The effect of alendronate on biomineralization at the bone/implant interface

Assessing bone formation on hydrophilic and hydrophobic implant surfaces in a murine model treated with bisphosphonates

OBJECTIVE

To evaluate the osseointegration of implants with hydrophobic (HFB) and hydrophilic (HFL) surfaces in a murine model of high-dose bisphosphonates (BPs).

MATERIALS AND METHODS

Sixty-four rats were randomly allocated into four groups: control group with HFB implants (CG-HFB), control group with HFL implants (CG-HFL), BP group with HFB implants (BP-HFB), and BP group with HFL implants (BP-HFL). Animals were euthanized after 15 and 45 days (n=8). The dependent variables assessed were the removal torque (biomechanical analysis), the bone volume around the implants (%BV/TV) (microtomographic analysis), the bone-implant contact (%BIC), the bone between the threads (%BBT) (histomorphometric analysis), and the expression of bone metabolism markers (immunohistochemistry analysis).

RESULTS

The CG-HFL and BP-HFL groups presented higher removal torque than the CG-HFB and BP-HFB implants. The %BIC of the CG-HFL surfaces was slightly higher than that of the CG-HFB implants. The BP-HFB and BP-HFL groups presented a higher %BIC than that of the CG-HFB and CG-HFL groups (p<0.001). BP therapy also increased the %BBT at both implant surfaces. Higher levels of ALP were observed in the matrix region of bone tissue on the HFL surfaces than on the HFB surfaces.

CONCLUSION

Both surfaces enable osseointegration in rats under BP therapy.

CLINICAL RELEVANCE

The study demonstrates that hydrophobic (HFB) and hydrophilic (HFL) implant surfaces can promote osseointegration in rats undergoing bisphosphonate therapy. The HFL surfaces exhibited improved biomechanical performance, higher bone-implant contact, and increased bone volume, suggesting their potential clinical relevance for implant success in individuals on bisphosphonate treatment.

Bisphosphonate-incorporated coatings for orthopedic implants functionalization

Bisphosphonates (BPs), the stable analogs of pyrophosphate, are well-known inhibitors of osteoclastogenesis to prevent osteoporotic bone loss and improve implant osseointegration in patients suffering from osteoporosis. Compared to systemic administration, BPs-incorporated coatings enable the direct delivery of BPs to the local area, which will precisely enhance osseointegration and bone repair without the systemic side effects. However, an elaborate and comprehensive review of BP coatings of implants is lacking. Herein, the cellular level (e.g., osteoclasts, osteocytes, osteoblasts, osteoclast precursors, and bone mesenchymal stem cells) and molecular biological regulatory mechanism of BPs in regulating bone homeostasis are overviewed systematically. Moreover, the currently available methods (e.g., chemical reaction, porous carriers, and organic material films) of BP coatings construction are outlined and summarized in detail. As one of the key directions, the latest advances of BP-coated implants to enhance bone repair and osseointegration in basic experiments and clinical trials are presented and critically evaluated. Finally, the challenges and prospects of BP coatings are also purposed, and it will open a new chapter in clinical translation for BP-coated implants.

Construction of Local Drug Delivery System on Titanium-Based Implants to Improve Osseointegration

Titanium and its alloys are the most widely applied orthopedic and dental implant materials due to their high biocompatibility, superior corrosion resistance, and outstanding mechanical properties. However, the lack of superior osseointegration remains the main obstacle to successful implantation. Previous traditional surface modification methods of titanium-based implants cannot fully meet the clinical needs of osseointegration. The construction of local drug delivery systems (e.g., antimicrobial drug delivery systems, anti-bone resorption drug delivery systems, etc.) on titanium-based implants has been proved to be an effective strategy to improve osseointegration. Meanwhile, these drug delivery systems can also be combined with traditional surface modification methods, such as anodic oxidation, acid etching, surface coating technology, etc., to achieve desirable and enhanced osseointegration. In this paper, we review the research progress of different local drug delivery systems using titanium-based implants and provide a theoretical basis for further research on drug delivery systems to promote bone–implant integration in the future.

Effect of bisphosphonate treatment of titanium surfaces on alkaline phosphatase activity in osteoblasts: a systematic review and meta-analysis

BACKGROUND

Bisphosphonate coating of dental implants is a promising tool for surface modification aiming to improve the osseointegration process and clinical outcome. The biological effects of bisphosphonates are thought to be mainly associated with osteoclasts inhibition, whereas their effects on osteoblast function are unclear. A potential of bisphosphonate coated surfaces to stimulate osteoblast differentiation was investigated by several in vitro studies with contradictory results. The purpose of this systematic review and meta-analysis was to evaluate the effect of bisphosphonate coated implant surfaces on alkaline phosphatase activity in osteoblasts.

METHODS

In vitro studies that assessed alkaline phosphatase activity in osteoblasts following cell culture on bisphosphonate coated titanium surfaces were searched in electronic databases PubMed/MEDLINE, Scopus and ISI Web of Science. Animal studies and clinical trials were excluded. The literature search was restricted to articles written in English and published up to August 2019. Publication bias was assessed by the construction of funnel plots.

RESULTS

Eleven studies met the inclusion criteria. Meta-analysis showed that coating of titanium surfaces with bisphosphonates increases alkaline phosphatase activity in osteoblasts after 3 days (n = 1), 7 (n = 7), 14 (n = 6) and 21 (n = 3) days. (7 days beta coefficient = 1.363, p-value = 0.001; 14 days beta coefficient = 1.325, p-value < 0.001; 21 days beta coefficient = 1.152, p-value = 0.159).

CONCLUSIONS

The meta-analysis suggests that bisphosphonate coatings of titanium implant surfaces may have beneficial effects on osteogenic behaviour of osteoblasts grown on titanium surfaces in vitro. Further studies are required to assess to which extent bisphosphonates coating might improve osseointegration in clinical situations.

[Overview of animal researches about the effects of systemic drugs on implant osseointegration]

Implant osseointegration is an important biological basis for dental implantology. Many factors, including surgical factors, implant factors, and patients' own factors, affect implant osseointegration. Notably, the application of systemic drugs to improve implant osseointegration has become a research hotspot. This article reviews the effects of systemic drugs on implant osseointegration based on animal researches to provide systemic drug selection to improve implant osseointegration and lay a good foundation for later clinical trials.

Enhanced Bone Remodeling Effects of Low-Modulus Ti-5Zr-3Sn-5Mo-25Nb Alloy Implanted in the Mandible of Beagle Dogs under Delayed Loading

Titanium (Ti) and its alloys are widely used in the dental and prosthetic implant fields due to their favorable biocompatibility. In this study, porous surface coatings incorporated with nanoscale hydroxyapatite particles on the surface of Ti and Ti-5Zr-3Sn-5Mo-25Nb (TLM) alloy were fabricated by microarc oxidation followed by hydrothermal treatment; the surface roughness and hydrophilicity were obviously enhanced by the surface modification procedure. In vivo, four adult male beagle dogs were selected for an implantation procedure and restored with full metal crowns after healing for 3 months. The bone responses were evaluated via histomorphological observation. Raman spectral analysis and nanoindentation experiments were used to quantitatively and qualitatively estimate the characteristics of the bone formed around the implants. Compared to the Ti group, the TLM titanium alloy group showed a significant increase in the percentage of bone-implant interface contact, bone inside the thread, mineralization, crystallinity, modulus of elasticity, and hardness of the integrated bone after delayed loading in the TLM group. Therefore, the TLM titanium alloy is considered a candidate implant material with desirable biomechanical compatibility, especially under applied stress.

Immobilization of BMP-2, BMP-7 and alendronic acid on titanium surfaces: Adhesion, proliferation and differentiation of bone marrow-derived stem cells

This study analyzed the influence of titanium (TiO₂ ) surface modifications with two osteogenic proteins (BMP-2, BMP-7) and an anti-osteoclastic drug (alendronic acid [AA]) on sandblasted/acid-etched (SLA) and plain TiO₂ (PT) on cell adhesion, proliferation and differentiation (alkaline phosphatase [AP] and osteocalcin [OC]) of bone-marrow derived stem cells (BMSCs) after 1, 3 and 7 days in-vitro. Initially, AA surfaces showed the highest cell number and surface coverage. At day 3 and 7, BMP and AA-modified surfaces exhibited a significantly enhanced cell growth. For proliferation, at days 3 and 7, an enhancement on BMP-2, BMP-7 and AA-surfaces was seen. At day 7, SLA also showed a higher proliferation when compared to PT. Initially, AP expression was elevated on SLA and AA surfaces. At days 3 and 7, a significant increased AP expression was seen for SLA, BMP-2, BMP-7 and AA discs. For OC, SLA and AA surfaces had the highest expression after 1 day whereas after 3 and 7 days a significant difference was recorded for SLA, BMP-2, BMP-7 and AA. In conclusion, a beneficial biological effect of a chemical immobilization method of BMP-2, BMP-7 and alendronate onto titanium surfaces on BMSCs was proven.

Spatiotemporally Controlled Release of Rho-Inhibiting C3 Toxin from a Protein-DNA Hybrid Hydrogel for Targeted Inhibition of Osteoclast Formation and Activity

In osteoporosis, bone structure can be improved by the introduction of therapeutic molecules inhibiting bone resorption by osteoclasts. Here, biocompatible hydrogels represent an excellent option for the delivery of pharmacologically active molecules to the bone tissue because of their biodegradability, injectability, and manifold functionalization capacity. The present study reports the preparation of a multifunctional hybrid hydrogel from chemically modified human serum albumin and rationally designed DNA building blocks. The hybrid hydrogel combines advantageous characteristics, including rapid gelation through DNA hybridization under physiological conditions and a self-healing and injectable nature with the possibility of specific loading and spatiotemporally controlled release of active proteins, making it an advanced biomaterial for the local treatment of bone diseases, for example, osteoporosis. The hydrogels are loaded with a recombinant Rho-inhibiting C3 toxin, C2IN-C3lim-G205C. This toxin selectively targets osteoclasts and inhibits Rho-signaling and, thereby, actin-dependent processes in these cells. Application of C2IN-C3lim-G205C toxin-loaded hydrogels effectively reduces osteoclast formation and resorption activity in vitro, as demonstrated by tartrate-resistant acid phosphatase staining and the pit resorption assay. Simultaneously, osteoblast activity, viability, and proliferation are unaffected, thus making C2IN-C3lim-G205C toxin-loaded hybrid hydrogels an attractive pharmacological system for spatial and selective modulation of osteoclast functions to reduce bone resorption.

Direct communication between osteocytes and acid-etched titanium implants with a sub-micron topography

The osteocyte network, through the numerous dendritic processes of osteocytes, is responsible for sensing mechanical loading and orchestrates adaptive bone remodelling by communicating with both the osteoclasts and the osteoblasts. The osteocyte network in the vicinity of implant surfaces provides insight into the bone healing process around metallic implants. Here, we investigate whether osteocytes are able to make an intimate contact with topologically modified, but micrometre smooth (S a < 0.5 µm) implant surfaces, and if sub-micron topography alters the composition of the interfacial tissue. Screw shaped, commercially pure (cp-Ti) titanium implants with (i) machined (S a = ~0.2 µm), and (ii) two-step acid-etched (HF/HNO3 and H2SO4/HCl; S a = ~0.5 µm) surfaces were inserted in Sprague Dawley rat tibia and followed for 28 days. Both surfaces showed similar bone area, while the bone-implant contact was 73 % higher for the acid-etched surface. By resin cast etching, osteocytes were observed to maintain a direct intimate contact with the acid-etched surface. Although well mineralised, the interfacial tissue showed lower Ca/P and apatite-to-collagen ratios at the acid-etched surface, while mineral crystallinity and the carbonate-to-phosphate ratios were comparable for both implant surfaces. The interfacial tissue composition may therefore vary with changes in implant surface topography, independently of the amount of bone formed. Implant surfaces that influence bone to have higher amounts of organic matrix without affecting the crystallinity or the carbonate content of the mineral phase presumably result in a more resilient interfacial tissue, better able to resist crack development during functional loading than densely mineralised bone.

Biomaterials-Potential nucleation agents in blood and possible implications

Blood, simulated body fluids, and many cell culture media are supersaturated solutions with respect to several calcium phosphates. Therefore biomaterials can act as nucleation agents and evoke heterogeneous nucleation of salts on the surface of immersed biomaterials. Depending on the field of application, this can be either beneficial or disadvantageous. Although nucleation from supersaturated solutions is an old and well-known scientific phenomenon it is not standard to test new developed materials with surface analytical methods for their ability to initiate nucleation in vitro. Therefore, this communication aims to review the mineralization effect and to emphasize the possible negative implications, especially to functionalized bone implants. Surface coatings with proteins, growth factors, and, etc., can become ineffective due to deposition of a dense calcium phosphate layer. In the case of drug loaded implants, drug release might be inhibited.