated including 31%, 72% and 95%. A substitution degree of 32% was applied for the starch-pentenoate building block. Pure gelatin hydrogels films as well as interpenetrating networks with gelatin and starch were developed. Subsequently, these films were characterized using gel fraction and swelling experiments, high resolution-magic angle spinning (1)H NMR spectroscopy, rheology, infrared mapping and atomic force microscopy. The results indicate that both the mechanical properties and the swelling extent of the developed hydrogel films can be controlled by varying the chemical composition and the degree of substitution of the methacrylamide-modified gelatin applied. The storage moduli of the developed materials ranged between 14 and 63kPa. Phase separation was observed for the IPNs for which separated starch domains could be distinguished located in the surrounding gelatin matrix. Furthermore, we evaluated the affinity of aggrecan for gelatin by atomic force microscopy and radiolabeling experiments. We found that aggrecan can be applied as a bioactive coating for gelatin hydrogels by a straightforward physisorption procedure. Thus, we achieved distinct fine-tuning of the physico-chemical properties of these hydrogels which render them promising candidates for tissue engineering approaches.

Asymmetric cell division in plants: mechanisms of symmetry breaking and cell fate determination

Asymmetric cell division is a fundamental mechanism that generates cell diversity while maintaining self-renewing stem cell populations in multicellular organisms. Both intrinsic and extrinsic mechanisms underpin symmetry breaking and differential daughter cell fate determination in animals and plants. The emerging picture suggests that plants deal with the problem of symmetry breaking using unique cell polarity proteins, mobile transcription factors, and cell wall components to influence asymmetric divisions and cell fate. There is a clear role for altered auxin distribution and signaling in distinguishing two daughter cells and an emerging role for epigenetic modifications through chromatin remodelers and DNA methylation in plant cell differentiation. The importance of asymmetric cell division in determining final plant form provides the impetus for its study in the areas of both basic and applied science.

A biphasic calcium phosphate coating for potential drug delivery affects early osseointegration of titanium implants

BACKGROUND

Calcium phosphate (CaP) surface coatings may accelerate osseointegration and serve as a drug delivery system for mineral-binding biomolecules. In a pilot study, the impact of a commercially available, thin CaP coating on early osseous bone remodeling was compared with a modern, subtractive-treated rough surface (SLA-like) in an animal trial.

METHODS

In 16 rabbits, 32 endosseous implants (CaP; n = 16, SLA-like; n = 16) were bilaterally inserted in the proximal tibia after randomization. After 2 and 4 weeks, bone-implant contact (BIC;%) in the cortical (cBIC) and the trabecular bone (sBIC) as well as volume of bone within the screw thread with the highest amount of new-formed bone (area;%) were analyzed.

RESULTS

After 2 weeks, cBIC was significantly higher for CaP when compared with SLA-like (58 ± 7% versus 40.4 ± 18%; P = 0.021). sBIC for CaP was 14.7 ± 8% and for SLA-like 7.2 ± 7.8% (P = 0.081). For area, the mean volumes were 82.8 ± 10.8% for CaP and 73.6 ± 22% for SLA-like (P = 0.311). After 4 weeks, cBIC was 42.9 ± 13% for the CaP and 46.5 ± 29.1% for the SLA-like group (P = 0.775). An sBIC of 6.9 ± 9.3% was calculated for CaP and of 12.3 ± 4.8% for SLA-like (P = 0.202). The values for area were 62.3 ± 24.1% for CaP and 50.1 ± 25.9% for SLA-like (P = 0.379).

CONCLUSIONS

The CaP coating has putative additional advantages in the early osseoconduction phases. It seems suitable for a feasible and clinical applicable bioactivation.

Comparison of growth & function of endothelial progenitor cells cultured on deproteinized bovine bone modified with covalently bound fibronectin and bound vascular endothelial growth factor

OBJECTIVES

The objective of this study was to assess and compare the growth and function of Endothelial Progenitor Cells (EPCs) cultured on covalently bonded Vascular Endothelial Growth Factor (VEGF) and covalently bonded Fibronectin (FN) coating on deproteinized bovine bone (DBB) (test samples), compared to non-modified DBB blocks (control sample).

MATERIALS AND METHODS

The test samples were prepared by plasma polymerization of allylamine onto DBB blocks. Group1 of test samples were prepared with VEGF coating (VEGF-DBB) where as the Group2 test samples were coated with FN (FN-DBB). Non-modified DBB blocks served as a Control. EPCs were isolated and cultivated from buffy coats of peripheral blood of healthy volunteers and cultivated in the different samples and examined at time intervals of 24 h, 3 days, and 7 days. Evaluation of growth by cell count and cell morphology was done using Confocal Laser Scanning Electron Microscopy; vitality and function of cells was assessed using MTT assay and RT-PCR and ELISA for eNOS and iNOS respectively.

RESULTS

The results of the study show that both VEGF and FN could be successfully immobilized by plasma polymerization onto a complex, porous, three-dimensional structure of DBB. When comparing vital cell coverage, proliferation and function of EPCs, FN-DBB provided more positive values followed by VEGF-DBB as compared to DBB samples. eNOS level were significant higher in VEGF-DBB and FN-DBB when compared to DBB (P = 0.019 and P = 0.002). The difference between VEGF-DBB and FN-DBB was not significant.

CONCLUSIONS

Biomimetic coatings of Fibronectin may clinically relate to faster angiogenesis and earlier healing potential.

Plasma functionalization of polycarbonaturethane to improve endothelialization—Effect of shear stress as a critical factor for biocompatibility control

Medical devices made of polycarbonaturethane (PCU) combine excellent mechanical properties and little biological degradation, but restricted hemocompatibility. Modifications of PCU might reduce platelet adhesion and promote stable endothelialization. PCU was modified using gas plasma treatment, binding of hydrogels, and coupling of cell-active molecules (modified heparin, anti-thrombin III (ATIII), argatroban, fibronectin, laminin-nonapeptide, peptides with integrin-binding arginine-glycine-aspartic acid (RGD) motif). Biocompatibility was verified with static and dynamic cell culture techniques. Blinded analysis focused on improvement in endothelial cell (EC) adhesion/proliferation, anti-thrombogenicity, reproducible manufacturing process, and shear stress tolerance of ECs. EC adhesion and antithrombogenicity were achieved with 9/35 modifications. Additionally, 6/9 stimulated EC proliferation and 3/6 modification processes were highly reproducible for endothelialization. The latter modifications comprised immobilization of ATIII (A), polyethyleneglycole-diamine-hydrogel (E) and polyethylenimine-hydrogel connected with modified heparin (IH). Under sheer stress, only the IH modification improved EC adhesion within the graft. However, ECs did not arrange in flow direction and cell anchorage was restricted. Despite large variation in surface modification chemistry and improved EC adhesion under static culture conditions, additional introduction of shear stress foiled promising preliminary data. Therefore, biocompatibility testing required not only static tests but also usage of physiological conditions such as shear stress in the case of vascular grafts.