Use of chitosan membrane associated with polypropylene mesh to prevent peritoneal adhesion in rats

Chitosan thread in the healing of the cecal wall of rabbits (Oryctolagus cuniculus) submitted to cecorrhaphy

The development and evaluation of synthesis materials are crucial to reducing the morbidity and magnitude of post-enterorrhaphy surgical complications. Despite the possibility of production, chitosan thread has not yet been used in enterorrhaphy, and its effects on intestinal healing have not been evaluated. Therefore, this study aimed to evaluate the effects of chitosan thread on the intestinal wall repair of rabbits submitted to cecorrhaphy. For this, 42 rabbits were allocated into two groups with 21 animals. One group was submitted to cecorrhaphy with chitosan suture thread (CG) and the other with poliglecaprone suture thread (PG). The occurrence of postoperative complications, the intensity of edema, cellular response, formation of granulation tissue, as well as the deposition and maturation of collagen fibers, and the intensity of vascular endothelial growth factor (VEGF-α) expression, were evaluated during the intestinal wall repair process. The evaluations occurred on the 5th, 15th, and 25th postoperative (PO) days. The animals did not develop peritonitis, but adherence was observed in six animals from CG and seven from PG, with no difference between groups. The polymorphonuclear infiltrate showed higher intensity and higher amount of type III collagen fibers in CG on the 15th PO day. In contrast, a lower amount of type I collagen fibers was observed in CG samples on the 25th PO day. Therefore, the chitosan thread used for cecorrhaphy in rabbits results in minimal postoperative complications, presents biocompatibility, and bioactively assists the tissue repair process of the cecal wall, inducing minimal tissue reaction, stimulating the deposition of type III collagen fibers in the proliferative phase, with sustained VEGF-α expression, but with reduced deposition of type I fibers, indicating a delay in collagen maturation.

Applications of Chitosan in Surgical and Post-Surgical Materials

The continuous advances in surgical procedures require continuous research regarding materials with surgical applications. Biopolymers are widely studied since they usually provide a biocompatible, biodegradable, and non-toxic material. Among them, chitosan is a promising material for the development of formulations and devices with surgical applications due to its intrinsic bacteriostatic, fungistatic, hemostatic, and analgesic properties. A wide range of products has been manufactured with this polymer, including scaffolds, sponges, hydrogels, meshes, membranes, sutures, fibers, and nanoparticles. The growing interest of researchers in the use of chitosan-based materials for tissue regeneration is obvious due to extensive research in the application of chitosan for the regeneration of bone, nervous tissue, cartilage, and soft tissues. Chitosan can serve as a substance for the administration of cell-growth promoters, as well as a support for cellular growth. Another interesting application of chitosan is hemostasis control, with remarkable results in studies comparing the use of chitosan-based dressings with traditional cotton gauzes. In addition, chitosan-based or chitosan-coated surgical materials provide the formulation with antimicrobial activity that has been highly appreciated not only in dressings but also for surgical sutures or meshes.

Exploring the match between the degradation of the ECM-based composites and tissue remodeling in a full-thickness abdominal wall defect model

The repair of abdominal wall defects is currently a clinical challenge. A naturally derived extracellular matrix (ECM) such as small intestine submucosa (SIS) has received great attention in abdominal wall defect repair because of its remarkable bioactivity, biodegradability and tissue regeneration. The match between material degradation and tissue remodeling is very important for the realization of ideal repair effectiveness. In this study, a near-infrared (NIR) fluorescent dye Cy5.5 NHS ester was used to label ECM-based (ECMB) composites consisting of SIS and chitosan/elastin electrospun nanofibers for monitoring material degradation. The tissue remodeling in the ECMB composites for a full-thickness abdominal wall defect repair was systematically investigated by a series of tests including wall thickness measurement, muscle regeneration analysis and angiogenesis assessment. The main findings were: (1) real-time and noninvasive degradation monitoring of the ECMB composites until complete degradation could be realized by chemical conjugation with a Cy5.5 NHS ester. (2) In a full-thickness abdominal wall defect model, the explant thickness could be used as an intuitional indicator for evaluating the tissue remodeling efficiency in the ECMB composites, and the accuracy of this indicator was verified by various examinations including collagen deposition, angiogenesis, and muscle regeneration. The present study could provide new insight into evaluating tissue repair effectiveness of the ECMB composites.

Evaluation of In Vivo Adhesion Properties of New Generation Polyglactin, Oxidized Regenerated Cellulose and Chitosan-Based Meshes for Hernia Surgery

Introduction

Composite meshes coated with anti-adhesive barriers have been developed by taking advantage of the robustness of polypropylene meshes for use in hernia repair. We aimed to evaluate the effects of composite meshes containing polyglactin, polycaprolactone, oxidized regenerated cellulose and chitosan on the adhesion formation.

Methods

Forty-two Sprague Dawley male rats were divided into six groups of seven rats according to the content of the meshes used. A defect was created on the right abdominal wall of the rats and an oval composite mesh of 2 cm in diameter was placed over the defect and fixed. The rats were sacrificed under anesthesia on the 7th postoperative day. Macroscopic and histopathological examination was performed and the incorporation of the mesh with the abdominal wall and the presence of intraabdominal adhesions were evaluated.

Results

When the macroscopic findings of the rats were evaluated, there was a statistically significant difference between the rat groups in terms of the distribution of peritoneal adhesion scores (p<0.05). There was no statistically significant difference between the rat groups in terms of the distribution of inflammation, fibrosis and macrophage levels (p>0.05).

Conclusion

It was evaluated that the development of intraabdominal adhesion and the strength of adhesion decreased when biocompatible adhesion barriers with anti-adhesive properties such as oxidized regenerated cellulose and chitosan were used in the structure of composite meshes used in hernia repair. Hemostatic and antibacterial properties of these substances are promising to create the ideal mesh.

Nanodiamond-chitosan functionalized hernia mesh for biocompatibility and antimicrobial activity

Polypropylene (PP) mesh is most commonly used for the treatment of hernia and pelvic floor construction. However, some of the patients have a few complications after surgery due to the rejection or infection of the implanted meshes. The poor biocompatibility of PP mesh, low wettability results in poor cell attachment/proliferation and restricts the loading of antibacterial agent, leading to a slow healing process and high risk of infection after surgery. Here in this study, a new technique has been employed to develop a novel antimicrobial and biocompatible PP mesh modified with bioactive chitosan and functionalized nanodiamond (FND) for infection inhibition and acceleration of the healing process. An oxygen plasma treatment PP mesh was used then chitosan was strongly attached to the surface of the PP fibers. Subsequently, FND as an antibacterial agent was loaded into the chitosan modified PP fiber to provide desired antibacterial functions. The meshes were characterised with XRD, FTIR, SEM, EDX, water contact angle, confocal, and optical microscopy. The modified PP mesh with chitosan and FND showed a significant increase in its hydrophilicity and L929 fibroblast cell attachment. Furthermore, the modified mesh exhibited great antibacterial efficiency against Escherichia coli. Therefore, the newly developed technique to modify PP mesh could be a promising technique to generate a biocompatible PP mesh to accelerate the healing process and reduce the risk of infection after surgery.

Bilaminar Chitosan Scaffold for Sellar Floor Repair in Transsphenoidal Surgery

Background

Endoscopic endonasal transsphenoidal surgery (EETS) is a standard technique used to approach sellar tumors. It is relatively safe, minimally invasive and carries a low risk of complications. However, one of the common complications reported with this technique is CSF leakage which causes morbidity, an increase in recovery time and hospital costs. This complication usually occurs from violation of the diaphragma sellae and a defect in the structures of the sellar floor or incomplete repair. In this article we report the first case with the use of a novel bilaminar chitosan scaffold which can be potentially used in the repair of the sellar floor, primarily aiming to the bony part of this structure.

Case Presentation

After a personalized design employing a tissue engineering strategy, we reconstructed the sellar floor in a 65-year-old woman who had undergone EETS for a pituitary adenoma with progressive bilateral visual loss. To repair the bony defect of the sellar floor, we used a novel bilaminar chitosan scaffold. The patient had an unremarkable postoperative course with no evidence of CSF leak. The polymer was well tolerated without toxicity, infection or complications. After 2 years of follow up the patient remains neurologically intact, and in good endocrinological status.

Conclusion

This is the first report of the use of this biomaterial and its biocompatibility in a clinical setting for the repair of the sellar floor during EETS. Our experience with chitosan bilaminar scaffold and in several preclinical studies in the literature have demonstrated good biocompatibility and effective bioengineered bone regeneration due to its excellent osteoconductive properties, this study pretends to be one landmark for further clinical research and larger case series with the use of this personalized tissue engineering materials in order to see they real efficacy to increase the surgeon armamentarium.

Polypropylene meshes coated with chitosan/polyethylene glycol for the reconstruction of the abdominal wall: an experimental study in rats

ABSTRACT The aim of this study was to characterize the tissue reactions triggered by the polypropylene mesh coated with chitosan and polyethylene glycol film, and if it’s able to prevent the formation of peritoneal adhesions. Defects in the abdominal wall of rats were induced and polypropylene meshes coated with chitosan/polyethylene glycol (CPEG group, n= 12) and uncoated (PP control group, n= 12) were implanted. On the fourth and forty-fifth postoperative day the formation of adhesion and the tissue reaction to the biomaterial was evaluated through histological and histochemical analysis. The area (P= 0.01) and severity (P= 0.002) of the adhesion was significatively less in the CPEG group. On the fourth day the foreign body reaction was less intense in CPEG group (P= 0.018) and the production of collagen fibers was more intense in this group (P= 0.041). The tissue reactions caused by the biomaterials were similar on the 45th day, with the exception of the high organization of collagen fibers in the CPEG group. The CPEG meshes did not fully prevent the formation of adhesions, but minimized the severity of the process. The foreign body reaction promoted by polypropylene meshes coated with CPEG is less intense than that triggered by uncoated polypropylene meshes.

A randomized controlled experimental study comparing chitosan coated polypropylene mesh and Proceed™ mesh for abdominal wall defect closure

BACKGROUND

Abdominal wall defects and hernias are commonly repaired with synthetic or biological materials. Adhesions and recurrences are a common problem. A study was conducted to compare Chitosan coated polypropylene mesh and a polypropylene-polydioxanone composite with oxidized cellulose coating mesh (Proceed™) in repair of abdominal wall defect in a Rabbit hernia model.

METHODS

A randomized controlled experimental study was done on twelve New Zealand white rabbits. A ventral abdominal defect was created in each of the rabbits. The rabbits were divided into two groups. In one group the defect was repaired with Chitosan coated polypropylene mesh and Proceed mesh™ in the other. The rabbits were operated in two phases. They were followed up at four weeks and twelve weeks respectively after which the rabbits were sacrificed. They were evaluated by open exploration and histopathological examination. Their efficacy in reducing adhesion and ability of remodeling and tissue integration were studied.

RESULTS

There was no statistical significance in the area of adhesion, the force required to remove the adhesions, tissue integration and remodeling between Chitosan and Proceed™ group. Histological analysis revealed that the inflammatory response, fibrosis, material degradation and remodeling were similar in both the groups. There were no hernias, wound infection or dehiscence in any of the studied animals.

CONCLUSION

Chitosan coated polypropylene mesh was found to have similar efficacy to Proceed™ mesh. Chitosan coated polypropylene mesh, can act as an anti adhesive barrier when used in the repair of incisional hernias and abdominal wall defects.

Comparative studies of thermogels in preventing post-operative adhesions and corresponding mechanisms

Thermogelling PLGA–PEG–PLGA, PCGA–PEG–PCGA, and PCL–PEG–PCL triblock copolymers and their efficacies of prevention of post-surgical peritoneal adhesions in rabbits were investigated and compared.

Effects of chitosan coatings on polypropylene mesh for implantation in a rat abdominal wall model

Hernia repair and pelvic floor reconstruction are usually accompanied with the implantation of a surgical mesh, which frequently results in a foreign body response with associated complications. An ideal surgical mesh that allows force generation of muscle tissues without significant granulation tissue and/or fibrosis is of significant clinical interest. The objective of the present study was to evaluate the in vitro and in vivo responses of a chitosan coating on polypropylene mesh (Ch-PPM) in comparison with commercially available meshes. We found that application of a 0.5% (w/v) Ch-PPM elicited preferential attachment of myoblasts over fibroblast attachment in vitro. Therefore, we test the hypothesis that 0.5% Ch-PPM will encourage skeletal muscle tissue ingrowth and decrease fibrosis formation in vivo. We implanted 0.5% Ch-PPM, collagen-coated polypropylene mesh (Pelvitex™; C.R. Bard), and polypropylene (Avaulta Solo(®); C.R. Bard) alone using a rat abdominal defect model. Force generation capacity and inflammatory response of each mesh were evaluated 2, 4, and 12 weeks postimplantation. We found that chitosan coating is associated with the restoration of functional skeletal muscle with histomorphologic characteristics that resemble native muscle and an early macrophage phenotypic response that has previously been shown to lead to more functional outcomes.

Bending of layer-by-layer films driven by an external magnetic field

We report on optimized architectures containing layer-by-layer (LbL) films of natural rubber latex (NRL), carboxymethyl-chitosan (CMC) and magnetite (Fe₃O₄) nanoparticles (MNPs) deposited on flexible substrates, which could be easily bent by an external magnetic field. The mechanical response depended on the number of deposited layers and was explained semi-quantitatively with a fully atomistic model, where the LbL film was represented as superposing layers of hexagonal graphene-like atomic arrangements deposited on a stiffer substrate. The bending with no direct current or voltage being applied to a supramolecular structure containing biocompatible and antimicrobial materials represents a proof-of-principle experiment that is promising for tissue engineering applications in biomedicine.

A comparative study of the preventive effects of mitomycin C and chitosan on intraarticular adhesion after knee surgery in rabbits

We sought to compare the preventive effects of mitomycin-C(MMC) and chitosan on intraarticular adhesion after knee surgery in rabbits. For this purpose, 48 New-Zealand rabbits were randomly and equally divided into MMC, chitosan, and control groups. Approximately 10 × 10 mm(2) of the cortical bone was removed from both sides of left femoral condyle and the cancellous bone underneath was exposed. The decorticated areas were topically treated with MMC and chitosan while control group was treated with physiological saline. The lower left limb was fixed in flexed position with Kirschner-wire for 4 weeks postoperatively. After 4 weeks, gross and histopathological examination, biochemical analysis, and fibroblast counts were performed on knee intraarticular adhesion in each group. The data show mild membrane-like fibrous intraarticular adhesion, presented in loose, in MMC group. There was moderate intraarticular adhesion in chitosan group while in controls; there was large-size compact fibrous tissue adhesion. Hydroxyproline contents and fibroblast quantity of MMC and chitosan groups were lower (P < 0.05) than that of control group. We, therefore, concluded that MMC and chitosan could prevent intraarticular adhesion of the knee in rabbits by inhibiting fibroblast proliferation and reducing collagenous fiber formation while MMC had a better preventive effect than that of chitosan.

Biodegradable and thermoreversible PCLA-PEG-PCLA hydrogel as a barrier for prevention of post-operative adhesion

Biodegradable polymers can serve as barriers to prevent the post-operative intestinal adhesion. Herein, we synthesized a biodegradable triblock copolymer poly(ɛ-caprolactone-co-lactide)-b-poly(ethylene glycol)-b-poly(ɛ-caprolactone-co-lactide) (PCLA-PEG-PCLA). The concentrated polymeric aqueous solution was injectable, and a hydrogel could be rapidly formed due to percolation of a self-assembled micelle network at the body temperature without requirement of any chemical reactions. This physical hydrogel retained its integrity in vivo for a bit more than 6 weeks and was eventually degraded due to hydrolysis. The synthesized polymer exhibited little cytotoxicity and hemolysis; the acute inflammatory response after implanting the hydrogel was acceptable, and the degradation products were less acidic than those of other polyester-containing materials. A rabbit model of sidewall defect-bowel abrasion was employed, and a significant reduction of post-operative peritoneal adhesion has been found in the group of in situ formed PCLA-PEG-PCLA hydrogels.