The thermal immobilization of hydroxy-terminated silicone phases in high-temperature-silylated glass capillaries. A study of reaction mechanisms

High temperature stationary phase of polysiloxane containing N,N′-bis(diphenylsilyl) tetramethylcyclodisilazane for gas chromatography

A polysiloxane copolymer (P(BPTMC)-alt-ODMS) containing N,N′-bis(diphenyl-silyl) tetramethylcyclodisilazane (BPTMC) was used as stationary phase in gas chromatography with high thermal stability.

Preparation and characterization of fused-silica capillary columns coated with m-carborane–siloxane copolymers for gas chromatography

The carborane-siloxane copolymers Dexsil 300, a 34.5% bis(dimethylsilyl)-m-carborane-65.5% dimethylsiloxane copolymer, and Dexsil 400, a 24.9% bis(dimethylsilyl)-m-carborane-50.8% dimethyl, 24.3% methylphenylsiloxane copolymer, were coated on fused silica capillary columns and their gas chromatographic properties were evaluated. Their selectivity was evaluated using both Rohrschneider-McReynolds constants and triacylglycerol indices. The bis(dimethylsilyl)-m-carborane unit turned out to be equivalent to two dimethylsiloxy units and one half of a diphenylsiloxy unit. The m-carborane unit was found to cause a 15-25 K shift in the elution temperature between 120 and 360 degrees C. The working range was from 20 and 0 degrees C to 380 degrees C for Dexsil 300 and Dexsil 400, respectively. The column bleeding levels at 380 degrees C were below 20 and 15 pA for Dexsil 300 and Dexsil 400, respectively.

Approaches for the coating of capillary columns with highly phenylated stationary phases for high-temperature GC

Two highly phenylated tetramethyl-p-silphenylene-diphenylsiloxane copolymers were coated on fused silica capillary columns and used as stationary phases in GC. The copolymers offered new insights into the coating process and column preparation due to their physicochemical properties. The fused silica capillary surface had to be pretreated in various ways to achieve a homogeneous film and a well deactivated surface: etching with ammonium bifluoride; leaching with sodium hydroxide and hydrochloric acid; silylation with tetraphenyldimethyldisilazane and triphenylsilylamine. Droplet formation was observed on tetraphenyldimethyldisilazane silylated surfaces leading to capillary columns with low separation efficiency. The topology of inhomogeneous films was investigated by light microscopy, scanning electron microscopy, and Auger electron spectroscopy. It became apparent that the stationary phase did not form droplets but islands, which are connected by a wetting layer according to the Stranski-Krastanov growth mode. Both copolymers are potential stationary phases for high-temperature GC with promising properties. They offer a higher overall polarity than 75% phenyl, 25% methyl-polysiloxanes in combination with increased thermal stability and reduced bleed levels.