Antioxidant capability and potableness of fresh cloudy wheat beer stored at different temperatures

Effect of Coriander Seed Addition at Different Stages of Brewing on Selected Parameters of Low-Alcohol Wheat Beers

In recent years, there has been a significant decline in interest in high-alcohol beers, while interest in low- and non-alcohol beers is growing. The aim of this study was to investigate the influence of the addition of coriander seeds at various stages of the production of low-alcohol wheat beer (mashing, boiling, and fermentation). The presented article uses biological methods to produce low-alcohol beer. For this purpose, first, the mashing process was modified (breaking 44 °C for 20 min, followed by 75 °C for 60 min). The chemical composition and aroma components of the obtained beers were determined using various chromatographic methods (HPLC, GC-MS, and GC-O). Differences were found between the aroma components depending on the stage of production at which the coriander seeds were added. Beers with the addition of coriander seeds at the fermentation stage had the highest terpene content (linalool, camphor, trans-linalool oxide, and γ-terpinene) and boiling (myrcene, limonene, citronellol, and geraniol). The least desirable process is the addition of coriander seeds at the mashing stage due to the lowest content of volatile compounds. Additionally, beers with the addition of coriander seeds for fermentation were characterized by a higher content of antioxidant compounds. This proves that the addition of coriander seeds during beer production could improve the fermentation process and modify the quality of the obtaining beer.

Impact of the Addition of Fruits of Kamchatka Berries (L. caerulea var. kamtschatica) and Haskap (L. caerulea var. emphyllocalyx) on the Physicochemical Properties, Polyphenolic Content, Antioxidant Activity and Sensory Evaluation Craft Wheat Beers

Kamchatka berry (Lonicera caerulea var. kamtschatica) and haskap (Lonicera caerulea var. emphyllocalyx) fruit are important sources of bioactive compounds, mainly polyphenols, but also macro- and microelements. Physico-chemical analysis showed that wheat beers with added fruit were characterised by an average 14.06% higher ethanol content, lower bitterness and intense colour compared to the control, which was a wheat beer without added fruit. Wheat beers enriched with kamchatka berry fruit, including the "Aurora" variety, had the highest polyphenolic profile (e.g., chlorogenic acid content averaged 7.30 mg/L), and the antioxidant activity of fruit-enriched wheat beers determined by the DPPH method showed higher antioxidant activity of wheat beers enriched with kamchatka berry fruit, while those determined by the FRAP and ABTS methods showed higher antioxidant activity of wheat beers enriched with haskap fruit, including the "Willa" variety. Sensory evaluation of the beer product showed that wheat beers enriched with kamchatka berry fruits of the "Duet" variety and haskap fruits of the "Willa" variety were characterised by the most balanced taste and aroma. On the basis of the conducted research, it follows that both kamchatka berry fruits of the "Duet" and "Aurora" varieties and haskap fruit of the "Willa" variety can be used successfully in the production of fruity wheat beers.

Effect of the Addition of Lemongrass (Cymbopogon citratus) on the Quality and Microbiological Stability of Craft Wheat Beers

Lemongrass (Cymbopogon citratus) is a valuable source of vitamins, macro- and microelements, and essential oils. The purpose of this study was to compare the physicochemical properties, sensory properties, antioxidant activity, and microbiological stability of wheat beers enriched with varying additions of crushed lemongrass. Sensory evaluation showed that wheat beers enriched with 2.5% m/v lemongrass were characterised by balanced taste and aroma (overall impression). Physicochemical analysis of the wheat beers showed that increasing the concentration of lemongrass in the finished product negatively affected the ethanol content. Alcohol content in wheat beer enriched with 1% m/v lemongrass was on average 14.74% higher than wheat beer enriched with 2.5% m/v lemongrass and on average 17.93% higher than wheat beer enriched with 5% m/v addition of lemongrass. The concentration of lemongrass in the finished product also increased the acidity of the beers and affected the colour of the wheat beers compared to the control beer. The total polyphenol content and antioxidant activity of lemongrass-enriched wheat beers varied. Of the lemongrass-enriched beers analysed, the beer product with 5% m/v lemongrass was the most microbiologically stable. According to the study, crushed lemongrass-enriched wheat beer may represent a new trend in the brewing industry, but the brewing process still needs to be improved.

The Effect of the Addition of Ozonated and Non-Ozonated Fruits of the Saskatoon Berry (Amelanchier alnifolia Nutt.) on the Quality and Pro-Healthy Profile of Craft Wheat Beers

Research into the suitability of domestic raw materials, including, for example, new wheat cultivars and fruit additives for the production of flavoured beers, is increasingly being undertaken by minibreweries and craft breweries. The fruits of the Saskatoon berry are an important source of bioactive compounds, mainly polyphenols, but also macro- and microelements. The fruits of two Canadian cultivars of this species, 'Honeywood' and 'Thiessen', were used in this study. Physicochemical analysis showed that wheat beers with the addition of non-ozonated fruit were characterised by a higher ethanol content by 7.73% on average. On the other hand, enrichment of the beer product with fruit pulp obtained from the cv. 'Thiessen' had a positive effect on the degree of real attenuation and the polyphenol profile. Sensory evaluation of the beer product showed that wheat beers with the addition of 'Honeywood' fruit were characterised by the most balanced taste and aroma. On the basis of the conducted research, it can be concluded that fruits of both cvs. 'Honeywood' and 'Thiessen' can be used in the production of wheat beers, but the fermentation process has to be modified in order to obtain a higher yield of the fruit beer product.

Feasibility of Defatted Juice from Sea-Buckthorn Berries (Hippophae rhamnoides L.) as a Wheat Beer Enhancer

Juice made from sea-buckthorn berries (Hippophae rhamnoides L.) is a valuable source of bioactive compounds, vitamins, as well as micro- and macronutrients. By applying defatted sea-buckthorn juice, it is possible to enhance wheat beer and change its sensory properties and the contents of bioactive compounds in the finished product. A sensory assessment showed that wheat beers with a 5% v/v addition of sea-buckthorn juice were characterised by a balanced taste and aroma (overall impression). Physicochemical analyses showed that, compared to the control samples, wheat beers enhanced with defatted sea-buckthorn juice at a rate of 5% v/v or 10% v/v had high total acidity with respective mean values of 5.30 and 6.88 (0.1 M NaOH/100 mL), energy values lower on average by 4.04% and 8.35%, respective polyphenol contents of 274.1 mg GAE/L and 249.7 mg GAE/L, as well as higher antioxidant activity (measured using DPPH, FRAP, and ABTS assays). The findings show that the samples of wheat beer enhanced with sea-buckthorn juice had average ascorbic acid contents of 2.5 and 4.5 mg/100 mL (in samples with 5% v/v and 10% v/v additions, respectively) and contained flavone glycosides, e.g., kaempferol-3-O-glucuronide-7-O-hexoside. Based on the current findings, it can be concluded that wheat beer enhanced with sea-buckthorn juice could emerge as a new trend in the brewing industry.

Suitability of Selected Winter Cultivars of Wheat from Production of Wheat Beer

The study investigated the feasibility of three winter cultivars of wheat – Elixer, Rockefeller and Gimantis, for production of wheat beer. Reference samples were produced from commercially available wheat malt. The findings showed the beer produced from commercially available wheat malt presented the best sensory and physicochemical parameters, including real final fermentation of 70.11%. The results related to the investigated wheat cultivars showed good quality properties in the beer produced from malts obtained from Gimantis cultivar (content of CO2 – 0.58%), and from Rockefeller cultivar (alcohol content - 4.62% v/v). A similar relationship was observed in the sensory assessment. The findings related to beer produced from malt of Elixer wheat cultivar showed relatively low effectiveness of the production process (69.7%) and final beer fermentation (65.52%), and at the same time high contents of polyphenols (210 mg/dm3) and antioxidant activity. Wheat malts produced from Gimantis and Rockefeller cultivars can effectively be used as a raw material in beer production; on the other hand, malt from Elixer cultivar, found with higher antioxidant contents, may be used as an additive to be applied in a small quantity in the mashing process in order to enhance the beer in terms of its potential health benefits.

Quality and Pro-Healthy Properties of Belgian Witbier-Style Beers Relative to the Cultivar of Winter Wheat and Raw Materials Used

Unmalted wheat grain and barley malt are the basic materials used in the production of Belgian wheat beers known as Witbier. A change in the ingredients defined in the recipe, by which part of the unmalted wheat is replaced with wheat malt, can positively affect the quality of the beverage produced. The purpose of the study was to brew Witbier-style beers made from four cultivars of winter wheat, with a 50% share of unmalted wheat and barley malt as well as Witbier-style beers made from four wheat cultivars, where 25% of unmalted wheat was replaced with wheat malt. Physicochemical and sensory analyzes showed mild differences in the quality of the beer products, more specifically higher alcohol content (by 11.33%) were found in beers made without the addition of wheat malt, while higher sensory attractiveness and 17.13% higher total polyphenol content were identified in beers enhanced with wheat malt. Phenolic compounds were identified using UPLC-PDA-MS/MS. The highest flavanol content, including kaempferol 3-O-rhamnoside-7-O-pentoside, was found in beers produced using wheat grains of the ‘Elixer’ cultivar, whether or not wheat malt was added; the values were 1.31 mg/L in E50 beer, and 1.39 mg/L in E25 beer. The same beer samples with the highest antioxidant and antiradical activity were found (in E25 beer, 2.35 mmol TE/L, and in E50 beer, 2.12 mmol Fe^2+/L). The present findings show that the investigated wheat cultivars may be used in beer production, whereas replacing part of unmalted wheat with wheat malt can improve the sensory profile of the beer produced.

Effect of Moringa stenopetala leaf extracts on the physicochemical characteristics and sensory properties of lagered beer

Flavor instability resulting from beer storage and oxidation is the most important quality-related problem in the brewing industry. This study evaluated the influence of adding 80% ethanolic extract of Moringa stenopetala leaf to lagered beer at 400, 600, and 800 ppm concentrations for 30-, 60-, and 90-day storage time at room temperature. The effect of physicochemical properties of the beer incorporated with leaf extract of Moringa stenopetala (LEMS) was evaluated using the American Society of Brewing Chemists method of analysis. Sensory acceptability of the beer treated with LEMS was evaluated using nine hedonic scales over a period of storage time. Original gravity (11.06-11.08), apparent extract (3.68-3.77), pH (4.23-4.40), vicinal diketone (0.07-0.09), and alcohol content (4.76-4.81) were not altered by the incorporation of LEMS at any level of treatment and over a period of storage time. The beer color (8.88-9.70 EBC), bitterness (13.62-15.56 bitterness unit), calcium ion (44.18-52.04 ppm), and foam stability (201.5-246.5) of beer increased with increasing LEMS concentration, but a significant haziness reduction (1.23-0.63) was observed. However, the storage time decreased both haziness and foam stability of LEMS-incorporated beer. The incorporation of LEMS at an optimum level kept its quality for 90 days better than the usual antioxidant (potassium metabisulfite) added in beer. The sensory analysis also supported the beer treated with 600 ppm of LEMS as the best overall acceptability. The result indicates a promising use of LEMS as a functional ingredient in beer to reduce beer oxidation probability and keep its freshness for a period of storage time.

Composition and biochemical properties of ale beer enriched with lignans from Schisandra chinensis Baillon (omija) fruits

To develop a beverage with high antioxidant capacity and desirable sensory characteristics, Schisandra chinensis (omija) fruits were added to ale type beer at different time points of the brewing process. The phenolic compounds contents in beer were found to be dependent at the moment of the addition of omija fruit. Addition of omija fruits at the initiation of boiling imparted highest oxidative stability to beer and resulted in highest total phenolic and flavonoid contents in ale beer (606.82 mg GAE/L and 406.75 mg QE/L, respectively). The amounts of schisandrin, gomisin A and gomisin B in beer were 12.10 mg/mL, 3.12 mg/mL and 0.86 mg/mL, respectively. Taken together, it is hypothesized that the addition of omija fruits to traditional brewing process can improve the development of value-added beer products.

Molecular Characterization of Arabinoxylan from Wheat Beer, Beer Foam and Defoamed Beer

This research was to explore the distribution and some molecular characterization of arabinoxylan in wheat beer (B), beer foam (BF) and defoamed beer (DB) because of the crucial influences of arabinoxylan on wheat beer and its foam. The purified arabinoxylan from B, BF, and DB were fractionated by ethanol of 50%, 67%, 75%, and 80%. The monosaccharide composition, substitution degree (Ara/Xyl ratio, A/X), and average degrees of polymerization (avDP) of arabinoxylan were investigated. Molecular weight and microstructure were also involved in this study by GPC-LLS and SEM, respectively. Under the same ethanol concentration, the arabinoxylan content in the BF was higher than the other two, respectively, and it was precipitated in BF fraction with 50% ethanol which accounted for 80.84% of the total polysaccharides. Meanwhile, the greatest substitution degree (A/X) and highest value of avDP of the arabinoxylan was found in all beer foam fractions regardless of the concentration of ethanol used. The average degrees of polymerization (avDP) of arabinoxylan displayed a significant difference (p < 0.05) among B, BF, and DB. Furthermore, arabinoxylan presented varied microstructure with irregular lamellas and spherical structures and the weight-average molecular weight (Mw) of arabinoxylan showed the lowest values in BF, while the largest values were shown in DB. Therefore, arabinoxylan was more accumulated in beer foam, especially in 50% ethanol, characterised by greater value of A/X and avDP, as well as lower Mw. It was suggested that the arabinoxylan played important roles in maintaining wheat beer foam characteristics.