Development of Simple Electrochemical Sensor for Selective Determination of Methadone in Biological Samples Using Multi-walled Carbon Nanotubes Modified Pencil Graphite Electrode

Recent Developments in the Sensitive Electrochemical Assay of Common Opioid Drugs

Opioids are a class of drugs used to treat moderate to severe pain and have short-term adverse effects. Nevertheless, they are considered necessary for pain management. However, well-known hazards are connected with an opioid prescription, such as overuse, addiction, and overdose deaths. For example, the death rate from opioid analgesic poisoning in the USA approximately doubled, owing to the overuse and addiction of opioid analgesics. Also, opioids are a very important group of analytes in forensic chemistry, so it is necessary to use reliable, fast, and sensitive analytical tools to determine opioid analgesics. This review focuses on the opioid overdose crisis, the properties of commonly used opioid drugs, their mechanism, effects, and some chromatographic and spectroscopic detection methods are explained briefly. Then most essentially recent developments covering the last ten years in the sensitive electrochemical methods of common opioid analgesics, their innovations and features, and future research directions are presented.

Graphene-Based Electrochemical Sensors for Psychoactive Drugs

Sensors developed from nanomaterials are increasingly used in a variety of fields, from simple wearable or medical sensors to be used at home to monitor health, to more complicated sensors being used by border customs or aviation industries. In recent times, nanoparticle-based sensors have begun to revolutionize drug-detection techniques, mainly due to their affordability, ease of use and portability, compared to conventional chromatography techniques. Thin graphene layers provide a significantly high surface to weight ratio compared to other nanomaterials, a characteristic that has led to the design of more sensitive and reliable sensors. The exceptional properties of graphene coupled with its potential to be tuned to target specific molecules have made graphene-based sensors one of the most popular and well-researched sensing materials of the past two decades with applications in environmental monitoring, medical diagnostics, and industries. Here, we present a review of developments in the applications of graphene-based sensors in sensing drugs such as cocaine, morphine, methamphetamine, ketamine, tramadol and so forth in the past decade. We compare graphene sensors with other sensors developed from ultrathin two-dimensional materials, such as transition-metal dichalcogenides, hexagonal boron nitrate, and MXenes, to measure drugs directly and indirectly, in various samples.

Advances of Drugs Electroanalysis Based on Direct Electrochemical Redox on Electrodes: A Review

The strong development of mankind is inseparable from the proper use of drugs, and the electroanalytical research of drugs occupies an important position in the field of analytical chemistry. This review mainly elaborates the research progress of drugs electroanalysis based on direct electrochemical redox on various electrodes for the recent decade from 2011 to 2021. At first, we summarize some frequently used electrochemical data processing and electrochemical mechanism research derivation methods in the literature. Then, according to the drug therapeutic and application/usage purposes, the research progress of drugs electrochemical analysis is classified and discussed, where we focus on drugs electrochemical reaction mechanism. At the same time, the comparisons of electrochemical sensing performance of the drugs on various electrodes from recent studies are listed, so that readers can more intuitively compare and understand the electroanalytical sensing performance of each modified electrode for each of the drug. Finally, this review discusses the shortcomings and prospects of the drugs electroanalysis based on direct electrochemical redox research.

Progress in pretreatment of methadone: an update since 2015

Methadone, a µ-opioid receptor agonist, is widely used in pain-relieving and treating opioid dependence. If not strictly controlled, as an opioid substitute, it can lead to abuse and cause more severe withdrawal responses than heroin. Also, overdose or abuse of this drug in clinical use may provide severe side effects such as apnea, circulatory collapse, cardiac arrest, and even death. For these reasons, simple, rapid, and efficient methods have been developed for the pretreatment of methadone. This review presents a comprehensive conclusion of the pretreatment methods used for methadone in various sample matrices, focusing on the developments since 2015. Traditionally used pretreatment methods like solid-phase extraction and liquid-liquid extraction are discussed and newly developed methods like solid-phase microextraction and liquid-liquid microextraction along with new materials applied are focused.

Recent Developments in Voltammetric Analysis of Pharmaceuticals Using Disposable Pencil Graphite Electrodes

The even growing production of both well-known and new derivatives with pharmaceutical action involves the need for developing facile and reliable methods for the analysis of these compounds. Among the widely used instrumental techniques, the electrochemical ones are probably the simplest and the most rapid, also having good performance characteristics. However, the key tool in electroanalysis is the working electrode. Due to the inherent electrochemical and economic advantages of the pencil graphite electrode (PGE), the interest in its applicability in the analysis of different analytes has continuously increased in recent years. Thus, this paper aims to review the scientific reports published in the last 10 years on the use of the disposable eco- and user-friendly PGEs in the electroanalysis of compounds of pharmaceutical importance in different matrices. The PGE characteristics and designs (bare or modified with various types of materials), along with their applications and performance parameters (e.g., linear range, limit of detection, and reproducibility), will be discussed, and their advantages and limitations will be critically emphasized.

Electrochemically activated pencil lead electrode as a sensitive voltammetric sensor to determine gallic acid

An electrochemical sensor for the determination of some polyphenolic compounds such as Gallic acid (GA) and Galloyl esters was developed using the activated pencil lead electrode (APLE). At first, a study has been made of the optimum conditions for electrochemical activation of the pencil lead electrode. Potentiodynamic and potentiostatic strategies were investigated for activation of the pencil lead electrode and the results show that the potentiodynamic pretreatment gives better performance toward measurement of the polyphenolic compounds. Electrochemical properties of GA were investigated using chronoamperometry and cyclic voltammetry; and some thermodynamic and kinetic variables such as α, n _α, and D were calculated. Sensitive differential pulse voltammetry (DPV) technique was applied for the determination of Gallic acid and Galloyl esters in different samples. Enhanced oxidation peak currents of Gallic acid were observed at APLE when compared with non-activated PLE. The calibration graph has two linear ranges of 0.49-24.3 µM and 0.07-0.83 mM, and the obtained limit of detection for S/N = 3 was 0.25 µM. Adsorptive stripping differential pulse voltammetry (AdSDPV) was also conducted to determine Gallic acid and Galloyl esters in sub-micromolar concentration range. Using the AdSDPV method, the limit of detection was improved and calculated to be 5.2 nM. The proposed method was successfully applied for quantification of the total concentration of Gallic acid and Galloyl esters in a variety of real samples such as black and green tea, and mango juice samples, and desirable recovery values indicated the good accuracy of the developed sensor.

An innovative highly sensitive electrochemical sensor based on modified electrode with carbon quantum dots and multiwall carbon nanotubes for determination of methadone hydrochloride in real samples

In the present work, to enhance the properties of a pencil graphite electrode (PGE), highly functionalized carbon quantum dots (CQDs) were synthesized and mixed with multiwall carbon nanotubes (MWCNTs) as novel modifiers for the preparation of working electrodes. These modifiers exhibited unique characteristics owing to the fascinating and well-defined properties of the CQD-MWCNT nanocomposite, including high surface to volume ratio, high conductivity, high stability and excellent electrocatalytic activity. Consequently, a modified pencil graphite electrode based on poly (diallyldimethylammonium chloride) (PDDA)/MWCNT/CQD was used to monitor the oxidation signals of methadone hydrochloride. Notably, field emission scanning electron microscopy (FE-SEM) was used to characterize the morphology and features of the different modifiers on the electrode surface. The proposed sensor was characterized via electrochemical studies including differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy (EIS). Under the optimum experimental conditions, the current response and concentration of methadone exhibited a linear relationship in the range of 0.1-225 μM with a detection limit of 0.03 μM. Furthermore, this sensor was successfully applied to determine methadone in human urine and plasma samples.

Simultaneous determination of methadone and morphine at a modified electrode with 3D β-MnO2 nanoflowers: application for pharmaceutical sample analysis

The present research synthesized manganese dioxide nano-flowers (β-MnO₂-NF) via a simplified technique for electro-catalytic utilization. Moreover, morphological characteristics and X-ray analyses showed Mn in the oxide form with β-type crystallographic structure. In addition, the research proposed a new efficient electro-chemical sensor to detect methadone at the modified glassy carbon electrode (β-MnO₂-NF/GCE). It has been found that oxidizing methadone is irreversible and shows a diffusion controlled procedure at the β-MnO₂-NF/GCE. Moreover, β-MnO₂-NF/GCE was considerably enhanced in the anodic peak current of methadone related to the separation of morphine and methadone overlapping voltammetric responses with probable difference of 510 mV. In addition, a linear increase has been observed between the catalytic peak currents gained by the differential pulse voltammetry (DPV) of morphine and methadone and their concentrations in the range between 0.1–200.0 μM and 0.1–250.0 μM, respectively. Furthermore, the limits of detection (LOD) for methadone and morphine were found to be 5.6 nM and 8.3 nM, respectively. It has been found that our electrode could have a successful application for detecting methadone and morphine in the drug dose form, urine, and saliva samples. Thus, this condition demonstrated that β-MnO₂-NF/GCE displays good analytical performances for the detection of methadone.

Electrochemical sensor based on β-MnO₂ nanoflower-modified glassy carbon electrode for the simultaneous detection of methadone and morphine was fabricated.

Electrochemical carbon based nanosensors: A promising tool in pharmaceutical and biomedical analysis

Nanotechnology has become very popular in the sensor fields in recent times. It is thought that the utilization of such technologies, as well as the use of nanosized materials, could well have beneficial effects for the performance of sensors. Nano-sized materials have been shown to have a number of novel and interesting physical and chemical properties. Low-dimensional nanometer-sized materials and systems have defined a new research area in condensed-matter physics within past decades. Apart from the aforesaid categories of materials, there exist various materials of different types for fabricating nanosensors. Carbon is called as a unique element, due to its magnificent applications in many areas. Carbon is an astonishing element that can be found many forms including graphite, diamond, fullerenes, and graphene. This review provides an overview of some of the important and recent developments brought about by the application of carbon based nanostructures to nanotechnology for both chemical and biological sensor development and their application in pharmaceutical and biomedical area.

Pencil Graphite Electrodes: A Versatile Tool in Electroanalysis

Due to their electrochemical and economical characteristics, pencil graphite electrodes (PGEs) gained in recent years a large applicability to the analysis of various types of inorganic and organic compounds from very different matrices. The electrode material of this type of working electrodes is constituted by the well-known and easy commercially available graphite pencil leads. Thus, PGEs are cheap and user-friendly and can be employed as disposable electrodes avoiding the time-consuming step of solid electrodes surface cleaning between measurements. When compared to other working electrodes PGEs present lower background currents, higher sensitivity, good reproducibility, and an adjustable electroactive surface area, permitting the analysis of low concentrations and small sample volumes without any deposition/preconcentration step. Therefore, this paper presents a detailed overview of the PGEs characteristics, designs and applications of bare, and electrochemically pretreated and chemically modified PGEs along with the corresponding performance characteristics like linear range and detection limit. Techniques used for bare or modified PGEs surface characterization are also reviewed.

Photoelectrochemical glucose biosensor based on a dehydrogenase enzyme and NAD+/NADH redox couple using a quantum dot modified pencil graphite electrode

A simple, disposable and economical modified electrode was prepared by electrodeposition of hybrid quantum dots onto a pencil graphite electrode surface and immobilization of glucose dehydrogenase onto the quantum dot modified electrode.