Administration of pamidronate alters bone-titanium attachment in the presence of endotoxin-coated polyethylene particles

Osseointegration Pharmacology: A Systematic Mapping Using Artificial Intelligence

Clinical performance of osseointegrated implants could be compromised by the medications taken by patients. The effect of a specific medication on osseointegration can be easily investigated using traditional systematic reviews. However, assessment of all known medications requires the use of evidence mapping methods. These methods allow assessment of complex questions, but they are very resource intensive when done manually. The objective of this study was to develop a machine learning algorithm to automatically map the literature assessing the effect of medications on osseointegration. Datasets of articles classified manually were used to train a machine-learning algorithm based on Support Vector Machines. The algorithm was then validated and used to screen 599,604 articles identified with an extremely sensitive search strategy. The algorithm included 281 relevant articles that described the effect of 31 different drugs on osseointegration. This approach achieved an accuracy of 95%, and compared to manual screening, it reduced the workload by 93%. The systematic mapping revealed that the treatment outcomes of osseointegrated medical devices could be influenced by drugs affecting homeostasis, inflammation, cell proliferation and bone remodeling. The effect of all known medications on the performance of osseointegrated medical devices can be assessed using evidence mappings executed with highly accurate machine learning algorithms.

Optimizing a micro-computed tomography-based surrogate measurement of bone-implant contact

Histology and backscatter scanning electron microscopy (bSEM) are the current gold standard methods for quantifying bone-implant contact (BIC), but are inherently destructive. Microcomputed tomography (μCT) is a non-destructive alternative, but attempts to validate μCT-based assessment of BIC in animal models have produced conflicting results. We previously showed in a rat model using a 1.5 mm diameter titanium implant that the extent of the metal-induced artefact precluded accurate measurement of bone sufficiently close to the interface to assess BIC. Recently introduced commercial laboratory μCT scanners have smaller voxels and improved imaging capabilities, possibly overcoming this limitation. The goals of the present study were to establish an approach for optimizing μCT imaging parameters and to validate μCT-based assessment of BIC. In an empirical parametric study using a 1.5 mm diameter titanium implant, we determined 90 kVp, 88 µA, 1.5 μm isotropic voxel size, 1600 projections/180°, and 750 ms integration time to be optimal. Using specimens from an in vivo rat experiment, we found significant correlations between bSEM and μCT for BIC with the manufacturer's automated analysis routine (r = 0.716, p = 0.003) or a line-intercept method (r = 0.797, p = 0.010). Thus, this newer generation scanner's improved imaging capability reduced the extent of the metal-induced artefact zone enough to permit assessment of BIC. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:979-986, 2018.

Arthrotomy-based preclinical models of particle-induced osteolysis: A systematic review

We completed a systematic literature review of in vivo animal models that use arthrotomy-based methods to study particle-induced peri-implant osteolysis. The purpose of the review was to characterize the models developed to date, to determine the questions addressed, to assess scientific rigor and transparency, and to identify gaps in knowledge. We probed three literature databases (Medline, Embase, and Scopus) and found 77 manuscripts that fit the search parameters. In the most recent 10 years, researchers mainly used rat and mouse models, whereas in the previous 20 years, large animal, canine, and rabbit models were more common. The studies have demonstrated several pathophysiology pathways, including macrophage migration, particle phagocytosis, increased local production of cytokines and lysosomal enzymes, elevated bone resorption, and suppressed bone formation. The effect of variation in particle characteristics and concentration received limited attention with somewhat mixed findings. Particle contamination by endotoxin was shown to exacerbate peri-implant osteolysis. The possibility of early diagnosis was demonstrated through imaging and biomarker approaches. Several studies showed that both local and systemic delivery of bisphosphonates inhibits the development of particle-induced osteolysis. Other methods of inhibiting osteolysis include the use of anabolic agents and altering the implant design. Few studies examined non-surgical rescue of loosened implants, with conflicting results with alendronate. We found that the manuscripts often lacked the methodological detail now advocated by the ARRIVE guidelines, suggesting that improvement in reporting would be useful to maximize rigor and transparency. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:2595-2605, 2017.

Bone turnover markers correlate with implant fixation in a rat model using LPS-doped particles to induced implant loosening

Revision surgery for particle-induced implant loosening in total joint replacement is expected to increase dramatically over the next few decades. This study was designed to investigate if local tissue and serum markers of bone remodeling reflect implant fixation following administration of lipopolysaccharide (LPS)-doped polyethylene (PE) particles in a rat model. Twenty-four rats received bilateral implantation of intramedullary titanium rods in the distal femur, followed by weekly bilateral intra-articular injection of either LPS-doped PE particles (n = 12) or vehicle that contained no particles (n = 12) for 12 weeks. The group in which the particles were injected had increased serum C-terminal telopeptide of type I collagen (CTX-I), decreased serum osteocalcin (OC), increased peri-implant eroded surface, decreased peri-implant bone volume, and decreased mechanical pull-out strength compared to the controls. Implant fixation strength was positively correlated with peri-implant bone volume and serum OC and inversely correlated with serum CTX-I, while energy to yield was positively correlated with serum OC and inversely correlated with the number of tartrate-resistant acid phosphatase positive cells at the interface and the amount of peri-implant eroded surface. There was no effect on trabecular bone volume at a remote site. Thus, the particle-induced impaired fixation in this rat model was directly associated with local and serum markers of elevated bone resorption and depressed bone formation, supporting the rationale of exploring both anticatabolic and anabolic strategies to treat and prevent particle-related implant osteolysis and loosening, and indicating that serum markers may prove useful in tracking implant fixation.

Limitations of using micro-computed tomography to predict bone-implant contact and mechanical fixation

Fixation of metallic implants to bone through osseointegration is important in orthopaedics and dentistry. Model systems for studying this phenomenon would benefit from a non-destructive imaging modality so that mechanical and morphological endpoints can more readily be examined in the same specimens. The purpose of this study was to assess the utility of an automated microcomputed tomography (μCT) program for predicting bone-implant contact (BIC) and mechanical fixation strength in a rat model. Femurs in which 1.5-mm-diameter titanium implants had been in place for 4 weeks were either embedded in polymethylmethacrylate (PMMA) for preparation of 1-mm-thick cross-sectional slabs (16 femurs: 32 slabs) or were used for mechanical implant pull-out testing (n= 18 femurs). All samples were scanned by μCT at 70 kVp with 16 μm voxels and assessed by the manufacturer's software for assessing 'osseointegration volume per total volume' (OV/TV). OV/TV measures bone volume per total volume (BV/TV) in a 3-voxel-thick ring that by default excludes the 3 voxels immediately adjacent to the implant to avoid metal-induced artefacts. The plastic-embedded samples were also analysed by backscatter scanning electron microscopy (bSEM) to provide a direct comparison of OV/TV with a well-accepted technique for BIC. In μCT images in which the implant was directly embedded within PMMA, there was a zone of elevated attenuation (>50% of the attenuation value used to segment bone from marrow) which extended 48 μm away from the implant surface. Comparison of the bSEM and μCT images showed high correlations for BV/TV measurements in areas not affected by metal-induced artefacts. In addition for bSEM images, we found that there were high correlations between peri-implant BV/TV within 12 μm of the implant surface and BIC (correlation coefficients ≥0.8, p < 0.05). OV/TV as measured on μCT images was not significantly correlated with BIC as measured on the corresponding bSEM images. However, OV/TV was significantly, but weakly, correlated with implant pull-out strength (r= 0.401, p= 0.049) and energy to failure (r= 0.435, p= 0.035). Thus, the need for the 48-μm-thick exclusion zone in the OV/TV program to avoid metal-induced artefacts with the scanner used in this study means that it is not possible to make bone measurements sufficiently close to the implant surface to obtain an accurate assessment of BIC. Current generation laboratory-based μCT scanners typically have voxel sizes of 6-8 μm or larger which will still not overcome this limitation. Thus, peri-implant bone measurements at these resolutions should only be used as a guide to predict implant fixation and should not be over-interpreted as a measurement of BIC. Newer generation laboratory-based μCT scanners have several improvements including better spatial resolution and X-ray sources and appear to have less severe metal-induced artefacts, but will need appropriate validation as they become available to researchers. Regardless of the μCT scanner being used, we recommend that detailed validation studies be performed for any study using metal implants because variation in the composition and geometry of the particular implants used may lead to different artefact patterns.

In vivo response to cross-linked polyethylene and polycarbonate-urethane particles

This study was undertaken to examine macrophage response to polycarbonate-urethane, a proposed alternative material to polyethylene in acetabular components of total hip arthroplasty. Polyethylene wear debris from total joint replacements has been linked to osteolysis and implant lifespan. It has been shown in vitro, that polyethylene particles cleaned of endotoxin generate less of an inflammatory cytokine response than endotoxin bound particles. Comparative particle induced effects on implant fixation were tested using endotoxin free cross-linked ultra-high molecular weight polyethylene (x-UHMWPE) and polycarbonate-urethane (PCU) particles with and without intraperitoneal injection (IP) of lipopolysaccharide (LPS) using a Ti-alloy femoral intramedullary nail rat model. MicroCT and mechanical testing assessment of peri-implant bone indicated significantly less bone and lower fixation strength, respectively, when the implant was surrounded by xUHMWPE particles compared to PCU particles (with and without LPS IP). This indicates particles of PCU may be less disruptive to bone-implant fixation than x-UHMWPE in vivo, under both LPS free and challenged conditions.

In vitro macrophage response to polyethylene and polycarbonate-urethane particles

This study was undertaken to compare macrophage response to polycarbonate-urethane (PCU), a proposed alternative material to polyethylene in acetabular components of total hip arthroplasty to cross-linked ultra-high molecular weight polyethylene (xUHMWPE) in the presence or absence of endotoxin. Polyethylene wear debris that is generated by total hip and knee replacements has been linked to osteolysis and limiting the lifespan of the implant. We added both lipopolysaccharide (LPS)-free and endotoxin-associated xUHMWPE and PCU particles to a human monocyte cell line (TH1) in culture and measured cell viability and tumor necrosis factor (TNF)alpha, interleukin (IL)-1beta, and prostaglandin E(2) (PGE(2)) in the medium after 24 h. Results indicate that particles (both xUHMWPE and PCU) free of endotoxin did not significantly induce secretion of TNFalpha, IL-1beta, or PGE(2) above basal levels. However, endotoxin-exposed PCU particles induced significantly less TNFalpha and IL-1beta than endotoxin-exposed xUHMWPE particles. This indicates that if endotoxin is available for binding to particles in vivo, then xUHMWPE may be more inflammatory to periprosthetic tissue and bone in part because of its affinity/reactivity with endotoxin when compared with PCU.