Effects of the hierarchical macro/mesoporous structure on the osteoblast-like cell response

In vivo assessment of marine vs bovine origin collagen-based composite scaffolds promoting bone regeneration in a New Zealand rabbit model

The ability of human tissues to self-repair is limited, which motivates the scientific community to explore new and better therapeutic approaches to tissue regeneration. The present manuscript provides a comparative study between a marine-based composite biomaterial, and another composed of well-established counterparts for bone tissue regeneration. Blue shark skin collagen was combined with bioapatite obtained from blue shark's teeth (mColl:BAp), while bovine collagen was combined with synthetic hydroxyapatite (bColl:Ap) to produce 3D composite scaffolds by freeze-drying. Collagens showed similar profiles, while apatite particles differed in their composition, being the marine bioapatite a fluoride-enriched ceramic. The marine-sourced biomaterials presented higher porosities, improved mechanical properties, and slower degradation rates when compared to synthetic apatite-reinforced bovine collagen. The in vivo performance regarding bone tissue regeneration was evaluated in defects created in femoral condyles in New Zealand rabbits twelve weeks post-surgery. Micro-CT results showed that mColl:BAp implanted condyles had a slower degradation and an higher tissue formation (17.9 ± 6.9 %) when compared with bColl:Ap implanted ones (12.9 ± 7.6 %). The histomorphometry analysis provided supporting evidence, confirming the observed trend by quantifying 13.1 ± 7.9 % of new tissue formation for mColl:BAp composites and 10.4 ± 3.2 % for bColl:Ap composites, suggesting the potential use of marine biomaterials for bone regeneration.

New antibacterial hydrogels based on sodium alginate

Nowadays, the combined knowledge and experience in biomedical research and material sciences results in the innovation of smart materials that could efficiently overcome the problems of microbial contaminations. Herein, a new drug delivery platform prepared by grafting sodium alginate with β-carboxyethyl acrylate and acrylamide was described and characterized. 9-Aminoacridine (9-AA), and kanamycin sulfate (KS) were separately loaded into the hydrogel in situ during graft polymerization. The grafting efficiency for the resulting hydrogels was 70.01-78.08 %. The chemical structure of the hydrogels, thermogravimetric analysis, and morphological features were investigated. The swelling study revealed that the hydrogel without drugs achieved a superior swelling rate compared to drug-loaded hydrogels. The hydrogel tuned the drug-release rate in a pH-dependent manner. Furthermore, the antibacterial study suggested that the hydrogels encapsulating 9-AA (88.6 %) or KS (89.3 %) exhibited comparable antibacterial activity against Gram-positive and Gram-negative bacterial strains. Finally, the cytocompatibility study conducted on normal lung cell line (Vero cells) demonstrated neglectable to tolerable toxicity for the drug-loaded hydrogel. More interestingly, the cell viability for the blank hydrogel was 92.5 %, implying its suitability for biomedical applications.

Study on the influence of scaffold morphology and structure on osteogenic performance

The number of patients with bone defects caused by various bone diseases is increasing yearly in the aging population, and people are paying increasing attention to bone tissue engineering research. Currently, the application of bone tissue engineering mainly focuses on promoting fracture healing by carrying cytokines. However, cytokines implanted into the body easily cause an immune response, and the cost is high; therefore, the clinical treatment effect is not outstanding. In recent years, some scholars have proposed the concept of tissue-induced biomaterials that can induce bone regeneration through a scaffold structure without adding cytokines. By optimizing the scaffold structure, the performance of tissue-engineered bone scaffolds is improved and the osteogenesis effect is promoted, which provides ideas for the design and improvement of tissue-engineered bones in the future. In this study, the current understanding of the bone tissue structure is summarized through the discussion of current bone tissue engineering, and the current research on micro-nano bionic structure scaffolds and their osteogenesis mechanism is analyzed and discussed.

The 3D-Printed Ordered Bredigite Scaffold Promotes Pro-Healing of Critical-Sized Bone Defects by Regulating Macrophage Polarization

Background

Repairing critical-sized bone defects secondary to traumatic or tumorous damage is a complex conundrum in clinical practice; in this case, artificial scaffolds exhibited preferable outcomes. Bredigite (BRT, Ca₇MgSi₄O₁₆) bioceramic possesses excellent physicochemical properties and biological activity as a promising candidate for bone tissue engineering.

Methods

Structurally ordered BRT (BRT-O) scaffolds were fabricated by a three-dimensional (3D) printing technique, and the random BRT (BRT-R) scaffolds and clinically available β-tricalcium phosphate (β-TCP) scaffolds were compared as control groups. Their physicochemical properties were characterized, and RAW 264.7 cells, bone marrow mesenchymal stem cells (BMSCs), and rat cranial critical-sized bone defect models were utilized for evaluating macrophage polarization and bone regeneration.

Results

The BRT-O scaffolds exhibited regular morphology and homogeneous porosity. In addition, the BRT-O scaffolds released higher concentrations of ionic products based on coordinated biodegradability than the β-TCP scaffolds. In vitro, the BRT-O scaffolds facilitated RWA264.7 cells polarization to pro-healing M2 macrophage phenotype, whereas the BRT-R and β-TCP scaffolds stimulated more pro-inflammatory M1-type macrophages. A conditioned medium derived from macrophages seeding on the BRT-O scaffolds notably promoted the osteogenic lineage differentiation of BMSCs in vitro. The cell migration ability of BMSCs was significantly enhanced under the BRT-O-induced immune microenvironment. Moreover, in rat cranial critical-sized bone defect models, the BRT-O scaffolds group promoted new bone formation with a higher proportion of M2-type macrophage infiltration and expression of osteogenesis-related markers. Therefore, in vivo, BRT-O scaffolds play immunomodulatory roles in promoting critical-sized bone defects by enhancing the polarization of M2 macrophages.

Conclusion

3D-printed BRT-O scaffolds can be a promising option for bone tissue engineering, at least partly through macrophage polarization and osteoimmunomodulation.

Fabrication of BMP-2-peptide-Deferoxamine- and QK-peptide-functionalized nanoscaffolds and their application for bone defect treatment

The microenvironment in the healing process of large bone defects requires suitable conditions to promote osteogenesis and angiogenesis. Coaxial electrospinning is a mature method in bone tissue engineering (BTE) and allows functional modification. Appropriate modification methods can be used to improve the bioactivity of scaffolds for BTE. In this study, coaxial electrospinning with QK peptide (a Vascular endothelial growth factor mimetic peptide) and BMP-2 peptide-DFO (BD) was performed to produce double-modified PQBD scaffolds with vascularizing and osteogenic features. The morphology of coaxially electrospun scaffolds was verified by scanning electron microscopy (SEM) and transmission electron microscopy. Laser scanning confocal microscopy and Fourier transform infrared spectroscopy confirmed that BD covalently bound to the surface of the P and PQ scaffolds. In vitro, the PQBD scaffold promoted the adhesion and proliferation of bone marrow stromal cells (BMSCs). Both QK peptide and BD showed sustainable release and preservation of biological activity, enhancing the osteogenic differentiation of BMSCs and the migration of human umbilical vein endothelial cells and promoting angiogenesis. The combined ability of these factors to promote osteogenesis and angiogenesis is superior to that of each alone. In vivo, the PQBD scaffold was implanted into the bone defect, and after 8 weeks, the defect area was almost completely covered by new bone tissue. Histology showed more mature bone tissue and more blood vessels. PQBD scaffolds promote both angiogenesis and osteogenesis, offering a promising approach to enhance bone regeneration in the treatment of large bone defects.

Sequential macrophage transition facilitates endogenous bone regeneration induced by Zn-doped porous microcrystalline bioactive glass

Macrophages play an important role in the immune microenvironment during bone healing, and sequential macrophage phenotypic transition could achieve superior osteogenic outcomes. Microcrystalline bioactive glasses (MCBGs) with osteoimmunomodulatory effects show potential in bone tissue regeneration. Zinc (Zn) has been approved to coordinate innate and adaptive immunity. Therefore, in this study, different amounts of ZnO were incorporated into microcrystalline bioactive glass to improve its immunomodulatory ability. The effect of Zn-MCBG ionic extracts on macrophage transition was studied, and the 5Zn-MCBG extracts could orchestrate sequential M1-to-M2 macrophage transition and promote the expression of proinflammatory and anti-inflammatory genes and cytokine expression to induce human bone marrow stromal cells (hBMSCs) osteogenic differentiation in vitro. Macroporous Zn-MCBG scaffolds containing mesopores were fabricated and showed good cell adhesion and feasible apatite formation when immersed in SBF in vitro. Furthermore, a rat calvarial defect model was used to confirm that the Zn-MCBG scaffold could modulate macrophage phenotypic transition and create a desirable osteogenic microenvironment to promote osteogenesis in vivo.

Enhanced osteogenesis properties of titanium implant materials by highly uniform mesoporous thin films of hydroxyapatite and titania intermediate layer

Titanium (Ti) has been widely used for medical and dental applications; however, bare Ti cannot be properly connected to a living bone, and hence some modifications are needed for this purpose. The present study describes the synthesis of mesoporous hydroxyapatite thin films (MHF) on titanium implant materials for speeding up and shortening the processes of osteointegration. The uniform MHF was coated on a Ti substrate following the insertion of intermediate titania (TiO₂) film via the sol-gel dip-coating method. The intermediate titania layer improved the bonding strength between the MHF and Ti substrate. MHFs were synthesized using a precursor solution containing phosphoric acid, calcium nitrate tetrahydrate, and a nonionic surfactant (C₁₂E₁₀) as the phosphate source, calcium source, and structure-directing agent, respectively. The effect of calcination temperature on phase composition, morphology, microstructure, roughness, and wettability of the MHFs was investigated using XRD, FE-SEM, COM, AFM, and contact angle measurement. The XRD results revealed the crystalline hydroxyapatite phase, which was improved with an increase in the calcination temperature. Moreover, the FE-SEM images showed the crack-free MHFs, uniform thickness of the layer, and mesoporous surface morphology. In addition, it was found that the roughness and wettability of the samples change upon the alteration of calcination temperature. The biological studies demonstrated that MHFs support the adhesion and proliferation of the mesenchymal stem cells (MSCs) and guid them toward osteogenic differentiation. Therefore, the MHFs prepared in this study may be useful in a wide range of applications, particularly in bone regeneration medicine.

Micro/nanostructured TiO2/ZnO coating enhances osteogenic activity of SaOS-2 cells

Although titanium implants account for a large proportion of the commercial dental market, their bioactivity are inadequate in many applications. A micro- and nano- scale hierarchical surface topography of the implant is suggested for rapid osseointegration from the biomimetic perspective. Moreover, Zinc (Zn) is an essential element in the skeletal system. Thus, a micro/nanostructured TiO₂/ZnO coating, produced by micro-arc oxidation, and hydrothermal treatment, and heat treatment, was designed to endow the implant surface with enhanced osteogenic capacity. Physiochemical properties and biological effects of this coating were investigated in our study. The annealed micro/nanostructured TiO₂/ZnO coating exhibited higher hydrophilicity and fibronectin adsorption ability compared to the micro-arc oxidation modified TiO₂ coating. SaOS-2 cells grown on the annealed micro/nanostructured TiO₂/ZnO coating showed increased alkaline phosphatase activity and collagen secretion, and immunofluorescence labeling revealed an upregulation of osteopontin, collagen type ι and osteocalcin. The micro/nanostructure and incorporation of Zn were considered to perform positive effect on the enhanced osteogenic activity of SaOS-2 cells. In conclusion, the micro/nanostructured TiO₂/ZnO structure is simple, stable, and easy to produce and scale up, has promising applications in the surface modification of titanium implants.

La-Doped mesoporous calcium silicate/chitosan scaffolds for bone tissue engineering

Trace rare earth elements such as lanthanum (La) regulated effectively bone tissue performances; however, the underlying mechanism remains unknown. In order to accelerate bone defects especially in patients with osteoporosis or other metabolic diseases, we firstly constructed lanthanum-doped mesoporous calcium silicate/chitosan (La-MCS/CTS) scaffolds by freeze-drying technology. During the freeze-drying procedure, three-dimensional macropores were produced within the La-MCS/CTS scaffolds by using ice crystals as templates, and the La-MCS nanoparticles were distributed on the macropore walls. The hierarchically porous structures and biocompatible components contributed to the adhesion, spreading and proliferation of rat bone marrow-derived mesenchymal stem cells (rBMSCs), and accelerated the in-growth of new bone tissues. Particularly, the La3+ ions in the bone scaffolds remarkably induced the osteogenic differentiation of rBMSCs via the activation of the TGF signal pathway. A critical-sized calvarial-defect rat model further revealed that the La-MCS/CTS scaffolds significantly promoted new bone regeneration as compared with pure MCS/CTS scaffolds. In conclusion, the La-MCS/CTS scaffold showed the prominent ability in osteogenesis and bone regeneration, which showed its application potential for bone defect therapy.

Gadolinium-doped mesoporous calcium silicate/chitosan scaffolds enhanced bone regeneration ability

Chitosan (CTS) and mesoporous calcium silicate (MCS) have been developed for bone defect healing; however, their bone regeneration capacity still does not satisfy the patients with bone diseases. Gadolinium (Gd) is accumulated in human bones, and plays a beneficial role in regulating cell performance and bone regeneration. We firstly constructed Gd-doped MCS/CTS (Gd-MCS/CTS) scaffolds by a lyophilization technology. The interconnected arrangement of CTS films lead to forming macropores by using ice crystals as templates during the lyophilization procedure, and the Gd-MCS nanoparticles dispersed uniformly on the macropore walls. The biocompatible chemical components and hierarchical pores facilitated the attachment and spreading of rat bone marrow-derived mesenchymal stem cells (rBMSCs). Interestingly, the Gd dopants in the scaffolds effectively activated the Wnt/β-catenin signaling pathway, resulting in excellent cell proliferation and osteogenic differentiation capacities. The osteogenic-related genes such as alkaline phosphatase (ALP), runt-related transcription factor 2 (Runx2) and collagen type1 (COL-1) were remarkably up-regulated by Gd-MCS scaffolds as compared with MCS scaffolds, and their expression levels increased in a positive correlation with Gd doping amounts. Moreover, in vivo rat cranial defect tests further confirmed that Gd-MCS/CTS scaffolds significantly stimulated collagen deposition and new bone formation. The exciting finding suggested the beneficial effects of Gd³⁺ ions on osteogenic differentiation and new bone regeneration, and Gd-MCS/CTS scaffolds can be employed as a novel platform for bone defect healing.

Stability and osteogenic potential evaluation of micro-patterned titania mesoporous-nanotube structures

Background: Although titanium dioxide nanotubes (TNTs) had great potential to promote osteogenesis, their weak bonding strength with titanium substrates greatly limited their clinical application. Purpose: The objective of this study was to maintain porosity and improve the stability of TNT coatings by preparing some micro-patterned mesoporous/nanotube (MP/TNT) structures via a photolithography-assisted anodization technology. Methods: The adhesion strength of different coatings was studied by ultrasonic cleaning machine and scratch tester. The early adhesion, spreading, proliferation and differentiation of MC3T3-E1 cells on different substrates were investigated in vitro by fluorescent staining, CCK8, alkaline phosphatase activity, mineralization and polymerase chain reaction assays, respectively. Results: Results of ultrasonic and scratch assays showed that the stability of TNTs (especially 125 nm) was significantly improved after being patterned with MP structures. In vitro cell assays further demonstrated that the insertion of MP structure into 125 nm TNT coating, which was denoted as MP125, could effectively improve the early adhesion, spreading and proliferation of surface MC3T3-E1 cells without damaging their osteogenic differentiation. Conclusion: We determined that the MP/TNT patterned samples (especially MP125) have excellent stability and osteogenesis properties, and may have better clinical application prospects.

A three-dimensional (3D) printed biomimetic hierarchical scaffold with a covalent modular release system for osteogenesis

Hydroxyapatite (HA) ceramics are well known for their biocompatibility, bioactivity, and osteoconductive nature. However, limited hierarchical structure and lack of ease in modularity hinder the widespread application of conventional HA ceramics. By using three-dimensional printing (3DP) techniques with multiple materials, including HA, complex biological and mechanical architecture of natural organisms can be achieved through biomimetics. In this study, we designed an osteoid, biomimetic, hierarchical, porous HA ceramic 3D printed scaffold (3DPs). Further incorporation of a covalent, modular, controlled release system (CMR), based on Watson-Crick's complementary oligonucleotides, and was added to carry a bone morphogenetic protein-2 (BMP2) peptide. The choice of a HA biomimetic scaffold housing BMP2 protein fragments was selected to successfully promote osteogenesis both in vitro and in vivo. Scanning electron microscopy, micro-computed tomography analysis and computer fluid dynamics simulations of the 3DPs showed a uniform biomimetic hierarchical structure and an effective interior permeability. Active molecules were found bound with high stability and modular to the scaffold surface via the CMR system. After 7 days of incubation under physiological conditions, approximately 90% of active factors remained bound. Compared to control groups, the 3DPs-CMR-BMP2 group significantly enhanced cell proliferation and adhesion. Moreover, the 3DPs-CMR-BMP2 group exhibited more extensive and sustained osteogenic effects through upregulated expression of osteogenic factors and enhanced calcium deposition, as compared to study and control groups. Furthermore, ectopic osteogenesis and a critical calvarial defect model confirmed that the 3DPs-CMR-BMP2 group significantly promoted in vivo bone healing versus control. Thus, our results showed that biomimetic hierarchical 3DPs with a CMR system successfully promote cell proliferation, adhesion, differentiation and osteogenesis, on a continuous cycle. The biomimetic hierarchical 3DPs with a CMR system offers a promising multi-functional, bone substitute material for treatment of patients with bone defects.

Sterile and Dual-Porous Aerogels Scaffolds Obtained through a Multistep Supercritical CO₂-Based Approach

Aerogels from natural polymers are endowed with attractive textural and biological properties for biomedical applications due to their high open mesoporosity, low density, and reduced toxicity. Nevertheless, the lack of macroporosity in the aerogel structure and of a sterilization method suitable for these materials restrict their use for regenerative medicine purposes and prompt the research on getting ready-to-implant dual (macro + meso)porous aerogels. In this work, zein, a family of proteins present in materials for tissue engineering, was evaluated as a sacrificial porogen to obtain macroporous starch aerogels. This approach was particularly advantageous since it could be integrated in the conventional aerogel processing method without extra leaching steps. Physicochemical, morphological, and mechanical characterization were performed to study the effect of porogen zein at various proportions (0:1, 1:2, and 1:1 zein:starch weight ratio) on the properties of the obtained starch-based aerogels. From a forward-looking perspective for its clinical application, a supercritical CO₂ sterilization treatment was implemented for these aerogels. The sterilization efficacy and the influence of the treatment on the aerogel final properties were evaluated mainly in terms of absence of microbial growth, cytocompatibility, as well as physicochemical, structural, and mechanical modifications.