In vivo response of porous hydroxyapatite and beta-tricalcium phosphate prepared by aqueous solution combustion method and comparison with bioglass scaffolds

Osseointegration Potential Assessment of Bone Graft Materials Loaded with Mesenchymal Stem Cells in Peri-Implant Bone Defects

Many studies have been exploring the use of bone graft materials (BGMs) and mesenchymal stem cells in bone defect reconstruction. However, the regeneration potential of Algipore (highly purified hydroxyapatite) and Biphasic (hydroxyapatite/beta-tricalcium phosphate) BGMs combined with bone marrow-derived mesenchymal stem cells (BMSCs) remains unclear. Therefore, we evaluated their osseointegration capacities in reconstructing peri-implant bone defects. The cellular characteristics of BMSCs and the material properties of Algipore and Biphasic were assessed in vitro. Four experimental groups-Algipore, Biphasic, Algipore+BMSCs, and Biphasic+BMSCs-were designed in a rabbit tibia peri-implant defect model. Implant stability parameters were measured. After 4 and 8 weeks of healing, all samples were evaluated using micro-CT, histological, and histomorphometric analysis. In the energy-dispersive X-ray spectroscopy experiment, the Ca/P ratio was higher for Algipore (1.67) than for Biphasic (1.44). The ISQ values continuously increased, and the PTV values gradually decreased for all groups during the healing period. Both Algipore and Biphasic BGM promoted new bone regeneration. Higher implant stability and bone volume density were observed when Algipore and Biphasic BGMs were combined with BMSCs. Biphasic BGM exhibited a faster degradation rate than Algipore BGM. Notably, after eight weeks of healing, Algipore with BSMCs showed more bone-implant contact than Biphasic alone (p < 0.05). Both Algipore and Biphasic are efficient in reconstructing peri-implant bone defects. In addition, Algipore BGM incorporation with BSMCs displayed the best performance in enhancing implant stability and osseointegration potential.

Poly-ε-Caprolactone 3D-Printed Porous Scaffold in a Femoral Condyle Defect Model Induces Early Osteo-Regeneration

Large bone reconstruction following trauma poses significant challenges for reconstructive surgeons, leading to a healthcare burden for health systems, long-term pain for patients, and complex disorders such as infections that are difficult to resolve. The use of bone substitutes is suboptimal for substantial bone loss, as they induce localized atrophy and are generally weak, and unable to support load. A combination of strong polycaprolactone (PCL)-based scaffolds, with an average channel size of 330 µm, enriched with 20% w/w of hydroxyapatite (HA), β-tricalcium phosphate (TCP), or Bioglass 45S5 (Bioglass), has been developed and tested for bone regeneration in a critical-size ovine femoral condyle defect model. After 6 weeks, tissue ingrowth was analyzed using X-ray computed tomography (XCT), Backscattered Electron Microscopy (BSE), and histomorphometry. At this point, all materials promoted new bone formation. Histological analysis showed no statistical difference among the different biomaterials (p > 0.05), but PCL-Bioglass scaffolds enhanced bone formation in the center of the scaffold more than the other types of materials. These materials show potential to promote bone regeneration in critical-sized defects on load-bearing sites.

Intrabony defect management with a bone graft (hydroxyapatite and β-tricalcium phosphate) alone and in combination with a diode laser: A randomized control trial

Objectives

The current research was conducted to evaluate the use of a diode laser and a bone graft (hydroxyapatite [HA] + β-tricalcium phosphate [β-TCP]) in healing of intrabony defects.

Materials and Methods

In this split-mouth evaluation, 40 patients with bilateral intrabony defects were treated with, Group I (control) - bone graft alone (HA + β-TCP) and Group II, (test) - bone graft with a diode laser. The clinical and radiologic parameters of all patients, such as plaque index (PI), probing depth (PD), gingival index (GI), gingival recession (GR), and relative clinical attachment level (RCAL) were recorded at baseline, after 3 months and after 6 months.

Results

Reductions in PI, PD, GI, GR, and RCAL were found after 6 months. Furthermore, significant differences were displayed in the intra-group comparison while those of the inter-group evaluation (P > 0.05) were insignificant.

Conclusion

In both groups, considerable decrease in intrabony pockets was discovered; however, the inter-group comparison was insignificant in relation to GR and RCAL.

Materials in the Na2O-CaO-SiO2-P2O5 System for Medical Applications

Calcium phosphate materials and materials based on silicon dioxide have been actively studied for more than 50 years due to their high biocompatibility and bioactivity. Hydroxyapatite and tricalcium phosphate are the most known among calcium phosphate materials, and Bioglass 45S5 is the most known material in the Na2O-CaO-SiO2-P2O5 system. Each of these materials has its application limits; however, some of them can be eliminated by obtaining composites based on calcium phosphate and bioglass. In this article, we provide an overview of the role of silicon and its compounds, including Bioglass 45S5, consider calcium phosphate materials, talk about the limits of each material, demonstrate the potential of the composites based on them, and show the other ways of obtaining composite ceramics in the Na2O-CaO-SiO2-P2O5 system.

In Vitro and In Vivo Bone Regeneration Assessment of Titanium-Doped Waste Eggshell-Derived Hydroxyapatite in the Animal Model

In this work, a titanium-doped hydroxyapatite (HAp) scaffold was produced from two different sources (natural eggshell and laboratory-grade reagents) to compare the efficacy of natural and synthetic resources of HAp materials on new bone regeneration. This comparative study also reports the effect of Ti doping on the physical, mechanical, and in vitro as well as in vivo biological properties of the HAp scaffold. Pellets were prepared in the conventional powder metallurgy route, compacted, and sintered at 900 °C, showing sufficient porosity for bony ingrowth. The physical-mechanical characterizations were performed by density, porosity evaluation, XRD, FTIR, SEM analysis, and hardness measurement. In vitro interactions were evaluated by bactericidal assay, hemolysis, MTT assay, and interaction with simulated body fluid. All categories of pellets showed absolute nonhemolytic and nontoxic character. Furthermore, significant apatite formation was observed on the Ti-doped HAp samples in the simulated body fluid immersion study. The developed porous pellets were implanted to assess the bone defect healing in the femoral condyle of healthy rabbits. A 2 month study after implantation showed no marked inflammatory reaction for any samples. Radiological analysis, histological analysis, SEM analysis, and oxytetracycline labeling studies depicted better invasion of mature osseous tissue in the pores of doped eggshell-derived HAp scaffolds as compared to the undoped HAp, and laboratory-made samples. Quantification using oxytetracycline labeling depicted 59.31 ± 1.89% new bone formation for Ti-doped eggshell HAp as compared to Ti-doped pure HAp (54.41 ± 1.93) and other undoped samples. Histological studies showed the presence of abundant osteoblastic and osteoclastic cells in Ti-doped eggshell HAp in contrast to other samples. Radiological and SEM data also showed similar results. The results indicated that Ti-doped biosourced HAp samples have good biocompatibility, new bone-forming ability, and could be used as a bone grafting material in orthopedic surgery.

Analyzing the anti-caries effect of fluoride varnish containing tricalcium phosphate using PIXE/PIGE

This study evaluated the effect of tricalcium phosphate-containing fluoride varnish on the prevention of root caries using an in-air micro-proton induced X-ray/gamma-ray emission system and microcomputed tomography. Either fluoride varnish (FV) or tricalcium phosphate-containing fluoride varnish (WV) was applied to root dentin, whereas dentin without varnish were considered controls. After immersion in saline, dentin sections were prepared, and concentration of fluoride ion was measured. These specimens were demineralized, and the mineral loss was measured. Caries inhibition in sound and demineralized dentin was observed in both FV and WV groups compared to the control group. Significantly low mineral loss was found especially in the demineralized dentin, which is probably due to the combination effect of calcium and fluoride ions at a concentration range of 100,000 ppm, as supplied by the varnish. The use of calcium-containing fluoride varnish, especially in demineralized dentin, is effective in arresting initial dentin caries.

3D scaffolds of caprolactone/chitosan/polyvinyl alcohol/hydroxyapatite stabilized by physical bonds seeded with swine dental pulp stem cell for bone tissue engineering

Bone Regeneration represents a clinical need, related to bone defects such as congenital anomalies, trauma with bone loss, and/or some pathologies such as cysts or tumors This is why a polymeric biomaterial that mimics the osteogenic composition and structure represents a high potential to face this problem. The method of obtaining these materials was first to prepare a stabilized hydrogel by means of physical bonds and then to make use of the lyophilization technique to obtain the 3D porous scaffolds with temperature conditions of -58 °C and pressure of 1 Pa for 16 h. The physicochemical and bioactive properties of the scaffolds were studied. FTIR and TGA results confirm the presence of the initial components in the 3d matrix of the scaffold. The scaffolds exhibited a morphology with pore size and interconnectivity that promote good cell viability. Together, the cell viability and proliferation test, Alamar Blue^TM and the differentiation test: alizarin staining, showed the ability of physically stabilized scaffolds to proliferate and differentiate swine dental pulp stem cell (DPSCs) followed by mineralization. Therefore, the Cs-PCL-PVA-HA scaffold stabilized by physical bonds has characteristics that suggest great utility for future complementary in vitro tests and in vivo studies on bone defects. Likewise, this biomaterial was enhanced with the addition of HA, providing a scaffold with osteoconductive properties necessary for good regeneration of bone tissue. Graphical abstract.

Compositions and Structural Geometries of Scaffolds Used in the Regeneration of Cleft Palates: A Review of the Literature

Cleft palate (CP) is one of the most common birth defects, presenting a multitude of negative impacts on the health of the patient. It also leads to increased mortality at all stages of life, economic costs and psychosocial effects. The embryological development of CP has been outlined thanks to the advances made in recent years due to biomolecular successions. The etiology is broad and combines certain environmental and genetic factors. Currently, all surgical interventions work off the principle of restoring the area of the fissure and aesthetics of the patient, making use of bone substitutes. These can involve biological products, such as a demineralized bone matrix, as well as natural–synthetic polymers, and can be supplemented with nutrients or growth factors. For this reason, the following review analyzes different biomaterials in which nutrients or biomolecules have been added to improve the bioactive properties of the tissue construct to regenerate new bone, taking into account the greatest limitations of this approach, which are its use for bone substitutes for large areas exclusively and the lack of vascularity. Bone tissue engineering is a promising field, since it favors the development of porous synthetic substitutes with the ability to promote rapid and extensive vascularization within their structures for the regeneration of the CP area.

Scaffolds of bioactive glass (Bioglass®) combined with recombinant human bone morphogenetic protein -9 (rhBMP-9) for tooth extraction site preservation

Objective

The study aimed to investigate the osteogenic ability of bioactive glass (bioglass) combined with recombinant human bone morphogenetic protein-9 (rhBMP-9) on rat bone marrow mesenchymal stem cells (BMSCs) in vitro. The study also compares bone regeneration using rhBMP9 soaked with different carrier systems, including bioglass or collagen membranes (BioGide, BG) in a rat alveolar bone site preservation model in vivo.

Methods

Scanning electron microscopy was employed to analyze bioglass surface. The absorption and release potential of rhBMP9 from bioglass were researched by ELISA.

The cell viability, adhesion, proliferation, and differentiation were assessed for rhBMP9 soaked on bioglass by cck-8 kit, alkaline phosphatase (ALP) activity assay, alizarin red staining, and real-time PCR. Furthermore, prepared grafts (bioglass + BG, bioglass/rhBMP9+BG, and bioglass + BG/rhBMP9) were implanted into the maxillary right first incisor sockets of Sprague Dawley rats for 8 weeks, and new bone formation was quantified by micro-CT and histological analysis.

Results

Bioglass absorbed rhBMP9 dramatically and released it with a slow and stable speed within ten days by ELISA. When used with cck-8 kit detection, cell viability at 24 h, cell adhesion rate at 8 h, and cell proliferation at 1, 3, and 5 days were decreased in the bioglass alone group versus the control group but slightly increased with the addition of rhBMP9. Similarly, the effect of osteogenic differentiation on bioglass increased significantly when combined with rhBMP9 by upregulating the expression of ALP, mineralized matrix, and osteogenic related genes. Furthermore, both bioglass/rhBMP9+BG samples and bioglass + BG/rhBMP9 samples significantly improved several bone formation parameters compared with bioglass + BG samples. Interestingly, bioglass + BG/rhBMP9 samples demonstrated more bone regeneration in rat site preservation models.

Conclusions

Both bioglass and BG can be applied in GBR surgery as effective carriers of rhBMP9. However, BG may be more suitable than bioglass for investigating site preservation effect after tooth extraction when associated with rhBMP9 and provides a practical clinical solution to the problem of bone deficiency caused by alveolar bone atrophy.

Surface Modification of Bioactive Glass Promotes Cell Attachment and Spreading

Phosphate glasses have several advantages over traditional silicate-based bioglasses but are inferior in the crucial step of cell attachment to their surface. Here, as a proof of concept, we analyze fibroblast attachment to the phosphate glass surface subjected to basic treatment and silanization. Silicate (S53P4)- and phosphate (Sr50)-based bioactive glasses were either untreated or surface-treated with basic buffer and functionalized with silane. The surface-treated samples were studied as such and after fibronectin was adsorbed on to their surface. With both glass types, surface treatment enhanced fibroblast adhesion and spreading in comparison to the untreated glass. The surface-treated Sr50 glass allowed for cell adhesion, proliferation, and spreading to a similar extent as seen with S53P4 and borosilicate control glasses. Here, we show that surface treatment of bioactive glass can be used to attract cell adhesion factors found in the serum and promote cell-material adhesion, both important for efficient tissue integration.

Biomechanical behavior of functionally graded S53P4 bioglass-zirconia dental implants: Experimental and finite element analyses

OBJECTIVES

The aim of this work was to evaluate the biomechanical behavior of one-piece zirconia implants with a functionally graded bioglass (BG) layer as compared to monolithic zirconia and BG-coated implants, using the finite element method (FEM).

METHODS

Zirconia disks were infiltrated with bioglass S53P4 and then morphologically inspected by scanning electron microscopy (SEM) followed by mechanical analyses on micro-indentation tests for further biomechanical validation using the finite element method (FEM). On modeling, zirconia dental implants anchored into mandibular bone were simulated on occlusal loading as recorded under mastication. Three types of implants were simulated: i) free of BG coating, ii) with 100 μm or 150 μm thick conventional BG coatings; and iii) with graded BG coatings involving 3 different chemical composition distributions. The stress state at both implant and bone were evaluated using the FEM. The mechanically-induced bone remodelling was analyzed through the bone strain results.

RESULTS

Infiltration of BG into a zirconia structure resulted in a ∼100 μm thick layer with an exponential-like gradation of chemical composition and properties. Regarding the FEM calculations, the BG coating induced up to 30% decrease on stress in the implant body when compared to the monolithic zirconia implant. The gradient of chemical composition also improved the stresses' distribution. The stresses distribution towards the BG-coatings were significantly high and could lead to failure. Stresses on the bone were recorded down to its strength threshold, with insignificant influence of the coating layer. The bone strain values on all models indicates further bone remodelling although BG-coated and BG-graded zirconia implants showed the highest strain magnitude that may enhance the mechanical stimulation for bone maintenance.

SIGNIFICANCE

Graded BG-zirconia dental implants showed enhanced overall biomechanical behaviour as compared to the BG-coated or monolithic zirconia dental implants. Also, such biomechanical improvements noticed for the BG-graded system should be considered in combination with the well-known osseointegration benefits of bioactive glasses.

The shape-effect of calcium phosphate nanoparticle based films on their osteogenic properties

Calcium phosphates (CaPs) in the form of hydroxyapatite (HA) have been extensively studied in the context of bone regeneration due to their chemical similarity to natural bone mineral. While HA is known to promote osteogenic differentiation, the structural properties of the ceramic have been shown to affect the extent of this effect; several studies have suggested that nanostructured HA can improve the bioactivity. However, the role shape plays in the osteogenic potential is more elusive. Here we studied the effect of HA nanoparticle shape on the ability to induce osteogenesis in human mesenchymal stromal cells (hMSCs) by developing nanoparticle films using needle-, rice- and spherical-shaped HA. We showed that the HA films made from all three shapes of nanoparticles induced increased levels of osteogenic markers (i.e. runt-related transcription factor 2 (RUNX2), bone morphogenetic protein 2 (BMP2), alkaline phosphatase (ALP), osteopontin (OPN), osteocalcin (OCN) on protein and gene level in comparison to hMSCs cultured on cover glass slides. Furthermore, their expression levels and profiles differed significantly as a function of nanoparticle shape. We also showed that nanoparticle films were more efficient in inducing osteogenic gene expression in hMSCs compared to adding nanoparticles to hMSCs in culture media. Finally, we demonstrated that hMSC morphology upon adhesion to the HA nanoparticle films is dependent on nanoparticle shape, with hMSCs exhibiting a more spread morphology on needle-shaped nanoparticle films compared to hMSCs seeded on rice- and spherical-shaped nanoparticle films. Our data suggests that HA nanoparticle films are efficient in inducing hMSC osteogenesis in basic cell culture conditions and that nanoparticle shape plays a vital role in cell adhesion and morphology and extent of induction of osteogenic differentiation.

Biological analysis of an innovative biodegradable antibiotic eluting bioactive glass/gypsum composite bone cement for treating experimental chronic MRSA osteomyelitis

A multi-barrier antibiotics loaded biodegradable composite bone cement for resolving chronic osteomyelitis has been studied to understand the physico-mechanical properties, drug loading/eluting efficiency, and different merits and demerits prior to clinical application. After successful induction of bone infection in 28 rabbits using methicillin-resistant Staphylococcus aureus (MRSA) strains, calcium sulfate/bioactive glass based composite cement was implanted in 12 defects to assess its performance over parenteral therapy with microscopic and radiological examination for 90 days. The composite cement revealed acceptable physico-mechanical properties and controlled drug elution kinetics. Furthermore, the antibiotics concentrations in bone up to 42 days were sufficient to kill MRSA without eliciting adverse drug reactions. The striking feature of platelets aggregation by composite cement could assist bone healing. The controlled degradation with simultaneous entrapment of composite cement within the osteoid tissues and complete repair of infected cortical defects (holes) in rabbit tibia at 6 weeks indicated the excellent anti-infective and osteoconductive properties of composite cement. Thus, the animal study demonstrated the superiority of composite over injectable antibiotic therapy based on infection resolution and bone regeneration. We thereby conclude that the composite cement can be effectively applied in the treatment of resistant cases of chronic osteomyelitis.

•

Described the preparation method of multi-barrier CS/BG composite bone cement.

•

Made by coating the antibiotics loaded porous BG granules with PLGA and α-CSH.

•

Introduced antibiotics elution study in ideal immersion medium.

•

Beneficial role of PLGA on drug release and activation of platelets by cement was explored.

•

New cement showed great potential to repair bone infection and to hasten osteosynthesis.

Combinatorial effect of nano whitlockite/nano bioglass with FGF-18 in an injectable hydrogel for craniofacial bone regeneration

Comparing the bone regeneration potential of nano whitlockite or nano bioglass in combination with FGF-18, loaded in an injectable, shear-thinning chitin/PLGA hydrogel for craniofacial bone regeneration.

Remineralization of enamel subsurface lesions using toothpaste containing tricalcium phosphate and fluoride: an in vitro µCT analysis

Background

This study aimed to compare the efficacies of experimental toothpastes containing functionalized tricalcium phosphate (fTCP) with and without fluoride for in vitro enamel remineralization under pH-cycling conditions.

Methods

To create artificial white spot lesions, 36 bovine enamel specimens were immersed in a demineralization solution for 10 days. During pH-cycling for 12 days, the specimens were divided into four groups based on the experimental toothpaste type used: (a) fTCP-free, fluoride-free (fTCP − F −); (b) fTCP-containing, fluoride-free (fTCP + F −); (c) fTCP-free, fluoride-containing (fTCP − F +); and (d) fTCP-containing, fluoride-containing (fTCP + F +). Micro-focus X-ray computed tomography (μCT) scans of all specimens were obtained before demineralization, after demineralization, and after pH-cycling. The mineral density and mineral loss (ΔZ) in the enamel subsurface lesions were measured and the percentage of remineralization (%R) was calculated from ΔZ after demineralization and pH-cycling. One-way ANOVA with Tukey’s test was used for statistical analysis of the %R values. The treated enamel surface was investigated via scanning electron microscopy (SEM).

Results

The fTCP − F − group presented with the lowest amount of mineral gain after pH-cycling. In contrast, the fTCP + F + group showed the highest degree of remineralization within all lesion parts. The %R was highest in the fTCP + F + group (38.2 ± 7.8, all P < 0.01). SEM revealed the presence of small crystals on the enamel rods in the fTCP + F − and fTCP + F + groups.

Conclusions

The experimental toothpaste containing fTCP and fluoride increased remineralization of the artificial enamel subsurface lesions during pH-cycling. Furthermore, fTCP and fluoride appear to act independently on the remineralization of enamel subsurface lesions, although they coexisted in one toothpaste type.

Trial registration: This is not a human subject research.

Neutralized Dicalcium Phosphate and Hydroxyapatite Biphasic Bioceramics Promote Bone Regeneration in Critical Peri-Implant Bone Defects

The aim of this study was to evaluate the efficacy of bone regeneration in developed bioceramics composed of dicalcium phosphate and hydroxyapatite (DCP/HA). Critical bony defects were prepared in mandibles of beagles. Defects were grafted using DCP/HA or collagen-enhanced particulate biphasic calcium phosphate (TCP/HA/Col), in addition to a control group without grafting. To assess the efficacy of new bone formation, implant stability quotient (ISQ) values, serial bone labeling, and radiographic and histological percentage of marginal bone coverage (PMBC) were carefully evaluated four, eight, and 12 weeks after surgery. Statistically significant differences among the groups were observed in the histological PMBC after four weeks. The DCP/HA group consistently exhibited significantly higher ISQ values and radiographic and histological PMCB eight and 12 weeks after surgery. At 12 weeks, the histological PMBC of DCP/HA (72.25% ± 2.99%) was higher than that in the TCP/HA/Col (62.61% ± 1.52%) and control groups (30.64% ± 2.57%). After rigorously evaluating the healing of biphasic DCP/HA bioceramics with a critical size peri-implant model with serial bone labeling, we confirmed that neutralized bioceramics exhibiting optimal compression strength and biphasic properties show promising efficacy in fast bone formation and high marginal bone coverage in peri-implant bone defects.

Novel fluoride and stannous -functionalized β-tricalcium phosphate nanoparticles for the management of dental erosion

OBJECTIVE

To evaluate the anti-erosive effect of solutions containing β-tricalcium phosphate (β-TCP) nanoparticles functionalized with fluoride or with fluoride plus stannous on enamel and dentin.

METHODS

β-TCP nanoparticles were synthesized and characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Sixty enamel and dentin specimens were randomly allocated into the groups (n = 10): Control (water); F (NaF, 225 ppm F^-); F + Sn (NaF + SnCl_2, 800 ppm Sn²⁺); F+β-TCP (F+40 ppm β-TCP); F + Sn+β-TCP (F + Sn+40 ppm β-TCP); F + Sn+100β-TCP (F + Sn+100 ppm β-TCP). Specimens underwent erosion-remineralization cycling (5 min immersion into 1 % citric acid solution and 60 min exposure to artificial saliva, 4×/day, 5 days). Immersion in the test solutions was performed for 2 min, 2×/day. Surface loss (SL, in μm) was determined by optical profilometry at the end of cycling. Data were analyzed using one way-ANOVA and Tukey's tests (α = 0.05).

RESULTS

XRD confirmed the β-TCP phase. TEM micrographs showed differences between the bare nanoparticle and the β-TCP functionalized with F and Sn. All enamel groups presented lower SL than the control, with F + Sn, F + Sn+β-TCP, and F + Sn+100β-TCP showing the lowest values. For dentin, all the groups had lower SL than the control. F+β-TCP presented the lowest SL, significantly differing from all the other groups.

CONCLUSION

β-TCP nanoparticles functionalized with fluoride showed improved anti-erosive effect compared to the fluoride solution on dentin. There was no significant effect of the β-TCP nanoparticles functionalized with fluoride plus stannous in both substrates.

CLINICAL RELEVANCE

β-TCP nanoparticles are a promising agent to be added to oral health products to improve the protective effect of fluoride against dentin erosion.

Mesoporous bioactive glasses for bone healing and biomolecules delivery

Impact of bone diseases and injury is increasing at an enormous rate during the past decades due to increase in road traffic accidents and other injuries. Bioactive glasses have excellent biocompatibility and osteoconductivity that makes it suitable for bone regeneration. Researches and studies conducted on several bioactive glasses gives an insight on the need of multi-disciplinary approaches involving various scientific fields to attain its full potential. Of late, a next generation bioactive glass called as mesoporous bioactive glass (MBG) has been developed with higher specific surface area and control over mesoporous structure that presents a new material for bone regeneration. A brief discussion and overview on the potential use of MBG as a suitable material for bone tissue regeneration and biomolecule delivery is included. Additionally, possible control of the structural and functional property based on composition and fabrication techniques are also covered. According to recent researches, MBG-implant interaction with bone forming cells for cellular growth and differentiation as well as its effect on delivery of growth factor, both in vitro and in vivo, are optimistic; yet, the complete efficacy of this material is still to be explored. Hence, in this article we will review the current development and its applications for bone tissue engineering (TE).

Porous Phosphate-Based Glass Microspheres Show Biocompatibility, Tissue Infiltration, and Osteogenic Onset in an Ovine Bone Defect Model

Phosphate-based glasses (PBGs) are bioactive and fully degradable materials with tailorable degradation rates. PBGs can be produced as porous microspheres through a single-step process, using changes in their formulation and geometry to produce varying pore sizes and interconnectivity for use in a range of applications, including biomedical use. Calcium phosphate PBGs have recently been proposed as orthobiologics, based on their in vitro cytocompatibility and ion release profile. In this study, porous microspheres made of two PBG formulations either containing TiO₂ (P40Ti) or without (P40) were implanted in vivo in a large animal model of bone defect. The biocompatibility and osteogenic potential of these porous materials were assessed 13 weeks postimplantation in sheep and compared to empty defects and autologous bone grafts used as negative and positive controls. Histological analysis showed marked differences between the two formulations, as lower trabeculae-like interconnection and higher fatty bone marrow content were observed in the faster degrading P40-implanted defects, while the slower degrading P40Ti material promoted dense interconnected tissue. Autologous bone marrow concentrate (BMC) was also incorporated within the P40 and P40Ti microspheres in some defects; however, no significant differences were observed in comparison to microspheres implanted alone. Both formulations induced the formation of a collagen-enriched matrix, from 20 to 40% for P40 and P40Ti2.5 groups, suggesting commitment toward the bone lineage. With the faster degrading P40 formulation, mineralization of the tissue matrix was observed both with and without BMC. Some lymphocyte-like cells and foreign body multinucleated giant cells were observed with P40Ti2.5, suggesting that this more durable formulation might be linked to an inflammatory response. In conclusion, these first in vivo results indicate that PBG microspheres could be useful candidates for bone repair and regenerative medicine strategies and highlight the role of material degradation in the process of tissue formation and maturation.

Fabrication and characterization of porous scaffolds for bone replacements using gum tragacanth

The practice of bone implants is the standard procedure for the treatment of skeletal fissures, or to substitute and re-establish lost bone. A perfect scaffold ought to be made of biomaterials that duplicate the structure and properties of natural bone. However, the production of living tissue constructs that are architecturally, functionally and mechanically comparable to natural bone is the major challenge in the treatment and regeneration of bone tissue in orthopaedics and in dentistry. In this work, we have employed a polymeric replication method to fabricate hydroxyapatite (HAP) scaffolds using gum tragacanth (GT) as a natural binder. GT is a natural gum collected from the dried sap of several species of Middle Eastern legumes of the genus Astragalus, possessing antibacterial and wound healing properties. The synthesized porous HAP scaffolds were analyzed structurally and characterized for their phase purity and mechanical properties. The biocompatibility of the porous HAP scaffold was confirmed by seeding the scaffold with Vero cells, and its bioactivity assessed by immersing the scaffold in simulated body fluid (SBF). Our characterization data showed that the biocompatible porous HAP scaffolds were composed of highly interconnecting pores with compressive strength ranging from 0.036 MPa to 2.954 MPa, comparable to that of spongy bone. These can be prepared in a controlled manner by using an appropriate binder concentration and sintering temperature. These HAP scaffolds have properties consistent with normal bone and should be further developed for potential application in bone implants.

Decellularized Periosteum-Covered Chitosan Globule Composite for Bone Regeneration in Rabbit Femur Condyle Bone Defects

Critical-sized bone defects are incapable of self-healing and are commonly seen in clinical practice. The authors explore a new treatment for this, decellularized periosteum is applied to chitosan globules (chitosan-DP globules) as a hybrid material. The efficacy of chitosan-DP globules on rabbit femoral condyle bone defects is assessed with biocompatibility, biomechanics, and osteogenic efficiency measurements, and compared with the results of chitosan globules and empty control. No difference in cytotoxicity is observed among chitosan-DP globules, chitosan globules, and the empty control. Chitosan-DP globules possesse a better surface for cell adhesion than did chitosan globules. Chitosan-DP globules demonstrate superior efficiency for osteogenesis in the defect area compared to chitosan globules as per microcomputed tomography examination and push-out testing, with relatively minor histological differences. Both chitosan globule groups show more satisfactory results than those for the empty control. The results implicate chitosan-DP globules as a promising solution for bone defects.

Mechanical and in vitro degradation behavior of magnesium-bioactive glass composites prepared by SPS for biomedical applications

In order to make magnesium (Mg) a successful candidate for fracture fixation devices, it is imperative to control the corrosion rate and enhance its elastic modulus. In the present work, we have prepared bioactive glass (BG) reinforced magnesium composite using spark plasma sintering (SPS). Simultaneous application of heat and pressure during SPS decreased the softening point of BG (600°C), allowing it to coat the Mg particles partially. As a result, BG was found along the Mg particle boundaries, which was confirmed by elemental mapping. Addition of BG improved microhardness and elastic modulus of Mg-BG composites. Corrosion behavior was studied by hydrogen evolution and immersion corrosion in phosphate buffered saline (PBS). After 64 h of immersion, Mg-10 wt % BG composite showed highest corrosion resistance. Quantitative micro-computed tomography (micro-CT) results indicated porosity increase in Mg-BG composites during immersion. The maximum increase in porosity (1.66%) was noticed for pure Mg while the minimum for Mg-10 wt % BG composite. MG63 cell-material interactions, using extract method, showed good cytocompatibility for Mg-10 wt % BG composite. The concentration of Mg ion in cell culture media was measured using atomic absorption spectroscopy after 24 h immersion of Mg/BG composites. The results indicated that using BG as reinforcement and SPS as sintering method; we can prepare corrosion resistant and high modulus Mg-BG composites that can be used for fabricating bone fracture fixation plates. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 107B: 352-365, 2019.

Bone substitutes: a review of their characteristics, clinical use, and perspectives for large bone defects management

Bone replacement might have been practiced for centuries with various materials of natural origin, but had rarely met success until the late 19th century. Nowadays, many different bone substitutes can be used. They can be either derived from biological products such as demineralized bone matrix, platelet-rich plasma, hydroxyapatite, adjunction of growth factors (like bone morphogenetic protein) or synthetic such as calcium sulfate, tri-calcium phosphate ceramics, bioactive glasses, or polymer-based substitutes. All these substitutes are not suitable for every clinical use, and they have to be chosen selectively depending on their purpose. Thus, this review aims to highlight the principal characteristics of the most commonly used bone substitutes and to give some directions concerning their clinical use, as spine fusion, open-wedge tibial osteotomy, long bone fracture, oral and maxillofacial surgery, or periodontal treatments. However, the main limitations to bone substitutes use remain the management of large defects and the lack of vascularization in their central part, which is likely to appear following their utilization. In the field of bone tissue engineering, developing porous synthetic substitutes able to support a faster and a wider vascularization within their structure seems to be a promising way of research.

[Research and application progress of bioactive glass in bone repair]

Objective

To review the research and application progress of bioactive glass in bone repair.

Methods

The recently published literature concerning bioactive glass in bone repair was reviewed and summarized.

Results

Bioactive glass can classified different types, such as bioactive glass particulate, bioactive glass scaffold, bioactive glass coating, injectable bioactive glass cement, and bioactive glass delivery system. Bioactive glass has been well studied in the field of bone repair due to its excellent biological properties. Also, the remarkable progress has been made in various aspects.

Conclusion

Bioactive glass is a reliable material of bone repair and will play an even more important role in the future.

Regenerating bone with bioactive glass scaffolds: A review of in vivo studies in bone defect models

Large bone defects resulting from fractures and disease are a medical concern, being often unable to heal spontaneously by the body's repair mechanisms. Bone tissue engineering (BTE) is a promising approach for treating bone defects through providing a template to guide osseous regeneration. 3D scaffolds with microstructure mimicking host bone are necessary in common BTE strategies. Bioactive glasses (BGs) attract researchers' attention as BTE scaffolds as they are osteoconductive and osteoinductive in certain formulations. In vivo animal models allow understanding and evaluation of materials' performance in the complex physiological environment, being an inevitable step before clinical trials. The aim of this paper is to review for the first time published research investigating the in vivo osseous regenerative capacity of 3D BG scaffolds in bone defect animal models, to better understand and evaluate the progress and future outlook of the use of such scaffolds in BTE. The literature analysis reveals that the regenerative capacity of BG scaffolds depends on several factors; including BG composition, fabrication method, scaffold microstructure and pore characteristics, in addition to scaffold pretreatment and whether or not the scaffolds are loaded with growth factors. In addition, animal species selected, defect size and implantation time affect the scaffold in vivo behavior and outcomes. The review of the literature also makes clear the difficulty encountered to compare different types of bioactive glass scaffolds in their bone forming ability. Even considering such limitations of the current state-of-the-art, results generated from animal bone defect models provide an essential source of information to guide the design of BG scaffolds in future.

STATEMENT OF SIGNIFICANCE

Bioactive glasses are at the centre of increasing research efforts in bone tissue engineering as the number of research groups around the world carrying out research on this type of biomaterials continues to increase. However, there are no previous reviews in literature which specifically cover investigations of the performance of bioactive glass scaffolds in bone defect animal models. This is the topic of the present review, in which we have analysed comprehensively all available literature in the field. The review thus fills a gap in the biomaterials literature providing a broad platform of information for researchers interested in bioactive glasses in general and specifically in the outcomes of in vivo models. Bioactive glass scaffolds of different compositions tested in relevant bone defect models are covered.

Clinical Application of Ceramics in Anterior Cervical Discectomy and Fusion: A Review and Update

STUDY DESIGN

Narrative review.

OBJECTIVES

Anterior cervical discectomy and fusion (ACDF) is a reliable procedure, commonly used for cervical degenerative disc disease. For interbody fusions, autograft was the gold standard for decades; however, limited availability and donor site morbidities have led to a constant search for new materials. Clinically, it has been shown that calcium phosphate ceramics, including hydroxyapatite (HA) and tricalcium phosphate (TCP), are effective as osteoconductive materials and bone grafts. In this review, we present the current findings regarding the use of ceramics in ACDF.

METHODS

A review of the relevant literature examining the clinical use of ceramics in anterior cervical discectomy and fusion procedures was conducted using PubMed, OVID and Cochrane.

RESULT

HA, coralline HA, sandwiched HA, TCP, and biphasic calcium phosphate ceramics were used in combination with osteoinductive materials such as bone marrow aspirate and various cages composed of poly-ether-ether-ketone (PEEK), fiber carbon, and titanium. Stand-alone ceramic spacers have been associated with fracture and cracks. Metallic cages such as titanium endure the risk of subsidence and migration. PEEK cages in combination with ceramics were shown to be a suitable substitute for autograft.

CONCLUSION

None of the discussed options has demonstrated clear superiority over others, although direct comparisons are often difficult due to discrepancies in data collection and study methodologies. Future randomized clinical trials are warranted before definitive conclusions can be drawn.

Clinical Outcome of Hydroxyapatite Coated, Bioactive Glass Coated, and Machined Ti6Al4V Threaded Dental Implant in Human Jaws: A Short-Term Comparative Study

INTRODUCTION

Growing aspect of endosseous implant research is focused on surface modification of dental implants for the purpose of improving osseointegration. The aim of this study was to evaluate and compare the clinical outcome (ie, osseointegration) of hydroxyapatite coated, bioactive glass coated and machined titanium alloy threaded dental implants in human jaw bone after implantation.

MATERIALS AND METHODS

One hundred twenty-six implants (45 hydroxyapatite coated, 41 bioactive glass coated, and 40 machined titanium implants) have been placed in incisor areas of 62 adult patients. Outcome was assessed up to 12 months after prosthetic rehabilitation using different clinical and radiological parameters. Surface roughness of failed implants was analyzed by laser profilometer.

DISCUSSION

Hydroxyapatite and bioactive glass coating materials were nontoxic and biocompatible. Least marginal bone loss in radiograph, significantly higher (P < 0.05) interface radiodensity, and less interfacial gaps were observed in computed tomography with bioactive glass coated implants at anterior maxilla compared to other 2 types.

CONCLUSION

Bioactive glass coated implants are equally safe and effective as hydroxyapatite coated and machined titanium implants in achieving osseointegration; therefore, can be effectively used as an alternative coating material for dental implants.

Bioactive-glass in periodontal surgery and implant dentistry

Bioactive-glass (B-G) is a material known for its favorable biological response when in contact with surrounding fibro-osseous tissues, due not only to an osteoconductive property, but also to an osteostimulatory capacity, and superior biocompatibility for use in human body. The objectives of this paper are to review recent studies on B-G in periodontal and implant therapy, describing its basic properties and mechanism of activity as well as discoursing about state of art and future perspective of utilization. From a demonstrated clinical benefit as bone graft for the elimination of osseous defects due to periodontal disease (intrabony/furcation defects) and surgeries (alveolar ridge preservation, maxillary sinus augmentation), to a potential use for manufacturing bioactive dental implants, possibly allowing wider case selection criteria together with improved integration rates even in the more challenging osteoporotic and medically compromised patients, this biomaterial represents an important field of study with high academic, clinical and industrial importance.

Bioactive calcium phosphate-based glasses and ceramics and their biomedical applications: A review

An overview of the formation of calcium phosphate under in vitro environment on the surface of a range of bioactive materials (e.g. from silicate, borate, and phosphate glasses, glass-ceramics, bioceramics to metals) based on recent literature is presented in this review. The mechanism of bone-like calcium phosphate (i.e. hydroxyapatite) formation and the test protocols that are either already in use or currently being investigated for the evaluation of the bioactivity of biomaterials are discussed. This review also highlights the effect of chemical composition and surface charge of materials, types of medium (e.g. simulated body fluid, phosphate-buffered saline and cell culture medium) and test parameters on their bioactivity performance. Finally, a brief summary of the biomedical applications of these newly formed calcium phosphate (either in the form of amorphous or apatite) is presented.

Solution Combustion Synthesis of Nanoscale Materials

Solution combustion is an exciting phenomenon, which involves propagation of self-sustained exothermic reactions along an aqueous or sol-gel media. This process allows for the synthesis of a variety of nanoscale materials, including oxides, metals, alloys, and sulfides. This Review focuses on the analysis of new approaches and results in the field of solution combustion synthesis (SCS) obtained during recent years. Thermodynamics and kinetics of reactive solutions used in different chemical routes are considered, and the role of process parameters is discussed, emphasizing the chemical mechanisms that are responsible for rapid self-sustained combustion reactions. The basic principles for controlling the composition, structure, and nanostructure of SCS products, and routes to regulate the size and morphology of the nanoscale materials are also reviewed. Recently developed systems that lead to the formation of novel materials and unique structures (e.g., thin films and two-dimensional crystals) with unusual properties are outlined. To demonstrate the versatility of the approach, several application categories of SCS produced materials, such as for energy conversion and storage, optical devices, catalysts, and various important nanoceramics (e.g., bio-, electro-, magnetic), are discussed.

Insights on the properties of levofloxacin-adsorbed Sr- and Mg-doped calcium phosphate powders

Several types of biodegradable materials have been investigated for the treatment of osteomyelitis. Calcium phosphate (CaP) ceramics are among the most performing materials due to their resemblance to human hard tissues in terms of mineralogical composition, and proven ability to adsorb and deliver a number of drugs. This research work was intended to study the suitability of modified CaP powders loaded with a fluoroquinolone as drug delivery systems for osteomyelitis treatment. Levofloxacin (LEV) was chosen due to the well-recognized anti-staphylococcal activity and adequate penetration into osteoarticular tissues. Substituted CaP powders (5 mol% Sr(2+) or 5 mol% Mg(2+)) were synthesised through aqueous precipitation. The obtained powders were characterised by X-ray diffraction, SEM and FTIR analysis. The X-ray diffraction patterns confirmed the presence of HA and β-tricalcium phosphates (β-TCP) phases in doped compositions, especially in the case of Mg-doped system. The fixation of LEV at the surface of the particles occurred only by physisorption. Both the in vitro microbiological susceptibility, against Staphylococcus spp, and biocompatibility of LEV-loaded CaP powders have not been compromised.

New method of synthesis and in vitro studies of a porous biomaterial

Biomaterials for bone reconstruction represent a widely studied area. In this paper, a new method of synthesis of a porous glass-ceramic obtained by thermal treatment is presented. The prepared biomaterial was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and induced couple plasma-optical emission spectroscopy (ICP-OES), mercury porosimetry and by the Archimedes method. In vitro evaluations in a simulated body fluid (SBF) and in contact with SaOS2 human osteoblasts were also carried out. The porous glass-ceramic is composed of a total porous network of 60% suitable for body fluid and cell infiltration, with pore sizes varying from 60 nm to 143 μm. The presence of two crystalline phases decreases the kinetic of bioactivity compared to an amorphous biomaterial (bioactive glass). A hydroxyapatite layer appears from 15 days of immersion on the surface and inside the pores, showing a biodegradation and a bioactivity in four steps. Cytotoxicity assessments present an increase of the cellular viability after 72 h proving the non-cytotoxic effect of the glass-ceramic. Thus, the results of these different studies indicate that the porous biomaterial may have a potential application for the bone regeneration. This paper also presents the novelty of this method. It is a rapid synthesis which combines simplicity and low cost. This represents an advantage for an eventual industrialization.

Biodegradable Materials for Bone Repair and Tissue Engineering Applications

This review discusses and summarizes the recent developments and advances in the use of biodegradable materials for bone repair purposes. The choice between using degradable and non-degradable devices for orthopedic and maxillofacial applications must be carefully weighed. Traditional biodegradable devices for osteosynthesis have been successful in low or mild load bearing applications. However, continuing research and recent developments in the field of material science has resulted in development of biomaterials with improved strength and mechanical properties. For this purpose, biodegradable materials, including polymers, ceramics and magnesium alloys have attracted much attention for osteologic repair and applications. The next generation of biodegradable materials would benefit from recent knowledge gained regarding cell material interactions, with better control of interfacing between the material and the surrounding bone tissue. The next generations of biodegradable materials for bone repair and regeneration applications require better control of interfacing between the material and the surrounding bone tissue. Also, the mechanical properties and degradation/resorption profiles of these materials require further improvement to broaden their use and achieve better clinical results.

Functional role of inorganic trace elements in angiogenesis-Part II: Cr, Si, Zn, Cu, and S

Trace elements play critical roles in angiogenesis events. The effects of nitrogen, iron, selenium, phosphorus, gold, and calcium were discussed in part I. In part II, we evaluated the effect of chromium, silicon, zinc, copper, and sulfur on different aspects of angiogenesis, with critical roles in healing and regeneration processes, and undeniable roles in tumor growth and cancer therapy. This review is the second of series that serves as an overview of the role of inorganic elements in regulation of angiogenesis and vascular function. The methods of exposure, structure, mechanism, and potential activity of these trace elements are briefly discussed. An electronic search was performed on the role of these trace elements in angiogenesis from January 2005 to April 2014. The recent aspects of the relationship between five different trace elements and their role in regulation of angiogenesis, and homeostasis of pro- and anti-angiogenic factors were assessed. Many studies have investigated the effects and importance of these elements in angiogenesis events. Both stimulatory and inhibitory effects on angiogenesis are observed for the evaluated elements. Chromium can promote angiogenesis in pathological manners. Silicon as silica nanoparticles is anti-angiogenic, while in calcium silicate extracts and bioactive silicate glasses promote angiogenesis. Zinc is an anti-angiogenic agent acting on important genes and growth factors. Copper and sulfur compositions have pro-angiogenic functions by activating pro-angiogenic growth factors and promoting endothelial cells migration, growth, and tube formation. Thus, utilization of these elements may provide a unique opportunity to modulate angiogenesis under various setting.

Three-dimensional printing of drug-eluting implants: preparation of an antimicrobial polylactide feedstock material

The aim of the present work was to investigate the potential of three-dimensional (3D) printing as a manufacturing method for products intended for personalized treatments by exploring the production of novel polylactide-based feedstock materials for 3D printing purposes. Nitrofurantoin (NF) and hydroxyapatite (HA) were successfully mixed and extruded with up to 30% drug load with and without addition of 5% HA in polylactide strands, which were subsequently 3D-printed into model disc geometries (10 × 2 mm). X-ray powder diffraction analysis showed that NF maintained its anhydrate solid form during the processing. Release of NF from the disks was dependent on the drug loading in a concentration-dependent manner as a higher level of released drug was observed from disks with higher drug loads. Disks with 30% drug loading were able to prevent surface-associated and planktonic growth of Staphylococcus aureus over a period of 7 days. At 10% drug loading, the disks did not inhibit planktonic growth, but still inhibited surface-associated growth. Elemental analysis indicated the presence of microdomains of solid drug supporting the observed slow and partial drug release. This work demonstrates the potential of custom-made, drug-loaded feedstock materials for 3D printing of pharmaceutical products for controlled release.