Feasibility of a nanomaterial-tissue patch for vascular and cardiac reconstruction

Nanomaterials for small diameter vascular grafts: overview and outlook

Small-diameter vascular grafts (SDVGs) cannot meet current clinical demands owing to their suboptimal long-term patency rate. Various materials have been employed to address this issue, including nanomaterials (NMs), which have demonstrated exceptional capabilities and promising application potentials. In this review, the utilization of NMs in different forms, including nanoparticles, nanofibers, and nanofilms, in the SDVG field is discussed, and future perspectives for the development of NM-loading SDVGs are highlighted. It is expected that this review will provide helpful information to scholars in the innovative interdiscipline of cardiovascular disease treatment and NM.

Application of Nanomaterials in Stem Cell-Based Therapeutics for Cardiac Repair and Regeneration

Cardiovascular disease is a leading cause of disability and death worldwide. Although the survival rate of patients with heart diseases can be improved with contemporary pharmacological treatments and surgical procedures, none of these therapies provide a significant improvement in cardiac repair and regeneration. Stem cell-based therapies are a promising approach for functional recovery of damaged myocardium. However, the available stem cells are difficult to differentiate into cardiomyocytes, which result in the extremely low transplantation efficiency. Nanomaterials are widely used to regulate the myocardial differentiation of stem cells, and play a very important role in cardiac tissue engineering. This study discusses the current status and limitations of stem cells and cell-derived exosomes/micro RNAs based cardiac therapy, describes the cardiac repair mechanism of nanomaterials, summarizes the recent advances in nanomaterials used in cardiac repair and regeneration, and evaluates the advantages and disadvantages of the relevant nanomaterials. Besides discussing the potential clinical applications of nanomaterials in cardiac therapy, the perspectives and challenges of nanomaterials used in stem cell-based cardiac repair and regeneration are also considered. Finally, new research directions in this field are proposed, and future research trends are highlighted.

A Biocompatible 4D Printing Shape Memory Polymer as Emerging Strategy for Fabrication of Deployable Medical Devices

The rapid development of 4D printing provides a potential strategy for the fabrication of deployable medical devices (DMD). The minimally invasive surgery to implant the DMD into the body is critical, 4D printing DMD allows the well-defined device to be implanted with a high-compacted shape and transformed into their designed shape to meet the requirement. Herein, a 4D printing tissue engineering material is developed with excellent biocompatibility and shape memory effect based on the photocrosslinked polycaprolactone (PCL). The fast thiol-acrylate click reaction is applied for photocrosslinking of the acrylates capped star polymer (s-PCL-MA) with poly-thiols, that enable the 3D printing for the DMD fabrication. The cell viability, erythrocyte hemolysis, and platelet adhesion results indicate the excellent biocompatibility of the 4D printing polymer, especially the biological subcutaneous implantation results confirm the promote tissue growth and good histocompatibility. A 4D printing stent with deformable shape and recovery at a temperature close to human body temperature demonstrated the potential application as DMD. In addition, the everolimus is loaded to the polymer (ps1-PCL) through host-guest coordination with β-cyclodextrin as the core of the star polymer, which shows sustained drug release and improved body's inflammatory response.

Sodium triphosphate–capped silver nanoparticles on a decellularized scaffold-based polyurethane vascular patch for bacterial infection inhibition and rapid endothelialization

With increasing incidence rate of cardiovascular diseases and implant-related infections, there is growing demand for vascular patches that can promote endothelialization and resist bacterial infection. In this work, we immobilized sodium triphosphate–capped silver nanoparticles onto a polyurethane film to obtain a composite film and evaluated its in vitro biocompatibility. Subsequently, we anchored sodium triphosphate–capped silver nanoparticles onto a polyurethane-coated decellularized scaffold to prepare a vascular patch and investigated its in vivo performance in a mouse model. The prepared vascular patch demonstrated excellent biocompatibility and potent antibacterial activity against Escherichia coli and Staphylococcus aureus. It still maintained the surgical artery patency at 30 days after implantation. At the same time, the endothelialization at the surgical site was achieved, showing its ability to facilitate endothelialization. Therefore, it may be a promising candidate for combating bacterial infection and treating diseased blood vessels.

Angioplasty Using 4-Hexylresorcinol-Incorporated Silk Vascular Patch in Rat Carotid Defect Model

The aim of this study was to evaluate and compare the efficacy of 4-hexylresorcinol (4-HR)-incorporated silk as a vascular patch scaffold to that of the commercial polytetrafluoroethylene (PTFE) vascular patch (GORE® ACUSEAL). The expression of the vascular endothelial cell growth factor-A (VEGF-A) after application of 4-HR was studied in RAW264.7 and HUVEC cells. In the animal study, a carotid artery defect was modeled in Sprague Dawley rats (n = 30). The defect was directly closed in the control group (n = 10), or repaired with the PTFE or 4-HR silk patch in the experimental groups (n = 10 per group). Following patch angioplasty, angiography was performed and the peak systolic velocity (PSV) was measured to evaluate the artery patency. The application of 4-HR was shown to increase the expression of VEGF-A in RAW264.7 and HUVEC cells. The successful artery patency rate was 80% for the 4-HR silk group, 30% for the PTFE group, and 60% for the control group. The PSV of the 4-HR silk group was significantly different from that of the control group at one week and three weeks post-angioplasty (p = 0.005 and 0.024). Histological examination revealed new regeneration of the arterial wall, and that the arterial diameter was well maintained in the 4-HR silk group in the absence of an immune reaction. In contrast, an overgrowth of endothelium was observed in the PTFE group. In this study, the 4-HR silk patch was successfully used as a vascular patch, and achieved a higher vessel patency rate and lower PSV than the PTFE patch.

Incorporation of nanoparticles into transplantable decellularized matrices: Applications and challenges

Decellularization of tissues can significantly improve regenerative medicine and tissue engineering by producing natural, less immunogenic, three-dimensional, acellular matrices with high biological activity for transplantation. Decellularized matrices retain specific critical components of native tissues such as stem cell niche, various growth factors, and the ability to regenerate in vivo. However, recellularization and functionalization of these matrices remain limited, highlighting the need to improve the characteristics of decellularized matrices. Incorporating nanoparticles into decellularized tissues can overcome these limitations because nanoparticles possess unique properties such as multifunctionality and can modify the surface of decellularized matrices with additional growth factors, which can be loaded onto the nanoparticles. Therefore, in this minireview, we highlight the various approaches used to improve decellularized matrices with incorporation of nanoparticles and the challenges present in these applications.

Decellularized Amniotic Membrane Scaffold as a Pericardial Substitute: An In Vivo Study

BACKGROUND

In the development of new biomaterials for pericardium substitute, acellular amniotic membrane (AAM) presents potential for new applications in regenerative medicine. We studied an AAM as a pericardial substitute to achieve a suitable, cost effective, abundant matrix for the purpose of using it as graft for tissue repair.

METHODS

Twenty Wistar rats were randomly divided into 2 groups (n = 10/group) and had their pericardiums excised. In the experimental group, the excised pericardium segment was substituted by a 7-mm-diameter patch of decellularized AAM sutured to the lesion area. After 4 weeks, the heart's outer layer of both groups was evaluated. The structure and component characteristics of the scaffold were determined with the use of hematoxylin and eosi, Alizarin Red S, and immumohistochemical staining and scanning electron microscopy.

RESULTS

Histopathologic examination of the AAM patches revealed that the integrity of the AAM was preserved, and no calcification was observed on the surface of the myocardium. We also observed thicker pericardium repair tissue in the AAM group compared with the control group. AAM patches, by virtue of their low immunogenicity, evoked minimal host-versus-graft reaction.

CONCLUSIONS

We conclude that AAM appears to be an ideal substitute for pericardium lesions, because it is integrated into the biologic tissue owing to its low immunogenicity and its ability to diminish the occurrence of adhesions and scarring, increasing the pericardium thickness.

How Biomaterials Can Influence Various Cell Types in the Repair and Regeneration of the Heart after Myocardial Infarction

The healthy heart comprises many different cell types that work together to preserve optimal function. However, in a diseased heart the function of one or more cell types is compromised which can lead to many adverse events, one of which is myocardial infarction (MI). Immediately after MI, the cardiac environment is characterized by excessive cardiomyocyte death and inflammatory signals leading to the recruitment of macrophages to clear the debris. Proliferating fibroblasts then invade, and a collagenous scar is formed to prevent rupture. Better functional restoration of the heart is not achieved due to the limited regenerative capacity of cardiac tissue. To address this, biomaterial therapy is being investigated as an approach to improve regeneration in the infarcted heart, as they can possess the potential to control cell function in the infarct environment and limit the adverse compensatory changes that occur post-MI. Over the past decade, there has been considerable research into the development of biomaterials for cardiac regeneration post-MI; and various effects have been observed on different cell types depending on the biomaterial that is applied. Biomaterial treatment has been shown to enhance survival, improve function, promote proliferation, and guide the mobilization and recruitment of different cells in the post-MI heart. This review will provide a summary on the biomaterials developed to enhance cardiac regeneration and remodeling post-MI with a focus on how they control macrophages, cardiomyocytes, fibroblasts, and endothelial cells. A better understanding of how a biomaterial interacts with the different cell types in the heart may lead to the development of a more optimized biomaterial therapy for cardiac regeneration.