Surface modification strategies for hemodialysis catheters to prevent catheter-related infections: A review

Long-Term Prevention of Biofilm Formation by Polycatechol-Based Supramolecular Assemblies with Low Molecular Weight Polymers on Surfaces

Achievement of a stable surface coating with long-term resistance to biofilm formation remains a challenge. Catechol-based polymerization chemistry and surface deposition are used as tools for surface modification of diverse materials. However, the control of surface deposition of the coating, surface coverage, coating properties, and long-term protection against biofilm formation remain to be solved. We report a new approach based on supramolecular assembly to generate long-acting antibiofilm coating. Here, we utilized catechol chemistry in combination with low molecular weight amphiphilic polymers for the generation of such coatings. Screening studies with diverse low molecular weight (LMW) polymers and different catechols are utilized to identify lead compositions, which resulted in a thick coating with high surface coverage, smoothness, and antibiofilm activity. We have identified that small supramolecular assemblies (∼10 nm) formed from a combination of polydopamine and LMW poly(N-vinyl caprolactam) (PVCL) resulted in relatively thick coating (∼300 nm) with excellent surface coverage in comparison to other polymers and catechol combinations. The coating properties, such as thickness (10-300 nm) and surface hydrophilicity (with water contact angle: 20-60°), are readily controlled. The optimal coating composition showed excellent antibiofilm properties with long-term (>28 days) antibiofilm activity against both Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) strains. We further utilized the combination of optimal binary coating with silver to generate a coating with sustained release of silver ions, resulting in killing both adhered and planktonic bacteria and preventing long-term surface bacterial colonization. The new coating method utilizing LMW polymers opens a new avenue for the development of a novel class of thick, long-acting antibiofilm coatings.

Study on PTFE superhydrophobic coating modified by IC@dMSNs and its enhanced antibacterial effect

INTRODUCTION

Vascular catheter-related infections and thrombosis are common and may lead to serious complications after catheterization. Reducing the incidence of such infections has become a significant challenge.

OBJECTIVES

This study aims to develop a super hydrophobic nanocomposite drug-loaded vascular catheter that can effectively resist bacterial infections and blood coagulation.

METHODS

In this study, a SiO2 nanocoated PTFE (Polytetrafluoroethylene) catheter (PTFE-SiO2) was prepared and further optimized to prepare a SiO2 nanocoated PTFE catheter loaded with imipenem/cilastatin sodium (PTFE-IC@dMSNs). The catheters were characterized for performance, cell compatibility, anticoagulant performance, in vitro and in vivo antibacterial effect and biological safety.

RESULTS

PTFE-IC@dMSNs catheter has efficient drug loading performance and drug release rate and has good cell compatibility and anticoagulant effect in vitro. Compared with the PTFE-SiO2 catheter, the inhibition ring of the PTFE-IC@dMSNs catheter against Escherichia coli increased from 3.98 mm2 to 4.56 mm2, and the antibacterial rate increased from about 50.8 % to 56.9 %, with a significant difference (p < 0.05). The antibacterial zone against Staphylococcus aureus increased from 8.63 mm2 to 11.74 mm2, and the antibacterial rate increased from approximately 83.5 % to 89.3 %, showing a significant difference (p < 0.05). PTFE-IC@dMSNs catheter also has good biocompatibility in vivo. Furthermore, the PTFE-IC@dMSNs catheter can reduce the adhesion of blood cells and have excellent anticoagulant properties, and even maintain these properties even with the addition of imipenem/cilastatin sodium.

CONCLUSION

Compared with PTFE, PTFE-SiO2 and PTFE-IC@dMSNs catheters have good characterization performance, cell compatibility, and anticoagulant properties. PTFE SiO2 and PTFE-IC@dMSNs catheters have good antibacterial performance and tissue safety against E. coli and S. aureus. Relatively, PTFE-SiO2 and PTFE-IC@dMSNs catheter has better antibacterial properties and histocompatibility and has potential application prospects in anti-bacterial catheter development and anticoagulation.

Antibiotic lock solutions as adjunct therapy for catheter-related blood stream infections in pediatric hemodialysis patients

The predominant use of intravenous catheters as primary access type in the pediatric hemodialysis population is associated with an increased risk of catheter related blood stream infections. While strict adherence to catheter placement and long-term care guidelines have helped to decrease the incidence of these infections, blood stream infections remain an infection burden in pediatric patients with long term hemodialysis catheters. The formation of biofilms on the surfaces of these catheters has been shown to be a source of microbes causing blood stream infections. One of the strategies for preventing bacterial colonization, inhibiting microbial multiplication, and suppressing the seeding of these microbes from biofilms upon maturation, has been the use of antibiotic-based lock solutions in-between dialysis treatments. Although clinical guidelines for the use of antibiotic lock solutions are yet to be developed, available evidence suggests a beneficial role of antibiotic lock solutions in the management of catheter related blood stream infections. Additionally, a clear understanding of how biofilms are formed and their role in the pathogenesis of catheter related bloodstream infection will facilitate the development of solutions that can prevent biofilm formation and inhibit their multiplication, maturation and seeding into the bloodstream.

Easy and versatile cellulosic support inhibiting broad spectrum strains: synergy between photodynamic antimicrobial therapy and polymyxin B

Despite advances achieved in the health field over the last decade, infections caused by resistant bacterial strains are an increasingly important societal issue that needs to be addressed. New approaches have already been developed to overcome this problem. Photodynamic antimicrobial chemotherapy (PACT) could provide a promising alternative method to eradicate microbes. This approach has already inspired the development of innovative surfaces. Interesting results were achieved against Gram-positive bacteria, but it also appeared that Gram-negative strains, especially Pseudomonas aeruginosa, were less sensitive to PACT. However, materials coated with cationic porphyrins have already proven their wide-spectrum activity, but these materials were not suitable for industrial-scale production. The main aim of this work was the design of a large-scale evolutionary material based on PACT and antibiotic prophylaxis. Transparent regenerated cellulose has been simply impregnated with a usual cationic porphyrin (N-methylpyridyl) and an antimicrobial peptide (polymyxin B). In addition to its photophysical properties, this film exhibited a wide-spectrum bactericidal activity over 4 days despite daily application of fresh bacterial inoculums. The efficiency of PACT and polymyxin B combination could help to reduce the emergence of bacterial multi-resistant strains and we believe that this kind of material would provide an excellent opportunity to prevent bacterial contamination of bandages or packaging.

Microbiota of long-term indwelling hemodialysis catheters during renal transplantation perioperative period: a cross-sectional metagenomic microbial community analysis

Background: Catheter-related infection (CRI) is a major complication in patients undergoing hemodialysis. The lack of high-throughput research on catheter-related microbiota makes it difficult to predict the occurrence of CRI. Thus, this study aimed to delineate the microbial structure and diversity landscape of hemodialysis catheter tips among patients during the perioperative period of kidney transplantation (KTx) and provide insights into predicting the occurrence of CRI.Methods: Forty patients at the Department of Transplantation undergoing hemodialysis catheter removal were prospectively included. Samples, including catheter tip, catheter outlet skin swab, catheter blood, peripheral blood, oropharynx swab, and midstream urine, from the separate pre- and post-KTx groups were collected and analyzed using metagenomic next-generation sequencing (mNGS). All the catheter tips and blood samples were cultured conventionally.Results: The positive detection rates for bacteria using mNGS and traditional culture were 97.09% (200/206) and 2.65% (3/113), respectively. Low antibiotic-sensitivity biofilms with colonized bacteria were detected at the catheter tip. In asymptomatic patients, no statistically significant difference was observed in the catheter tip microbial composition and diversity between the pre- and post-KTx group. The catheter tip microbial composition and diversity were associated with fasting blood glucose levels. Microorganisms at the catheter tip most likely originated from catheter outlet skin and peripheral blood.Conclusions: The long-term colonization microbiota at the catheter tip is in a relatively stable state and is not readily influenced by KTx. It does not act as the source of infection in all CRIs, but could reflect hematogenous infection to some extent.

SiO2 nanosphere coated tough catheter with superhydrophobic surface for improving the antibacteria and hemocompatibility

Catheter infection is the most common complication after vascular catheter placement, which seriously threatens the survival of critically ill patients. Although catheters with antibacterial drug coatings have been used, catheter infections have not been effectively resolved. In this research, a SiO₂ nanosphere-coated PTFE catheter (PTFE-SiO₂) with enhanced antibacterial and excellent mechanical properties was prepared via dopamine as a graft bridge. The microscopic morphology results show that the nanospheres are uniformly dispersed on the surface of the catheter. The physicochemical characterization confirmed that PTFE-SiO₂ had reliable bending resistance properties, superhydrophobicity, and cytocompatibility and could inhibit thrombosis. Antibacterial results revealed that PTFE-SiO₂ could hinder the reproduction of E. coli and S. aureus. This research demonstrates the hydroxyl-rich materials obtained by hydroboration oxidation have the advantages of better dispersion of functional coatings, indicating their potential for helpful modification of catheters.

The Role of Abdominal Drain Cultures in Managing Abdominal Infections

Intra-abdominal infections (IAI) are common in hospitalized patients, both in and outside of the intensive care unit. Management principles include antimicrobial therapy and source control. Typically, these infections are polymicrobial, and intra-operative samples will guide the targeted antimicrobial therapy. Although the use of prophylactic abdominal drains in patients undergoing abdominal surgery is decreasing, the use of drains to treat IAI, both in surgical and non-surgical strategies for abdominal infection, is increasing. In this context, samples from abdominal drains are often used to assist in antimicrobial decision making. In this narrative review, we provide an overview of the current role of abdominal drains in surgery, discuss the importance of biofilm formation in abdominal drains and the mechanisms involved, and review the clinical data on the use of sampling these drains for diagnostic purposes. We conclude that biofilm formation and the colonization of abdominal drains is common, which precludes the use of abdominal fluid to reliably diagnose IAI and identify the pathogens involved. We recommend limiting the use of drains and, when present, avoiding routine microbiological sampling.

Development and Evaluation of a Film Forming System Containing Myricetin and Miconazole Nitrate for Preventing Candida albicans Catheter-Related Infection

Background: Candida albicans catheter-related infection (CRI) is a great challenge in clinic now, mainly due to the difficulty in eradicating the biofilms. Purpose: In this study, the mechanism of the antibiofilm effect of myricetin (MY) on C. albicans was illustrated. A film forming system (FFS) containing MY and miconazole nitrate (MN) was developed, optimized, and evaluated. The anti-infection effect of MY+MN@FFS against C. albicans CRI was investigated in vivo. Study Design and Methods: To clarify the mechanism of the action of MY, the influence of MY on each key process of the formation of C. albicans biofilms was evaluated. To deliver MY and MN into the skin and form a drug reservoir on the surface of the skin, the FFS was used as a carrier and MY+MN@FFS was developed, optimized, and evaluated. After preliminary confirmation of drug safety, a percutaneously inserted C. albicans CRI mouse model was established to investigate the in vivo anti-infection effect of MY+MN@FFS by fluorescence microscopy and scanning electron microscopy on the outer surface of the catheters, hematoxylin/eosin staining, and periodic acid-Schiff staining of the mice skin tissues. Results: MY was found to inhibit the morphological transition of C. albicans and the secretion of exopolysaccharides, resulting in a reduction in biofilms. MY+MN@FFS exhibited excellent properties and no irritation to mice skin. In an in vivo anti-infection study, MY+MN@FFS exhibited an excellent preventive effect against percutaneously inserted C. albicans CRI. Conclusion: MY+MN@FFS might be a potential approach for effectively preventing percutaneously inserted C. albicans CRI in clinic.

Host Defense Peptide-Mimicking Polymers and Polymeric-Brush-Tethered Host Defense Peptides: Recent Developments, Limitations, and Potential Success

Amphiphilic antimicrobial polymers have attracted considerable interest as structural mimics of host defense peptides (HDPs) that provide a broad spectrum of activity and do not induce bacterial-drug resistance. Likewise, surface engineered polymeric-brush-tethered HDP is considered a promising coating strategy that prevents infections and endows implantable materials and medical devices with antifouling and antibacterial properties. While each strategy takes a different approach, both aim to circumvent limitations of HDPs, enhance physicochemical properties, therapeutic performance, and enable solutions to unmet therapeutic needs. In this review, we discuss the recent advances in each approach, spotlight the fundamental principles, describe current developments with examples, discuss benefits and limitations, and highlight potential success. The review intends to summarize our knowledge in this research area and stimulate further work on antimicrobial polymers and functionalized polymeric biomaterials as strategies to fight infectious diseases.

Universal Intraductal Surface Antifouling Coating Based on an Amphiphilic Copolymer

Surface modification on the inner wall of medical or industrial polymeric catheters with a high length/diameter ratio is highly desired. Herein, a universal and facile method based on an amphiphilic copolymer was developed to immobilize an intraductal surface antifouling coating for a variety of polymeric catheters. A fouling-repelled thin layer was formed by swelling-driven adsorption via directly perfusing an amphiphilic copolymer [polyvinylpyrrolidone-polydimethylsiloxane-polyvinylpyrrolidone (PVP-PDMS-PVP)] solution into catheters. In this copolymer, hydrophobic PDMS was embedded into a shrinking cross-linked network of catheters; also, PVP segments migrated to the surface under driving water to form a hydrophilic antifouling coating. Moreover, because of the coordination between I₂ and pyrrolidone of PVP, the copolymer-modified intraductal surface was then infused with aqueous I₂ to form the PVP-I₂ complex, endowing this coating with bactericidal activity. Notably, diverse catheters with arbitrary shapes (circular, rectangular, triangular, and hexagonal) and different components (silicone, polyurethane, and polyethylene) were also verified to work using this interfacial interpenetration strategy. The findings in this work provide a new avenue toward facile and universal fabrication of intraductal surface antifouling catheters, creating a superior option for decreasing the consumable costs in industrial production and alleviating the pain of replacing catheters for patients.

Challenges in reducing the risk of infection when accessing vascular catheters

Injection safety is essential to reduce the risk of healthcare-associated infections (HAIs) when accessing vascular catheters. This general review evaluates the contamination of vascular catheter access ports and associated HAIs in acute care settings, focusing on open lumen stopcocks (OLSs) and disinfectable needleless closed connectors (DNCCs). PubMed was searched from January 2000 to February 2021. OLS intraluminal surfaces are frequently contaminated during patient care, increasing the risk of HAIs, and neither an isopropyl alcohol (IPA) pad nor a port-scrub device can reduce contamination effectively. In contrast, DNCCs can be disinfected, with most studies indicating less intraluminal contamination than OLSs and some studies showing decreased HAIs. While the optimal DNCC design to reduce HAIs needs to be determined, DNCCs alone or stopcocks with a DNCC bonded to the injection port should replace routine use of OLSs, with OLSs restricted to use in sterile fields. Compliance with disinfection is essential immediately before use of a DNCC as use of a non-disinfected DNCC can have equivalent or greater risk of HAIs compared with use of an OLS. The recommendations for access port disinfection in selected national and international guidelines vary. When comparing in-vitro studies, clinical studies and published guidelines, consensus is lacking; therefore, additional studies are needed, including large randomized controlled trials. IPA caps disinfect DNCCs passively, eliminate scrubbing and provide a contamination barrier; however, their use in neonates has been questioned. Further study is needed to determine whether IPA caps are more efficacious than scrubbing with disinfectant to decrease HAIs related to use of central venous, peripheral venous and arterial catheters.