Characterization and antipathogenic evaluation of a novel quaternary phosphonium tripolyacrylamide and elucidation of the inactivation mechanisms

Povidone-iodine enhanced underwater tape

Realizing rapid and stable bonding under humid conditions has remained a challenge in adhesion science and wound dressing. In this study, polyacrylate-based underwater tape with water-enhanced adhesion and antimicrobial performance was designed and synthesized. Good underwater adhesion performance is achieved through the reasonable selection of comonomers, among which 4-hydroxybutyl acrylate (4-HBA) and isobornyl acrylate (IBOA) provide rich hydrogen bond interactions and a rigid side chain stable structure, respectively. The former effectively increases the interface strength between the tape and the substrate, while the latter ensures that the tape can maintain a good cohesion strength under water. Besides, povidone iodine (PVP-I₂) as a reinforcing filler and germicidal factor endows the tape with tunable mechanical properties and impressive antimicrobial abilities. This work provides a facile approach to prepare a wet adhesive for medical and industrial fields which can be used as wound dressing and underwater adhesive materials.

Quaternary Phosphonium Compounds: An Examination of Non-Nitrogenous Cationic Amphiphiles That Evade Disinfectant Resistance

Quaternary ammonium compounds (QACs) serve as mainstays in the formulation of disinfectants and antiseptics. However, an over-reliance and misuse of our limited QAC arsenal has driven the development and spread of resistance to these compounds, as well as co-resistance to common antibiotics. Extensive use of these compounds throughout the COVID-19 pandemic thus raises concern for the accelerated proliferation of antimicrobial resistance and demands for next-generation antimicrobials with divergent architectures that may evade resistance. To this end, we endeavored to expand beyond canonical ammonium scaffolds and examine quaternary phosphonium compounds (QPCs). Accordingly, a synthetic and biological investigation into a library of novel QPCs unveiled biscationic QPCs to be effective antimicrobial scaffolds with improved broad-spectrum activities compared to commercial QACs. Notably, a subset of these compounds was found to be less effective against a known QAC-resistant strain of MRSA. Bioinformatic analysis revealed the unique presence of a family of small multiresistant transporter proteins, hypothesized to enable efflux-mediated resistance to QACs and QPCs. Further investigation of this resistance mechanism through efflux-pump inhibition and membrane depolarization assays illustrated the superior ability of P6P-10,10 to perturb the cell membrane and exert the observed broad-spectrum potency compared to its commercial counterparts. Collectively, this work highlights the promise of biscationic phosphonium compounds as next-generation disinfectant molecules with potent bioactivities, thereby laying the foundation for future studies into the synthesis and biological investigation of this nascent antimicrobial class.

Phosphonium-based ionic liquids as antifungal agents for conservation of heritage sandstone

With a view to preventing fungal deterioration of historical stone artworks, we report the use of phosphonium-based ionic liquids (ILs) as potent antifungal agents against dematiaceous fungi commonly found on heritage stones. Three ILs: tributyldodecylphosphonium polyoxometalate [P44412][POM], tributyltetradecylphosphonium polyoxometalate [P44414][POM], and trihexyltetradecylphosphonium polyoxometalate [P66614][POM] were prepared and their thermal stabilities and in vitro antifungal activities were evaluated. From the ramped temperature thermogravimetric analysis and antifungal experiments it can be clearly observed that the alkyl chain length of the tetraalkylphosponium cation has a significant influence on the thermal and antifungal properties. The thermal stability and antifungal activity decreased as the number of carbon atoms of the alkyl substituents increased and, thus, followed the order [P44412][POM] > [P44414][POM] > [P66614][POM]. In addition, inoculation of four fungal species on IL-coated sandstone surfaces showed significant inhibition of fungal growth, endowing the materials with potential applications in heritage sandstone conservation.

Immobilization of Cu (II) via a graphene oxide-supported strategy for antibacterial reutilization with long-term efficacy

The past several decades have witnessed tremendous research to discover ways for controlling heavy metal pollution, but most of the strategies do not involve reuse of the captured heavy metals. Herein, we propose a graphene oxide -based strategy for the effective removal of Cu²⁺ ions from water, coupled with their reuse as an antibacterial agent. Using GO nanosheets as an adsorbent and nanosupport, the Cu²⁺ ions were effectively extracted from water (>99.9%) and reduced in situ to copper nanoparticles (Cu NPs) containing both crystalline Cu and Cu₂O. The as-captured Cu NPs showed efficient in vitro antibacterial ability against Escherichia coli, reducing the bacteria from 10⁹ to 10¹ CFU mL^-1 by using ¹ mg mL^-1 Cu NPs/GO NSs for 1 h. The minimum inhibitory concentration determined to be only 16 μg mL^-1. For practical applications, Cu recovered from wastewater could reduce bacteria by 8 log CFU in 1 h. The recovered Cu was still able to reduce the bacteria by 7 log CFU after 2 months of storage in an argon atmosphere. This strategy of extracting heavy metals and subsequently reutilizing to kill bacteria will be of great significance for environmental remediation and public healthcare.

Derivatisation of metronidazole enhances cytotoxic effect against Acanthamoeba genotype T4 isolates and leads to cytomorphological changes in trophozoites

Amoebae of the genus Acanthamoeba are worldwide distributed causative agents of serious human infections such as granulomatous amoebic encephalitis (GAE) and Acanthamoeba keratitis (AK). To date, treatment of these infections is non-uniform and frequently unsuccessful. Recently, the phosphonium salts were studied for their high levels of antimicrobial activity. This work was aimed to investigate the cytotoxic effect of metronidazole and two phosphonium salts (PS1, PS2) on two clinical Acanthamoeba isolates. The isolates showed distinctly higher susceptibility to both phosphonium salts than to metronidazole. The highest susceptibility was noted to PS1 after 48 h of incubation. Metronidazole derivate PS2 showed higher susceptibility than metronidazole. The values of EC₅₀ of PS2 were approximately twenty times lower than EC₅₀ of metronidazole for Acanthamoeba lugdunensis strain and sixteen times lower for Acanthamoeba quina strain after 48 h. Although the therapeutic effect of metronidazole in Acanthamoeba infections is usually insufficient, its derivatisation can result in a significantly higher amoebicidal effect. Cytomorphological changes of trophozoites after exposure to tested compounds included rounding up of the cells, damage of membrane integrity, presence of pathological protrusions, elongation of the cells or pseudocyst-like stages. Obtained results indicate possible therapeutic potential of studied phosphonium salts.

Advancements in the Development of Non-Nitrogen-Based Amphiphilic Antiseptics to Overcome Pathogenic Bacterial Resistance

The prevalence of quaternary ammonium compounds (QACs) as common disinfecting agents for the past century has led bacteria to develop resistance to such compounds. Given the alarming increase in resistant strains, new strategies are required to combat this rise in resistance. Recent efforts to probe and combat bacterial resistance have focused on studies of multiQACs. Relatively unexplored, however, have been changes to the primary atom bearing positive charge in these antiseptics. Here we review the current state of the field of both phosphonium and sulfonium amphiphilic antiseptics, both of which hold promise as novel means to address bacterial resistance.

PEGylated Bis-Quaternary Triphenyl-Phosphonium Tosylate Allows for Balanced Antibacterial Activity and Cytotoxicity

Quaternary triphenylphosphonium compounds (TPP⁺) have been widely recognized as an important antimicrobial because of their fast antimicrobial speed and broad antimicrobial spectrum. However, small-molecule TPP⁺ compounds have the defects of toxicity, which is the key factor that limits their practical applications. Here, two mono- and one bis-quaternary phosphonium tosylate compounds with different lengths of oligo(ethylene glycol) (OEG) chains and TPP⁺ as the active moiety were synthesized. Bis-TPP⁺ have a short OEG chain coupling two TPP⁺ at both ends, while mono-TPP⁺ attaches the OEG chain at one end in one molecule. In vitro antibacterial activities were evaluated against both Gram-positive as well as Gram-negative bacteria in terms of the inhibition zone (ZOI) and minimum inhibitory concentration (MIC). To investigate the antibacterial mechanism, β-galactosidase activity was monitored for measuring the degree of membrane permeability correlated to the abilities to disrupt the membranes of bacteria. Moreover, their structure-antibacterial activity and structure-cytotoxicity relationships were further analyzed. The results indicated that bis-TPP⁺ synthesized can reach the sterilization rate 90% or more against Escherichia coli and Staphylococcus aureus at MICs of 3.1 and 1.5 mg/mL, respectively, and meanwhile, the cell proliferation can reach more than 80%. This paper represents an excellent approach for development of bis-TPP⁺ bactericidal molecules that would achieve an optimal balance between antimicrobial activity and cytotoxicity.

Positively Charged Polymers as Promising Devices against Multidrug Resistant Gram-Negative Bacteria: A Review

Antibiotic resistance has increased markedly in Gram-negative bacteria, causing severe infections intractable with traditional drugs and amplifying mortality and healthcare costs. Consequently, to find novel antimicrobial compounds, active on multidrug resistant bacteria, is mandatory. In this regard, cationic antimicrobial peptides (CAMPs)—able to kill pathogens on contact—could represent an appealing solution. However, low selectivity, hemolytic toxicity and cost of manufacturing, hamper their massive clinical application. In the recent years—starting from CAMPs as template molecules—less toxic and lower-cost synthetic mimics of CAMPs, including cationic peptides, polymers and dendrimers, have been developed. Although the pending issue of hemolytic toxicity and biodegradability is still left not completely solved, cationic antimicrobial polymers (CAPs), compared to small drug molecules, thanks to their high molecular weight, own appreciable selectivity, reduced toxicity toward eukaryotic cells, more long-term activity, stability and non-volatility. With this background, an updated overview concerning the main manufactured types of CAPs, active on Gram-negative bacteria, is herein reported, including synthetic procedure and action’s mechanism. Information about their structures, antibacterial activity, advantages and drawbacks, was reported in the form of tables, which allow faster consultation and quicker learning concerning current CAPs state of the art, in order not to retrace reviews already available.

A facile preparation of a novel non-leaching antimicrobial waterborne polyurethane leather coating functionalized by quaternary phosphonium salt

The aim of this research is to develop a novel non-leaching antimicrobial waterborne polyurethane (WPU) leather coating material with covalently attached quaternary phosphonium salt (QPS). The structure of the QPS-bearing WPU has been identified, and their thermal stability, mechanical property, and antimicrobial performance have been investigated. The results reveal that the incorporation of QPS slightly reduces the thermal stability of WPU material but would not affects its usability as leather coating. Despite the presence of hydrophobic benzene in QPS structure, the strong hydration of its cationic groups leads to the increased surface contact angle (SCA) and water absorption rate (WAR) of the films, suggesting that the water resistance of the films needs to be improved for the purpose of leather coatings. Antibacterial tests demonstrate that when the QPS content is 20 wt%, QPS-bearing WPU shows effective antimicrobial activity against bacteria. The WPU containing QPS prepared in this study is a non-leaching antimicrobial material and has great potential application as leather coating.

Graphical abstract

Synthesis of sulfonium N-chloramines for antibacterial applications

Sulfonium N-chloramines were synthesized with significantly higher antibacterial efficacy than previous quaternary ammonium counterpart 1, and the highest efficacy was achieved for dodecyl chained N-chloramine 9 due to a synergistic biocidal effect.

Povidone-Iodine-Based Polymeric Nanoparticles for Antibacterial Applications

As microbial contamination is becoming more and more serious, antibacterial agents play an important role in preventing and removing bacterial pathogens from microbial pollution in our daily life. To solve the issues with water solubility and antibacterial stability of PVP-I₂ (povidone-iodine) as a strong antibacterial agent, we successfully obtain hydrophobic povidone-iodine nanoparticles (povidone-iodine NPs) by a two-step method related to the advantage of nanotechnology. First, the synthesis of poly(N-vinyl-2-pyrrolidone-co-methyl methacrylate) nanoparticles, i.e., P(NVP-MMA) NPs, was controlled by tuning a feed ratio of NVP to MMA. Then, the products P(NVP-MMA) NPs were allowed to undergo a complexation reaction with iodine, resulting in the formation of a water-insoluble antibacterial material, povidone-iodine NPs. It is found that the feed ratio of NVP to MMA has an active effect on morphology, chemical composition, molecular weight, and hydrophilic-hydrophobic properties of the P(NVP-MMA) copolymer after some technologies, such as SEM, DLS, elemental analysis, ¹H NMR, GPC, and the contact angle test, were used in the characterizations. The antibacterial property of povidone-iodine NPs was investigated by using Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), and Pseudomonas aeruginosa (P. aeruginosa) as model bacteria with the colony count method. Interestingly, three products, such as glue, ink, and dye, after the incorporation of povidone-iodine NPs, show significant antibacterial properties. It is believed that, with the advantage of nanoscale morphology, the final povidone-iodine NPs should have great potential for utilization in various fields where antifouling and antibacterial properties are highly required.

Synthesis of quaternary phosphonium N-chloramine biocides for antimicrobial applications

We synthesized a phosphoniumN-chloramine biocide which has distinctively higher antimicrobial efficacy than the previously developed ammonium counterpart.

Recent Developments in Antimicrobial Polymers: A Review

Antimicrobial polymers represent a very promising class of therapeutics with unique characteristics for fighting microbial infections. As the classic antibiotics exhibit an increasingly low capacity to effectively act on microorganisms, new solutions must be developed. The importance of this class of materials emerged from the uncontrolled use of antibiotics, which led to the advent of multidrug-resistant microbes, being nowadays one of the most serious public health problems. This review presents a critical discussion of the latest developments involving the use of different classes of antimicrobial polymers. The synthesis pathways used to afford macromolecules with antimicrobial properties, as well as the relationship between the structure and performance of these materials are discussed.