Direct E-jet printing of three-dimensional fibrous scaffold for tendon tissue engineering

Tailoring the pore design of embroidered structures by melt electrowriting to enhance the cell alignment in scaffold-based tendon reconstruction

Tissue engineering of ligaments and tendons aims to reproduce the complex and hierarchical tissue structure while meeting the biomechanical and biological requirements. For the first time, the additive manufacturing methods of embroidery technology and melt electrowriting (MEW) were combined to mimic these properties closely. The mechanical benefits of embroidered structures were paired with a superficial micro-scale structure to provide a guide pattern for directional cell growth. An evaluation of several previously reported MEW fiber architectures was performed. The designs with the highest cell orientation of primary dermal fibroblasts were then applied to embroidery structures and subsequently evaluated using human adipose-derived stem cells (AT-MSC). The addition of MEW fibers resulted in the formation of a mechanically robust layer on the embroidered scaffolds, leading to composite structures with mechanical properties comparable to those of the anterior cruciate ligament. Furthermore, the combination of embroidered and MEW structures supports a higher cell orientation of AT-MSC compared to embroidered structures alone. Collagen coating further promoted cell attachment. Thus, these investigations provide a sound basis for the fabrication of heterogeneous and hierarchical synthetic tendon and ligament substitutes.

Biofabrication of Composite Tendon Constructs with the Fibrous Arrangement, High Cell Density, and Enhanced Cell Alignment

Current tissue-engineered tendons are mostly limited to the replication of fibrous organizations of native tendons, which lack the biomimicry of a densely packed cell arrangement. In this study, composite tendon constructs (CTCs) with fibrous arrangement, high cell density, and enhanced cell alignment were developed by integrating the electrohydrodynamic jet 3D printing (e-jetting) technique and the fabrication of tissue strands (TSs). A tubular polycaprolactone (PCL) scaffold was created using e-jetting, followed by coating a thin layer of alginate. Human mesenchymal stem cells were then microinjected into the PCL scaffolds, aggregated into TSs, and formed CTCs with a core-shell structure. Owing to the presence of TSs, CTCs demonstrated the anatomically relevant cell density and morphology, and cells migrated from the TSs onto e-jetted scaffolds. Also, the mechanical strength of CTCs approached that of native tendons due to the existence of e-jetted scaffolds (Young's modulus: ∼21 MPa, ultimate strength: ∼5 MPa). During the entire culture period, CTCs maintained high survival rates and good structural integrity without the observation of necrotic cores and disintegration of two portions. In addition, CTCs that were cultured with uniaxial cyclic stretching revealed not only the increased expression of tendon-related proteins but also the enhanced cellular orientation. The promising results demonstrated the potential of this novel biofabrication strategy for building tissue-engineered tendon constructs with the proper biological, mechanical, and histological relevance..

Morphological and biochemical analysis of cells cultured on fibrous poly(ε-caprolactone) scaffolds with different degrees of fiber alignment produced by solution blow spinning

BACKGROUND

Bioresorbable materials are compounds that decompose in physiological mediums both in vitro and in vivo and are used as an alternative to temporary implants in injured tissues. The aim of this study was to analyze the morphology and cytochemistry of cells grown on fibrous poly(ε-caprolactone) (PCL) scaffolds and to measure cell metabolism parameters by biochemical analysis of the conditioned culture medium from cells grown on the scaffolds.

METHODS

Fibrous PCL scaffolds were used under the following conditions: unaligned fibers (NA), fibers aligned at 150 rpm (A150), and fibers aligned at 300 rpm (A300). Vero cells were cultured on these scaffolds for 24 h, 48 h, and 72 h. Samples were analyzed by SEM, MicroCT, cytochemistry, and culture medium biochemistry.

RESULTS

The results of the cytochemical analysis showed cells were confluent and well spread on the culture plate, while cells grown on the polymeric scaffold, exhibited an elongated morphology. In the biochemical analyses, no significant differences were observed in the expression of alkaline phosphatase or in the levels of cholesterol or total protein in the culture medium. The different materials do not seem to promote changes in the expression or metabolism of these molecules. Only glucose was markedly reduced in the culture medium of cells grown on either aligned or unaligned scaffolds for 48 h or 72 h. This finding indicates the intense energy requirements of cells grown on these scaffolds.

CONCLUSION

PCL fibers showed a great capacity to support cell growth. These data reinforce the interpretation that cells grow satisfactorily on PCL scaffolds.

Biomimetic Scaffolds for Tendon Tissue Regeneration

Tendon tissue connects muscle to bone and plays crucial roles in stress transfer. Tendon injury remains a significant clinical challenge due to its complicated biological structure and poor self-healing capacity. The treatments for tendon injury have advanced significantly with the development of technology, including the use of sophisticated biomaterials, bioactive growth factors, and numerous stem cells. Among these, biomaterials that the mimic extracellular matrix (ECM) of tendon tissue would provide a resembling microenvironment to improve efficacy in tendon repair and regeneration. In this review, we will begin with a description of the constituents and structural features of tendon tissue, followed by a focus on the available biomimetic scaffolds of natural or synthetic origin for tendon tissue engineering. Finally, we will discuss novel strategies and present challenges in tendon regeneration and repair.

Triphasic 3D In Vitro Model of Bone-Tendon-Muscle Interfaces to Study Their Regeneration

The transition areas between different tissues, known as tissue interfaces, have limited ability to regenerate after damage, which can lead to incomplete healing. Previous studies focussed on single interfaces, most commonly bone-tendon and bone-cartilage interfaces. Herein, we develop a 3D in vitro model to study the regeneration of the bone-tendon-muscle interface. The 3D model was prepared from collagen and agarose, with different concentrations of hydroxyapatite to graduate the tissues from bones to muscles, resulting in a stiffness gradient. This graduated structure was fabricated using indirect 3D printing to provide biologically relevant surface topographies. MG-63, human dermal fibroblasts, and Sket.4U cells were found suitable cell models for bones, tendons, and muscles, respectively. The biphasic and triphasic hydrogels composing the 3D model were shown to be suitable for cell growth. Cells were co-cultured on the 3D model for over 21 days before assessing cell proliferation, metabolic activity, viability, cytotoxicity, tissue-specific markers, and matrix deposition to determine interface formations. The studies were conducted in a newly developed growth chamber that allowed cell communication while the cell culture media was compartmentalised. The 3D model promoted cell viability, tissue-specific marker expression, and new matrix deposition over 21 days, thereby showing promise for the development of new interfaces.

Recent advances in tendon tissue engineering strategy

Tendon injuries often result in significant pain and disability and impose severe clinical and financial burdens on our society. Despite considerable achievements in the field of regenerative medicine in the past several decades, effective treatments remain a challenge due to the limited natural healing capacity of tendons caused by poor cell density and vascularization. The development of tissue engineering has provided more promising results in regenerating tendon-like tissues with compositional, structural and functional characteristics comparable to those of native tendon tissues. Tissue engineering is the discipline of regenerative medicine that aims to restore the physiological functions of tissues by using a combination of cells and materials, as well as suitable biochemical and physicochemical factors. In this review, following a discussion of tendon structure, injury and healing, we aim to elucidate the current strategies (biomaterials, scaffold fabrication techniques, cells, biological adjuncts, mechanical loading and bioreactors, and the role of macrophage polarization in tendon regeneration), challenges and future directions in the field of tendon tissue engineering.

Natural, synthetic and commercially-available biopolymers used to regenerate tendons and ligaments

Tendon and ligament (TL) injuries affect millions of people annually. Biopolymers play a significant role in TL tissue repair, whether the treatment relies on tissue engineering strategies or using artificial tendon grafts. The biopolymer governs the mechanical properties, biocompatibility, degradation, and fabrication method of the TL scaffold. Many natural, synthetic and hybrid biopolymers have been studied in TL regeneration, often combined with therapeutic agents and minerals to engineer novel scaffold systems. However, most of the advanced biopolymers have not advanced to clinical use yet. Here, we aim to review recent biopolymers and discuss their features for TL tissue engineering. After introducing the properties of the native tissue, we discuss different types of natural, synthetic and hybrid biopolymers used in TL tissue engineering. Then, we review biopolymers used in commercial absorbable and non-absorbable TL grafts. Finally, we explain the challenges and future directions for the development of novel biopolymers in TL regenerative treatment.

Towards biomimetic, lattice-based, tendon and ligament metamaterial designs

The engineering of tendon and ligament tissue biocompatible restoration materials constitutes a long-standing engineering challenge, from the chemical, biological and mechanical compatibility analysis and design perspective. Their mechanics are inherently anisotropic, exceeding the potential limits of common, non-architected engineering materials. In the current contribution, the design of advanced material or "metamaterial" architectures that can emulate the mechanical properties observed in native tendon and ligament tissues is analytically, experimentally, and numerically investigated. To that scope, anisotropic metamaterial designs that are based on rectangular cuboid architectures with and without inner body-centered strengthening cores are considered. Thereupon, the metamaterial design specifications required for the approximation of the highly anisotropic tissue performance, namely of the characteristic normal, shear and Poisson's ratio attributes are studied. It is shown that certain strengthened, anisotropic body-centered cuboid lattice architectures allow for substantial effective metamaterial stiffness along the primal tissue loading direction, upon a rather low shear loading resistance. The previous mechanical attributes come along with Poisson's ratio values well above unity and moderate relative density values, furnishing a combination of material characteristics that is highly desirable in restoration praxis. The analytically and numerically guided anisotropic metamaterial performance is experimentally reproduced both for the case of uniaxial and shear loads, using a microfabrication stereolithography additive manufacturing technique. The obtained scanning electron microscopy images highlight the fabrication feasibility of the identified metamaterial architectures, in scales that are directly comparable with the ones reported for the natural tissues, having feature sizes in the range of some 10^ths of micrometers and elastic attributes within the range of clinical observation.

New frontiers of tendon augmentation technology in tissue engineering and regenerative medicine: a concise literature review

Tissue banking programs fail to meet the demand for human organs and tissues for transplantation into patients with congenital defects, injuries, chronic diseases, and end-stage organ failure. Tendons and ligaments are among the most frequently ruptured and/or worn-out body tissues owing to their frequent use, especially in athletes and the elderly population. Surgical repair has remained the mainstay management approach, regardless of scarring and adhesion formation during healing, which then compromises the gliding motion of the joint and reduces the quality of life for patients. Tissue engineering and regenerative medicine approaches, such as tendon augmentation, are promising as they may provide superior outcomes by inducing host-tissue ingrowth and tendon regeneration during degradation, thereby decreasing failure rates and morbidity. However, to date, tendon tissue engineering and regeneration research has been limited and lacks the much-needed human clinical evidence to translate most laboratory augmentation approaches to therapeutics. This narrative review summarizes the current treatment options for various tendon pathologies, future of tendon augmentation, cell therapy, gene therapy, 3D/4D bioprinting, scaffolding, and cell signals.

Advanced Nanofiber-Based Scaffolds for Achilles Tendon Regenerative Engineering

The Achilles tendon (AT) is responsible for running, jumping, and standing. The AT injuries are very common in the population. In the adult population (21–60 years), the incidence of AT injuries is approximately 2.35 per 1,000 people. It negatively impacts people’s quality of life and increases the medical burden. Due to its low cellularity and vascular deficiency, AT has a poor healing ability. Therefore, AT injury healing has attracted a lot of attention from researchers. Current AT injury treatment options cannot effectively restore the mechanical structure and function of AT, which promotes the development of AT regenerative tissue engineering. Various nanofiber-based scaffolds are currently being explored due to their structural similarity to natural tendon and their ability to promote tissue regeneration. This review discusses current methods of AT regeneration, recent advances in the fabrication and enhancement of nanofiber-based scaffolds, and the development and use of multiscale nanofiber-based scaffolds for AT regeneration.

Assembled Cell-Decorated Collagen (AC-DC) Fiber Bioprinted Implants with Musculoskeletal Tissue Properties Promote Functional Recovery in Volumetric Muscle Loss

Musculoskeletal tissue injuries, including volumetric muscle loss (VML), are commonplace and often lead to permanent disability and deformation. Addressing this healthcare need, an advanced biomanufacturing platform, assembled cell-decorated collagen (AC-DC) bioprinting, is invented to rapidly and reproducibly create living biomaterial implants, using clinically relevant cells and strong, microfluidic wet-extruded collagen microfibers. Quantitative analysis shows that the directionality and distribution of cells throughout AC-DC implants mimic native musculoskeletal tissue. AC-DC bioprinted implants further approximate or exceed the strength and stiffness of human musculoskeletal tissue and exceed collagen hydrogel tensile properties by orders of magnitude. In vivo, AC-DC implants are assessed in a critically sized muscle injury in the hindlimb, with limb torque generation potential measured over 12 weeks. Both acellular and cellular implants promote functional recovery compared to the unrepaired group, with AC-DC implants containing therapeutic muscle progenitor cells promoting the highest degree of recovery. Histological analysis and automated image processing of explanted muscle cross-sections reveal increased total muscle fiber count, median muscle fiber size, and increased cellularization for injuries repaired with cellularized implants. These studies introduce an advanced bioprinting method for generating musculoskeletal tissue analogs with near-native biological and biomechanical properties with the potential to repair myriad challenging musculoskeletal injuries.

Electrohydrodynamic jet 3D printing in biomedical applications

Electrohydrodynamic Jet 3D Printing (e-jetting) is a promising technique developed from electrospinning, which enables precise fiber deposition in a layer-by-layer fashion with customized designs. Several studies have verified that e-jetted scaffolds were able to support cell attachment, proliferation, and extracellular matrix formation, as well as cell infiltration into the scaffold due to the well-defined pores. Besides, e-jetting has also been combined with other techniques to incorporate biomaterials (e.g., hydrogels and cell spheroids) that could not be e-jetted, to promote the biological performance of the scaffold. In the recent decade, applying e-jetting in the fabrication of tissue-engineered scaffolds has drawn a lot of interest. Moreover, efforts have been put to develop varied scaffolds for some specific biomedical applications such as cartilage, tendon, and blood vessel, which exhibited superior mechanical properties and promoted cell behaviors including cellular alignment and differentiation. This review article also provides the reader with some crucial considerations and major limitations of e-jetting, such as scaffold design, printability of large-scale constructs, applicable biomaterials, and cell behaviors. Overall, this review article expounds on perspectives in the context of development and biomedical applications of this technique. STATEMENT OF SIGNIFICANCE: E-jetting technique is able to produce fibers with diameter in micrometer scale, which has been considered as a promising 3D printing technique. This technique has shown promise for regeneration of tissue engineered scaffolds with well-defined structures, which has been reported to apply in regeneration of different tissue types. The superior controllability of the process endows the feasibility of constructing multi-scale scaffolds with great biological mimicry and cellular infiltration. The incorporation of other biomaterials into the e-jetted networks further reinforces the scope of applications as compared to e-jetted scaffolds only. There is no doubt that e-jetting will be a great tool for tissue engineered scaffolding, and this review article will give overall perspectives in this topic.

Tendon tissue engineering: Cells, growth factors, scaffolds and production techniques

Tendon injuries are a global health problem that affects millions of people annually. The properties of tendons make their natural rehabilitation a very complex and long-lasting process. Thanks to the development of the fields of biomaterials, bioengineering and cell biology, a new discipline has emerged, tissue engineering. Within this discipline, diverse approaches have been proposed. The obtained results turn out to be promising, as increasingly more complex and natural tendon-like structures are obtained. In this review, the nature of the tendon and the conventional treatments that have been applied so far are underlined. Then, a comparison between the different tendon tissue engineering approaches that have been proposed to date is made, focusing on each of the elements necessary to obtain the structures that allow adequate regeneration of the tendon: growth factors, cells, scaffolds and techniques for scaffold development. The analysis of all these aspects allows understanding, in a global way, the effect that each element used in the regeneration of the tendon has and, thus, clarify the possible future approaches by making new combinations of materials, designs, cells and bioactive molecules to achieve a personalized regeneration of a functional tendon.

Hybrid Bioprinting of Zonally Stratified Human Articular Cartilage Using Scaffold-Free Tissue Strands as Building Blocks

The heterogeneous and anisotropic articular cartilage is generally studied as a layered structure of "zones" with unique composition and architecture, which is difficult to recapitulate using current approaches. A novel hybrid bioprinting strategy is presented here to generate zonally stratified cartilage. Scaffold-free tissue strands (TSs) are made of human adipose-derived stem cells (ADSCs) or predifferentiated ADSCs. Cartilage TSs with predifferentiated ADSCs exhibit improved mechanical properties and upregulated expression of cartilage-specific markers at both transcription and protein levels as compared to TSs with ADSCs being differentiated in the form of strands and TSs of nontransfected ADSCs. Using the novel hybrid approach integrating new aspiration-assisted and extrusion-based bioprinting techniques, the bioprinting of zonally stratified cartilage with vertically aligned TSs at the bottom zone and horizontally aligned TSs at the superficial zone is demonstrated, in which collagen fibers are aligned with designated orientation in each zone imitating the anatomical regions and matrix orientation of native articular cartilage. In addition, mechanical testing study reveals a compression modulus of ≈1.1 MPa, which is similar to that of human articular cartilage. The prominent findings highlight the potential of this novel bioprinting approach for building biologically, mechanically, and histologically relevant cartilage for tissue engineering purposes.

Development of Cryogenic Electrohydrodynamic Jet Printing for Fabrication of Fine Scaffolds with Extra Filament Surface Topography

Electrohydrodynamic jet printing (EJP) is a developing additive manufacture technology that enables the fabrication of fine scaffolds directly from polymer solutions or melt. Timely solidification of the polymer jet is the key factor for the success of EJP process. In conventional solution-based EJP methods, it is usually achieved by rapid solvent evaporation and producing a scaffold with smooth filaments. In current study, by combining solution-based EJP with a cryogenic workbench, a cryogenic electrohydrodynamic jet printing (CEJP) system was developed, in which the polymer jet was frozen and solidified quickly at the freezing temperature rather than solvent evaporation. The feasibility and versatility of the CEJP system were verified by successful printing of scaffolds with different hole shapes and pore sizes. Meanwhile, the resulting scaffolds not only had a resolution in the range of 50-80 μm but also possessed oriented "ridges" and "valleys" on surface of the filaments, which was conductive to cell orientation. Therefore, this work provides a novel method to print fine scaffolds with extra surface topography.

In Vitro Innovation of Tendon Tissue Engineering Strategies

Tendinopathy is the term used to refer to tendon disorders. Spontaneous adult tendon healing results in scar tissue formation and fibrosis with suboptimal biomechanical properties, often resulting in poor and painful mobility. The biomechanical properties of the tissue are negatively affected. Adult tendons have a limited natural healing capacity, and often respond poorly to current treatments that frequently are focused on exercise, drug delivery, and surgical procedures. Therefore, it is of great importance to identify key molecular and cellular processes involved in the progression of tendinopathies to develop effective therapeutic strategies and drive the tissue toward regeneration. To treat tendon diseases and support tendon regeneration, cell-based therapy as well as tissue engineering approaches are considered options, though none can yet be considered conclusive in their reproduction of a safe and successful long-term solution for full microarchitecture and biomechanical tissue recovery. In vitro differentiation techniques are not yet fully validated. This review aims to compare different available tendon in vitro differentiation strategies to clarify the state of art regarding the differentiation process.

3D printing of multilayered scaffolds for rotator cuff tendon regeneration

Repairing massive rotator cuff tendon defects remains a challenge due to the high retear rate after surgical intervention. 3D printing has emerged as a promising technique that enables the fabrication of engineered tissues with heterogeneous structures and mechanical properties, as well as controllable microenvironments for tendon regeneration. In this study, we developed a new strategy for rotator cuff tendon repair by combining a 3D printed scaffold of polylactic-co-glycolic acid (PLGA) with cell-laden collagen-fibrin hydrogels. We designed and fabricated two types of scaffolds: one featuring a separate layer-by-layer structure and another with a tri-layered structure as a whole. Uniaxial tensile tests showed that both types of scaffolds had improved mechanical properties compared to single-layered PLGA scaffolds. The printed scaffold with collagen-fibrin hydrogels effectively supported the growth, proliferation, and tenogenic differentiation of human adipose-derived mesenchymal stem cells. Subcutaneous implantation of the multilayered scaffolds demonstrated their excellent in vivo biocompatibility. This study demonstrates the feasibility of 3D printing multilayered scaffolds for application in rotator cuff tendon regeneration.

High-resolution electrohydrodynamic bioprinting: a new biofabrication strategy for biomimetic micro/nanoscale architectures and living tissue constructs

Electrohydrodynamic (EHD) printing is a newly emerging additive manufacturing strategy for the controlled fabrication of three-dimensional (3D) micro/nanoscale architectures. This unique superiority makes it particularly suitable for the biofabrication of artificial tissue analogs with biomimetic structural organizations similar to the scales of native extracellular matrix (ECM) or living cells, which shows great potentials to precisely regulate cellular behaviors and tissue regeneration. Here the state-of-the-art advancements of high-resolution EHD bioprinting were reviewed mainly including melt-based and solution-based processes for the fabrication of micro/nanoscale fibrous scaffolds and living tissues constructs. The related printing materials, innovations on structure design and printing processes, functionalization of the resultant architectures as well as their effects on the mechanical and biological properties of the EHD-printed structures were introduced and analyzed. The recent explorations on the EHD cell printing for high-resolution cell-laden microgel patterning and 3D construct fabrication were highlighted. The major challenges as well as possible solutions to translate EHD bioprinting into a mature and prevalent biofabrication strategy were finally discussed.

Addressing present pitfalls in 3D printing for tissue engineering to enhance future potential

Additive manufacturing in tissue engineering has significantly advanced in acceptance and use to address complex problems. However, there are still limitations to the technologies used and potential challenges that need to be addressed by the community. In this manuscript, we describe how the field can be advanced not only through the development of new materials and techniques but also through the standardization of characterization, which in turn may impact the translation potential of the field as it matures. Furthermore, we discuss how education and outreach could be modified to ensure end-users have a better grasp on the benefits and limitations of 3D printing to aid in their career development.

Target regulation of both VECs and VSMCs by dual-loading miRNA-126 and miRNA-145 in the bilayered electrospun membrane for small-diameter vascular regeneration

Clinical utility of small-diameter vascular grafts is still challenging in blood vessel regeneration owing to thrombosis and intimal hyperplasia. To cope with the issues, modulation of gene expression via microRNAs (miRNAs) could be a feasible approach by rational regulating physiological activities of both vascular endothelial cells (VECs) and vascular smooth muscle cells (VSMCs). Our previous studies demonstrated that individually loaded miRNA-126 (miR-126) or miRNA-145 (miR-145) in the electrospun membranes showed the tendency to promote vascular regeneration. In this work, the bilayered electrospun graft in 1.5-mm diameter was developed by emulsion electrospinning to dual-load miR-126 and miR-145 for target regulation of both VECs and VSMCs, respectively. Accelerated release of miR-126 was achieved by introducing poly(ethylene glycol) in the inner electrospun poly(ethylene glycol)-b-poly(l-lactide-co-caprolactone) ultrafine fibrous membrane, reaching 61.3 ± 1.2% of the cumulative release in the initial 10 days, whereas the outer electrospun poly(l-lactide-co-glycolide) membrane composed of microfibers fulfilled prolonged release of miR-145 for about 56 days. In vivo tests suggested that dual-loading with miR-126 and miR-145 in the bilayered electrospun membranes could modulate both VECs and VSMCs for rapid endothelialization and hyperplasia inhibition as well. It is reasonably expected that dual target-delivery of miR-126 and miR-145 in the electrospun vascular grafts has effective potential for small-diameter vascular regeneration. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 371-382, 2019.

Physical Microenvironment-Based Inducible Scaffold for Stem Cell Differentiation and Tendon Regeneration

Tendon injuries are common musculoskeletal system disorders, but the tendons have poor regeneration ability. To address this issue, tendon tissue engineering provides potential strategies for future therapeutic treatment. Elements of the physical microenvironment, such as the mechanical force and surface topography, play a vital role in regulating stem cell fate, enhancing the differentiation efficiency of seed cells in tendon tissue engineering. Various inducible scaffolds have been widely explored for tendon regeneration, and scaffold-enhancing modifications have been extensively studied. In this review, we systematically summarize the effects of the physical microenvironment on stem cell differentiation and tendon regeneration; we also provide an overview of the inducible scaffolds for stem cell tenogenic differentiation. Finally, we suggest some potential scaffold-based therapies for tendon injuries, presenting an interesting perspective on tendon regenerative medicine.

Pluronic F127 blended polycaprolactone scaffolds via e-jetting for esophageal tissue engineering

Several attempts have been made to fabricate esophageal tissue engineering scaffolds. However, most of these scaffolds possess randomly oriented fibres and uncontrollable pore sizes. In order to mimic the native esophageal tissue structure, electro-hydrodynamic jetting (e-jetting) was used in this study to fabricate scaffolds with aligned fibres and controlled pore size. A hydrophilic additive, Pluronic F127 (F127), was blended with polycaprolactone (PCL) to improve the wettability of the scaffolds and hence the cell adhesion. PCL/F127 composite scaffolds with different weight ratios (0-12%) were fabricated. The wettability, phase composition, and the mechanical properties of the fabricated scaffolds were investigated. The results show that the e-jetted scaffolds have controllable fibres orientated in two perpendicular directions, which are similar to the human esophagus structure and suitable pore size for cell infiltration. In addition, the scaffolds with 8% F127 exhibited better wettability (contact angle of 14°) and an ultimate tensile strength (1.2 MPa) that mimics the native esophageal tissue. Furthermore, primary human esophageal fibroblasts were seeded on the e-jetted scaffolds. PCL/F127 scaffolds showed enhanced cell proliferation and expression of the vascular endothelial growth factor (VEGF) compared to pristine PCL scaffolds (1.5- and 25.8- fold increase, respectively; P < 0.001). An in vitro wound model made using the PCL/F127 scaffolds showed better cell migration than the PCL scaffolds. In summary, the PCL/F127 e-jetted scaffolds offer a promising strategy for the esophagus tissue repair.

Three-dimensional cell-based bioprinting for soft tissue regeneration

Three-dimensional (3D) bioprinting technologies have been developed to offer construction of biological tissue constructs that mimic the anatomical and functional features of native tissues or organs. These cutting-edge technologies could make it possible to precisely place multiple cell types and biomaterials in a single 3D tissue construct. Hence, 3D bioprinting is one of the most attractive and powerful tools to provide more anatomical and functional similarity of human tissues or organs in tissue engineering and regenerative medicine. In recent years, this 3D bioprinting continually shows promise for building complex soft tissue constructs through placement of cell-laden hydrogel-based bioinks in a layer-by-layer fashion. This review will discuss bioprinting technologies and their applications in soft tissue regeneration.

Mechanically-enhanced three-dimensional scaffold with anisotropic morphology for tendon regeneration

Tissue engineering has showed promising results in restoring diseased tendon tissue functions. Herein, a hybrid three-dimensional (3D) porous scaffold comprising an outer portion rolled from an electrohydrodynamic jet printed poly(ɛ-caprolactone) (PCL) fiber mesh, and an inner portion fabricated from uniaxial stretching of a heat-sealed PCL tube, was developed for tendon tissue engineering (TE) application. The outer portion included three layers of micrometer-scale fibrous bundles (fiber diameter: ~25 µm), with an interconnected spacing and geometric anisotropy along the scaffold length. The inner portion showed orientated micro-ridges/grooves in a parallel direction to that of the outer portion. Owning to the addition of the inner portion, the as-fabricated scaffold exhibited comparable mechanical properties to those of the human patellar tendon in terms of Young's modulus (~227 MPa) and ultimate tensile stress (~50 MPa). Compared to the rolled electrospun fibers, human tenocytes cultured in the tendon scaffolds showed increased cellular metabolism. Furthermore, the 3D tendon scaffold resulted in up-regulated cell alignment, cell elongation and formation of collagen type I. These results demonstrated the potential of mechanically-enhanced 3D fibrous scaffold for applications in tendon TE, with desired cell alignment and functional differentiation.