Fabrication of porous, drug-releasing, biodegradable, polymer scaffolds for sustained drug release

Applications of Electrospun Drug-Eluting Nanofibers in Wound Healing: Current and Future Perspectives

Wounds are a consequence of disruption in the structure, integrity, or function of the skin or tissue. Once a wound is formed following mechanical or chemical damage, the process of wound healing is initiated, which involves a series of chemical signaling and cellular mechanisms that lead to regeneration and/or repair. Disruption in the healing process may result in complications; therefore, interventions to accelerate wound healing are essential. In addition to mechanical support provided by sutures and traditional wound dressings, therapeutic agents play a major role in accelerating wound healing. The medicines known to improve the rate and extent of wound healing include antibacterial, anti-inflammatory, and proliferation enhancing agents. Nonetheless, the development of these agents into eluting nanofibers presents the possibility of fabricating wound dressings and sutures that provide mechanical support with the added advantage of local delivery of therapeutic agents to the site of injury. Herein, the process of wound healing, complications of wound healing, and current practices in wound healing acceleration are highlighted. Furthermore, the potential role of drug-eluting nanofibers in wound management is discussed, and lastly, the economic implications of wounds as well as future perspectives in applying fiber electrospinning in the design of wound dressings and sutures are considered and reported.

Computational analysis of cartilage implants based on an interpenetrated polymer network for tissue repairing

Interpenetrated polymer networks (IPNs), composed by two independent polymeric networks that spatially interpenetrate, are considered as valuable systems to control permeability and mechanical properties of hydrogels for biomedical applications. Specifically, poly(ethyl acrylate) (PEA)-poly(2-hydroxyethyl acrylate) (PHEA) IPNs have been explored as good hydrogels for mimicking articular cartilage. These lattices are proposed as matrix implants in cartilage damaged areas to avoid the discontinuity in flow uptake preventing its deterioration. The permeability of these implants is a key parameter that influences their success, by affecting oxygen and nutrient transport and removing cellular waste products to healthy cartilage. Experimental try-and-error approaches are mostly used to optimize the composition of such structures. However, computational simulation may offer a more exhaustive tool to test and screen out biomaterials mimicking cartilage, avoiding expensive and time-consuming experimental tests. An accurate and efficient prediction of material's permeability and internal directionality and magnitude of the fluid flow could be highly useful when optimizing biomaterials design processes. Here we present a 3D computational model based on Sussman-Bathe hyperelastic material behaviour. A fluid structure analysis is performed with ADINA software, considering these materials as two phases composites where the solid part is saturated by the fluid. The model is able to simulate the behaviour of three non-biodegradable hydrogel compositions, where percentages of PEA and PHEA are varied. Specifically, the aim of this study is (i) to verify the validity of the Sussman-Bathe material model to simulate the response of the PEA-PHEA biomaterials; (ii) to predict the fluid flux and the permeability of the proposed IPN hydrogels and (iii) to study the material domains where the passage of nutrients and cellular waste products is reduced leading to an inadequate flux distribution in healthy cartilage tissue. The obtained results show how the model predicts the permeability of the PEA-PHEA hydrogels and simulates the internal behaviour of the samples and shows the distribution and quantification of fluid flux.

Platelet-rich plasma-loaded chitosan scaffolds: preparation and growth factor release kinetics

The aim of this study is to compare the effects of different platelet-rich plasma (PRP) preparation methods on platelet activity and to investigate the growth factor (GF) release kinetics from PRP-loaded chitosan scaffolds for tissue engineering applications. Flow cytometry analysis showed that centrifugation processes used for PRP preparation did not cause significant effect on platelet activation levels by means of markers investigated. Two different methods were used to prepare PRP-loaded chitosan scaffolds: (i) PRP was added to chitosan gel before freeze-drying to prepare scaffolds called as "GEL" and (ii) PRP was embedded to freeze-dried chitosan scaffolds to prepare scaffolds called as "SPONGE." In addition, nonactivated PRP and PRP activated with type-I collagen were used as control groups. Scanning electron microscopy images demonstrated that, in GEL group, there is no deterioration on the scaffolds porous, 3D, and interconnected structure. GF release kinetics was determined by enzyme-linked immunosorbent assay for platelet-derived GF-BB, transforming GF-β1, and insulin-like GF-1. A sustained release of GFs was achieved in GEL group while a sharp burst release was observed for all the GFs from the SPONGE groups. Moreover, platelet-derived GF-BB, insulin-like GF-1, and transforming GF-β1 releases were prolonged to 20 days in GEL groups, and the biological activities of all GFs released from GEL and SPONGE scaffolds were preserved. This study demonstrated that chitosan scaffold that was called GEL could be an appropriate carrier for PRP applications by providing sustained release of GFs.

A porous 3D cell culture micro device for cell migration study

Cell migration under chemoattractant is an important biological step in cancer metastasis that causes the spread of malignant tumor cells. Porous polymeric materials are widely used to mimic the extracellular matrix (ECM) environment for applications such as three dimensional (3D) cell culturing and tissue engineering. In this paper we report a novel 3D cell culture device based on porous polymeric material to study cancer migration. We fabricated a porous channel on a polymeric chip using a selective ultrasonic foaming method. We demonstrate that a chemical concentration gradient could be established through the porous channel due to the slow diffusion process. We show that significant cell migration could be observed through the porous channel within 1-2 weeks of cell culturing when metastatic M4A4-GFP breast cancer cells were induced by 20% fetal bovine serum (FBS).We also developed a mathematical model to evaluate the diffusivity and concentration gradient through the fabricated porous structure.

Development of braided drug-loaded nanofiber sutures

The objectives of this work are twofold. Firstly, while most work on electrospinning is limited to the development of only functional materials, a structural application of electrospun nanofibers is explored. Secondly, a drug-loaded tissue suture is fabricated and its various properties are characterized. Braided drug-loaded nanofiber sutures are obtained by combining an electrospinning process with a braiding technique followed by a coating procedure. Two different electrospinning techniques, i.e. blend and coaxial electrospinning, to incorporate a model drug cefotaxime sodium (CFX-Na) into poly(L-lactic acid) (PLLA) nanofibers have been applied and compared with each other. Properties of the braided drug-loaded sutures are characterized through a variety of methods including SEM, TEM and tensile testing. The results show that the nanofibers had a preferable micromorphology. The drug was incorporated into the polymer nanofibers homogeneously, with no cross-linking. The nanofibers maintained their fibrous structures. An in vitro release study indicates that the drug-loaded nanofibers fabricated by blend electrospinning and coaxial electrospinning had a different drug release behavior. An inhibition zone experiment shows that both sutures obtained from the nanofibers of the different electrospinning techniques had favorable antibacterial properties. The drug-loaded sutures had preferable histological compatibility performance compared with commercial silk sutures in an in vivo comparative study.

Indentation creep reservoirs for drug-eluting poly(L-lactic acid) scaffolds

The indentation creep behavior of poly(L-lactic acid) (PLLA) thin and thick films was examined. The creep rate was found to be strongly dependent on applied stress, as well as on the thickness of the PLLA film with creep rates being much larger in thin films compared to thick ones at lower stresses, but the difference was minimal at high stresses. The indentation creep approach was used to create a drug-delivery device with multiple reservoirs. Managing the thickness of the diffusion barrier that was a low-molecular-weight PLLA controlled the rate of drug release and it is shown that transport of drug through the barrier is diffusion controlled and the rate of dissolution of the PLLA is slower than the rate of transport of drug. A stable release rate together with periodic pulsed release was achieved over a period of 28 days with complete transport of the drug achieved over this time frame.