Advances in vibrational configuration interaction theory - part 2: Fast screening of the correlation space

Zero-Point-Energy Driven Isotopic Exchange of the [H3O]- anion Probed by Mid-Infrared Action Spectroscopy

We present the first observation of vibrational transitions in the [H3O]- anion, an intermediate in the anion-molecule reaction of water, H2O, and hydride, H-, using a laser-induced isotopic H/D exchange reaction action spectroscopy scheme applied to anions. The observed bands are assigned as the fundamental and first overtone of the H2O-H- vibrational stretching mode, based on anharmonic calculations within the vibrational perturbation theory and vibrational configuration interaction. Although the D2O·D- species has the lowest energy, our experiments confirm the D2O·H- isotope to be a sink of the H/D exchange reaction. Ab initio calculations corroborate that the formation of D2O·H- is favored, as the zero-point-energy difference is larger between D2 and H2 than between D2O·H- and D2O·D-.

The Near-Sightedness of Many-Body Interactions in Anharmonic Vibrational Couplings

Couplings between vibrational motions are driven by electronic interactions, and these couplings carry special significance in vibrational energy transfer, multidimensional spectroscopy experiments, and simulations of vibrational spectra. In this investigation, the many-body contributions to these couplings are analyzed computationally in the context of clathrate-like alkali metal cation hydrates, including Cs+(H2O)20, Rb+(H2O)20, and K+(H2O)20, using both analytic and quantum-chemistry potential energy surfaces. Although the harmonic spectra and one-dimensional anharmonic spectra depend strongly on these many-body interactions, the mode-pair couplings were, perhaps surprisingly, found to be dominated by one-body effects, even in cases of couplings to low-frequency modes that involved the motion of multiple water molecules. The origin of this effect was traced mainly to geometric distortion within water monomers and cancellation of many-body effects in differential couplings, and the effect was also shown to be agnostic to the identity of the ion. These outcomes provide new understanding of vibrational couplings and suggest the possibility of improved computational methods for the simulation of infrared and Raman spectra.

Spectroscopic Identification of Trifluorosilylphosphinidene and Isomeric Phosphasilene and Silicon Trifluorophosphine Complex

The perfluorinated silylphosphinidene, F3SiP, in the triplet ground state is generated by the reaction of laser-ablated silicon atoms with PF3 in solid neon and argon matrices. The reactions proceed with the initial formation of a silicon trifluorophosphine complex, F3PSi, in the triplet ground state, and a more stable inserted phosphasilene, FPSiF2, in the singlet ground state upon deposition. The trifluorosilylphosphinidene was formed through F-migration reactions of FPSiF2 and F3PSi following a two-state mechanism under irradiation with visible light (λ = 470 nm) and full arc light (λ > 220 nm), respectively. High-level quantum-chemical methods support the identification of F3PSi, FPSiF2, and F3SiP by matrix-isolation IR spectroscopy.

From the Automated Calculation of Potential Energy Surfaces to Accurate Infrared Spectra

Advances in the development of quantum chemical methods and progress in multicore architectures in computer science made the simulation of infrared spectra of isolated molecules competitive with respect to established experimental methods. Although it is mainly the multidimensional potential energy surface that controls the accuracy of these calculations, the subsequent vibrational structure calculations need to be carefully converged in order to yield accurate results. As both aspects need to be considered in a balanced way, we focus on approaches for molecules of up to 12-15 atoms with respect to both parts, which have been automated to some extent so that they can be employed in routine applications. Alternatives to machine learning will be discussed, which appear to be attractive, as long as local regions of the potential energy surface are sufficient. The automatization of these methods is still in its infancy, and the generalization to molecules with large amplitude motions or molecular clusters is far from trivial, but many systems relevant for astrophysical studies are already in reach.

Comprehensive quantum chemical analysis of the (ro)vibrational spectrum of thiirane and its deuterated isotopologue

The (ro)vibrational spectra of thiirane, c-C2H4S, and its fully deuterated isotopologue, c-C2D4S, have been studied by means of vibrational configuration interaction theory, VCI, its incremental variant, iVCI, and subsequent variational rovibrational calculations, RVCI, which rely on multidimensional potential energy surfaces of coupled-cluster quality including up to four-mode coupling terms. Accurate geometrical parameters, fundamental vibrational transitions and first overtones, rovibrational spectra and rotational spectroscopic constants have been determined from these calculations and were compared with experimental results whenever available. A number of tentative misassignments in the vibrational spectra could be resolved and most results for the deuterated thiirane are high-level predictions, which may guide experiments to come. Besides this, a new implementation of infrared intensities within the iVCI framework has been tested for the transitions of the title compounds and are compared with results obtained from standard VCI calculations.

Pitfalls in the n-mode representation of vibrational potentials

Simulations of anharmonic vibrational motion rely on computationally expedient representations of the governing potential energy surface. The n-mode representation (n-MR)-effectively a many-body expansion in the space of molecular vibrations-is a general and efficient approach that is often used for this purpose in vibrational self-consistent field (VSCF) calculations and correlated analogues thereof. In the present analysis, a lack of convergence in many VSCF calculations is shown to originate from negative and unbound potentials at truncated orders of the n-MR expansion. For cases of strong anharmonic coupling between modes, the n-MR can both dip below the true global minimum of the potential surface and lead to effective single-mode potentials in VSCF that do not correspond to bound vibrational problems, even for bound total potentials. The present analysis serves mainly as a pathology report of this issue. Furthermore, this insight into the origin of VSCF non-convergence provides a simple, albeit ad hoc, route to correct the problem by "painting in" the full representation of groups of modes that exhibit these negative potentials at little additional computational cost. Somewhat surprisingly, this approach also reasonably approximates the results of the next-higher n-MR order and identifies groups of modes with particularly strong coupling. The method is shown to identify and correct problematic triples of modes-and restore SCF convergence-in two-mode representations of challenging test systems, including the water dimer and trimer, as well as protonated tropine.

Accelerating Anharmonic Spectroscopy Simulations via Local-Mode, Multilevel Methods

Ab initio computer simulations of anharmonic vibrational spectra provide nuanced insight into the vibrational behavior of molecules and complexes. The computational bottleneck in such simulations, particularly for ab initio potentials, is often the generation of mode-coupling potentials. Focusing specifically on two-mode couplings in this analysis, the combination of a local-mode representation and multilevel methods is demonstrated to be particularly symbiotic. In this approach, a low-level quantum chemistry method is employed to predict the pairwise couplings that should be included at the target level of theory in vibrational self-consistent field (and similar) calculations. Pairs that are excluded by this approach are "recycled" at the low level of theory. Furthermore, because this low-level pre-screening will eventually become the computational bottleneck for sufficiently large chemical systems, distance-based truncation is applied to these low-level predictions without substantive loss of accuracy. This combination is demonstrated to yield sub-wavenumber fidelity with reference vibrational transitions when including only a small fraction of target-level couplings; the overhead of predicting these couplings, particularly when employing distance-based, local-mode cutoffs, is a trivial added cost. This combined approach is assessed on a series of test cases, including ethylene, hexatriene, and the alanine dipeptide. Vibrational self-consistent field (VSCF) spectra were obtained with an RI-MP2/cc-pVTZ potential for the dipeptide, at approximately a 5-fold reduction in computational cost. Considerable optimism for increased accelerations for larger systems and higher-order couplings is also justified, based on this investigation.

Quantum chemical rovibrational analysis of aminoborane and its isotopologues

Aminoborane, H₂ NBH₂ and its isotopologues, H₂ N¹⁰ BH₂ , D₂ NBD₂ , and D₂ N¹⁰ BD₂ , have been studied by high-level ab initio methods. All calculations rely on multidimensional potential energy surfaces and dipole moment surfaces including high-order mode coupling terms, which have been obtained from electronic structure calculations at the level of explicitly correlated coupled-cluster theory, CCSD(T)-F12, or the distinguishable cluster approximation, DCSD. Subsequent vibrational structure calculations based on second-order vibrational perturbation theory, VPT2, and vibrational configuration interaction theory, VCI, were used to determine rotational constants, centrifugal distortion constants, vibrationally averaged geometrical parameters and (an)harmonic vibrational frequencies. The impact of core-correlation effects is discussed in detail. Rovibrational VCI calculations were used to simulate the gas phase spectra of these species and an in-depth analysis of the ν₇ band of aminoborane is provided. Color-coding is used to reveal the identity of the individual progressions of the rovibrational transitions for this particular mode.

Quantum-chemical calculation of two-dimensional infrared spectra using localized-mode VSCF/VCI

Computational protocols for the simulation of two-dimensional infrared (2D IR) spectroscopy usually rely on vibrational exciton models which require an empirical parameterization. Here, we present an efficient quantum-chemical protocol for predicting static 2D IR spectra that does not require any empirical parameters. For the calculation of anharmonic vibrational energy levels and transition dipole moments, we employ the localized-mode vibrational self-consistent field (L-VSCF)/vibrational configuration interaction (L-VCI) approach previously established for (linear) anharmonic theoretical vibrational spectroscopy [P. T. Panek and C. R. Jacob, ChemPhysChem 15, 3365-3377 (2014)]. We demonstrate that with an efficient expansion of the potential energy surface using anharmonic one-mode potentials and harmonic two-mode potentials, 2D IR spectra of metal carbonyl complexes and dipeptides can be predicted reliably. We further show how the close connection between L-VCI and vibrational exciton models can be exploited to extract the parameters of such models from those calculations. This provides a novel route to the fully quantum-chemical parameterization of vibrational exciton models for predicting 2D IR spectra.

Convergence of series expansions in rovibrational configuration interaction (RVCI) calculations

Rotational and rovibrational spectra are a key in astrophysical studies, atmospheric science, pollution monitoring, and other fields of active research. The ab initio calculation of such spectra is fairly sensitive with respect to a multitude of parameters and all of them must be carefully monitored in order to yield reliable results. Besides the most obvious ones, i.e., the quality of the multidimensional potential energy surface and the vibrational wavefunctions, it is the representation of the μ-tensor within the Watson Hamiltonian, which has a significant impact on the desired line lists or simulated spectra. Within this work, we studied the dependence of high-resolution rovibrational spectra with respect to the truncation order of the μ-tensor within the rotational contribution and the Coriolis coupling operator of the Watson operator. Moreover, the dependence of the infrared intensities of the rovibrational transitions on an n-mode expansion of the dipole moment surface has been investigated as well. Benchmark calculations are provided for thioformaldehyde, which has already served as a test molecule in other studies and whose rovibrational spectrum was found to be fairly sensitive. All calculations rely on rovibrational configuration interaction theory and the discussed high-order terms of the μ-tensor are a newly implemented feature, whose theoretical basics are briefly discussed.

On the vibrations of formic acid predicted from first principles

In this article, we review recent first principles, anharmonic studies on the molecular vibrations of gaseous formic acid in its monomer form. Transitions identified as fundamentals for both cis- and trans form reported in these studies are collected and supported by results from high-resolution experiments. Attention is given to the effect of coordinate coupling on the convergence of the computed vibrational states.

Calculation of absolute Raman scattering cross-sections using vibrational self-consistent field/vibrational configuration interaction wave functions

In the present study, the differential scattering cross-sections, depolarization ratios and Raman shifts of small molecular systems are obtained from configuration iteration wave functions of vibrational self-consistent field (VSCF) states. The transition polarizabilities were modeled using the Placzek approximation, neglecting those contributions not arising from the electric dipole mechanism. This theoretical approach is considered a good approximation for samples that absorb in the UV range if the excitation radiation falls in the visible region, as is the case of the molecules selected for the present study, namely: water, methane, and acetylene. Potential energy and electronic polarizability surfaces are calculated by the CCSD(T) and CC3 methods with aug-cc-p(C)V(T,Q,5)Z basis sets. The vibrational Hamiltonian includes the vibrational angular momentum contribution of the Watson kinetic energy operator. As expected, due to the variational nature of the VSCF and vibrational configuration interaction (VCI) methods, the Raman transition wavenumbers are substantially improved over the harmonic predictions. Surprisingly, the scattering cross-sections obtained using the harmonic approximation or the VSCF method better agrees with the experimental values than those cross-sections predicted using VCI wave functions. The more significant deviations of the VCI results from the experimental reference may be related to the significant uncertainties of the measured cross-sections. Still, it may also indicate that the VCI Raman transition moments may require a more accurate description of the electronic polarizability surface. Finally, the depolarization ratios calculated for H₂ O and C₂ D₂ using harmonic and VCI wave functions have similar accuracy, whereas, for C₂ H₂ and C₂ HD, the VCI results are more accurate.

Comparison of body definitions for incremental vibrational configuration interaction theory (iVCI)

Within incremental vibrational configuration interaction theory (iVCI), the vibrational state energy is determined by means of a many-body expansion, i.e., it is a sum of terms of increasing order, which allow for an embarrassingly parallel evaluation. The convergence of this expansion depends strongly on the definition of the underlying bodies, which essentially decompose the correlation space into fragments. The different definitions considered here comprise mode-based bodies, excitation level-based bodies, and energy-based bodies. An analysis of the convergence behavior revealed that accounting for resonances within these definitions is mandatory and leads to a substantial improvement of the convergence, that is, the expansions can be truncated at lower orders. Benchmark calculations and systematic comparisons of the different body definitions for a small set of molecules, i.e., ketene, ethene, and diborane, have been conducted to study the overall performance of these iVCI implementations with respect to accuracy and central processing unit time.

Efficient and Automated Quantum Chemical Calculation of Rovibrational Nonresonant Raman Spectra

An outline of a newly developed program for the simulation of rovibrational nonresonant Raman spectra is presented. This program is an extension of our recently developed code for rovibrational infrared spectra [J. Chem Phys. 152 (2020) 244104] and relies on vibrational wavefunctions from variational configuration interaction theory to allow for an almost fully automated calculation of such spectra in pure ab initio fashion. Due to efficient contraction schemes this program requires modest computational resources and it can be controlled by only a few lines of input. As the required polarizability surfaces are also computed in an automated fashion, this implementation enables the routine application to small molecules. For demonstrating its capabilities, benchmark calculations for water H216O are compared to reference data and spectra for the beryllium dihydride dimer, Be2H4 (D2h), are predicted. The inversion symmetry of the D2h systems lead to complementary infrared and Raman spectra, which are needed both for a comprehensive investigation of this system.