An eco-friendly separation-based framework for quantitative determination and purity testing of an antihypertensive ternary pharmaceutical formulation

Designing new, verified methodologies with a focus on sustainability, analytical efficiency, simplicity, and the environment has become a major priority for pharmaceutical quality control units. In this way, sustainable and selective separation-based methodologies were designed and validated for the concurrent estimation of amiloride hydrochloride (AML), hydrochlorothiazide (HCT) and timolol maleate (TIM) in their fixed dose formulation (Moducren^® Tablets) along with hydrochlorothiazide potential impurities, salamide (DSA) and chlorothiazide (CT). The first method is a high performance thin layer chromatographic method (HPTLC-densitometry). The first developed method employed silica gel HPTLC F₂₅₄ plates as stationary phase using a chromatographic developing system composed of ethyl acetate-ethanol-water-ammonia (8.5:1:0.5:0.3, by volume). The separated drug bands were densito-metrically measured at 220.0 nm for AML, HCT, DSA and CT and at 295.0 nm for TIM. The linearity was assessed over a wide concentration range, 0.5-10 µg/band, 1.0-16.0 µg/band and 1.0-14 µg/band for AML, HCT and TIM, in order and 0.05-1.0 µg/band for each of DSA and CT. The second method is capillary zone electrophoresis (CZE). The electrophoretic separation was achieved using background electrolyte (BGE), borate buffer 40.0 mM with pH 9.0 ± 0.2, at applied voltage of + 15 kV with on-column diode array detection at 200.0 nm. The method linearity was reached over the concentration range of 20.0-160.0 µg/mL, 10.0-200.0 µg/mL, 10.0-120.0 µg/mL for AML, HCT and TIM, respectively and 10.0-100.0 µg/mL for DSA. The suggested methods were optimized to achieve best performance and validated agreeing with the ICH guidelines. Assessment of methods' sustainability and greenness was performed using different greenness assessment tools.

Simultaneous spectrofluorometric analysis of tablets containing hydrochlorothiazide combined with timolol maleate or amiloride hydrochloride

Green and sensitive spectrofluorometric methods have been developed and validated for the determination of timolol maleate (TML)/hydrochlorothiazide (HCT) and amiloride hydrochloride (AMH)/hydrochlorothiazide in tablets. The proposed spectrofluorometric procedures were found to be linear in the range of 4-12, 5-35 and 0.025-0.2 mg L-1 for HCT, TML and AMH, resp. The excitation and emission wavelengths for HCT, TML and AMH at room temperature were 270 and 375, 295 and 435, 330 and 415 nm, resp. The methods were validated with respect to ICH guidelines. The AMH showed higher sensitivity with lower values of LOD and LOQ values compared to HCT and TML. The proposed methods were applied to two pharmaceutical formulations; the method for HCT and AMH has proven as reliable assaying method, whereas the method for TML, when combined with HCT, is applicable to screening semi-quantitative analyses.

Fast separation and quantification of three anti-glaucoma drugs by high-performance liquid chromatography UV detection

In this study, a simple and accurate high-performance liquid chromatography method was developed and validated for fast separation of three anti-glaucoma drugs: timolol maleate (TM), brimonidine tartrate (BM), and latanoprost (LP). Separation of the three drugs was achieved in < 6 minutes using a BDS Hypersil phenyl column and a mobile phase consisting of acetonitrile: 25mM phosphate buffer, pH 4.0 (50: 50, v/v) at 1.2 mL/min with UV detection at 210 nm. The method was linear over the concentration ranges of 5.0–200.0 μg/mL, 2.0–80.0 μg/mL and 1.0–25.0 μg/mL with lower detection limits of 0.21 μg/mL, 0.10 μg/mL and 0.11 μg/mL for TM, BM and LP, respectively. The method was applied for the determination of two fixed-dose combination eye drops for the treatment of glaucoma, containing TM together with either BM or LP. Commercial samples of single-ingredient ophthalmic solutions containing the studied drugs were also successfully analyzed. The results obtained by the proposed method were favorably compared with those obtained by the comparison methods using Student’s t test and the variance ratio F test.

New simple spectrophotometric method for determination of the binary mixtures (atorvastatin calcium and ezetimibe; candesartan cilexetil and hydrochlorothiazide) in tablets

A new simple spectrophotometric method was developed for the determination of binary mixtures without prior separation. The method is based on the generation of ratio spectra of compound X by using a standard spectrum of compound Y as a divisor. The peak to trough amplitudes between two selected wavelengths in the ratio spectra are proportional to concentration of X without interference from Y. The method was demonstrated by determination of two drug combinations. The first consists of the two antihyperlipidemics: atorvastatin calcium (ATV) and ezetimibe (EZE), and the second comprises the antihypertensives: candesartan cilexetil (CAN) and hydrochlorothiazide (HCT). For mixture 1, ATV was determined using 10 μg/mL EZE as the divisor to generate the ratio spectra, and the peak to trough amplitudes between 231 and 276 nm were plotted against ATV concentration. Similarly, by using 10 μg/mL ATV as divisor, the peak to trough amplitudes between 231 and 276 nm were found proportional to EZE concentration. Calibration curves were linear in the range 2.5-40 μg/mL for both drugs. For mixture 2, divisor concentration was 7.5 μg/mL for both drugs. CAN was determined using its peak to trough amplitudes at 251 and 277 nm, while HCT was estimated using the amplitudes between 251 and 276 nm. The measured amplitudes were linearly correlated to concentration in the ranges 2.5-50 and 1-30 μg/mL for CAN and HCT, respectively. The proposed spectrophotometric method was validated and successfully applied for the assay of both drug combinations in several laboratory-prepared mixtures and commercial tablets.