Two-step radiosynthesis of [18F]N-succinimidyl-4-fluorobenzoate ([18F]SFB)

7-[18F]Fluoro-8-azaisatoic Anhydrides: Versatile Prosthetic Groups for the Preparation of PET Tracers

18F-Fluorination of sensitive molecules is often challenging, but can be accomplished under suitably mild conditions using radiofluorinated prosthetic groups (PGs). Herein, 1-alkylamino-7-[18F]fluoro-8-azaisatoic anhydrides ([18F]AFAs) are introduced as versatile 18F-labeled building blocks that can be used as amine-reactive or "click chemistry" PGs. [18F]AFAs were efficiently prepared within 15 min by "on cartridge" radiolabeling of readily accessible trimethylammonium precursors. Conjugation with a range of amines afforded the corresponding 2-alkylamino-6-[18F]fluoronicotinamides in radiochemical conversions (RCCs) of 15-98%. In addition, radiolabeling of alkyne- or azide-functionalized precursors with azidopropyl- or propargyl-substituted [18F]AFAs using Cu-catalyzed click cycloaddition afforded the corresponding conjugates in RCCs of 44-88%. The practical utility of the PGs was confirmed by the preparation of three 18F-labeled PSMA ligands in radiochemical yields of 28-42%. Biological evaluation in rats demonstrated excellent in vivo stability of all three conjugates. In addition, one conjugate ([18F]JK-PSMA-15) showed favorable imaging properties for high-contrast visualization of small PSMA-positive lesions.

Fully automated 18F-fluorination of N-succinimidyl-4-[18F]fluorobenzoate ([18F]SFB) for indirect labelling of nanobodies

N-succinimidyl-4-[¹⁸F]fluorobenzoate ([¹⁸F]SFB), a widely used labeling agent to introduce the 4-[¹⁸F]fluorobenzoyl-prosthetic group, is normally obtained in three consecutive steps from [¹⁸F]fluoride ion. Here, we describe an efficient one-step labeling procedure of [¹⁸F]SFB starting from a tin precursor. This method circumvents volatile radioactive side-products and simplifies automatization. [¹⁸F]SFB was obtained after HPLC purification in a yield of 42 + 4% and a radiochemical purity (RCP) > 99% (n = 6). In addition, we investigate the automation of the coupling of [¹⁸F]SFB to a nanobody (cAbBcII10, targeting β-lactamase enzyme) and purification by size exclusion chromatography (PD-10 desalting column) to remove unconjugated reagent. Production and use of [¹⁸F]SFB were implemented on a radiosynthesis unit (Neptis^®). The fully automated radiosynthesis process including purification and formulation required 160 min of synthesis time. [¹⁸F]SFB-labeled nanobody was obtained in a yield of 21 + 2% (activity yield 12 + 1% non-decay corrected) and a radiochemical purity (RCP) of > 95% (n = 3). This approach simplifies [¹⁸F]SFB synthesis to one-step, enhances the yield in comparison to the previous report and enables the production of radiolabeled nanobody on the same synthesis module.

Kinetic isotope effects and synthetic strategies for deuterated carbon-11 and fluorine-18 labelled PET radiopharmaceuticals

The deuterium labelling of pharmaceuticals is a useful strategy for altering pharmacokinetic properties, particularly for improving metabolic resistance. The pharmacological effects of such metabolites are often assumed to be negligible during standard drug discovery and are factored in later at the clinical phases of development, where the risks and benefits of the treatment and side-effects can be wholly assessed. This paradigm does not translate to the discovery of radiopharmaceuticals, however, as the confounding effects of radiometabolites can inevitably show in preliminary positron emission tomography (PET) scans and thus complicate interpretation. Consequently, the formation of radiometabolites is crucial to take into consideration, compared to non-radioactive metabolites, and the application of deuterium labelling is a particularly attractive approach to minimise radiometabolite formation. Herein, we provide a comprehensive overview of the deuterated carbon-11 and fluorine-18 radiopharmaceuticals employed in PET imaging experiments. Specifically, we explore six categories of deuterated radiopharmaceuticals used to investigate the activities of monoamine oxygenase (MAO), choline, translocator protein (TSPO), vesicular monoamine transporter 2 (VMAT2), neurotransmission and the diagnosis of Alzheimer's disease; from which we derive four prominent deuteration strategies giving rise to a kinetic isotope effect (KIE) for reducing the rate of metabolism. Synthetic approaches for over thirty of these deuterated radiopharmaceuticals are discussed from the perspective of deuterium and radioisotope incorporation, alongside an evaluation of the deuterium labelling and radiolabelling efficacies across these independent studies. Clinical and manufacturing implications are also discussed to provide a more comprehensive overview of how deuterated radiopharmaceuticals may be introduced to routine practice.

Fluorine-18 labelled building blocks for PET tracer synthesis

This review presents a comprehensive overview of the synthesis and application of fluorine-18 labelled building blocks since 2010.

(18)F-Labeling of Arenes and Heteroarenes for Applications in Positron Emission Tomography

Diverse radiochemistry is an essential component of nuclear medicine; this includes imaging techniques such as positron emission tomography (PET). As such, PET can track diseases at an early stage of development, help patient care planning through personalized medicine and support drug discovery programs. Fluorine-18 is the most frequently used radioisotope in PET radiopharmaceuticals for both clinical and preclinical research. Its physical and nuclear characteristics (97% β(+) decay, 109.8 min half-life, 635 keV positron energy) and high specific activity make it an attractive nuclide for labeling and molecular imaging. Arenes and heteroarenes are privileged candidates for (18)F-incorporation as they are metabolically robust and therefore widely used by medicinal chemists and radiochemists alike. For many years, the range of (hetero)arenes amenable to (18)F-fluorination was limited by the lack of chemically diverse precursors, and of radiochemical methods allowing (18)F-incorporation in high selectivity and efficiency (radiochemical yield and purity, specific activity, and radio-scalability). The appearance of late-stage fluorination reactions catalyzed by transition metal or small organic molecules (organocatalysis) has encouraged much research on the use of these activation manifolds for (18)F-fluorination. In this piece, we review all of the reactions known to date to install the (18)F substituent and other key (18)F-motifs (e.g., CF3, CHF2, OCF3, SCF3, OCHF2) of medicinal relevance onto (hetero)arenes. The field has changed significantly in the past five years, and the current trend suggests that the radiochemical space available for PET applications will expand rapidly in the near future.

[(18)F]Fluorobenzoyllysinepentanedioic Acid Carbamates: New Scaffolds for Positron Emission Tomography (PET) Imaging of Prostate-Specific Membrane Antigen (PSMA)

Radiolabeled urea-based low-molecular weight inhibitors of the prostate-specific membrane antigen (PSMA) are under intense investigation as imaging and therapeutic agents for prostate and other cancers. In an effort to provide agents with less nontarget organ uptake than the ureas, we synthesized four (18)F-labeled inhibitors of PSMA based on carbamate scaffolds. 4-Bromo-2-[(18)F]fluorobenzoyllysineoxypentanedioic acid (OPA) carbamate [(18)F]23 and 4-iodo-2-[(18)F]fluorobenzoyllysine OPA carbamate [(18)F]24 in particular exhibited high target-selective uptake in PSMA+ PC3 PIP tumor xenografts, with tumor-to-kidney ratios of >1 by 4 h postinjection, an important benchmark. Because of its high tumor uptake (90% injected dose per gram of tissue at 2 h postinjection) and high tumor-to-organ ratios, [(18)F]23 is promising for clinical translation. Prolonged tumor-specific uptake demonstrated by [(18)F]24, which did not reach equilibrium during the 4 h study period, suggests carbamates as alternative scaffolds for mitigating dose to nontarget tissues.

Neither azeotropic drying, nor base nor other additives: a minimalist approach to 18F-labeling

A novel radiofluorination procedure using only precursor and [¹⁸F]fluoride without the need for azeotropic drying, base and other ingredients was developed.

Single-step syntheses of no-carrier-added functionalized [18F]fluoroarenes as labeling synthons from diaryliodonium salts

Radiotracers labelled with short-lived fluorine-18 (t(1/2) = 109.7 min) are keenly sought for biomedical imaging with positron emission tomography (PET). The radiotracers are mostly required at high specific radioactivities, necessitating their radiosyntheses from cyclotron-produced no-carrier-added [(18)F]fluoride ion. PET radiotracers encompass wide structural diversity and molecular weight. Hence, diverse (18)F-labeling methodology is needed to accomplish the required radiosyntheses in a simple and rapid manner. A useful strategy is to introduce nucleophilic [(18)F]fluoride ion first into a labeling synthon that may then be applied to label the target radiotracer. Here, we show that various functionalized [(18)F]fluoroarenes may be rapidly synthesized as labeling synthons through single-step reactions of appropriate diaryliodonium salts with [(18)F]fluoride ion. Decay-corrected radiochemical yields (RCYs) varied with position of functional group, choice of electron-rich aryl ring in the diaryliodonium salt, and choice of anion. Under best conditions, (18)F-labeled fluorobenzaldehydes, fluorobenzyl halides, fluorobenzoic acid esters and fluorophenyl ketones were obtained selectively in 40-73%, 20-55%, 46-89% and 81-98% RCYs, respectively. This versatile straightforward methodology will enhance the scope for producing structurally complex, yet useful, PET radiotracers.

Site-selective radiolabeling of peptides by (18)F-fluorobenzoylation with [(18F)]SFB in solution and on solid phase: a comparative study

Peptides labeled with short-lived positron-emitting radionuclides are of outstanding interest as probes for molecular imaging by positron emission tomography (PET). Herein, the site-selective incorporation of fluorine-18 into lysine-containing peptides using the prosthetic labeling agent N-succinimidyl 4-[(18)F]fluorobenzoate ([(18)F]SFB) is described. The reaction of [(18)F]SFB with four biologically relevant resin-bound peptides was studied and optimized. For comparison, each peptide was 18F-fluorobenzoylated in solution under different conditions and the product distribution was analyzed confirming the advantages of the solid-phase approach. The method's feasibility for selective radiolabeling either at the N-terminus or at the lysine side chain was demonstrated. Labeling on solid phase with [(18)F]SFB resulted in crude (18)F-fluorobenzoylpeptides whose radiochemical purities were typically greater than 90% and that could be prepared in synthesis times from 65 to 76 min.

18F labeling of arenes

Molecular imaging has witnessed an upsurge in growth, with positron emission tomography leading the way. This trend has encouraged numerous synthetic chemists to enter the field of (18) F-radiochemistry and provide generic solutions to address the well-recognized challenges of late-stage fluorination. This Minireview focuses on recent developments in the (18)F-labeling of aromatic substrates.

Oxalic acid supported Si-18F-radiofluorination: one-step radiosynthesis of N-succinimidyl 3-(di-tert-butyl[18F]fluorosilyl)benzoate ([18F]SiFB) for protein labeling

N-Succinimidyl 3-(di-tert-butyl[(18)F]fluorosilyl)benzoate ([(18)F]SiFB), a novel synthon for one-step labeling of proteins, was synthesized via a simple (18)F-(19)F isotopic exchange. A new labeling technique that circumvents the cleavage of the highly reactive active ester moiety under regular basic (18)F-labeling conditions was established. In order to synthesize high radioactivity amounts of [(18)F]SiFB, it was crucial to partially neutralize the potassium oxalate/hydroxide that was used to elute (18)F(-) from the QMA cartridge with oxalic acid to prevent decomposition of the active ester moiety. Purification of [(18)F]SiFB was performed by simple solid-phase extraction, which avoided time-consuming HPLC and yielded high specific activities of at least 525 Ci/mmol and radiochemical yields of 40-56%. In addition to conventional azeotropic drying of (18)F(-) in the presence of [K(+)⊂2.2.2.]C(2)O(4), a strong anion-exchange (SAX) cartridge was used to prepare anhydrous (18)F(-) for nucleophilic radio-fluorination omitting the vacuum assisted drying of (18)F(-). Using a lyophilized mixture of [K(+)⊂2.2.2.]OH resolubilized in acetonitrile, the (18)F(-) was eluted from the SAX cartridge and used directly for the [(18)F]SiFB synthesis. [(18)F]SiFB was applied to the labeling of various proteins in likeness to the most commonly used labeling synthon in protein labeling, N-succinimidyl-4-[(18)F]fluorobenzoate ([(18)F]SFB). Rat serum albumin (RSA), apo-transferrin, a β-cell-specific single chain antibody, and erythropoietin were successfully labeled with [(18)F]SiFB in good radiochemical yields between 19% and 36%. [(18)F]SiFB- and [(18)F]SFB-derivatized RSA were directly compared as blood pool imaging agents in healthy rats using small animal positron emission tomography. Both compounds demonstrated identical biodistributions in healthy rats, accurately visualizing the blood pool with PET.

Radiosynthesis of a new PSMA targeting ligand ([18F]FPy-DUPA-Pep)

Due to the specificity of expression of PSMA (prostate specific membrane antigen) particularly in prostate cancer cells (e.g. LNCaP), numerous PSMA ligands have been synthesized until now. In the current study, we synthesized DUPA-Pep having 2-[3-(1,3-dicarboxypropyl)ureido]pentanedioic acid (DUPA) linked via 8-aminooctanoic acid to two phenylalanine residues and chose 6-[(18)F]fluoronicotinic acid 2,3,5,6-tetrafluorophenyl ester [(18)F]FPy-TFP as a prosthetic group for coupling. [(18)F]FPy-DUPA-Pep was obtained in a radiochemical yield of 48±0.9% (decay uncorrected) within 50 min with a chemical purity of >98%.

Radiopharmaceutical chemistry for positron emission tomography

Molecular imaging is an emerging technology that allows the visualization of interactions between molecular probes and biological targets. Molecules that either direct or are subject to homeostatic controls in biological systems could be labeled with the appropriate radioisotopes for the quantitative measurement of selected molecular interactions during normal tissue homeostasis and again after perturbations of the normal state. In particular, positron emission tomography (PET) offers picomolar sensitivity and is a fully translational technique that requires specific probes radiolabeled with a usually short-lived positron-emitting radionuclide. PET has provided the capability of measuring biological processes at the molecular and metabolic levels in vivo by the detection of the gamma rays formed as a result of the annihilation of the positrons emitted. Despite the great wealth of information that such probes can provide, the potential of PET strongly depends on the availability of suitable PET radiotracers. However, the development of new imaging probes for PET is far from trivial and radiochemistry is a major limiting factor for the field of PET. In this review, we provided an overview of the most common chemical approaches for the synthesis of PET-labeled molecules and highlighted the most recent developments and trends. The discussed PET radionuclides include ¹¹C (t₁(/)₂=20.4min), ¹³N (t₁(/)₂=9.9min), ¹⁵O (t₁(/)₂=2min), ⁶⁸Ga (t₁(/)₂=68min), ¹⁸F (t₁(/)₂=109.8min), ⁶⁴Cu (t₁(/)₂=12.7h), and ¹²⁴I (t₁(/)₂=4.12d).

One step radiosynthesis of 6-[(18)F]fluoronicotinic acid 2,3,5,6-tetrafluorophenyl ester ([(18)F]F-Py-TFP): a new prosthetic group for efficient labeling of biomolecules with fluorine-18

The labeling of biomolecules for positron emission tomography (PET) with no-carrier-added fluorine-18 is almost exclusively accomplished using prosthetic groups in a two step procedure. The inherent complexity of the process renders full automation a challenge and leads to protracted synthesis times. Here we describe a new (18)F-labeled prosthetic group based on nicotinic acid tetrafluorophenyl ester. Reaction of [(18)F]fluoride at 40 degrees C with the trimethylammonium precursor afforded 6-[(18)F]fluoronicotinic acid tetrafluorophenyl ester ([(18)F]F-Py-TFP) directly in 60-70% yield. [(18)F]F-Py-TFP was conveniently purified by Sep-Pak cartridge prior to incubation with a peptide containing the RGD sequence. The desired conjugate was formed rapidly and in good yields. An in vitro receptor-binding assay for the integrin alpha(v)beta(3) was established to explore competition with peptide and peptidomimetic prepared from F-Py-TFP with (125)I-echistatin. The nonradioactive conjugates were found to possess high binding affinities with calculated K(i) values in the low nanomolar range.