Constructing Bipolar Dual-Active Sites through High-Entropy-Induced Electric Dipole Transition for Decoupling Oxygen Redox

It remains a significant challenge to construct active sites to break the trade-off between oxidation and reduction processes occurring in battery cathodes with conversion mechanism, especially for the oxygen reduction and evolution reactions (ORR/OER) involved in the zinc-air batteries (ZABs). Here, using a high-entropy-driven electric dipole transition strategy to activate and stabilize the tetrahedral sites is proposed, while enhancing the activity of octahedral sites through orbital hybridization in a FeCoNiMnCrO spinel oxide, thus constructing bipolar dual-active sites with high-low valence states, which can effectively decouple ORR/OER. The FeCoNiMnCrO high-entropy spinel oxide with severe lattice distortion, exhibits a strong 1s→4s electric dipole transition and intense t2g(Co)/eg(Ni)-2p(OL) orbital hybridization that regulates the electronic descriptors, eg and t2g, which leads to the formation of low-valence Co tetrahedral sites (Coth) and high-valence Ni octahedral sites (Nioh), resulting in a higher half-wave potential of 0.87 V on Coth sites and a lower overpotential of 0.26 V at 10 mA cm-2 on Nioh sites as well as a superior performance of ZABs compared to low/mild entropy spinel oxides. Therefore, entropy engineering presents a distinctive approach for designing catalytic sites by inducing novel electromagnetic properties in materials across various electrocatalytic reactions, particularly for decoupling systems.

Nanoscale Metal Particle Modified Single-Atom Catalyst: Synthesis, Characterization, and Application

Single-atom catalysts (SACs) have attracted considerable attention in heterogeneous catalysis because of their well-defined active sites, maximum atomic utilization efficiency, and unique unsaturated coordinated structures. However, their effectiveness is limited to reactions requiring active sites containing multiple metal atoms. Furthermore, the loading amounts of single-atom sites must be restricted to prevent aggregation, which can adversely affect the catalytic performance despite the high activity of the individual atoms. The introduction of nanoscale metal particles (NMPs) into SACs (NMP-SACs) has proven to be an efficient approach for improving their catalytic performance. A comprehensive review is urgently needed to systematically introduce the synthesis, characterization, and application of NMP-SACs and the mechanisms behind their superior catalytic performance. This review first presents and classifies the different mechanisms through which NMPs enhance the performance of SACs. It then summarizes the currently reported synthetic strategies and state-of-the-art characterization techniques of NMP-SACs. Moreover, their application in electro/thermo/photocatalysis, and the reasons for their superior performance are discussed. Finally, the challenges and perspectives of NMP-SACs for the future design of advanced catalysts are addressed.

First-Row Transition Metals for Catalyzing Oxygen Redox

Rechargeable zinc-air batteries are widely recognized as a highly promising technology for energy conversion and storage, offering a cost-effective and viable alternative to commercial lithium-ion batteries due to their unique advantages. However, the practical application and commercialization of zinc-air batteries are hindered by the sluggish kinetics of the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Recently, extensive research has focused on the potential of first-row transition metals (Mn, Fe, Co, Ni, and Cu) as promising alternatives to noble metals in bifunctional ORR/OER electrocatalysts, leveraging their high-efficiency electrocatalytic activity and excellent durability. This review provides a comprehensive summary of the recent advancements in the mechanisms of ORR/OER, the performance of bifunctional electrocatalysts, and the preparation strategies employed for electrocatalysts based on first-row transition metals in alkaline media for zinc-air batteries. The paper concludes by proposing several challenges and highlighting emerging research trends for the future development of bifunctional electrocatalysts based on first-row transition metals.

Confinement Accelerates Water Oxidation Catalysis: Evidence from In Situ Studies

Basic insight into the structural evolution of electrocatalysts under operating conditions is of substantial importance for designing water oxidation catalysts. The first-row transition metal-based catalysts present state-of-the-art oxygen evolution reaction (OER) performance under alkaline conditions. Apparently, confinement has become an exciting strategy to boost the performance of these catalysts. The van der Waals (vdW) gaps of transition metal dichalcogenides are acknowledged to serve as a suitable platform to confine the first-row transition metal catalysts. This study focuses on confining Ni(OH)2 nanoparticle in the vdW gaps of 2D exfoliated SnS2 (Ex-SnS2 ) to accelerate water oxidation and to guarantee long term durability in alkaline solutions. The trends in oxidation states of Ni are probed during OER catalysis. The in situ studies confirm that the confined system produces a favorable environment for accelerated oxygen gas evolution, whereas the un-confined system proceeds with a relatively slower kinetics. The outstanding OER activity and excellent stability, with an overpotential of 300 mV at 100 mA cm-2 and Tafel slope as low as 93 mV dec-1 results from the confinement effect. This study sheds light on the OER mechanism of confined catalysis and opens up a way to develop efficient and low-cost electrocatalysts.

Enhanced membraneless fuel cells by electrooxidation of ethylene glycol with a nanostructured cobalt metal catalyst

The advancement of effective and long-lasting electrocatalysts for energy storage devices is crucial to reduce the impact of the energy crisis. In this study, a two-stage reduction process was used to synthesize carbon-supported cobalt alloy nanocatalysts with varying atomic ratios of cobalt, nickel and iron. The formed alloy nanocatalysts were investigated using energy-dispersive X-ray spectroscopy, X-ray diffraction, and transmission electron microscopy to determine their physicochemical characterization. According to XRD results, Cobalt-based alloy nanocatalysts form a face-centered cubic solid solution pattern, illustrating thoroughly mixed ternary metal solid solutions. Transmission electron micrographs also demonstrated that samples of carbon-based cobalt alloys displayed homogeneous dispersion at particle sizes ranging from 18 to 37 nm. Measurements of cyclic voltammetry, linear sweep voltammetry, and chronoamperometry revealed that iron alloy samples exhibited much greater electrochemical activity than non-iron alloy samples. The alloy nanocatalysts were evaluated as anodes for the electrooxidation of ethylene glycol in a single membraneless fuel cell to assess their robustness and efficiency at ambient temperature. Remarkably, in line with the results of cyclic voltammetry and chronoamperometry, the single-cell test showed that the ternary anode works better than its counterparts. The significantly higher electrochemical activity was observed for alloy nanocatalysts containing iron than for non-iron alloy catalysts. Iron stimulates nickel sites to oxidize cobalt to cobalt oxyhydroxides at lower over-potentials, which contributes to the improved performance of ternary alloy catalysts containing iron.

Large-scale sonochemical fabrication of a Co3O4-CoFe2O4@MWCNT bifunctional electrocatalyst for enhanced OER/HER performances

Herein, we have prepared a mixed-phase Co₃O₄-CoFe₂O₄@MWCNT nanocomposite through a cheap, large-scale, and facile ultrasonication route followed by annealing. The structural, morphological, and functional group analyses of the synthesized catalysts were performed by employing various characterization approaches such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM). The resultant samples were tested for bifunctional electrocatalytic activity through various electrochemical techniques: cyclic voltammetry (CV), linear sweep voltammetry (LSV), and electrochemical impedance spectroscopy (EIS). The prepared Co₃O₄-CoFe₂O₄@MWCNT nanocomposite achieved a very high current density of 100 mA cm^-2 at a lower (290 mV and 342 mV) overpotential (vs. RHE) and a smaller (166 mV dec^-1 and 138 mV dec^-1) Tafel slope in the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), respectively, compared to Co₃O₄-CoFe₂O₄. The excellent electrochemical activity of the as-prepared electrocatalyst was attributed to the uniform incorporation of Co₃O₄-CoFe₂O₄ over MWCNTs which provides high redox active sites, a greater surface area, better conductivity, and faster charge mobility. Furthermore, the enhanced electrochemical active surface, low charge-transfer resistance (R_ct), and higher exchange current density (J₀) of the Co₃O₄-CoFe₂O₄@MWCNT ternary composite are attributed to its superior behavior as a bifunctional electrocatalyst. Conclusively, this study demonstrates a novel and large-scale synthesis approach for bifunctional electrocatalysts with a high aspect ratio and abundance of active sites for high-potential energy applications.

Carbon cloth supporting spinel CuMn0.5Co2O4 nanoneedles with the regulated electronic structure by multiple metal elements as catalysts for efficient oxygen evolution reaction

Developing transition metal oxide catalysts to replace the noble metal oxide catalysts for efficient oxygen evolution reaction (OER) is essential to promote the practical application of water splitting. Herein, we designed and constructed the carbon cloth (CC) supporting spinel CuMn_0.5Co₂O₄ nanoneedles with regulated electronic structure by multiple metal elements with variable chemical valences in the spinel CuMn_0.5Co₂O₄. The carbon cloth not only provided good conductivity for the catalytic reaction but also supported the well-standing spinel CuMn_0.5Co₂O₄ nanoneedles arrays with a large special surface area. Meanwhile, the well-standing nanoneedles arrays and mesoporous structure of CuMn_0.5Co₂O₄ nanoneedles enhanced their wettability and facilitated access for electrolyte to electrochemical catalysis. Besides, the regulated electronic structure and generated oxygen vacancies of CuMn_0.5Co₂O₄/CC by multiple metal elements improved the intrinsic catalytic activity and the durability of OER activity. Profiting from these merits, the CuMn_0.5Co₂O₄/CC electrode exhibited superior OER activity with an ultralow overpotential of 189 mV at the current density of 10 mA⋅cm^-2 and a smaller Tafel slope of 64.1 mV⋅dec^-1, which was competitive with the noble metal oxides electrode. And the CuMn_0.5Co₂O₄/CC electrode also exhibited long-term durability for OER with 95.3% of current retention after 1000 cycles. Therefore, the competitive OER activity and excellent cycling durability suggested that the CuMn_0.5Co₂O₄/CC electrode is a potential candidate catalyst for efficient OER.

In Situ Reconstructed Mo-doped Amorphous FeOOH Boosts the Oxygen Evolution Reaction

Developing a fast and highly active oxygen evolution reaction (OER) catalyst to change energy kinetics technology is essential for making clean energy. Herein, we prepare three-dimensional (3D) hollow Mo-doped amorphous FeOOH (Mo-FeOOH) based on the precatalyst MoS₂ /FeC₂ O₄ via in situ reconstruction strategy. Mo-FeOOH exhibits promising OER performance. Specifically, it has an overpotential of 285 mV and a durability of 15 h at 10 mA cm^-2 . Characterizations indicate that Mo was included inside the FeOOH lattice, and it not only modifies the electronic energy levels of FeOOH but also effectively raises the inherent activity of FeOOH for OER. Additionally, in situ Raman analysis indicates that FeC₂ O₄ gradually transforms into the FeOOH active site throughout the OER process. This study provides ideas for designing in situ reconstruction strategies to prepare heteroatom doping catalysts for high electrochemical activity.

Synthesis of amorphous trimetallic PdCuNiP nanoparticles for enhanced OER

Metal phosphides with multi-element components and amorphous structure represent a novel kind of electrocatalysts for promising activity and durability towards the oxygen evolution reaction (OER). In this work, a two-step strategy, including alloying and phosphating processes, is reported to synthesize trimetallic amorphous PdCuNiP phosphide nanoparticles for efficient OER under alkaline conditions. The synergistic effect between Pd, Cu, Ni, and P elements, as well as the amorphous structure of the obtained PdCuNiP phosphide nanoparticles, would boost the intrinsic catalytic activity of Pd nanoparticles towards a wide range of reactions. These obtained trimetallic amorphous PdCuNiP phosphide nanoparticles exhibit long-term stability, nearly a 20-fold increase in mass activity toward OER compared with the initial Pd nanoparticles, and 223 mV lower in overpotential at 10 mA cm^-2. This work not only provides a reliable synthetic strategy for multi-metallic phosphide nanoparticles, but also expands the potential applications of this promising class of multi-metallic amorphous phosphides.

Facile Electron Transfer in Atomically Coupled Heterointerface for Accelerated Oxygen Evolution

An efficient and cost-effective approach for the development of advanced catalysts has been regarded as a sustainable way for green energy utilization. The general guideline to design active and efficient catalysts for oxygen evolution reaction (OER) is to achieve high intrinsic activity and the exposure of more density of the interfacial active sites. The heterointerface is one of the most attractive ways that plays a key role in electrochemical water oxidation. Herein, atomically cluster-based heterointerface catalysts with strong metal support interaction (SMSI) between WMn₂ O₄ and TiO₂ are designed. In this case, the WMn₂ O₄ nanoflakes are uniformly decorated by TiO₂ particles to create electronic effect on WMn₂ O₄ nanoflakes as confirmed by X-ray absorption near edge fine structure. As a result, the engineered heterointerface requires an OER onset overpotential as low as 200 mV versus reversible hydrogen electrode, which is stable for up to 30 h of test. The outstanding performance and long-term durability are due to SMSI, the exposure of interfacial active sites, and accelerated reaction kinetics. To confirm the synergistic interaction between WMn₂ O₄ and TiO₂ , and the modification of the electronic structure, high-resolution transmission electron microscopy (HR-TEM), X-ray photoemission spectroscopy (XPS), and X-ray absorption spectroscopy (XAS) are used.

Hypercrosslinked polymer-mediated fabrication of binary metal phosphide decorated spherical carbon as an efficient and durable bifunctional electrocatalyst for rechargeable Zn-air batteries

Bifunctional oxygen catalysts with excellent catalytic activity and durability towards both oxygen reduction and oxygen evolution reactions (ORR/OER) are pivotal for long-term rechargeable Zn-air batteries. Herein, we report a spherical carbon decorated with FeP and CoP nanoparticles (denoted as FeCoP/NPC) as an ORR/OER bifunctional electrocatalyst for rechargeable Zn-air batteries. HCTCz@Fe/Co-PA is first produced by the modification of phytic acid (PA) onto (into) a porous cross-linked polymeric sphere of poly(bis(N-carbazolyl)-1,2,4,5-tetrazine) (HCTCz), followed by chelating with metal ions (i.e., Fe³⁺ and Co²⁺). The subsequent pyrolysis yields FeCoP/NPC, which shows prominent activity and reliability for the ORR and OER due primarily to the synergistic effect of FeP and CoP active sites and N/P co-doped carbon. The aqueous Zn-air battery assembled with FeCoP/NPC provides high specific capacity and peak power density. Notably, the constructed Zn-air battery can be repetitively charged and discharged for 1200 h at 5 mA cm^-2. In addition, a flexible solid-state Zn-air battery made from FeCoP/NPC exhibits a power density of 74 mW cm^-2 and repeatedly works for 90 h at 2 mA cm^-2. This work opens up an avenue for the preparation of highly efficient bifunctional electrocatalysts for Zn-air batteries considering the extensive N-rich polymer precursors and various metal phosphide nanoparticles.

Recent Progress of Non-Noble Metal Catalysts for Oxygen Electrode in Zn-Air Batteries: A Mini Review

Oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) play crucial roles in energy conversion and storage devices. Particularly, the bifunctional ORR/OER catalysts are core components in rechargeable metal–air batteries, which have shown great promise in achieving "carbon emissions peak and carbon neutrality" goals. However, the sluggish ORR and OER kinetics at the oxygen cathode significantly hinder the performance of metal–air batteries. Although noble metal-based catalysts have been widely employed in accelerating the kinetics and improving the bifunctionality, their scarcity and high cost have limited their deployment in the market. In this review, we will discuss the ORR and OER mechanisms, propose the principles for bifunctional electrocatalysts design, and present the recent progress of the state-of-the-art bifunctional catalysts, with the focus on non-noble metal-based materials to replace the noble metal catalysts in Zn–air batteries. The perspectives for the future R&D of bifunctional electrocatalysts will be provided toward high-performance Zn–air batteries at the end of this paper.

Lewis Acid Site Assisted Bifunctional Activity of Tin Doped Gallium Oxide and Its Application in Rechargeable Zn-Air Batteries

The enhanced safety, superior energy, and power density of rechargeable metal-air batteries make them ideal energy storage systems for application in energy grids and electric vehicles. However, the absence of a cost-effective and stable bifunctional catalyst that can replace expensive platinum (Pt)-based catalyst to promote oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) at the air cathode hinders their broader adaptation. Here, it is demonstrated that Tin (Sn) doped β-gallium oxide (β-Ga₂ O₃ ) in the bulk form can efficiently catalyze ORR and OER and, hence, be applied as the cathode in Zn-air batteries. The Sn-doped β-Ga₂ O₃ sample with 15% Sn (Sn_{x =0.15} -Ga₂ O₃ ) displayed exceptional catalytic activity for a bulk, non-noble metal-based catalyst. When used as a cathode, the excellent electrocatalytic bifunctional activity of Sn_{x =0.15} -Ga₂ O₃ leads to a prototype Zn-air battery with a high-power density of 138 mW cm^-2 and improved cycling stability compared to devices with benchmark Pt-based cathode. The combined experimental and theoretical exploration revealed that the Lewis acid sites in β-Ga₂ O₃ aid in regulating the electron density distribution on the Sn-doped sites, optimize the adsorption energies of reaction intermediates, and facilitate the formation of critical reaction intermediate (O*), leading to enhanced electrocatalytic activity.

Conductive bimetal organic framework nanorods decorated with highly dispersed Co3O4nanoparticles as bi-functional electrocatalyst

The poor electronic conductivity and low intrinsic electrocatalytic activity of metal organic frameworks (MOFs) greatly limit their direct application in electrocatalytic reactions. Herein, we report a conductive two-dimensionalπ-dconjugated Ni and Co bimetal organic framework (MOF)-NiCo-(2,3,6,7,10,11-hexaiminotriphenylene) (NiCo-HITP) nanorods decorated with highly dispersed Co₃O₄nanoparticles (NPs) as a promising bi-functional electrocatalyst towards oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) through an effective and facile strategy by modifying the rod-shaped -Ni₃HITP₂crystals using cobalt ions. The triggered electrocatalytic activity of the resulting MOF-based materials was achieved by increasing the electrical conductivity (7.23 S cm^-1) originated from Ni₃HITP₂substrate and also by creating the cooperative catalysis sites of Co-N_xand Co₃O₄NPs. Optimized syntheses show a promising ORR activity with a high half-wave potential (0.77 V) and also a significantly improved OER activity compared with pure Ni₃HITP₂in alkaline electrolyte. Furthermore, a rechargeable Zn-air battery using the as-prepared material as air-cathode also shows a high power density (143.1 mW cm^-2)-even comparable to a commercial Pt/C-RuO₂-based battery. This methodology offers a new prospect in the design and synthesis of non-carbonized MOF bi-functional electrocatalysts for efficient catalysis towards ORR and OER.

Tuning Dynamically Formed Active Phases and Catalytic Mechanisms of In Situ Electrochemically Activated Layered Double Hydroxide for Oxygen Evolution Reaction

The active phase and catalytic mechanisms of Ni-based layered double hydroxide (LDH) materials for oxygen evolution reaction (OER) have no common consensus and remain controversial. Moreover, engineering the site activity and the number of active sites of LDHs is an efficient approach to advance the OER activity, as the thickness and stacking structure of the LDHs layer limit the catalytic activity. This work presents an interesting in situ approach of tuning the site activity and number of active sites of NiMn-LDHs, which exhibit the superior OER performance (onset overpotential of 0.17 V and overpotential of 0.24 V at 10 mA cm^-2). The fundamental mechanistic insights and active phases during the OER process are characterized by in operando techniques along with the computational density functional theory calculations, revealing that the Ni site constitutes the OER activity and the dynamically generated NiOOH moiety is the active phase. We also prove that Ni sites undergo a reversible oxidation state under the working conditions to create active NiOOH species which catalyze the water to generate oxygen. These findings suggest that the Ni(III) phase in NiMn-LDHs is the OER active site and Mn promotes the electronic properties of Ni sites. Utilizing in situ/in operando techniques and theoretical calculation, we find that the in situ intercalation of guest anions allows the expansion of the LDH layers and keeps the active NiOOH species under the oxidation state of +3 via electron coupling, which ultimately tunes the site populations and site activity toward the superior OER activity, respectively. This work thus targets to provide insight into strategies to design the next generation of highly active catalysts for water electrolysis and fuel cell technologies.

Ni/NiO heterostructures encapsulated in oxygen-doped graphene as multifunctional electrocatalysts for the HER, UOR and HMF oxidation reaction

A controlled scalable arc-discharge method was developed to produce metal/metal oxide nanoparticles encapsulated in graphene as excellent catalysts for multiple reactions, including HER, UOR, and the HMF oxidation reaction.

Interface Engineering of CoS/CoO@N-Doped Graphene Nanocomposite for High-Performance Rechargeable Zn-Air Batteries

Low cost and green fabrication of high-performance electrocatalysts with earth-abundant resources for oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are crucial for the large-scale application of rechargeable Zn-air batteries (ZABs). In this work, our density functional theory calculations on the electrocatalyst suggest that the rational construction of interfacial structure can induce local charge redistribution, improve the electronic conductivity and enhance the catalyst stability. In order to realize such a structure, we spatially immobilize heterogeneous CoS/CoO nanocrystals onto N-doped graphene to synthesize a bifunctional electrocatalyst (CoS/CoO@NGNs). The optimization of the composition, interfacial structure and conductivity of the electrocatalyst is conducted to achieve bifunctional catalytic activity and deliver outstanding efficiency and stability for both ORR and OER. The aqueous ZAB with the as-prepared CoS/CoO@NGNs cathode displays a high maximum power density of 137.8 mW cm^-2, a specific capacity of 723.9 mAh g^-1 and excellent cycling stability (continuous operating for 100 h) with a high round-trip efficiency. In addition, the assembled quasi-solid-state ZAB also exhibits outstanding mechanical flexibility besides high battery performances, showing great potential for applications in flexible and wearable electronic devices.

Bifunctional Catalysts for Reversible Oxygen Evolution Reaction and Oxygen Reduction Reaction

Metal-air batteries (MABs) and reversible fuel cells (RFCs) rely on the bifunctional oxygen catalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). Finding efficient bifunctional oxygen catalysts is the ultimate goal and it has attracted a great deal of attention. The dilemma is that a good ORR catalyst is not necessarily efficient for OER, and vice versa. Thus, the development of a new type of bifunctional oxygen catalysts should ensure that the catalysts exhibit high activity for both OER and ORR. Composites with multicomponents for active centers supported on highly conductive matrices could be able to meet the challenges and offering new opportunities. In this Review, the evolution of bifunctional catalysts is summarized and discussed aiming to deliver high-performance bifunctional catalysts with low overpotentials.

Nanoscale nickel–iron nitride-derived efficient electrochemical oxygen evolution catalysts

Ni₃FeN/Ni heterostructures are preparedviachemical etching followed by a nitridation process, and thein situgenerated NiFeOOH/Ni₃FeN/Ni exhibits outstanding OER activity.