The mechanism studies of the adsorption–desorption process of rutin from water/ethanol solution and the extract of bitter orange peel by the carboxylated multiwalled carbon nanotubes

C-GCS@ZIF-F/PL based electrochemical sensor for rapid and ultra-sensitive detection of rutin in foods

Herein, a stable and ultra-sensitive rutin electrochemical sensor was successfully developed. This sensor based on glassy carbon electrode (GCE) modified with C-GCS@ZIF-F/PL nanocomposite, which was made of thermally carbonized glucose (GCS) doped with flower-like ZIF (ZIF-F) and pencil lead (PL). The electrochemical response of rutin was considerably significant at C-GCS@ZIF-F/PL/GCE, demonstrating favorable conductivity and electrocatalytic properties for detection of rutin. Under optimal conditions, the linear range is 0.1-100 μM, with a low detection limit (LOD) of 0.0054 μM. It also exhibits excellent stability, reproducibility, as well as selectivity over common interfering ions such as Na+, uric acid, quercetin and riboflavin, etc. Meanwhile, the practical utility of developed sensor was evaluated in food samples including honey, orange, and buckwheat tea, achieving satisfactory recovery rates ranging from 98.2% to 101.7%. This paper introduces a novel technique for the detection of rutin in foods.

The development of multifunctional materials for water pollution remediation using pollen and sporopollenin

Pollen is a promising material for water treatment owing to its renewable nature, abundant sources, and vast reserves. The natural polymer sporopollenin, found within pollen exine, possesses a distinctive layered porous structure, mechanical strength, and stable chemical properties, which can be utilized to prepare sporopollenin exine capsules (SECs). Leveraging these attributes, pollen or SECs can be used to develop water pollution remediation materials. In this review, the structure of pollen is first introduced, followed by the categorization of various methods for extracting SECs. Then, the functional expansion of pollen adsorbents, with an emphasis on their recyclability, reusability, and visual sensing capabilities, as opposed to mere functional group modification, is discussed. Furthermore, the progress made in utilizing pollen as a biological template for synthesizing catalysts is summarized. Intriguingly, pollen can also be engineered into self-propelled micromotors, enhancing its potential application in adsorption and catalysis. Finally, the challenges associated with the application of pollen in water pollution treatment are discussed. These challenges include the selection of environmentally friendly, non-toxic reagents in synthesizing pollen water remediation products and the large-scale application after synthesis. Moreover, the multifunctional synthesis and application of different water remediation products are prospected.

Co(II)-coordination Complex: Fluorescence Performances and Combined with Taxotere-Hydrogels on Breast Cancer Treatment and Clinical Care

In this study, a novel coordination polymer {Co2(Oaobtc)(bpe)(H2O)4]}n (1) was synthesized under hydrothermal conditions using a hybrid ligand synthesis method, where H4Oobtc represents 2,3,3'-tricarboxylate azobenzene, and bpe represents 1,2-bis(4-pyridyl)ethylene. The obtained CP1 was characterized by elemental analysis (EA), powder X-ray diffraction (PXRD), and thermal gravimetric analysis (TGA). Fluorescence testing confirmed the excellent photoluminescent performance of compound 1, indicating its potential as a cyan-emitting fluorescent material. Hyaluronic acid (HA) and carboxymethyl chitosan (CMCS) are natural polysaccharides known for their biocompatibility. HA/CMCS hydrogels were synthesized using a chemical synthesis method, featuring a three-dimensional network structure with interconnected pores, and an average pore size of 314.75 ± 11.25 μm. The characterization of the taxotere-loaded hydrogel was performed using infrared spectroscopy, confirming the effective encapsulation of the drug within the hydrogel. Utilizing taxotere as a model drug, a novel taxotere-loaded metal gel was synthesized, and its anticancer efficacy was evaluated. Furthermore, the influence of different pH levels on drug release rate was investigated. Finally, the encapsulation and release of taxotere in the hydrogel were studied using UV-visible spectroscopy.

A sustainable nano-hybrid system of laccase@M-MWCNTs for multifunctional PAHs and PhACs removal from water, wastewater, and lake water

This study examined the use of modified multiwall carbon nanotubes (M-MWCNTs) with immobilized laccase (L@M-MWCNTs) for removing ciprofloxacin (Cip), carbamazepine (Cbz), diclofenac (Dcf), benzo[a]pyrene (Bap), and anthracene (Ant) from different water samples. The synthesized materials were characterized using an array of advanced analytical techniques. The physical immobilization of laccase onto M-MWCNTs was confirmed through Scanning electron microscope (SEM)-dispersive X-ray spectroscopy (EDS) analysis and Brunner-Emmet-Teller (BET) surface area measurements. The specific surface area of M-MWCNTs decreased by 65% upon laccase immobilization. There was also an increase in nitrogen content seen by EDS analysis asserting successful immobilization. The results of Boehm titration and Fourier transform infrared (FTIR) exhibited an increase in acidic functional groups after laccase immobilization. L@M-MWCNTs storage for two months maintained 77.8%, 61.6%, and 57.6% of its initial activity for 4 °C, 25 °C, and 35 °C, respectively. In contrast, the free laccase exhibited 55.3%, 37.5%, and 23.5% of its initial activity at 4 °C, 25 °C, and 35 °C, respectively. MWCNTs improved storability and widened the working temperature range of laccase. The optimum removal conditions of studied pollutants were pH 5, 25 °C, and 1.6 g/L of M-MWCNTs. These parameters led to >90% removal of the targeted pollutants for four treatment cycles of both synthetic water and spiked lake water. L@M-MWCNTs demonstrated consistent removal of >90% for up to five cycles even with spiked wastewater. The adsorption was endothermic and followed Langmuir isotherm. Oxidation, dehydrogenation, hydroxylation, and ring cleavage seem to be the dominant degradation mechanisms.

Adsorption of rutin from olive mill wastewater using copolymeric hydrogels based on N-vinylimidazole: Kinetic, equilibrium, and thermodynamics assessments

Olive mill wastewater, also known as olive wastewater, contains biologically active components with various beneficial effects on health. The development of novel adsorbent materials for the recovery of these biologically active substances is important area of research. In this study, copolymeric hydrogels based on N-vinylimidazole (VIm), a new material that has never been used as an adsorbent in the separation of phenolic components, were synthesized. The hydrogels synthesized in this study is copolymer structures based on N-vinylimidazole (VIm) containing [2- (methacryloxy) ethyl] dimethylpentylammonium bromide (QDMAC5) in different moles. QDMAC5 was obtained by quaternization of 2- (dimethylamino) ethyl methacrylate (DMA) with 1-bromopentane (C5). The production of copolymer hydrogels was carried out by free radical solution polymerization. The syntheses were carried out only by changing the monomer composition so that the crosslinker ratio remained constant (1.2 mol%). The QDMAC5 content in the copolymers was 5, 10, 20, 30, and 50 mol%. So, the resulting structures were named PVQ-5%, PVQ-10%, PVQ-20%, PVQ-30%, and PVQ-50%, respectively. Functional group characterizations of hydrogels were made by Fourier Transform Infrared Spectrometry (FTIR). The surface of the hydrogels was analyzed by Scanning Electron Microscopy (SEM). Finally, thermogravimetric analyzes (TGA) were performed to investigate the thermal degradation behavior. The recovery of the rutin present in olive mill wastewater has been investigated as a model study. Kinetic data has been represented by the selected models (pseudo-first order, pseudo-second order, and intraparticle diffusion) convincingly (R² > 0.76), while the equilibrium findings have fitted well to Langmuir, Freundlich, and Temkin equations (R² > 0.77). Rutin adsorption process on N-vinylimidazole (VIm) based copolymeric hydrogels has been found as exothermic and spontaneous chemisorption process depending on the thermodynamic analysis.

Application of graphene oxide in the adsorption and extraction of bioactive compounds from lemon peel

The bioactive compounds like rutin, naringin, and gallic acid have been separated from lemon peel by graphene oxide (GO). The different influences such as pH values and separation conditions were investigated. Moreover, the samples were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, UV-Vis spectroscopy, and high-performance liquid chromatography. The findings of high-performance liquid chromatography revealed that the adsorbed proportion of rutin by GO was more than naringin and gallic acid so that 66.7% of rutin, 34% of naringin, and 19% of gallic acid from the extract were remarkably adsorbed and separated. Besides, adsorption percentage of these materials by GO was considered 74.8% after five cycles of adsorption-desorption process. On the other hand, we carried out batch experiments in order to study the adsorption mechanism of rutin on the GO since rutin was the highest quantity of bioactive substance in lemon peel. Pseudo-second-order kinetic model and Langmuir isotherm were the best models for describing adsorption process of rutin by GO. Adsorption capacity of rutin by GO was obtained about 21.08 mgg-1. In addition, the physical adsorption of rutin by GO was confirmed by Dubinin-Radushkevich isotherm. This research confirmed that this method for separation of flavonoids is simple and less cost.