Fabrication of a novel polyaniline/green‐synthesized, silver‐nanoparticle‐modified carbon paste electrode for electrochemical sensing of lead ions

Polypyrrole functionalized MoS2 for sensitive and simultaneous determination of heavy metal ions in water

Assessing heavy metal ion (HMI) contamination to sustain drinking water hygiene is a challenge. Conventional approaches are appealing for the detection of HMIs but electrochemical approaches can resolve the limitations of these approaches, such as tedious sample preparation, high cost, time consuming and the need for trained professionals. Here, an electrochemical approach is developed using a nano-sphered polypyrrole (PPy) functionalized with MoS2 (PPy/MoS2) by square wave anodic stripping voltammetry for the detection of HMIs. The developed sensor can detect Pb2+ with a limit of detection of 0.03 nM and a sensitivity of 36.42 μA nM-1. Additionally, the PPy/MoS2 sensor was employed for the simultaneous detection of HMIs of Cd2+, Pb2+, Cu2+ and Hg2+. The reproducibility, stability and anti-interference studies confirm that the sensor can be used to monitor HMI contamination of water.

2D MXene-Based Nanoscale Materials for Electrochemical Sensing Toward the Detection of Hazardous Pollutants: A Perspective

MXenes (Mn+1XnTx), a subgroup of 2-dimensional (2D) materials, specifically comprise transition metal carbides, nitrides, and carbonitrides. They exhibit exceptional electrocatalytic and photocatalytic properties, making them well-suited for the detection and removal of pollutants from aqueous environments. Because of their high surface area and remarkable properties, they are being utilized in various applications, including catalysis, sensing, and adsorption, to combat pollution and mitigate its adverse effects. Different characterization techniques like XRD, SEM, TEM, UV-Visible spectroscopy, and Raman spectroscopy have been used for the structural elucidation of 2D MXene. Current responses against applied potential were measured during the electrochemical sensing of the hazardous pollutants in an aqueous system using a variety of electroanalytical techniques, including differential pulse voltammetry, amperometry, square wave anodic stripping voltammetry, etc. In this review, a comprehensive discussion on structural patterns, synthesis, properties of MXene and their application for electrochemical detection of lethal pollutants like hydroquionone, phenol, catechol, mercury and lead, etc. are presented. This review will be helpful to critically understand the methods of synthesis and application of MXenes for the removal of environmental pollutants.

Green synthesis of copper oxide nanoparticles using Ficus elastica extract for the electrochemical simultaneous detection of Cd2+, Pb2+, and Hg2

In this paper, for the first time, we report the use of a new carbon paste electrode based on a low-cost pencil graphite powder modified with polyaniline (PANI) and green synthesized copper oxide nanoparticles using Ficus elastica extract as a sensor for Cd²⁺, Pb²⁺, and Hg²⁺. The elaborated electrode was characterized by FT-IR spectroscopy, field-emission gun scanning electron microscopy (FEG-SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), and simultaneous thermal analysis (TGA/DSC). The electrochemical behavior of the sensor was evaluated using cyclic voltammetry (CV) and electrochemical impedance spectroscopy techniques. According to CV, as well as square wave voltammetry (SWV) results, it was found that the CuONPs/PANI-CPE sensor was able to determine very low concentrations of Cd²⁺, Pb²⁺, and Hg²⁺ in HCl (0.01 M) either in single metal or in multi-metal solutions with a high sensitivity. Furthermore, Cd²⁺, Pb²⁺, and Hg²⁺ simultaneous detection on CuONPs/PANI-CPE achieved very low limits of detection (0.11, 0.16, and 0.07 μg L^-1, respectively). Besides, the designed sensor displayed a good selectivity, reproducibility, and stability. Moreover, CuONPs/PANI-CPE enabled us to determine with high accuracy Cd²⁺, Pb²⁺, and Hg²⁺ traces in environmental matrices.

The Role of Silver Nanoparticles in Electrochemical Sensors for Aquatic Environmental Analysis

With rapidly increasing environmental pollution, there is an urgent need for the development of fast, low-cost, and effective sensing devices for the detection of various organic and inorganic substances. Silver nanoparticles (AgNPs) are well known for their superior optoelectronic and physicochemical properties, and have, therefore, attracted a great deal of interest in the sensor arena. The introduction of AgNPs onto the surface of two-dimensional (2D) structures, incorporation into conductive polymers, or within three-dimensional (3D) nanohybrid architectures is a common strategy to fabricate novel platforms with improved chemical and physical properties for analyte sensing. In the first section of this review, the main wet chemical reduction approaches for the successful synthesis of functional AgNPs for electrochemical sensing applications are discussed. Then, a brief section on the sensing principles of voltammetric and amperometric sensors is given. The current utilization of silver nanoparticles and silver-based composite nanomaterials for the fabrication of voltammetric and amperometric sensors as novel platforms for the detection of environmental pollutants in water matrices is summarized. Finally, the current challenges and future directions for the nanosilver-based electrochemical sensing of environmental pollutants are outlined.

Development of a Novel Electrochemical Sensor Based on Gold Nanoparticle-Modified Carbon-Paste Electrode for the Detection of Congo Red Dye

In this study, gold nanoparticles (AuNPs) were electrodeposited on samples of a carbon-paste electrode (CPE) with different thicknesses. The prepared AuNPs were characterized using different analysis techniques, such as FTIR, UV-Vis, SEM, EDX, TEM images, and XRD analysis. The fabricated modified electrode AuNPs/CPE was used for the sensitive detection of Congo red (CR) dye. Electrochemical sensing was conducted using square-wave voltammetry (SWV) in a 0.1 M acetate buffer solution at pH 6.5. The proposed sensor exhibited high efficiency for the electrochemical determination of CR dye with high selectivity and sensitivity and a low detection limit of 0.07 μM in the concentration range of 1-30 μM and 0.7 μM in the concentration range of 50-200 μM. The practical application of the AuNPs/CPE was verified by detecting CR dye in various real samples involving jelly, candy, wastewater, and tap water. The calculated recoveries (88-106%) were within the acceptable range.

Upgrading Waste Activated Carbon by Equipping Micro-/Mesopore-Dominant Microstructures from the Perspective of Circular Economy

Equipping wastes with interesting properties in response to the circular economy could release environmental burdens by reducing resource exploitation and material manufacturing. In this study, we demonstrated that the waste regenerated activated carbon (RAC) could become micro-/mesopore-dominant through a simple surfactant/gel modification. This was achieved by associating carbon precursors, such as commercially available low-cost surfactants/methyl cellulose thickening reagents, with the pores of RAC. Following heat treatment, associated carbon precursors were carbonized, hence modifying the microstructure of RAC to be micro-/mesopore-dominant. The surfactant modification gave rise to a micropore-dominant RAC by increasing the micropore volume (PVmicro) together with significantly decreasing the mesopore volume (PVmeso) and macropore volume (PVmacro). In contrast, gel modification led to mesopore-rich RAC by blocking micropores with carbonized methyl cellulose and a surfactant matrix. Interestingly, both surfactant/gel modifications were insensitive to the properties of the surfactant applied, which provided a new alternative for waste/low-grade surfactant mixture disposal. Our results provide an important demonstration that waste could be effectively upgraded with a rational design by exhibiting new properties in response to the circular economy.