Effect of dental tissue conditioners and matrix metalloproteinase inhibitors on type I collagen microstructure analyzed by Fourier transform infrared spectroscopy

Matrix metalloproteinases in dentin: Assessing their presence, activity, and inhibitors - a review of current trends

INTRODUCTION

Dentin integrity is a critical aspect of tooth structure, with matrix metalloproteinases (MMPs) playing a crucial role in dentinogenesis, caries formation, and dental bonding. It is crucial to accurately assess MMP activity to understand dentin pathophysiology and develop effective clinical strategies.

OBJECTIVES

The study aimed to conduct a thorough review and comprehensive summary of diverse techniques employed in assessing MMPs in dentin.

DATA AND SOURCES

To conduct the research, electronic databases were systematically searched and manual citation searches were performed. A total of 621 articles were identified. After eliminating duplicates and irrelevant studies, 70 articles were included in the review. 25 articles with overlapping methodologies were also excluded.

STUDY SELECTION

The selection criteria were based on the relevance of the studies to MMPs and MMP inhibitors in dentin without regard to the study design. Only peer-reviewed articles published in English were included. The search was restricted to studies published until November 2022.

CONCLUSION

The comprehensive analysis of various studies has yielded 37 techniques for evaluating MMPs and MMP inhibitors, which hold significant promise in creating diagnostic markers and devising targeted therapeutic interventions.

Longitudinal bond strength of a universal adhesive and chemical dentin characterization under different acid etching protocols

OBJECTIVE

This study aimed to analyze the longitudinal bond strength of a universal adhesive and chemically characterize the dentin substrate under different acid etching protocols.

METHODOLOGY

Dentin samples were etched with polyacrylic acid 25% (PAA) for 10 seconds (n=3) and phosphoric acid 32% (PA) for 15 seconds (n=3) and analyzed by Fourier transform infrared spectroscopy - attenuated total reflectance (FTIR-ATR) before and after treatment. For collagen degradation, samples (n=12) were divided into 3 groups: PAA, PA, and Deionized water (control), and analyzed by the quantity of solubilized type I collagen C-terminal cross-linked telopeptides and solubilized C-terminal peptide in relation to total protein concentration (ICTPtp and CTXtp) and by their ultimate tensile strength (UTS). For the adhesive interface analysis, dentin samples (n=72) were divided into 3 groups: PAA, PA, and Self-etch (SE), and subdivided into 2 groups: 24 h (baseline) and 1 year. The following tests were performed: microtensile bond strength (μTBS) (n=48), scanning electron microscopy (SEM) (n=12), and nanoleakage (n=12).

RESULTS

The FTIR of PAA showed lower reduction of the peaks in the phosphate group when compared to PA. For ICTPtp, PA showed a significantly higher value. For CTXtp, PA and PAA groups failed to statically differ from each other. UTS was significantly lower for PA. For μTBS, storage time significantly affected bond strength. The results were unaffected by the etching protocol. For SEM, after 1 year, PA had little evidence of degradation in the upper third of the adhesive interface in comparison to the other groups. Nanoleakage showed no considerable silver impregnation after 1 year in the SE group.

CONCLUSION

The use of PAA prior to a universal adhesive (when compared to PA) represents a less aggressive type of etching to dentin. However, self-etching still seems to be the best option for universal adhesive systems that have functional monomers in their composition.

Comparison of DNA preservation and ATR-FTIR spectroscopy indices of cortical and trabecular bone of metacarpals and metatarsals

Shape, size, composition, and function of the bones in the human body vary on the macro, micro and nanoscale. This can influence changes caused by taphonomy and post-mortem preservation, including DNA. Highly mineralised compact bone is less susceptible to taphonomic factors than porous trabecular bone. Some studies imply that DNA can be better preserved in trabecular bone, due to remnants of the soft tissue or bacteria better digesting organic matter while not digesting DNA. The aim of this study was to understand the differences between compact (diaphyses) and trabecular (epiphyses) bone on a molecular level and thus the reasons for the better preservation of the DNA in the trabecular bone. The powder obtained from epiphyses and diaphyses of metacarpals and metatarsals was analysed using ATR-FTIR spectroscopy and compared. Samples with poorest DNA preservation originated from diaphyses, predominantly of metatarsals. They were characterised by higher concentrations of phosphates and crystallinity, while lower collagen quality in comparison to samples with the best DNA preservation. Epiphyses presented higher concentrations of better-preserved collagen while diaphyses had higher concentrations of carbonates and phosphates and higher crystallinity. Due to better-preserved collagen in the epiphyses, the soft tissue remnants hypothesis seems more likely than the bacteria hypothesis.

Final irrigation protocols can be used to promote stable long-term bond strength of AH Plus to dentin

Irrigation solutions might affect dentin surface characteristics and, consequently, endodontic sealers adhesion. This study analyzed the effect of different final irrigation protocols on push-out bond strength (BS) of AH Plus to dentin seven days and 20 months after obturation. Scanning electron micrographs were obtained from the dentin surface of one sample/group after final irrigation. Canals of bovine incisors were instrumented and received final irrigation with (n=21): G1 - 2.5% sodium hypochlorite (NaOCl) + distilled water; G2 - 2.5% NaOCl + 17% EDTA; G3 - 2.5% NaOCl + 17% EDTA + 2.5% NaOCl; G4 - 2.5% NaOCl + 17% EDTA + 2% chlorhexidine (CHX); G5 - mixture 5% NaOCl + 18% etidronate (HEDP); and G6 - mixture 5% NaOCl + 10% tetrasodium EDTA (Na4EDTA). After irrigation, one root/group was split and images were obtained by scanning electron microscopy (SEM). The other 20 roots/group were filled with only AH Plus sealer. Three slices/root were used for push-out assessment seven days and 20 months after obturation. One-way analysis of variance and Tukey (α<0.05) were used to compare the results among experimental groups, and unpaired t-test (α<0.05) was used to compare the results of the same group over time. The photomicrographs showed that, excepting G1, all groups completely removed the smear layer from the samples. In G2 and G4, the opening of the dentin tubules enlarged. In G3, erosion was observed in the peritubular and intertubular dentin. Values of the BS in the seven days were G2=G3=G4=G5>G6=G1 and in the 20 months were G3=G5>G6=G4>G1=G2. G3, G5, and G6 presented values of BS in 20 months similar to the values of seven days (P>0.05). The final irrigation protocols tested produced dentin surfaces with different characteristics. Only G3 and G5 presented high BS values that were stable over time.

Collagen stabilization by natural cross-linkers: A qualitative and quantitative FTIR study on ultra-thin dentin collagen model

Due to its low tolerance to external factors such as enzymes, dentin collagen often requires stabilization, which can be achieved through cross-linking. In this study, qualitative and quantitative Fourier transform infrared (FTIR) analyses were used to assess dentin collagen stabilization effects of three structurally-different flavonoids -A-type linkage proanthocyanidins (A-PA), B-type linkage proanthocyanidins (B-PA), and epigallocatechin gallate (EGCG), all from natural extracts. Particularly, transmission FTIR spectroscopy was used for the first time to quantitatively assess the biodegradation of fresh ultra-thin (10 µm) dentin collagen films caused by collagenase digestion. Two traditional analytical methods, namely the hydroxyproline assay and weight loss analysis, were also used for comparison purposes. The results from all three methods showed consistently that A-PA and B-PA provide better collagen stabilization than EGCG at concentrations of 0.65% and 1.3% (p<0.01). FTIR is demonstrated to be a valuable and reliable analytical tool for qualitative and quantitative evaluation of ultra-thin collagen films.

Enhancing resin-dentin bond durability using a novel mussel-inspired monomer

Numerous approaches have been developed to improve the resin-dentin bond performance, among which the bio-application of mussel-derived compounds have drawn great attention recently. To assess the performance of N-(3,4-dihydroxyphenethyl)methacrylamide (DMA), a mussel-derived compound, as a functional monomer in dental adhesive, its potential property to cross-link with dentin collagen and polymerize with adhesive will first be evaluated by transmission electron microscopy (TEM), attenuated total reflectance technique of Fourier transform infrared (ATR-FTIR), and atomic force microscopy (AFM) via Peakforce QNM mode. After validating the influence of DMA on collagen and adhesive separately, the overall performance of DMA/ethanol solution as a primer in dentin bonding was examined using micro-tensile bond strength (μTBS) testing, fracture pattern observation, and nanoleakage evaluation both immediately and after 10,000 times thermocycling aging. The inhibitory effect of DMA on endogenous metalloproteinases (MMPs) was evaluated by in situ zymography using confocal laser scanning microscopy (CLSM) and the cytotoxicity of DMA was evaluated using cell counting kit-8. Results demonstrated that DMA successfully cross-linked with dentin collagen via non-covalent bonds and had no influence on the polymerization and mechanical properties of the adhesive. Furthermore, even after 10,000 times thermocycling aging, the μTBS and nanoleakage expression of the DMA-treated groups showed no significant change compared with their immediate values. In situ zymography revealed reduced endogenous proteolytic activities after the application of DMA, and no cytotoxicity effect was observed for DMA concentration up to 25 ​μmol/L. Thus, DMA could be used as a novel, biocompatible functional monomer in dentin bonding.

•

DMA acts as a functional monomer in dentin bonding system with high biocompatibility.

•

DMA connects the adhesive and collagen network to resist various external attacks.

•

DMA/ethanol inhibits the activity of MMPs and improve resin-dentin bond durability.

Influence of Dentin Priming with Tannin-Rich Plant Extracts on the Longevity of Bonded Composite Restorations

Objective

This in vitro study evaluated the influence of bioactive plant extracts as dentin biomodifying agents to improve the longevity of bonded restorations. For that, plant extracts were applied to the dentin surface prior to the adhesive system.

Materials and Methods

Bovine incisors were ground flat to obtain 2 mm thick slices in which conical preparations were made (N = 10). Tannin-containing plant extracts were applied to dentin before the application of the restorative system, as follows: control group (untreated, CTL), chlorhexidine 0.12% (CHX), mastruz (Dysphania ambrosioides, MTZ), cat's claw (Uncaria tomentosa, CTC), guarana (Paullinia cupana, GUA), galla chinensis (Rhus chinensis, GCH), and tannic acid (extracted from Acacia decurrens, TNA). The push-out bond strength test was conducted (0.5 mm/min). Dentin biomodification was assessed by the modulus of elasticity and mass change in bovine tooth sections (0.5 × 1.7 × 7.0 mm). The dentin staining after extract treatments of dentin slices was compared. The dentin surface wettability was also evaluated by means of the contact angles of the adhesive system with the dentin surface and compared with the untreated control group. Data were subjected to ANOVA/Tukey's test (α = 0.05).

Results

The bond strength of the restoratives to dentin was not significantly improved by the plant extracts, irrespective of the evaluation time (p > 0.05). Except for TNA, the elastic modulus of demineralized dentin significantly reduced after treatment with the plant extracts (p < 0.05). The dentin staining correlated with the tannin content of the extracts. The contact angle was significantly reduced when treated with CTC, GCH, and TNA.

Conclusions

The tannin-containing extracts had a questionable effect on the longevity of bonded restorations. The dentin modulus was negatively affected by the extract treatments. Although some of the extracts changed the contact angle, which seems to improve the adhesive monomer permeation, the tannin-rich plant extract application prior to adhesive application was proven to be clinically unfeasible due to dentin staining.

Effects of heat in the properties of NaOCl alone and mixed with etidronate and alkaline tetrasodium EDTA

AIM

To assess the free available chlorine concentration (FAC), organic tissue dissolution and smear layer removal capacity of sodium hypochlorite (NaOCl) alone and when mixtured with etidronate (HEDP) and tetrasodium EDTA (Na₄ EDTA), and heated to different temperatures.

METHODOLOGY

Mixtures at 1 : 1 ratio of 5% NaOCl with distilled water (considered NaOCl alone), 18% HEDP or 10% Na₄ EDTA were heated to 25 °C, 37 °C, 48 °C and 60 °C. The FAC in the mixtures was assessed at 5, 10, 20, 30, 60 and 120 min. Samples of bovine muscle tissue (n = 10) were prepared with similar size and weighed before and after 5, 10 and 15 min of immersion in the mixtures heated to the different temperatures to verify organic matter dissolution. The intergroup results were compared statistically using one-way analysis of variance (anova) and intragroup by two-way analysis of variance (anova), both followed by Tukey's multiple-comparison test (α < 0.01). Bovine dentine blocks (n = 10) were analysed by scanning electron microscopy before and after immersion in the mixtures, and the time taken to remove the smear layer from the surfaces of the samples was determined. The Friedman test was used to compare the scores of the same group (α < 0.01), and the Kruskal-Wallis test with Dunn's post hoc was used to compare the different groups (α < 0.01). Saline solution was used as a control in the experiments of tissue dissolution and smear layer removal, RESULTS: Heating NaOCl alone did not affect its FAC. The higher the temperature of the mixtures with the chelators, the lower the FAC. Organic tissue dissolution was improved by increases in temperature of NaOCl alone and its mixture with HEDP (P < 0.01); however, the mixture with Na₄ EDTA had no improvement (P > 0.01). Smear layer removal by NaOCl alone was enhanced by heating resulting in lower scores in some samples and became more rapid in the mixtures with the chelators. The saline solution did not promote tissue dissolution nor smear layer removal (P > 0.01).

CONCLUSION

In this laboratory study, heating NaOCl alone or when mixed with HEDP improved its capacity to dissolve organic matter and remove the smear layer. However, the mixture with HEDP required frequent refreshment to retain these effects when heated. Due to the acceleration in the reaction between the irrigants, very rapid reductions in the free available chlorine in the mixtures with Na₄ EDTA heated to the different temperatures occurred.

The Comparative Study of the State of Conservation of Two Medieval Documents on Parchment from Different Historical Periods

The paper explores the potentiality of an experimental multianalytic protocol with appropriate methodology for determining the chemical and morphostructural characteristics of two old documents on parchment support. Such a protocol can authenticate and assess the state of conservation under the influence of environmental factors during storage and archival documentation, thus advancing preventive and prophylactic measures in “treasure” deposits such as the National Archives of Romania, where these documents are kept. The work methodology consisted of three stages. The first stage consists of visual observation for identifying deteriorations and degradations, alongside the selection of representatives’ areas from where micro-samples were collected. The second stage involves Scanning Electron Microscopy coupled by Energy Dispersive X-ray Spectrometry (SEM-EDX) analysis, for highlighting the morphology and determining the elemental composition; lastly, the Fourier-transform infrared (FTIR) analysis and correlation of results establish the chemical and morphostructural changes. The use of this gradual system of analyses allowed determining the differences between these two documents in terms of the materials used for producing them, their manufacturing technologies, the writing and ornamentation, and the overall state of conservation. The results provided the first accurate picture of the chemical nature and manufacturing of the two parchment documents by determining the main characteristics of the collagen and of the finishing, writing, and decoration materials, in view of the natural aging through the oxidative and gelatinization processes of the collagen. The SEM-EDX results revealed the morphological changes of the parchment that occurred at various levels in the collagen fibrous mesh and established the state of conservation of the support, writing, and decorations.

Effect of different solutions in reversing the damage caused by radiotherapy in dentin structure

Background

Previous studies have shown that radiotherapy of the head and neck region can cause direct changes in dental structure. This study evaluated the effect of different solutions on the dentin chemical composition and collagen structure of irradiated dentin.

Material and Methods

Sixty maxillary canines were distributed in 2 groups (n=30): non-irradiated and irradiated (radiotherapy: X-rays of 6 MV in 30 cycles of 2 Gy to 60 Gy). The teeth were sectioned, sanded, and polished to obtain 3x3x2 mm fragments, which were redistributed in 3 subgroups (n=10) according to the treatment employed: chlorhexidine 2% (CL), chitosan 0.2% (QT), and 0.5 M carbodiimide (EDC). The samples were analyzed in FTIR at time zero (T0-control) and after 1 (T1), 3 (T3), and 5 (T5) minutes of immersion in the tested solutions. The data for the areas of the carbonate (C), amide I (AI) bands, and the ratio between the areas of the amide III/proline and hydroxyproline (AIII/PH) bands were analyzed using ANOVA and Tukey test (α=5%).

Results

QT showed lower C values at T1, T3, and T5 (P<0.0001), presenting lower values when compared to CL and EDC subgroups (P<0.05). AI values at T3 and T5 were higher than T0-control and T1, independently of the radiotherapy and dentin treatment factors (P<0.05). At T0-control, the AIII/PH ratio was lower in the irradiated group (P<0.05), whereas the EDC treatment at T1, T3, and T5 and QT at T3 and T5 increased these values (P<0.05), making them similar to non-irradiated subgroups (P>0.05).

Conclusions

Radiotherapy changes the secondary structure of collagen, and EDC was able to restore collagen integrity after 1 minute of immersion, without changing dentin inorganic composition.

Key words:Radiotherapy, collagen, dentin, FTIR, chemical composition.

The effects of photodynamic therapy with blue light and papain-based gel associated with Urucum, on collagen and fibroblasts: a spectroscopic and cytotoxicity analysis

Papacarie Duo™ is clinically used and has proven effectiveness; however, it is necessary to improve its antimicrobial action. The combined treatment of Papacarie Duo™ with Urucum (Bixa Orellana) could create a potential tool for dental caries treatment; its extract obtained from the seeds' pericarp contains a water-soluble primary pigment (cis-bixin) with smaller amounts of other carotenoids. The dicarboxylic acid salts of cis-norbixin and trans-norbixin occur in heated alkaline solutions. To analyze the absorption spectra and cytotoxicity (with human dermal fibroblasts) in different concentrations of Urucum, associated or not with Papacarie Duo™, we performed this in vitro study. The effects of pure Urucum, Papacarie Duo™, and PapaUrucum™ on the microstructure of collagen were also analyzed. The application of papain-based gel with Urucum did not present cytotoxicity, its exhibit UV absorption spectrum peak around 460 ± 20 nm. Also, it showed that the compound used did not alter the chemical structure of collagen. Consequently, this product could be used as a chemomechanical method to remove dentin caries as well as being a potential product for antimicrobial photodynamic therapy (aPDT) application.

Rapid Evaluation Methods for Quality of Trout (Oncorhynchus mykiss) Fresh Fillet Preserved in an Active Edible Coating

In this study different methods were used to evaluate the effectiveness of a carrageenan coating and carrageenan coating incorporating lemon essential oil (ELO) in preserving the physicochemical and olfactory characteristics of trout fillets stored at 4 °C up to 12 days. The fillet morphological structure was analyzed by histological and immunological methods; lipid peroxidation was performed with the peroxide and thiobarbituric acid reactive substances (TBARS) tests. At the same time, two less time-consuming methods, such as Attenuated Total Reflectance-Fourier Transformed Infrared (ATR-FTIR) spectroscopy and the electronic nose, were used. Uncoated trout fillets (UTF) showed a less compact tissue structure than carrageenan-coated threads (CTF) and coated fillets of carrageenan (active) ELO (ACTF), probably due to the degradation of collagen, as indicated by optical microscopy and ATR-FTIR. UTF showed greater lipid oxidation compared to CTF and ACTF, as indicated by the peroxide and TBARS tests and ATR-FTIR spectroscopy. The carrageenan coating containing ELO preserved the olfactory characteristics of the trout fillets better than the carrageenan coating alone, as indicated by the electronic nose analysis. This study confirms that both carrageenan and ELO containing carrageenan coatings slow down the decay of the physicochemical and olfactory characteristics of fresh trout fillets stored at 4 °C, although the latter is more effective.

A collagen telopeptide binding peptide shows potential in aiding collagen bundle formation and fibril orientation

A double-armed CTBP-PEG-CTBP derivative of a collagen telopeptide binding peptide (CTBP), shows potential in aiding collagen bundle formation and fibril orientation by interacting with fibrils.

Tissue dissolution and modifications in dentin composition by different sodium hypochlorite concentrations

OBJECTIVES

To determine the organic matter dissolution and changes in dentin chemical composition promoted by different concentrations of NaOCl over time.

MATERIAL AND METHODS

Fragments of bovine muscle tissue were weighed before and after 5, 10, and 15 min of immersion in the groups (n=10): G1- 0.9% saline solution; G2- 1% NaOCl; G3- 2.5% NaOCl; and G4- 5% NaOCl. Bovine dentin fragments were subjected to the same irrigants and absorption spectra were collected by Attenuated Total Reflectance of Fourier Transform Infrared Spectroscopy (ATR-FTIR) before and after 0,5, 1, 2, 3, 5, 8, and 10 min of immersion in the solutions. The ratios of the amide III/phosphate and carbonate/phosphate absorption bands were determined. The tissue dissolution and carbonate/phosphate ratios were submitted to the two-way analysis of variance (ANOVA) with Tukey's multiple-comparison test (α<0.05) and to the one-way analysis of variance with Tukey's (α<0.05). The amide III/phosphate ratio was analyzed by Friedman test (α<0.05) and the Kruskal-Wallis test with Dunn's post-hoc (α<0.05).

RESULTS

The increase in NaOCl concentration and contact time intensified the dissolution of organic matter and dentin collagen with reduction in the amide III/phosphate ratio. Significant differences between all groups (p<0.05) were observed in the dissolution of organic matter at 10 min and in the amide III/phosphate ratio between the saline solution and 5% NaOCl at 5 min. The carbonate/phosphate ratio decreased significantly in G2, G3, and G4 after 0,5 min of immersion (p<0.05), but more alterations did not occur in the subsequent periods (p>0.05). Intergroup differences were not observed in this ratio (p>0.05).

CONCLUSIONS

The increase in the exposure time and in the concentration of NaOCl solution lead to an increase in the tissue dissolution and dentin collagen deproteination. Furthermore, some carbonate ions are removed from the dentin inorganic phase by the NaOCl.

Novel Raman Spectroscopic Biomarkers Indicate That Postyield Damage Denatures Bone's Collagen

Raman spectroscopy has become a powerful tool in the assessment of bone quality. However, the use of Raman spectroscopy to assess collagen quality in bone is less established than mineral quality. Because postyield mechanical properties of bone are mostly determined by collagen rather than the mineral phase, it is essential to identify new spectroscopic biomarkers that help infer the status of collagen quality. Amide I and amide III bands are uniquely useful for collagen conformational analysis. Thus, the first aim of this work was to identify the regions of amide bands that are sensitive to thermally induced denaturation. Collagen sheets and bone were thermally denatured to identify spectral measures that change significantly following denaturation. The second aim was to assess whether mechanical damage denatures the collagen phase of bone, as reflected by the molecular spectroscopic biomarkers identified in the first aim. The third aim was to assess the correlation between these new spectroscopic biomarkers and postyield mechanical properties of cortical bone. Our results revealed five peaks whose intensities were sensitive to thermal and mechanical denaturation: ∼1245, ∼1270, and ∼1320 cm(-1) in the amide III band, and ∼1640 and ∼1670 cm(-1) in the amide I band. Four peak intensity ratios derived from these peaks were found to be sensitive to denaturation: 1670/1640, 1320/1454, 1245/1270, and 1245/1454. Among these four spectral biomarkers, only 1670/1640 displayed significant correlation with all postyield mechanical properties. The overall results showed that these peak intensity ratios can be used as novel spectroscopic biomarkers to assess collagen quality and integrity. The changes in these ratios with denaturation may reflect alterations in the collagen secondary structure, specifically a transition from ordered to less-ordered structure. The overall results clearly demonstrate that this new spectral information, specifically the ratio of 1670/1640, can be used to understand the involvement of collagen quality in the fragility of bone. © 2015 American Society for Bone and Mineral Research.

HPLC detection of loss rate and cell migration of HUVECs in a proanthocyanidin cross-linked recombinant human collagen-peptide (RHC)-chitosan scaffold

Porous scaffolds with appropriate pore structure, biocompatibility, mechanical property and processability play an important role in tissue engineering. In this paper, we fabricated a recombinant human collagen-peptide (RHC)-chitosan scaffold cross-linked by premixing 30% proanthocyanidin (PA) in one-step freeze-drying. To remove the residual acetic acid, optimized 0.2M phosphate buffer of pH6.24 with 30% ethanol (PBSE) was selected to neutralize the lyophilized scaffold followed by three times deionized water rinse. Ninhydrin assay was used to characterize the components loss during the fabrication process. To detect the exact RHC loss under optimized neutralization condition, high performance liquid chromatography (HPLC) equipped size exclusion chromatography column was used and the total RHC loss rate through PBSE rinse was 19.5±5.08%. Fourier transform infrared spectroscopy (FT-IR) indicated hydrogen bonding among RHC, chitosan and PA, it also presented a probative but not strong hydrophobic interaction between phenyl rings of polyphenols and pyrrolidine rings of proline in RHC. Further, human umbilical vein endothelial cell (HUVEC) viability analyzed by a scanning electron microscope (SEM) and acridine orange/ethidium bromide (AO/EB) fluorescence staining exhibited that this scaffold could not only promote cell proliferation on scaffold surface but also permit cells migration into the scaffold. qRT-PCR exhibited that the optimized scaffold could stimulate angiogenesis associated genes VEGF and CD31 expression. These characterizations indicated that this scaffold can be considered as an ideal candidate for tissue engineering.

Effect of papain-based gel on type I collagen--spectroscopy applied for microstructural analysis

Considering the improvement of biomaterials that facilitate atraumatic restorative techniques in dentistry, a papain-based gel can be used in the chemomechanical removal of decayed dental tissue. However, there is no information regarding the influence of this gel on the structure of sound collagen. The aim of the present study was to investigate the adsorption of a papain-based gel (Papacarie^TM) to collagen and determine collagen integrity after treatment. A pilot study was first performed with 10 samples of type I collagen membrane obtained from bovine Achilles deep tendon to compare the influence of hydration (Milli-Q water) on infrared bands of collagen. In a further experiment, 10 samples of type I collagen membrane were used to evaluate the effects of Papacarie^TM on the collagen microstructure. All analyses were performed using the attenuated total reflectance technique of Fourier transform infrared (ATR-FTIR). The results demonstrated that the application of Papacarie^TM does not lead to the degradation of collagen and this product can be safely used in minimally invasive dentistry. As the integrity of sound collagen is preserved after the application of the papain-based gel, this product is indicated for the selective removal of infected dentin, leaving the affected dentin intact and capable of re-mineralization.

Comparison of two proanthocyanidin cross-linked recombinant human collagen-peptide (RHC) - chitosan scaffolds

Cross-linking plays an important role in tissue engineering, which involves the alternative of cross-linker and the way of components interaction. We compared two proanthocyanidin (PA) cross-linked recombinant human collagen-peptide - chitosan scaffolds: immerse cross-linking (I-CLS) and premix cross-linking (P-CLS). Both of the scaffolds presented homogeneous pore structure with mean pore size of 110-115 μm. The swelling ratio was decreased to 29.6 in I-CLS, but increased to 37.1 in P-CLS while porosity of the two scaffolds was reduced about 8% comparing to 94.3% before cross-linking. The cross-linked scaffolds exhibited enhanced resistance to enzyme degradation and improved compressive modulus (I-CLS > P-CLS). The scaffolds transformed from elastic region to plastic region until the strain reached 60%, and the stress was 40.5, 133.2 and 84.1 kPa of uncross-linking scaffold, I-CLS and P-CLS individually. Thermal stability indicated molecular bonding between PA and the scaffold components, simultaneously, Fourier transform infrared spectroscopy mainly presented hydrogen bonding between the protein amide carbonyl and the phenolic hydroxyl with a particular transform due to pyrrolidine rings of proline in P-CLS. Both of the I-CLS and P-CLS could promote human umbilical vein endothelial cells attachment and proliferation. The characterization suggested in situ biodegradable application of P-CLS, while a potential long-term utilization of I-CLS in tissue engineering.

Hydroxyapatite and collagen combination-coated dental implants display better bone formation in the peri-implant area than the same combination plus bone morphogenetic protein-2-coated implants, hydroxyapatite only coated implants, and uncoated implants

PURPOSE

The objective of this study was to compare peri-implant bone formation among uncoated (UC), hydroxyapatite (HA), collagen plus HA (CH), and collagen, HA, plus bone morphogenetic protein-2 (BMP-2) implant groups.

MATERIALS AND METHODS

Implants in the UC group had acid-etched surfaces. The surface coating was applied using the aerosol deposition method. The coated surfaces were examined by scanning electron microscopy, x-ray diffraction (XRD), and Fourier-transformed infrared absorption analysis. Subsequently, 6 implants from each group (total, 24 implants) were installed in the tibias of rabbits. The animals were sacrificed at 6 weeks after implant installation. Peri-implant bone formation and bone-to-implant contact (BIC) were measured in histologic sections. Significant differences among groups were evaluated using analysis of variance.

RESULTS

Based on the measured XRD patterns, there was a characteristic HA phase (International Centre for Diffraction Data [ICDD], 086-0740) coated on the titanium (ICDD, 089-3725). Subsequent coating processes for collagen and BMP-2 did not display additional diffraction peaks, but maintained the diffraction patterns of the HA-coated titanium. The presence of collagen was verified by infrared absorption analysis. When comparing these modifications with UC surfaces, only the CH coating displayed significantly greater peri-implant bone formation and BIC (P = .003 and P < .001, respectively). Adding BMP-2 to the implant surface did not produce any advantage compared with the CH coating.

CONCLUSIONS

In this study, the CH group displayed significantly greater new bone formation and BIC than the other groups. There was no significant difference among the other groups.

Impact of Protease Inhibitors on Dentin Matrix Degradation by Collagenase

This proof-of-concept study assessed whether the reduction of the degradation of the demineralized organic matrix (DOM) by pre-treatment with protease inhibitors (PI) is effective against dentin matrix loss. Bovine dentin slices were demineralized with 0.87 M citric acid, pH 2.3, for 36 hrs. In sequence, specimens were treated or not (UT, untreated) for 1 min with gels containing epigallocatechin 3-gallate (EGCG, 400 µM), chlorhexidine (CHX, 0.012%), FeSO4 (1 mM), NaF (1.23%), or no active compound (P, placebo). Specimens were then stored in artificial saliva (5 days, 37°C) with the addition of collagenase ( Clostridium histolyticum, 100 U/mL). We analyzed collagen degradation by assaying hydroxyproline (HYP) in the incubation solutions (n = 5) and evaluated the dentin matrix loss by profilometry (n = 12). Data were analyzed by ANOVA and Tukey’s test (p < 0.05). Treatment with gels containing EGCG, CHX, or FeSO4 led to significantly lower HYP concentrations in solution and dentin matrix loss when compared with the other treatments. These results strongly suggest that the preventive effects of the PI tested against dentin erosion are due to their ability to reduce the degradation of the DOM.