Nonaqueous solvents in the on-line capillary electrophoresis-mass spectrometry analysis of drug metabolites

Nonaqueous capillary electrophoresis-mass spectrometry

Nonaqueous background electrolytes broaden the application of capillary electrophoresis displaying altered separation selectivity and interactions between analytes and buffer additives compared to aqueous background electrolytes. In addition, nonaqueous capillary electrophoresis (NACE) appears to be ideally suited for online coupling with mass spectrometry due to the high volatility and low surface tension of many organic solvents. Despite these advantages and an increasing use of nonaqueous background electrolytes in CE, coupling of NACE to mass spectrometry has not yet been applied very often to date. The present review summarizes the applications of online NACE-MS with regard to the analysis of drugs, stereoisomers, peptides, alkaloids, polymers and others. A brief discussion of solvent effects in NACE and pH of nonaqueous background electrolyte systems is also presented.

Nonaqueous capillary electrophoresis in pharmaceutical analysis

This review presents different solvents and electrolytes commonly used as BGEs in NACE for the analysis of pharmaceutical compounds. Most NACE applications carried out since 1998 for the analysis of compounds of pharmaceutical interest are presented in four tables: (i) analysis of drugs and related substances, (ii) analysis of chiral substances, (iii) analysis of phytochemical extracts and (iv) analysis of drugs in biological fluids. These selected examples are used to illustrate the interest in NACE versus conventional aqueous CE.

Development of a chiral non-aqueous capillary electrophoretic system using the partial filling technique with UV and mass spectrometric detection

A chiral non-aqueous CE system with UV and mass spectrometric detection has been developed. The enantioseparation was promoted by diastereomeric complex (ion-pair) formation between the amines (e.g. salbutamol, atenolol) and the chiral selector, (-)-2,3:4,6-di-O-isopropylidene-2-keto-L-gulonic acid [(-)-DIKGA]. Different solvent mixtures were studied, as well as different concentrations of (-)-DIKGA and ammonium acetate in the background electrolyte. A partial filling technique was developed with a selector plug composed of (-)-DIKGA and ammonium acetate in a solvent mixture of methanol and 2-propanol. The separated enantiomers of pronethalol were detected by a Q-TOF MS system equipped with a sheath-flow electrospray ionization interface.

Nonaqueous capillary electrophoresis-mass spectrometry for separation of venlafaxine and its phase I metabolites

Aqueous and nonaqueous capillary electrophoresis (NACE) were investigated for separation of venlafaxine, a new second-generation antidepressant, and its three phase I metabolites. Working at basic pH, around the venlafaxine pKa value, was effective in resolving the investigated drugs, but created considerable peak tailing. To overcome electrostatic interactions between analytes and silanol groups, investigations were also carried out at acidic pH. However, despite the addition of up to 50% v/v of organic solvents (e.g., methanol or acetonitrile), complete separation of the studied compounds was not possible. NACE was found to be an appropriate alternative to resolve venlafaxine and its metabolites simultaneously. Using a conventional capillary (fused-silica, 64.5 cm length, 50 microm inner diameter), and a methanol-acetonitrile mixture (20/80 v/v) containing 25 mM ammonium formate and 1 M formic acid, complete resolution of these closely related compounds was performed in less than 3.5 min. Selectivity, efficiency and separation time were greatly affected by the organic solvent composition. As the electric current generated in nonaqueous medium was very low, the electric field was further increased by reducing the capillary length. This allowed a baseline resolution of venlafaxine and its three metabolities in 0.7 min. Selectivity was compared in aqueous and nonaqueous media in relation to the acid-base properties of the analytes as well as to the solvation degree. Finally, the method successfully coupled on-line to mass spectrometry with electrospray ionization interface allowed significant sensitivity enhancement.

Nonaqueous capillary electrophoresis: a versatile completion of electrophoretic separation techniques

Nonaqueous capillary electrophoresis (NACE) is the application of a conductive electrolyte dissolved in either one organic solvent or a mixture of several organic solvents to carry out zone electrophoresis or related techniques in fused-silica capillaries. A complete review on the fundamentals, the optimization of analytical methods, practical considerations, and applications is given. To explain the differences to CE in aqueous media, a brief summary on solvent properties and molecular interactions in solutions introduces the reader into these fields. The use of additives to tune separation selectivity by means beyond a pure zone-electrophoretic mechanism is discussed in detail for organic media. Special detection techniques providing high potential for NACE are presented. Data on the precision of NACE methods and a list of relevant applications are included. More specialized applications like the determination of physicochemical constants in NACE or the setup of a semipreparative mode are described.

Simultaneous analysis of some amphetamine derivatives in urine by nonaqueous capillary electrophoresis coupled to electrospray ionization mass spectrometry

A nonaqueous capillary electrophoresis method, coupled to UV and electrospray mass spectrometry (ESI-MS), is described for the simultaneous analysis of Ecstasy and other related derivatives. Several electrophoretic and ESI-MS parameters were systematically investigated, such as electrolyte nature and concentration, organic solvent and sheath liquid compositions, nebulization gas pressure and drying gas flow-rate. The best results were achieved with an acetonitrile-methanol (80:20, v/v) mixture containing 25 mM ammonium formate and 1 M formic acid, an applied voltage of 30 kV and a separation temperature of 15 degrees C. Under optimized CE-ESI-MS conditions, separation of the investigated drugs was performed in less than 6 min, with a high efficiency. Method precision based on migration time and peak area was determined and the limits of detection, which depend on the tested compound, were established between 20 and 70 ng ml(-1) in the selected ion monitoring mode. Finally, the described method was successfully applied to the analysis of amphetamines in urine after a liquid-liquid extraction.

Non-aqueous capillary electrophoresis

The benefits of non-aqueous capillary electrophoresis have been described in a number of recent publications. The wide selection of organic solvents, with their very different physicochemical properties, broadens our scope to manipulate separation selectivity. The lower currents present in non-aqueous solvents allow the use of high electric field strengths and wide bore capillaries, the latter in turn allowing larger sample load. In many cases detection sensitivity can also be enhanced. The potential of non-aqueous capillary electrophoresis is discussed throughout the paper, and the feasibility of capillary electrophoresis under non-aqueous media is demonstrated with reference to several applications.

Chiral separations in capillary high-performance liquid chromatography and nonaqueous capillary electrochromatography using helically chiral poly(diphenyl-2-pyridylmethyl methacrylate) as chiral stationary phase

Enantioseparations in nonaqueous capillary electrochromatography (CEC) are reported in this study for the first time, using wide-pore aminopropyl silica gel coated with helically chiral poly(diphenyl-2-pyridylmethyl methacrylate) (PDPM) as chiral stationary phase (CSP). The anodic electroosmotic flow (EOF) in a methanolic solution of ammonium acetate was used for the migration of neutral analytes through the packed bed in the capillaries. Four different techniques, high-performance liquid chromatography (HPLC) in common-size columns, capillary HPLC, pressure-assisted CEC and CEC were compared from the viewpoint of separation parameters. The latter three were performed with the same experimental setup, varying the relative contribution of the pressure-driven and the electrically driven flow to the overall mobility of the analyte. Capillary HPLC offers clear advantages compared to enantioseparations in common-size columns. However, for a given particle size of the packing material, CEC was not obviously advantageous compared to pressure-driven separations.

Separation of nonsteroidal anti-inflammatory drugs by capillary electrophoresis using nonaqueous electrolytes

The aim of the present work was to investigate the separation of nonsteroidal anti-inflammatory drugs (NSAIDs: niflumic acid, flufenamic acid, piroxicam, alclofenac, tiaprofenic acid, flurbiprofen, suprofen, ketoprofen, naproxen, indomethacin, carprofen, indoprofen, sulindac) in capillary electrophoresis (CE) using completely nonaqueous systems. The influence of different parameters such as nature and proportion of organic solvent (methanol, acetonitrile, 2-propanol), apparent pH (ranging from 7 to 9) and temperature (ranging from 25 to 40 degrees C) on selectivity and migration times were studied systematically in an uncoated fused-silica capillary. A nonaqueous electrolyte made of 50 mM ammonium acetate - 13.75 mM ammonia in methanol proved to resolve 11 NSAIDs at 25 degrees C and 13 NSAIDs at 36 degrees C, both within 13 min and without a modifier besides the methanol itself. The same buffer containing 30% acetonitrile provides a satisfactory separation for 13 NSAIDs within 14 min at 25 degrees C.

Nonaqueous media for separation of nonionic organic compounds by capillary electrophoresis

For the separation of neutral compounds by micellar electrokinetic chromatography, separations are usually carried out in predominantly aqueous solution in order to preserve the charged micelle necessary for the separation. We now show that polycyclic aromatic hydrocarbon (PAH) compounds can be separated efficiently by capillary electrophoresis in pure methanol or in aqueous-organic mixtures containing a high percentage of methanol. Sodium tetradecyl sulfate was the preferred surfactant. The effects of pH, solvent composition, surfactant structure, and surfactant concentration on the separations were studied. Reproducible migration times and linear calibration plots were obtained.

On-line nonaqueous capillary electrophoresis and electrospray mass spectrometry of tricyclic antidepressants and metabolic profiling of amitriptyline by Cunninghamella elegans

An on-line nonaqueous capillary electrophoresis-electrospray mass spectrometry (ESI-MS) technique was developed using a commercial ion spray interface. The nonaqueous capillary electrophoresis ESI-MS system was used to profile tricyclic antidepressants of similar structures and mass-to-charge ratios. We found that pure methanol can be used as a sheath liquid to obtain stable ion spray from nonaqueous capillary electrophoresis. The flow rate of the coaxial nebulizing gas affected baseline signals, separation efficiency, and migration times. Other nonaqueous capillary electrophoresis operating conditions and electrospray parameters were optimized for enhanced baseline separation and high sensitivity detection. The effect of sample stacking on separation and detection was evaluated. The calculated detection limits were approximately 3 pg injected onto the capillary. ESI mass spectra of tricyclic antidepressants from a single quadrupole MS were obtained and elucidated. The information was used to propose fragmentation pathways of the tricyclic antidepressants. The method was also used to analyze the metabolites of amitriptyline produced by the fungus Cunninghamella elegans. Sixteen metabolites were detected and most of them were tentatively identified as demethylated and/or hydroxylated, and/or N-oxidized products.

Analyte identification in capillary electrophoretic separation techniques

A review on applications of on-line hyphenation in capillary electrophoresis and capillary electrochromatography for the identification of migrating analytes is presented. There is an urgent need for unambiguous analyte identification by combining spectral information and observed migration times, because the parameters influencing the migration times and separation efficiencies in these separation techniques are not easily controlled, especially when real samples containing unknown interferences have to be analyzed. The spectrometric techniques covered here are ultraviolet and visible radiation (UV/Vis) absorption, fluorescence including fluorescence line-narrowing spectroscopy, Raman spectroscopy, nuclear magnetic resonance and mass spectrometry. Attention is essentially confined to literature reports in which the extra information provided by the detector is really used for identification purposes, especially in real-life samples, while the interfacing as such and analyte detectabilities in standard solutions are only briefly discussed. This article covers an extensive fraction of the literature published on this topic until the beginning of 1998.

Nonaqueous capillary zone electrophoresis for separation of free fatty acids with indirect fluorescence detection

The feasibility of combining nonaqueous capillary zone electrophoresis with indirect fluorescence detection was studied for the efficient separation and sensitive detection of ionizable hydrophobic substances which do not possess practically suitable detection properties. Medium- and long-chain free fatty acids, C6-C24, were selected as test compounds. The results showed that such a wide range of medium- and long-chain free fatty acids could be separated between any two consecutive homologs in one run and be detected at a level of about 0.01-0.02 mM in highly basic methanol/acetonitrile media containing fluorescein as coion of background electrolyte for indirect fluorescence detection.

Nonaqueous capillary electrophoresis--its applicability in the analysis of food, pharmaceuticals and biological fluids

The use of nonaqueous electrophoresis media for the application of capillary electrophoresis in the analysis of food, pharmaceuticals and biological fluids is reviewed. Some of the applications are discussed in detail and the benefits of using nonaqueous media in these cases are outlined. Three new applications within pharmaceutical analyses are presented. In these methods either a simple sample pretreatment by dilution with methanol (determination of chlorhexidine in a cream) or selective on-line capillary electrophoresis mass spectrometry (methods for identification of seizure drugs or opium alkaloids) are used. The choice of organic solvents and electrolytes for nonaqueous capillary electrophoresis are discussed. Furthermore, validation data obtained using capillary electrophoresis based on the nonaqueous principle are listed and discussed.

On-line capillary electrophoresis-electrospray ionization mass spectrometry using a polymerized anionic surfactant

On-line capillary electrophoresis-electrospray ionization-mass spectrometry (CE-ESI-MS) has been used to determine the tricyclic antidepressant drugs (imipramine, doxepin, and amitriptyline) as well as the beta-adrenergic blocker drugs (propranolol and alprenolol). A CE-ESI-MS interface linking a manually operated CE system and a Finnigan MAT-900 sector mass spectrometer (with an Analytica electrospray ionization source) has been constructed in-house and employed for this study. Although a water/methanol based capillary zone electrophoresis (CZE) buffer was initially used to determine these analytes, enhanced resolution was obtained by addition of a polymerized surfactant, i.e., poly-sodium undecylenic sulfate (poly-SUS), into the electrokinetic chromatography (EKC) buffer. When a low concentration of this poly-SUS surfactant was added to a volatile EKC buffer, these structurally similar cationic drugs were EKC separated and on-line detected by ESI-MS.

Determination of chiral pharmaceutical compounds, terbutaline, ketamine and propranolol, by on-line capillary electrophoresis-electrospray ionization mass spectrometry

On-line capillary electrophoresis-electrospray ionization mass spectrometry (CE-ESI-MS) has been employed for the determination of racemic mixtures of the chiral drugs, terbutaline, ketamine, and propranolol. Separation of the different chiral forms has been achieved by introducing cyclodextrins (CDs), which act as chiral selectors, into the CE operating electrolytes. Cyclodextrins function as chiral selectors in CE because of their ability to form host-guest complexes (inclusion complexes) of varying stability with an array of chiral drugs and other compounds. Derivatized forms of beta-CD (i.e., dimethyl-beta-cyclodextrin and hydroxypropyl-beta-cyclodextrin) were used in this study due to their higher solubilities in the aqueous methanolic operating electrolyte than native beta-CD. Addition of minor quantities of methanol to the aqueous-based CE operating electrolytes improved the stability of electrospray ionization conditions and further enhanced CE resolution of the enantiomeric pairs relative to purely aqueous systems. Introduction of the CDs into the CE operating electrolytes caused suppression of analyte signals in ESI-MS, and the dependence of analyte signal intensities on the solution concentrations of the derivatized beta-CDs was examined. Under optimized conditions, the different enantiomeric forms of the compounds under investigation were successfully separated and detected by CE-ESI-MS.

Use of metal complexation in non-aqueous capillary electrophoresis systems for the separation and improved detection of tetracyclines

Metal complexation in non-aqueous capillary electrophoresis systems was evaluated for the separation and improved detection of tetracycline antibiotics using laser-induced fluorescence detection. It was found that three factors were important for the choice of complexing agent: (i) it should be soluble in the organic solvent used for the separation, (ii) it should have a sufficient fast complexing rate so as not to invalidate the electrophoretic separation and, (iii) it should give a large increase in the fluorescence intensity. Mg2+ ions were found to be the most suitable ions for the separation of the tetracyclines as the acetate salt of magnesium is very soluble in organic solvents and only a relatively low current was generated during electrophoresis making it possible to use high concentrations of the complexing metal ion. Metal complexation strongly intensified the fluorescence of tetracyclines and all organic solvents investigated further intensified the fluorescence, e.g. dimethylformamide improved the fluorescence of the oxytetracycline metal complex by a factor of 34 compared to water. However, magnesium acetate was not sufficiently soluble in dimethylformamide and therefore N-methylformamide, improving the fluorescence intensity by only a factor of 9, was used. It was demonstrated that the method can be used for the detection of tetracyclines at the ppb level in milk and plasma.

Behavior and use of nonaqueous media without supporting electrolyte in capillary electrophoresis and capillary electrochromatography

Five nonaqueous solvents (acetonitrile, methanol, N,N-dimethylformamide, dimethyl sulfoxide, formamide) and deionized water were investigated for their ability to support electroosmotic flow (EOF) without electrolytic additives. In general, flow was found to be equal to or greater than flow with typical CE buffer systems. The magnitude of EOF was determined for each solvent by open tubular capillary electrophoresis (CE) and related to viscosity (eta), dielectric constant (epsilon), and the ratio of dielectric constant to viscosity (eta/epsilon). Zeta potentials (zeta) were derived indirectly from flow data and tabulated. Comparisons of flow behavior and zeta were made between pure solvents and conventional CE buffers, and questions of equilibrium and reproducibility were addressed. Similar experiments were performed using hydroorganic mobile phases (ACN/water, MeOH/water) across the complete compositional range (100% water-100% organic), with flow characteristics and zeta reported for each mobile phase system. Packed capillary columns (5-microns ODS) were evaluated for flow and retention stability under capillary electrochromatographic (CEC) conditions. A separation of 11 polycyclic aromatic hydrocarbons was performed in under 13 min by CEC with an ACN/water mobile phase. Reduced plate heights (h) were calculated between 2.5 and 3.0 for solutes with capacity factors (k') up to 4.5 for the most retained solute.

Determination of association constants of dansyl-amino acids and beta-cyclodextrin in N-methylformamide by capillary electrophoresis

The use of nonaqueous background electrolytes in capillary electrophoresis (CE) is a promising new trend which should widen the scope of this technique. We demonstrate the chiral separation of dansyl-amino acids (Dns-AAs) in N-methylformamide (NMF) using beta-cyclodextrin (beta-CD) as chiral selector. The solubility of beta-CD is much better in NMF than in water, allowing high concentration of the chiral selector and successful enantioseparation despite the weak host-guest interaction between the Dns-AAs and beta-CD. The association constants for the complexation between Dns-AAs and beta-CD could be calculated from the electrophoretic mobilities, with attention paid to the change in viscosity of the electrolyte upon addition of beta-CD. The association constants ranged between 2 and 13 M(-1).

Application of capillary electrophoresis and related techniques to drug metabolism studies

The use of capillary electrophoresis (CE) for the separation of small organic molecules such as pharmaceutical agents and drug/xenobiotic metabolites has become increasingly popular. This has arisen, at least in part, from the complimentary mode of separation afforded by CE when compared to the more mature technique of HPLC. Other qualities of CE include relative ease of method of development, rapid analysis, and low solvent consumption. The recent introduction of a variety of detector systems (including UV diode array, laser-induced fluorescence, conductivity) and the demonstrated coupling of CE to MS have also aided acceptance of this technology. In the present report, we review the role of CE coupled to various detector systems including a mass spectrometer for the characterization of both in vitro and in vivo derived drug metabolite mixtures. Attributes of CE for this application are demonstrated by discussion of metabolism studies of the neuroleptic agent haloperidol. Various aspects of the development and use of CE and CE-MS for the characterization of haloperidol metabolites, including criteria for selection of parameters such as pH, ionic strength, extent of organic modification, and the use of nonaqueous capillary zone electrophoresis are discussed. We also consider potential limitations of CE and CE-MS for drug metabolism research and describe the introduction of membrane preconcentration-CE (mPC-CE) and mPC-CE-MS as a solution that overcomes the rather poor concentration limits of detection of CE methods without compromising the resolution of analytes or separation efficiency of this technique.

Capillary electrophoresis and capillary electrophoresis-mass spectrometry in drug and metabolite analysis

The structural diversity of modern therapeutic agents can lead to labour intensive method development for each drug and the structural characterization of their metabolites. In this work, we show the benefits of the high resolution capabilities of capillary electrophoresis (CE) and demonstrate that nonaqueous CE and on-line CE-mass spectrometry (CE-MS) leads to enhanced resolution and recovery of mixtures containing the prototype H2-antagonist, mifentidine, and putative metabolites. Furthermore, the usefulness of CE-tandem MS (CE-MS/MS) is also demonstrated by the structural characterization of the novel N2-hydroxylamine metabolite of mifentidine.