Prediction of beta-sheet topology and disulfide bridges in polypeptides

Efficient dynamic programming algorithm with prior knowledge for protein β-strand alignment

One of the main tasks towards the prediction of protein β-sheet structure is to predict the native alignment of β-strands. The alignment of two β-strands defines similar regions that may reflect functional, structural, or evolutionary relationships between them. Therefore, any improvement in β-strands alignment not only reduces the computational search space but also improves β-sheet structure prediction accuracy. To define the alignment scores, previous studies utilized predicted residue-residue contacts (contact maps). However, there are two serious problems using them. First, the precision of contact map prediction techniques, especially for long-range contacts (i.e., β-residues), is still not satisfactory. Second, the residue-residue contact predictors usually utilize general properties of amino acids and disregard the structural features of β-residues. In this paper, we consider β-structure information, which is estimated from protein β-sheet data sets, as alignment scores. However, the predicted contact maps are used as a prior knowledge about residues. They are used for strengthening or weakening the alignment scores in our algorithm. Thus, we can utilize both β-residues and β-structure information in alignment of β-strands. The structure of dynamic programming of the alignment algorithm is changed in order to work with our prior knowledge. Moreover, the Four Russians method is applied to the proposed alignment algorithm in order to reduce the time complexity of the problem. For evaluating the proposed method, we applied it to the state-of-the-art β-sheet structure prediction methods. The experimental results on the BetaSheet916 data set showed significant improvements in the execution time, the accuracy of β-strands' alignment and consequently β-sheet structure prediction accuracy. The results are available at http://conceptsgate.com/BetaSheet.

Prediction of protein secondary structure using feature selection and analysis approach

The prediction of the secondary structure of a protein from its amino acid sequence is an important step towards the prediction of its three-dimensional structure. However, the accuracy of ab initio secondary structure prediction from sequence is about 80% currently, which is still far from satisfactory. In this study, we proposed a novel method that uses binomial distribution to optimize tetrapeptide structural words and increment of diversity with quadratic discriminant to perform prediction for protein three-state secondary structure. A benchmark dataset including 2,640 proteins with sequence identity of less than 25% was used to train and test the proposed method. The results indicate that overall accuracy of 87.8% was achieved in secondary structure prediction by using ten-fold cross-validation. Moreover, the accuracy of predicted secondary structures ranges from 84 to 89% at the level of residue. These results suggest that the feature selection technique can detect the optimized tetrapeptide structural words which affect the accuracy of predicted secondary structures.

Protein WISDOM: a workbench for in silico de novo design of biomolecules

The aim of de novo protein design is to find the amino acid sequences that will fold into a desired 3-dimensional structure with improvements in specific properties, such as binding affinity, agonist or antagonist behavior, or stability, relative to the native sequence. Protein design lies at the center of current advances drug design and discovery. Not only does protein design provide predictions for potentially useful drug targets, but it also enhances our understanding of the protein folding process and protein-protein interactions. Experimental methods such as directed evolution have shown success in protein design. However, such methods are restricted by the limited sequence space that can be searched tractably. In contrast, computational design strategies allow for the screening of a much larger set of sequences covering a wide variety of properties and functionality. We have developed a range of computational de novo protein design methods capable of tackling several important areas of protein design. These include the design of monomeric proteins for increased stability and complexes for increased binding affinity. To disseminate these methods for broader use we present Protein WISDOM (http://www.proteinwisdom.org), a tool that provides automated methods for a variety of protein design problems. Structural templates are submitted to initialize the design process. The first stage of design is an optimization sequence selection stage that aims at improving stability through minimization of potential energy in the sequence space. Selected sequences are then run through a fold specificity stage and a binding affinity stage. A rank-ordered list of the sequences for each step of the process, along with relevant designed structures, provides the user with a comprehensive quantitative assessment of the design. Here we provide the details of each design method, as well as several notable experimental successes attained through the use of the methods.

A survey of machine learning methods for secondary and supersecondary protein structure prediction

In this chapter we provide a survey of protein secondary and supersecondary structure prediction using methods from machine learning. Our focus is on machine learning methods applicable to β-hairpin and β-sheet prediction, but we also discuss methods for more general supersecondary structure prediction. We provide background on the secondary and supersecondary structures that we discuss, the features used to describe them, and the basic theory behind the machine learning methods used. We survey the machine learning methods available for secondary and supersecondary structure prediction and compare them where possible.

De novo peptide design with C3a receptor agonist and antagonist activities: theoretical predictions and experimental validation

Targeting the complement component 3a receptor (C3aR) with selective agonists or antagonists is believed to be a viable therapeutic option for several diseases such as stroke, heart attack, reperfusion injuries, and rheumatoid arthritis. We designed a number of agonists, partial agonists, and antagonists of C3aR using our two-stage de novo protein design framework. Of the peptides tested using a degranulation assay in C3aR-transfected rat basophilic leukemia cells, two were prominent agonists (EC(50) values of 25.3 and 66.2 nM) and two others were partial agonists (IC(50) values of 15.4 and 26.1 nM). Further testing of these lead compounds in a calcium flux assay in U937 cells yielded similar results although with reduced potencies compared to transfected cells. The partial agonists also displayed full antagonist activity when tested in a C3aR inhibition assay. In addition, the electrostatic potential profile was shown to potentially discriminate between full agonists and partial agonists.

ASTRO-FOLD 2.0: an Enhanced Framework for Protein Structure Prediction

The three-dimensional (3-D) structure prediction of proteins, given their amino acid sequence, is addressed using the first principles-based approach ASTRO-FOLD 2.0. The key features presented are: (1) Secondary structure prediction using a novel optimization-based consensus approach, (2) β-sheet topology prediction using mixed-integer linear optimization (MILP), (3) Residue-to-residue contact prediction using a high-resolution distance-dependent force field and MILP formulation, (4) Tight dihedral angle and distance bound generation for loop residues using dihedral angle clustering and non-linear optimization (NLP), (5) 3-D structure prediction using deterministic global optimization, stochastic conformational space annealing, and the full-atomistic ECEPP/3 potential, (6) Near-native structure selection using a traveling salesman problem-based clustering approach, ICON, and (7) Improved bound generation using chemical shifts of subsets of heavy atoms, generated by SPARTA and CS23D. Computational results of ASTRO-FOLD 2.0 on 47 blind targets of the recently concluded CASP9 experiment are presented.

β-sheet topology prediction with high precision and recall for β and mixed α/β proteins

The prediction of the correct -sheet topology for pure and mixed proteins is a critical intermediate step toward the three dimensional protein structure prediction. The predicted beta sheet topology provides distance constraints between sequentially separated residues, which reduces the three dimensional search space for a protein structure prediction algorithm. Here, we present a novel mixed integer linear optimization based framework for the prediction of -sheet topology in and mixed proteins. The objective is to maximize the total strand-to-strand contact potential of the protein. A large number of physical constraints are applied to provide biologically meaningful topology results. The formulation permits the creation of a rank-ordered list of preferred -sheet arrangements. Finally, the generated topologies are re-ranked using a fully atomistic approach involving torsion angle dynamics and clustering. For a large, non-redundant data set of 2102 and mixed proteins with at least 3 strands taken from the PDB, the proposed approach provides the top 5 solutions with average precision and recall greater than 78%. Consistent results are obtained in the -sheet topology prediction for blind targets provided during the CASP8 and CASP9 experiments, as well as for actual and predicted secondary structures. The -sheet topology prediction algorithm, BeST, is available to the scientific community at http://selene.princeton.edu/BeST/.

CONCORD: a consensus method for protein secondary structure prediction via mixed integer linear optimization

Most of the protein structure prediction methods use a multi-step process, which often includes secondary structure prediction, contact prediction, fragment generation, clustering, etc. For many years, secondary structure prediction has been the workhorse for numerous methods aimed at predicting protein structure and function. This paper presents a new mixed integer linear optimization (MILP)-based consensus method: a Consensus scheme based On a mixed integer liNear optimization method for seCOndary stRucture preDiction (CONCORD). Based on seven secondary structure prediction methods, SSpro, DSC, PROF, PROFphd, PSIPRED, Predator and GorIV, the MILP-based consensus method combines the strengths of different methods, maximizes the number of correctly predicted amino acids and achieves a better prediction accuracy. The method is shown to perform well compared with the seven individual methods when tested on the PDBselect25 training protein set using sixfold cross validation. It also performs well compared with another set of 10 online secondary structure prediction servers (including several recent ones) when tested on the CASP9 targets ( http://predictioncenter.org/casp9/ ). The average Q3 prediction accuracy is 83.04 per cent for the sixfold cross validation of the PDBselect25 set and 82.3 per cent for the CASP9 targets. We have developed a MILP-based consensus method for protein secondary structure prediction. A web server, CONCORD, is available to the scientific community at http://helios.princeton.edu/CONCORD .

On lattice protein structure prediction revisited

Protein structure prediction is regarded as a highly challenging problem both for the biology and for the computational communities. In recent years, many approaches have been developed, moving to increasingly complex lattice models and off-lattice models. This paper presents a Large Neighborhood Search (LNS) to find the native state for the Hydrophobic-Polar (HP) model on the Face-Centered Cubic (FCC) lattice or, in other words, a self-avoiding walk on the FCC lattice having a maximum number of H-H contacts. The algorithm starts with a tabu-search algorithm, whose solution is then improved by a combination of constraint programming and LNS. The flexible framework of this hybrid algorithm allows an adaptation to the Miyazawa-Jernigan contact potential, in place of the HP model, thus suggesting its potential for tertiary structure prediction. Benchmarking statistics are given for our method against the hydrophobic core threading program HPstruct, an exact method which can be viewed as complementary to our method.

Enhanced Inter-helical Residue Contact Prediction in Transmembrane Proteins

In this paper, based on a recent work by McAllister and Floudas who developed a mathematical optimization model to predict the contacts in transmembrane alpha-helical proteins from a limited protein data set [1], we have enhanced this method by 1) building a more comprehensive data set for transmembrane alpha-helical proteins and this enhanced data set is then used to construct the probability sets, MIN-1N and MIN-2N, for residue contact prediction, 2) enhancing the mathematical model via modifications of several important physical constraints and 3) applying a new blind contact prediction scheme on different protein sets proposed from analyzing the contact prediction on 65 proteins from Fuchs et al. [2]. The blind contact prediction scheme has been tested on two different membrane protein sets. Firstly it is applied to five carefully selected proteins from the training set. The contact prediction of these five proteins uses probability sets built by excluding the target protein from the training set, and an average accuracy of 56% was obtained. Secondly, it is applied to six independent membrane proteins with complicated topologies, and the prediction accuracies are 73% for 2ZY9A, 21% for 3KCUA, 46% for 2W1PA, 64% for 3CN5A, 77% for 3IXZA and 83% for 3K3FA. The average prediction accuracy for the six proteins is 60.7%. The proposed approach is also compared with a support vector machine method (TMhit [3]) and it is shown that it exhibits better prediction accuracy.

Computational design of the lasso peptide antibiotic microcin J25

Microcin J25 (MccJ25) is a 21 amino acid (aa) ribosomally synthesized antimicrobial peptide with an unusual structure in which the eight N-terminal residues form a covalently cyclized macrolactam ring through which the remaining 13 aa tail is fed. An open question is the extent of sequence space that can occupy such an extraordinary, highly constrained peptide fold. To begin answering this question, here we have undertaken a computational redesign of the MccJ25 peptide using a two-stage sequence selection procedure based on both energy minimization and fold specificity. Eight of the most highly ranked sequences from the design algorithm, each of which contained two or three amino acid substitutions, were expressed in Escherichia coli and tested for production and antimicrobial activity. Six of the eight variants were successfully produced by E.coli at production levels comparable with that of the wild-type peptide. Of these six variants, three retain detectable antimicrobial activity, although this activity is reduced relative to wild-type MccJ25. The results here build upon previous findings that even rigid, constrained structures like the lasso architecture are amenable to redesign. Furthermore, this work provides evidence that a large amount of amino acid variation is tolerated by the lasso peptide fold.

New compstatin variants through two de novo protein design frameworks

Two de novo protein design frameworks are applied to the discovery of new compstatin variants. One is based on sequence selection and fold specificity, whereas the other approach is based on sequence selection and approximate binding affinity calculations. The proposed frameworks were applied to a complex of C3c with compstatin variant E1 and new variants with improved binding affinities are predicted and experimentally validated. The computational studies elucidated key positions in the sequence of compstatin that greatly affect the binding affinity. Positions 4 and 13 were found to favor Trp, whereas positions 1, 9, and 10 are dominated by Asn, and position 11 consists mainly of Gln. A structural analysis of the C3c-bound peptide analogs is presented.

Contact prediction for beta and alpha-beta proteins using integer linear optimization and its impact on the first principles 3D structure prediction method ASTRO-FOLD

An integer linear optimization model is presented to predict residue contacts in beta, alpha + beta, and alpha/beta proteins. The total energy of a protein is expressed as sum of a C(alpha)-C(alpha) distance dependent contact energy contribution and a hydrophobic contribution. The model selects contact that assign lowest energy to the protein structure as satisfying a set of constraints that are included to enforce certain physically observed topological information. A new method based on hydrophobicity is proposed to find the beta-sheet alignments. These beta-sheet alignments are used as constraints for contacts between residues of beta-sheets. This model was tested on three independent protein test sets and CASP8 test proteins consisting of beta, alpha + beta, alpha/beta proteins and it was found to perform very well. The average accuracy of the predictions (separated by at least six residues) was approximately 61%. The average true positive and false positive distances were also calculated for each of the test sets and they are 7.58 A and 15.88 A, respectively. Residue contact prediction can be directly used to facilitate the protein tertiary structure prediction. This proposed residue contact prediction model is incorporated into the first principles protein tertiary structure prediction approach, ASTRO-FOLD. The effectiveness of the contact prediction model was further demonstrated by the improvement in the quality of the protein structure ensemble generated using the predicted residue contacts for a test set of 10 proteins.

An improved hybrid global optimization method for protein tertiary structure prediction

First principles approaches to the protein structure prediction problem must search through an enormous conformational space to identify low-energy, near-native structures. In this paper, we describe the formulation of the tertiary structure prediction problem as a nonlinear constrained minimization problem, where the goal is to minimize the energy of a protein conformation subject to constraints on torsion angles and interatomic distances. The core of the proposed algorithm is a hybrid global optimization method that combines the benefits of the αBB deterministic global optimization approach with conformational space annealing. These global optimization techniques employ a local minimization strategy that combines torsion angle dynamics and rotamer optimization to identify and improve the selection of initial conformations and then applies a sequential quadratic programming approach to further minimize the energy of the protein conformations subject to constraints. The proposed algorithm demonstrates the ability to identify both lower energy protein structures, as well as larger ensembles of low-energy conformations.

Selecting high quality protein structures from diverse conformational ensembles

Protein structure prediction encompasses two major challenges: 1), the generation of a large ensemble of high resolution structures for a given amino-acid sequence; and 2), the identification of the structure closest to the native structure for a blind prediction. In this article, we address the second challenge, by proposing what is, to our knowledge, a novel iterative traveling-salesman problem-based clustering method to identify the structures of a protein, in a given ensemble, which are closest to the native structure. The method consists of an iterative procedure, which aims at eliminating clusters of structures at each iteration, which are unlikely to be of similar fold to the native, based on a statistical analysis of cluster density and average spherical radius. The method, denoted as ICON, has been tested on four data sets: 1), 1400 proteins with high resolution decoys; 2), medium-to-low resolution decoys from Decoys 'R' Us; 3), medium-to-low resolution decoys from the first-principles approach, ASTRO-FOLD; and 4), selected targets from CASP8. The extensive tests demonstrate that ICON can identify high-quality structures in each ensemble, regardless of the resolution of conformers. In a total of 1454 proteins, with an average of 1051 conformers per protein, the conformers selected by ICON are, on an average, in the top 3.5% of the conformers in the ensemble.

Distance dependent centroid to centroid force fields using high resolution decoys

Simplified force fields play an important role in protein structure prediction and de novo protein design by requiring less computational effort than detailed atomistic potentials. A side chain centroid based, distance dependent pairwise interaction potential has been developed. A linear programming based formulation was used in which non-native "decoy" conformers are forced to take a higher energy compared with the corresponding native structure. This model was trained on an enhanced and diverse protein set. High quality decoy structures were generated for approximately 1400 nonhomologous proteins using torsion angle dynamics along with restricted variations of the hydrophobic cores of the native structure. The resulting decoy set was used to train the model yielding two different side chain centroid based force fields that differ in the way distance dependence has been used to calculate energy parameters. These force fields were tested on an independent set of 148 test proteins with 500 decoy structures for each protein. The side chain centroid force fields were successful in correctly identifying approximately 86% native structures. The Z-scores produced by the proposed centroid-centroid distance dependent force fields improved compared with other distance dependent C(alpha)-C(alpha) or side chain based force fields.

Computational methods in protein structure prediction

This review presents the advances in protein structure prediction from the computational methods perspective. The approaches are classified into four major categories: comparative modeling, fold recognition, first principles methods that employ database information, and first principles methods without database information. Important advances along with current limitations and challenges are presented.

Toward full-sequence de novo protein design with flexible templates for human beta-defensin-2

In this article, we introduce and apply our de novo protein design framework, which observes true backbone flexibility, to the redesign of human beta-defensin-2, a 41-residue cationic antimicrobial peptide of the innate immune system. The flexible design templates are generated using molecular dynamics simulations with both Generalized Born implicit solvation and explicit water molecules. These backbone templates were employed in addition to the x-ray crystal structure for designing human beta-defensin-2. The computational efficiency of our framework was demonstrated with the full-sequence design of the peptide with flexible backbone templates, corresponding to the mutation of all positions except the native cysteines.

Ranking the factors that contribute to protein β-sheet folding

The formation of beta-sheet domains in proteins involves five energetically important factors: the formation of networks of hydrogen bonds and hydrophobic faces, and the residue propensities, or preferences, to be found at the edges of the beta-sheet, to adopt the extended conformation, and to make contact with other residues. These relative energy contributions define a potential energy function. Here, we show how optimizing this potential energy function reveals the formation of hydrophobic faces as the utmost factor. The potential energy function was optimized to minimize the Z-scores of the native topologies among the exhaustive sets of over 400 different beta-sheets. These results corroborate with experimental data that showed the environment of a protein is an important modulator of beta-sheet folding. The contact propensities were found to be the least important, which could explain the poor predictive power of beta-strand alignment methods based on pair-wise contact matrices.

Novel approach for alpha-helical topology prediction in globular proteins: generation of interhelical restraints

The protein folding problem represents one of the most challenging problems in computational biology. Distance constraints and topology predictions can be highly useful for the folding problem in reducing the conformational space that must be searched by deterministic algorithms to find a protein structure of minimum conformational energy. We present a novel optimization framework for predicting topological contacts and generating interhelical distance restraints between hydrophobic residues in alpha-helical globular proteins. It should be emphasized that since the model does not make assumptions about the form of the helices, it is applicable to all alpha-helical proteins, including helices with kinks and irregular helices. This model aims at enhancing the ASTRO-FOLD protein folding approach of Klepeis and Floudas (Journal of Computational Chemistry 2003;24:191-208), which finds the structure of global minimum conformational energy via a constrained nonlinear optimization problem. The proposed topology prediction model was evaluated on 26 alpha-helical proteins ranging from 2 to 8 helices and 35 to 159 residues, and the best identified average interhelical distances corresponding to the predicted contacts fell below 11 A in all 26 of these systems. Given the positive results of applying the model to several protein systems, the importance of interhelical hydrophobic-to-hydrophobic contacts in determining the folding of alpha-helical globular proteins is highlighted.

Large-scale prediction of disulphide bridges using kernel methods, two-dimensional recursive neural networks, and weighted graph matching

The formation of disulphide bridges between cysteines plays an important role in protein folding, structure, function, and evolution. Here, we develop new methods for predicting disulphide bridges in proteins. We first build a large curated data set of proteins containing disulphide bridges to extract relevant statistics. We then use kernel methods to predict whether a given protein chain contains intrachain disulphide bridges or not, and recursive neural networks to predict the bonding probabilities of each pair of cysteines in the chain. These probabilities in turn lead to an accurate estimation of the total number of disulphide bridges and to a weighted graph matching problem that can be addressed efficiently to infer the global disulphide bridge connectivity pattern. This approach can be applied both in situations where the bonded state of each cysteine is known, or in ab initio mode where the state is unknown. Furthermore, it can easily cope with chains containing an arbitrary number of disulphide bridges, overcoming one of the major limitations of previous approaches. It can classify individual cysteine residues as bonded or nonbonded with 87% specificity and 89% sensitivity. The estimate for the total number of bridges in each chain is correct 71% of the times, and within one from the true value over 94% of the times. The prediction of the overall disulphide connectivity pattern is exact in about 51% of the chains. In addition to using profiles in the input to leverage evolutionary information, including true (but not predicted) secondary structure and solvent accessibility information yields small but noticeable improvements. Finally, once the system is trained, predictions can be computed rapidly on a proteomic or protein-engineering scale. The disulphide bridge prediction server (DIpro), software, and datasets are available through www.igb.uci.edu/servers/psss.html.

Protein loop structure prediction with flexible stem geometries

The structure prediction of loops with flexible stem residues is addressed in this article. While the secondary structure of the stem residues is assumed to be known, the geometry of the protein into which the loop must fit is considered to be unknown in our methodology. As a consequence, the compatibility of the loop with the remainder of the protein is not used as a criterion to reject loop decoys. The loop structure prediction with flexible stems is more difficult than fitting loops into a known protein structure in that a larger conformational space has to be covered. The main focus of the study is to assess the precision of loop structure prediction if no information on the protein geometry is available. The proposed approach is based on (1) dihedral angle sampling, (2) structure optimization by energy minimization with a physically based energy function, (3) clustering, and (4) a comparison of strategies for the selection of loops identified in (3). Steps (1) and (2) have similarities to previous approaches to loop structure prediction with fixed stems. Step (3) is based on a new iterative approach to clustering that is tailored for the loop structure prediction problem with flexible stems. In this new approach, clustering is not only used to identify conformers that are likely to be close to the native structure, but clustering is also employed to identify far-from-native decoys. By discarding these decoys iteratively, the overall quality of the ensemble and the loop structure prediction is improved. Step (4) provides a comparative study of criteria for loop selection based on energy, colony energy, cluster density, and a hybrid criterion introduced here. The proposed method is tested on a large set of 3215 loops from proteins in the Pdb-Select25 set and to 179 loops from proteins from the Casp6 experiment.

Ab initio prediction of the three-dimensional structure of a de novo designed protein: A double-blind case study

Ab initio structure prediction and de novo protein design are two problems at the forefront of research in the fields of structural biology and chemistry. The goal of ab initio structure prediction of proteins is to correctly characterize the 3D structure of a protein using only the amino acid sequence as input. De novo protein design involves the production of novel protein sequences that adopt a desired fold. In this work, the results of a double-blind study are presented in which a new ab initio method was successfully used to predict the 3D structure of a protein designed through an experimental approach using binary patterned combinatorial libraries of de novo sequences. The predicted structure, which was produced before the experimental structure was known and without consideration of the design goals, and the final NMR analysis both characterize this protein as a 4-helix bundle. The similarity of these structures is evidenced by both small RMSD values between the coordinates of the two structures and a detailed analysis of the helical packing.

ASTRO-FOLD: a combinatorial and global optimization framework for Ab initio prediction of three-dimensional structures of proteins from the amino acid sequence

The field of computational biology has been revolutionized by recent advances in genomics. The completion of a number of genome projects, including that of the human genome, has paved the way toward a variety of challenges and opportunities in bioinformatics and biological systems engineering. One of the first challenges has been the determination of the structures of proteins encoded by the individual genes. This problem, which represents the progression from sequence to structure (genomics to structural genomics), has been widely known as the structure-prediction-in-protein-folding problem. We present the development and application of ASTRO-FOLD, a novel and complete approach for the ab initio prediction of protein structures given only the amino acid sequences of the proteins. The approach exhibits many novel components and the merits of its application are examined for a suite of protein systems, including a number of targets from several critical-assessment-of-structure-prediction experiments.

Hybrid global optimization algorithms for protein structure prediction: alternating hybrids

Hybrid global optimization methods attempt to combine the beneficial features of two or more algorithms, and can be powerful methods for solving challenging nonconvex optimization problems. In this paper, novel classes of hybrid global optimization methods, termed alternating hybrids, are introduced for application as a tool in treating the peptide and protein structure prediction problems. In particular, these new optimization methods take the form of hybrids between a deterministic global optimization algorithm, the alphaBB, and a stochastically based method, conformational space annealing (CSA). The alphaBB method, as a theoretically proven global optimization approach, exhibits consistency, as it guarantees convergence to the global minimum for twice-continuously differentiable constrained nonlinear programming problems, but can benefit from computationally related enhancements. On the other hand, the independent CSA algorithm is highly efficient, though the method lacks theoretical guarantees of convergence. Furthermore, both the alphaBB method and the CSA method are found to identify ensembles of low-energy conformers, an important feature for determining the true free energy minimum of the system. The proposed hybrid methods combine the desirable features of efficiency and consistency, thus enabling the accurate prediction of the structures of larger peptides. Computational studies for met-enkephalin and melittin, employing sequential and parallel computing frameworks, demonstrate the promise for these proposed hybrid methods.