Fabrication of interconnected porous calcite by bridging calcite granules with dicalcium phosphate dihydrate and their histological evaluation

Fabrication of interconnected porous Ag substituted octacalcium phosphate blocks based on a dissolution-precipitation reaction

Here, we introduce Ag substituted octacalcium phosphate (OCP-Ag) blocks with interconnected porous structure and sufficient mechanical strength as bone substitute (i.e., foam). We employed a two-step process for fabrication, which includes a setting reaction for acidic calcium phosphate granules using an acidic phosphate solution and a phase conversion process via dissolution-precipitation method in cocktail ((NH4)2HPO4-NH4NO3-NaNO3-AgNO3) solutions. The Ag contents in the fabricated OCP-Ag foams were 0.08-0.15 at%, which were sufficient in exhibiting contact antibacterial ability. The mechanical strength and porosity of the OCP-Ag foams were about 0.5 MPa and 70%, respectively. These values were sufficient for the application of the OCP-Ag foams as bone substitute. Graphical abstract.

In vivo bioresorbability and bone formation ability of sintered highly pure calcium carbonate granules

Calcium carbonate-based bone substitutes derived from natural coral exoskeleton (aragonite) are resorbed and remodeled faster than calcium phosphate-based substitutes. However, coral species with structures appropriate for use as bone substitutes are very limited. Therefore, it is important to evaluate potential of artificial calcium carbonate ceramics as a bone substitute. In this study, calcium carbonate granules with various porosities and pore sizes were prepared by sintering a highly pure (>99.98%) calcium carbonate powder (calcite), and their resorption properties and bone formation abilities were examined in vivo for the first time. The sintered calcium carbonate was resorbed faster than β-tricalcium phosphate, which has a similar structure. However, sintered calcium carbonate did not promote new bone formation during long-term implantation. Furthermore, both resorption and new bone formation were affected by the pore structure. The optimal structures of the artificially sintered calcium carbonate bone substitute were also discussed.

Angiogenesis involvement by octacalcium phosphate-gelatin composite-driven bone regeneration in rat calvaria critical-sized defect

Effect of octacalcium phosphate/gelatin composite (OCP/Gel) on angiogenesis was studied by its implantation in rat calvaria critical-sized defect in relation to bone regeneration for 2 and 4 weeks. The implantation of OCP/Gel disks was analyzed by radiomorphometry using a radiopaque material perfusion (Microfil®) method and histomorphometry by hematoxylin and eosin-staining before and after the decalcification. Effect of the OCP dose in the range up to 4 mg per well on the capillary-like tube formation by human umbilical vein endothelial cells (HUVECs) was also examined in a transwell cell culture. The results showed that the blood vessels formation by OCP/Gel group was significantly higher at 2 weeks than other groups but decreased at 4 weeks during the advancement of new bone formation. The capillary-like tube formation was highest in an OCP dose of 1 mg per well while other OCP doses above or below 1 mg did not show such a stimulatory effect. The results established both in vivo and in vitro confirmed that OCP has a positive effect on angiogenesis during bone regeneration in a suitable dose ranges, suggesting that the angiogenesis stimulated by OCP could be involved in the OCP/Gel-enhanced bone regeneration. STATEMENT OF SIGNIFICANCE: We have reported that octacalcium phosphate (OCP) materials display stimulatory capacities on the bone tissue-related cells. However, the effect of OCP on the angiogenesis and its relation to the OCP-enhanced bone regeneration is unknown. This study confirmed the capacity of OCP on angiogenesis before increasing the new bone mass after the implantation of a composite of OCP and gelatin (OCP/Gel). The blood vessels formation took place associated with the area beginning of the new bone formation, which finally decreased together with development of bone formation. Because OCP was ascertained stimulating the capillary-like tube formation in HUVEC culture with a certain OCP dose, the present study is the first report showing the capacity of OCP on angiogenesis during the OCP/Gel-enhanced bone regeneration.

Fabrication and evaluation of carbonate apatite-coated calcium carbonate bone substitutes for bone tissue engineering

Carbonate apatite-coated calcium carbonate (CO₃ Ap/CaCO₃ ) was fabricated through a dissolution-precipitation reaction using CaCO₃ granules as a precursor to accelerate bone replacement based on superior osteoconductivity of the CO₃ Ap shell, along with Ca²⁺ release from the CaCO₃ core and quicker resorption of the CaCO₃ core. In the present study, CaCO₃ , 10% CO₃ Ap/CaCO₃ , 30% CO₃ Ap/CaCO₃ , and CO₃ Ap granules were fabricated and examined histologically to evaluate their potential as bone substitutes. Larger contents of CaCO₃ in the granules resulted in higher Ca²⁺ release and promoted cell proliferation of murine preosteoblasts at 6 days compared with CO₃ Ap. Interestingly, in a rabbit femur defect model, 10% CO₃ Ap/CaCO₃ induced significantly higher new bone formation and higher material resorption compared with CO₃ Ap at 8 weeks. Nevertheless, CO₃ Ap showed a superior osteoconductive potential compared with 10% CO₃ Ap/CaCO₃ at 8 weeks. All tested granules were most likely resorbed by cell mediation including multinucleated giant cell functions. Therefore, we conclude that CO₃ Ap/CaCO₃ has a positive potential for bone tissue engineering based on well-controlled calcium release, bone formation, and material resorption.

Poly(acrylic acid)-regulated Synthesis of Rod-Like Calcium Carbonate Nanoparticles for Inducing the Osteogenic Differentiation of MC3T3-E1 Cells

Calcium carbonate, especially with nanostructure, has been considered as a good candidate material for bone regeneration due to its excellent biodegradability and osteoconductivity. In this study, rod-like calcium carbonate nanoparticles (Rod-CC NPs) with desired water dispersibility were achieved with the regulation of poly (acrylic acid). Characterization results revealed that the Rod-CC NPs had an average length of 240 nm, a width of 90 nm with an average aspect ratio of 2.60 and a negative ζ-potential of −22.25 ± 0.35 mV. The degradation study illustrated the nanoparticles degraded 23% at pH 7.4 and 45% at pH 5.6 in phosphate-buffered saline (PBS) solution within three months. When cultured with MC3T3-E1 cells, the Rod-CC NPs exhibited a positive effect on the proliferation of osteoblast cells. Alkaline phosphatase (ALP) activity assays together with the osteocalcin (OCN) and bone sialoprotein (BSP) expression observations demonstrated the nanoparticles could induce the differentiation of MC3T3-E1 cells. Our study developed well-dispersed rod-like calcium carbonate nanoparticles which have great potential to be used in bone regeneration.