Bioactivity tests of calcium phosphates with variant molar ratios of main components

Hydroxyapatite coatings on cement paste as barriers against radiological contamination

A novel method for precipitating hydroxyapatite (HAp) onto cement paste is investigated for protecting concrete infrastructure from radiological contamination. Legacy nuclear sites contain large volumes of contaminated concrete and are expensive and dangerous to decommission. One solution is to 'design for decommissioning' by confining contaminants to a thin layer. Current layering methods, including paints or films, offer poor durability over plant lifespans. Here, we present a mineral-HAp-coated cement, which innovatively serves as a barrier layer to radioactive contaminants (e.g. Sr, U). HAp is shown to directly mineralise onto a cement paste block in a layer several microns thick via a two-step process: first, applying a silica-based scaffold onto a cement paste block; and second, soaking the resulting block in a PO₄-enriched Ringer's solution. Strontium ingression was tested on coated and uncoated cement paste (~ 40 × 40 × 40mm cement, 450 mL, 1000 mg L^- 1 Sr) for a period of 1-week. While both coated and uncoated samples reduced the solution concentration of Sr by half, Sr was held within the HAp layer of coated cement paste and was not observed within the cement matrix. In the uncoated samples, Sr had penetrated further into the block. Further studies aim to characterise HAp before and after exposure to a range of radioactive contaminants and to develop a method for mechanical layer separation.

A pH-neutral bioactive glass coated 3D-printed porous Ti6Al4V scaffold with enhanced osseointegration

Osseointegration is vital for the success of non-degradable implants like those made of titanium alloys. In order to promote osseointegration, implants are made porous, providing space for bone ingrowth. Despite extensive optimization of the pore geometry and porosity, bone ingrowth into implants is still marginal; further modification to promote bone ingrowth as well as osseointegration becomes paramount. In this study, a pH neutral bioactive glass with the composition of 10.8% P₂O₅-54.2% SiO₂-35% CaO (mol%; hereinafter referred to as PSC) was successfully coated on 3D-printed porous Ti6Al4V scaffolds using an in situ sol-gel method. This PSC coating is strongly bonded to the substrate and quickly induces the formation of hydroxyapatite on the scaffold surface upon contact with body fluid. In vitro, the PSC-coated Ti6Al4V scaffolds showed superior biocompatibility, cell proliferation promotion, cell adhesion, osteogenic differentiation and mineralization compared to their bare counterparts, implying better osseointegration. In vivo experiments confirmed this expectation; after being implanted, the coated scaffolds had more bone ingrowth and osseointegration, and consequently, higher push-out strength was achieved, proving the validity of the proposed concept in this study. In conclusion, PSC coating on 3D-printed porous Ti6Al4V scaffolds can improve osteogenesis, bone ingrowth, and osseointegration. Together with the versatility of this in situ sol-gel coating method, titanium alloy implants with better biological performances may be developed for immediate clinical applications.

In vitro and in vivo evaluation of the pH-neutral bioactive glass as high performance bone grafts

Osteogenic and angiogenic properties are two most valued factors for bone grafting materials. Biomedical materials with synergistic promotion effects on these two properties would be highly desirable. In this study, we showed that a recently developed pH-neutral bioactive glass (PSC) possessed such characteristics. Compared to two classical biomaterials, 45S5 bioactive glass and beta-tricalcium phosphate (β-TCP), PSC markedly improved BMSCs' proliferation, migration and mineralization as well as their osteogenic and angiogenic differentiation. In vivo, PSC showed better performance on inducing bone regeneration than both 45S5 and β-TCP, as featured by elevated bone mineral density (BMD) and new bone areas. PSC also significantly promoted new blood vessels formation compared with those in control groups. Furthermore, we revealed that PSC induced osteogenic and angiogenic differentiation of BMSCs through the PI3K/Akt/HIF-1α pathway, which had not been reported before. This synergistic effect of the PI3K/Akt/HIF-1α pathway on osteogenesis and angiogenic differentiation of BMSCs suggested that biomedical materials may promote new bone formation through multiple signal pathways, thus shedding light on the future development of materials with better performance.