Rapid, one-step, high yielding18F-labeling of an aryltrifluoroborate bioconjugate by isotope exchange at very high specific activity

Salt Metathesis: Tetrafluoroborate Anion Rapidly Fluoridates Organoboronic Acids to give Organotrifluoroborates

Tetrafluoroborate (BF₄ ^- ) has long been used as a spectator counter anion. Herein, we report an unprecedented salt metathesis between a variety of BF₄ ^- salts and a series of organoboronic acids yielding the corresponding organotrifluoroborates. We identified conditions for fast and efficient fluoridation (<1 h) with minimal workup. Fundamentally, this work discloses the proclivity of BF₄ ^- to exchange fluoride atoms with organoboronates, highlighting the lability of BF₄ ^- .

Isotope Exchange-Based 18F-Labeling Methods

¹⁸F-Labeling methods for the preparation of ¹⁸F-labeled molecular probes can be classified into electrophilic fluorination, nucleophilic fluorination, metal-F coordination, and ¹⁸F/¹⁹F isotope exchange. Isotope exchange-based ¹⁸F-labeling methods demonstrate mild conditions featuring water resistance and facile high-performance liquid chromatography-free purification in direct ¹⁸F-labeling of substrates. This paper systematically reviews isotope exchange-based ¹⁸F-labeling methods sorted by the adjacent atom bonding with F, i.e., carbon and noncarbon atoms (Si, B, P, S, Ga, Fe, etc.). The respective isotope exchange mechanism, radiolabeling condition, radiochemical yield, molar activity, and stability of the ¹⁸F-product are mainly discussed for each isotope exchange-based ¹⁸F-labeling method as well as the cutting-edge application of the corresponding ¹⁸F-labeled molecular probes.

Reaction of [18F]Fluoride at Heteroatoms and Metals for Imaging of Peptides and Proteins by Positron Emission Tomography

The ability to radiolabel proteins with [18F]fluoride enables the use of positron emission tomography (PET) for the early detection, staging and diagnosis of disease. The direct fluorination of native proteins through C-F bond formation is, however, a difficult task. The aqueous environments required by proteins severely hampers fluorination yields while the dry, organic solvents that promote nucleophilic fluorination can denature proteins. To circumvent these issues, indirect fluorination methods making use of prosthetic groups that are first fluorinated and then conjugated to a protein have become commonplace. But, when it comes to the radiofluorination of proteins, these indirect methods are not always suited to the short half-life of the fluorine-18 radionuclide (110 min). This review explores radiofluorination through bond formation with fluoride at boron, metal complexes, silicon, phosphorus and sulfur. The potential for these techniques to be used for the direct, aqueous radiolabeling of proteins with [18F]fluoride is discussed.

Fluorine-18-Labeled Fluorescent Dyes for Dual-Mode Molecular Imaging

Recent progress realized in the development of optical imaging (OPI) probes and devices has made this technique more and more affordable for imaging studies and fluorescence-guided surgery procedures. However, this imaging modality still suffers from a low depth of penetration, thus limiting its use to shallow tissues or endoscopy-based procedures. In contrast, positron emission tomography (PET) presents a high depth of penetration and the resulting signal is less attenuated, allowing for imaging in-depth tissues. Thus, association of these imaging techniques has the potential to push back the limits of each single modality. Recently, several research groups have been involved in the development of radiolabeled fluorophores with the aim of affording dual-mode PET/OPI probes used in preclinical imaging studies of diverse pathological conditions such as cancer, Alzheimer's disease, or cardiovascular diseases. Among all the available PET-active radionuclides, 18F stands out as the most widely used for clinical imaging thanks to its advantageous characteristics (t1/2 = 109.77 min; 97% β+ emitter). This review focuses on the recent efforts in the synthesis and radiofluorination of fluorescent scaffolds such as 4,4-difluoro-4-bora-diazaindacenes (BODIPYs), cyanines, and xanthene derivatives and their use in preclinical imaging studies using both PET and OPI technologies.

Synthesis and 18F-radiolabeling of thymidine AMBF3 conjugates

In pursuit of 18F-labeled nucleosides for positron emission tomography (PET) imaging, we report on the chemical and radiochemical synthesis of two thymidine (dT) analogs, dT-C5-AMBF3 and dT-N3-AMBF3, that are radiofluorinated by isotope exchange (IEX) and studied as PET imaging agents in mice with tumor xenografts. dT-C5-AMBF3 shows preferential, and tumor-specific, uptake over dT-N3-AMBF3. This work provides a new synthetic method in order to access new nucleoside tracers for PET imaging.

A Gas Phase Route to [18F]fluoroform with Limited Molar Activity Dilution

Positron emission tomography (PET) is an important imaging modality for biomedical research and drug development. PET requires biochemically selective radiotracers to realize full potential. Fluorine-18 (t1/2 = 109.8 min) is a major radionuclide for labeling such radiotracers but is only readily available in high activities from cyclotrons as [18F]fluoride ion. [18F]fluoroform has emerged for labeling tracers in trifluoromethyl groups. Prior methods of [18F]fluoroform synthesis used difluoro precursors in solution and led to high dilution with carrier and low molar activity (Am). We explored a new approach for the synthesis of [18F]fluoroform based on the radiosynthesis of [18F]fluoromethane from [18F]fluoride ion and then cobaltIII fluoride mediated gas phase fluorination. We estimate that carrier dilution in this process is limited to about 3-fold and find that moderate to high Am values can be achieved. We show that [18F]fluoroform so produced is highly versatile for rapidly and efficiently labeling various chemotypes that carry trifluoromethyl groups, thereby expanding prospects for developing new PET radiotracers.

One-Step 18F-Labeling and Preclinical Evaluation of Prostate-Specific Membrane Antigen Trifluoroborate Probes for Cancer Imaging

After the identification of the high-affinity glutamate-ureido scaffold, the design of several potent ¹⁸F- and ⁶⁸Ga-labeled tracers has allowed spectacular progress in imaging recurrent prostate cancer by targeting the prostate-specific membrane antigen (PSMA). We evaluated a series of PSMA-targeting probes that are ¹⁸F-labeled in a single step for PET imaging of prostate cancer. Methods: We prepared 8 trifluoroborate constructs for prostate cancer imaging, to study the influence of the linker and the trifluoroborate prosthetic on pharmacokinetics and image quality. After 1-step labeling by ¹⁹F-¹⁸F isotopic exchange, the radiotracers were injected in mice bearing LNCaP xenografts, with or without blocking controls, to assess specific uptake. PET/CT images and biodistribution data were acquired at 1 h after injection and compared with ¹⁸F-DCFPyL on the same mouse strain and tumor model. Results: All tracers exhibited nanomolar affinities, were labeled in good radiochemical yields at high molar activities, and exhibited high tumor uptake in LNCaP xenografts with clearance from nontarget organs. Most derivatives with a naphthylalanine linker showed significant gastrointestinal excretion. A radiotracer incorporating this linker with a dual trifluoroborate-glutamate labeling moiety showed high tumor uptake, low background activity, and no liver or gastrointestinal track accumulation. Conclusion: PSMA-targeting probes with trifluoroborate prosthetic groups represent promising candidates for prostate cancer imaging because of facile labeling while affording high tumor uptake values and contrast ratios that are similar to those obtained with ¹⁸F-DCFPyL.

Performing radiosynthesis in microvolumes to maximize molar activity of tracers for positron emission tomography

Positron emission tomography (PET) is a molecular diagnostic imaging technology to quantitatively visualize biological processes in vivo. For many applications, including imaging of low tissue density targets (e.g. neuroreceptors), imaging in small animals, and evaluation of novel tracers, the injected PET tracer must be produced with high molar activity to ensure low occupancy of biological targets and avoid pharmacologic effects. Additionally, high molar activity is essential for tracers with lengthy syntheses or tracers transported to distant imaging sites. We show that radiosynthesis of PET tracers in microliter volumes instead of conventional milliliter volumes results in substantially increased molar activity, and we identify the most relevant variables affecting this parameter. Furthermore, using the PET tracer [¹⁸F]fallypride, we illustrate that molar activity can have a significant impact on biodistribution. With full automation, microdroplet platforms could provide a means for radiochemists to routinely, conveniently, and safely produce PET tracers with high molar activity.

Facile synthesis and 18F-radiolabeling of α4β1-specific LLP2A-aryltrifluoroborate peptidomimetic conjugates

The peptidomimetic, LLP2A, is a specific, high-affinity ligand for α₄β₁ integrin receptors. Previously, several PEGylated LLP2A conjugates were evaluated in vivo as imaging agents for the detection of lymphoma, leukemia, multiple myeloma and melanoma tumours via NIR-fluorescence, ¹¹¹In-SPECT, and ⁶⁴Cu- and ⁶⁸Ga-PET imaging. Despite these successes, to date there is no report of an ¹⁸F-labeled LLP2A conjugate. Notably, fluorine-18 is a preferred radionuclide for PET imaging, yet its short half-life and general inactivity under aqueous conditions present challenges for peptide labeling. A simple method for labeling complex biomolecules can be achieved with arylboronic acids that readily capture aqueous [¹⁸F]-fluoride ion resulting in an ¹⁸F-labeled aryltrifluoroborate ([¹⁸F]-ArBF₃^-) radioprosthetic group. Herein, we present the first radiosynthesis of an ¹⁸F-labeled LLP2A conjugate by both one-step ¹⁸F-labeling and one-pot two-step ¹⁸F-labeling post-'click' conjugation of the ¹⁸F-alkynyl-ArBF₃^- prosthetic. Competition with a fluorescent conjugate of LLP2A demonstrated specific binding of the non-radioactive isotopolog ArBF₃^--PEG₂-LLP2A to α₄β₁ integrin-expressing MOLT-4 leukemia cells, as evidenced and confirmed by fluorescence microscopy. This work provides a key first step in the development of an expanding library of [¹⁸F]-R-BF₃^--LLP2A radiotracers for PET imaging.

[(18)F]-Organotrifluoroborates as Radioprosthetic Groups for PET Imaging: From Design Principles to Preclinical Applications

Positron emission tomography (PET) is revolutionizing our ability to visualize in vivo targets for target validation and personalized medicine. Of several classes of imaging agents, peptides afford high affinity and high specificity to distinguish pathologically distinct cell types by the presence of specific molecular targets. Of various available PET isotopes, [(18)F]-fluoride ion is preferred because of its excellent nuclear properties and on-demand production in hospitals at Curie levels. However, the short half-life of (18)F and its lack of reactivity in water continue to challenge peptide labeling. Hence, peptides are often conjugated to a metal chelator for late-stage, one-step labeling. Yet radiometals, while effective, are neither as desirable nor as available as [(18)F]-fluoride ion. Despite considerable past success in identifying semifeasible radiosyntheses, significant challenges continue to confound tracer development. These interrelated challenges relate to (1) isotope/prosthetic choice; (2) bioconjugation for high affinity; (3) high radiochemical yields, (4) specific activities of >1 Ci/μmol to meet FDA microdose requirements; and (5) rapid clearance and in vivo stability. These enduring challenges have been extensively highlighted, while a single-step, operationally simple, and generally applicable means of labeling a peptide with [(18)F]-fluoride ion in good yield and high specific activity has eluded radiochemists and nuclear medicine practitioners for decades. Radiosynthetic ease is of primordial importance since multistep labeling reactions challenge clinical tracer production. In the past decade, as we sought to meet this challenge, appreciation of reactions with aqueous fluoride led us to consider organotrifluoroborate (RBF3(-)) synthesis as a means of rapid aqueous peptide labeling. We have applied principles of mechanistic chemistry, knowledge of chemical reactivity, and synthetic chemistry to design stable RBF3(-)s. Over the past 10 years, we have developed several new [(18)F]-RBF3(-) radioprosthetic groups, all of which guarantee radiosynthetic ease while in most cases providing high tumor:nontumor (T:NT) ratios and moderate-to-high tumor uptake. Although others have developed methods for labeling of peptides with [(18)F]-silylfluorides or [(18)F]-Al-NOTA chelates, this Account focuses on the synthesis of [(18)F]-organotrifluoroborates. In this Account, I detail mechanistic, kinetic, thermodynamic, synthetic, and radiosynthetic approaches that enabled the translation of fundamental principles regarding the chemistry of RBF3(-)s into a tantalizingly close realization of a clinical application of an [(18)F]-organotrifluoroborate-peptide conjugate for imaging of neuroendocrine tumors and the generalization of this method for labeling of several other peptides.

Synthesis and Evaluation of [(18) F]-Ammonium BODIPY Dyes as Potential Positron Emission Tomography Agents for Myocardial Perfusion Imaging

Recently, we demonstrated the potential of a [(18) F]-trimethylammonium BODIPY dye for cardiac imaging. This is the first example of the use of the [(18) F]-ammonium BODIPY dye for positron emission tomography (PET) myocardial perfusion imaging (MPI). In this report, we extend our study to other ammonium BODIPY dyes with different nitrogen substituents. These novel ammonium BODIPY dyes were successfully prepared and radiolabeled by the SnCl4 -assisted (18) F-(19) F isotopic exchange method. The microPET results and the biodistribution data reveal that nitrogen substituent changes have a significant effect on the in vivo and pharmacological properties of the tracers. Of the novel [(18) F]-ammonium BODIPY dyes prepared in this work, the [(18) F]-dimethylethylammonium BODIPY is superior in terms of myocardium uptake and PET imaging contrast. These results support our hypothesis that the ammonium BODIPY dyes have a great potential for use as PET/optical dual-modality MPI probes.

Synthesis and in vivo stability studies of [18F]-zwitterionic phosphonium aryltrifluoroborate/indomethacin conjugates

Conjugation of ortho-phosphonium phenyltrifluoroborates with indomethacin affords conjugates which have been radiolabeled by ¹⁸F–¹⁹F isotopic exchange in aqueous solutions and imaged by positron emission tomography in mice.

[(18)F]-Group 13 fluoride derivatives as radiotracers for positron emission tomography

The field of (18)F chemistry is rapidly expanding because of the use of this radionuclide in radiotracers for positron emission tomography (PET). Until recently, most [(18)F]-radiotracers were generated by the direct attachment of (18)F to a carbon in the organic backbone of the radiotracer. The past decade has witnessed the emergence of a new strategy based on the formation of an (18)F-group 13 element bond. This approach, which is rooted in the field of fluoride anion complexation/coordination chemistry, has led to the development of a remarkable family of boron, aluminium and gallium [(18)F]-fluoride anion complexing agents which can be conjugated with peptides and small molecules to generate disease specific PET radiotracers. This review is dedicated to the chemistry of these group 13 [(18)F]-fluorides anion complexing agents and their use in PET. Some of the key fluoride-binding motifs covered in this review include the trifluoroborate unit bound to neutral or cationic electron deficient backbones, the BF2 unit of BODIPY dyes, and AlF or GaF3 units coordinated to multidentate Lewis basic ligands. In addition to describing how these moieties can be converted into their [(18)F]-analogs, this review also dicusses their incorporation into bioconjugates for application in PET.

One-step (18)F labeling of biomolecules using organotrifluoroborates

Herein we present a general protocol for the functionalization of biomolecules with an organotrifluoroborate moiety so that they can be radiolabeled with aqueous (18)F fluoride ((18)F(-)) and used for positron emission tomography (PET) imaging. Among the β(+)-emitting radionuclides, fluorine-18 ((18)F) is the isotope of choice for PET, and it is produced, on-demand, in many hospitals worldwide. Organotrifluoroborates can be (18)F-labeled in one step in aqueous conditions via (18)F-(19)F isotope exchange. This protocol features a recently designed ammoniomethyltrifluoroborate, and it describes the following: (i) a synthetic strategy that affords modular synthesis of radiolabeling precursors via a copper-catalyzed 'click' reaction; and (ii) a one-step (18)F-labeling method that obviates the need for HPLC purification. Within 30 min, (18)F-labeled PET imaging probes, such as peptides, can be synthesized in good chemical and radiochemical purity (>98%), satisfactory radiochemical yield of 20-35% (n > 20, non-decay corrected) and high specific activity of 40-111 GBq/μmol (1.1-3.0 Ci/μmol). The entire procedure, including the precursor preparation and (18)F radiolabeling, takes 7-10 d.

[(18)F]-NHC-BF3 adducts as water stable radio-prosthetic groups for PET imaging

The radiofluorination of N-heterocyclic carbene (NHC) boron trifluoride adducts affords novel [(18)F]-positron emission tomography probes which resist hydrolytic fluoride release. The labelling protocol relies on an (18)F-(19)F isotopic exchange reaction promoted by the Lewis acid SnCl4. Modification of the NHC backbone with a maleimide functionality provides access to a model peptide conjugate which shows no evidence of defluorination when imaged in vivo.

Applications of Fluorine in Medicinal Chemistry

The role of fluorine in drug design and development is expanding rapidly as we learn more about the unique properties associated with this unusual element and how to deploy it with greater sophistication. The judicious introduction of fluorine into a molecule can productively influence conformation, pKa, intrinsic potency, membrane permeability, metabolic pathways, and pharmacokinetic properties. In addition, (18)F has been established as a useful positron emitting isotope for use with in vivo imaging technology that potentially has extensive application in drug discovery and development, often limited only by convenient synthetic accessibility to labeled compounds. The wide ranging applications of fluorine in drug design are providing a strong stimulus for the development of new synthetic methodologies that allow more facile access to a wide range of fluorinated compounds. In this review, we provide an update on the effects of the strategic incorporation of fluorine in drug molecules and applications in positron emission tomography.

Magnetic Droplet Microfluidics as a Platform for the Concentration of [18F]Fluoride and Radiosynthesis of Sulfonyl [18F]Fluoride

The radioisotope 18F is often considered the best choice for positron emission tomography (PET) owing to its desirable chemical and radiochemical properties. However, nucleophilic 18F-fluorination of large, water-soluble biomolecules, based on C-F bond formation, has traditionally been difficult. Thus, several aqueous fluorination approaches that offer significant versatility in radiopharmaceutical synthesis with sensitive targeting vectors have been developed. Furthermore, because 18F decays rapidly, production of these 18F-labeled compounds requires an automated process to reduce production time, reduce radiation exposure, and minimize losses due to the transfer of reagents during tracer synthesis. Herein, we report the use of magnetic droplet microfluidics (MDM) as a means to concentrate [18F]fluoride from the cyclotron target solution, followed by the synthesis of an 18F-labeled compound on a microfluidic platform. Using this method, we have demonstrated 18F preconcentration in a small-volume droplet through the use of anion exchanging magnetic particles. By using MDM, the preconcentration step took approximately 5 min, and the [18F]fluoride solution was preconcentrated by 15-fold. After the preconcentration step, an 18F-labeling reaction was performed on the MDM platform using the S-F bond formation in aqueous conditions to produce an arylsulfonyl [18F]fluoride compound which can be used as a prosthetic group to label PET targeting ligands. The high radiochemical purity of 95±1% was comparable to the 96% previously reported using a conventional method. In addition, when MDM was used, the total synthesis time was improved to 15 min with lower reagent volumes (50-60 μL) used.

An organotrifluoroborate for broadly applicable one-step 18F-labeling

A new zwitterionic organotrifluoroborate is appended to three radiosynthons that afford undergo facile bioconjugation to several clinically relevant peptides and one enzyme inhibitor. Molecularly complex bioconjugates are (18)F-labeled in a single aqueous step in rapid time (<15 min) without HPLC purification to afford tracers in good yields (>200 mCi, 20-40%) at high specific activity (≥3 Ci/μmol) and at >98% purity. PET imaging shows in vivo stability and tumor uptake.

Dual isotope labeling: conjugation of 32P-oligonucleotides with 18F-aryltrifluoroborate via copper(I) catalyzed cycloaddition

A one-pot-two-step labeling of an oligonucleotide with an (18)F-ArBF3(-)(aryltrifluoroborate) radioprosthetic is reported herein. In order to characterize labeling in terms of radiochemistry, phosphorus-32 was also introduced to the 5'-terminus of the oligonucleotide via enzymatic phosphorylation. A pendant azide group was subsequently conjugated to the 5'-phosphate of the oligonucleotide. Copper(I) catalyzed [2+3] cycloaddition was undertaken to conjugate an alkyne-bearing(18)F-ArBF3(-) to the oligonucleotide. Following polyacrylamide gel electrophoresis, this doubly-labeled bioconjugate exhibited decay properties of both the phosphorus-32 and fluorine-18, that were confirmed by autoradiography at selected lengths of time, which in turn provided concrete evidence of successful conjugation. These results are corroborated by HPLC analysis of the labeled material. Taken together this work demonstrates viable use of (18)F-ArBF3(-) prosthetics for labeling oligonucleotides for use in PET imaging.

Single step 18F-labeling of dimeric cycloRGD for functional PET imaging of tumors in mice

INTRODUCTION

Arylboronates afford rapid aqueous (18)F-labeling via the creation of a highly polar (18)F-aryltrifluoroborate anion ((18)F-ArBF3(-)).

HYPOTHESIS

Radiosynthesis of an (18)F-ArBF3(-) can be successfully applied to a clinically relevant peptide. To test this hypothesis, we labeled dimeric-cylcoRGD, [c(RGDfK)]2E because a) it is molecularly complex and provides a challenging substrate to test the application of this technique, and b) [c(RGDfK)]2E has already been labeled via several (18)F-labeling methods which provide for a preliminary comparison.

GOAL

To validate this labeling method in the context of a complex and clinically relevant tracer to show tumor-specific uptake ex vivo with representative PET images in vivo.

METHODS

An arylborimidine was conjugated to [c(RGDfK)]2E to give the precursor [c(RGDfK)]2E-ArB(dan), which was aliquoted and stored at -20 °C. Aliquots of 10 or 25 nmol, containing only micrograms of precursor, were labeled using relatively low levels of (18)F-activity. Following purification eight mice (pre-blocked/unblocked) with U87M xenograft tumors were injected with [c(RGDfK)]2E-(18)F-ArBF3(-) (n = 4) for ex vivo tissue dissection. Two sets of mice (pre-blocked/unblocked) were also imaged with PET-CT (n = 2).

RESULTS

The [c(RGDfK)]2E-ArB(dan) is converted within 15 min to [c(RGDfK)]2E-(18)F-ArBF3(-) in isolated radiochemical yields of ~10% (n = 3) at a minimum effective specific activity of 0.3 Ci/μmol. Biodistribution shows rapid clearance to the bladder via the kidney resulting in high tumor-to-blood and tumor-to-muscle ratios of >9 and >6 respectively while pre-blocking with [c(RGDfK)]2E showed high tumor specificity. PET imaging showed good contrast between tumor and non-target tissues confirming the biodistribution data.

CONCLUSION

An arylborimidine-RGD peptide is rapidly (18)F-labeled in one step, in good yield, at useful specific activity. Biodistribution studies with blocking controls show tumor specificity, which is corroborated by PET images. Advances in Knowledge and Implications for patient Care: Despite many antecedent examples of labeled RGD tracers, this work is the first to show direct aqueous labeling of bisRGD with an (18)F-ArBF3(-). Labeling occurs in near record rapidity (45 min) at useful effective specific activities and competitive yields for high contrast tumor specific images. As bisRGD has been imaged in humans with several prosthetics, this work suggests potential clinical applications of tracers appended with an (18)F-ArBF3(-). More generally, the ability to label a molecularly complex tracer suggests that this method could be useful to label many other peptides. Furthermore, these results portend the development of kits that use only microgram quantities of lyophilized precursor for on demand labeling. The ability to perform one-step aqueous labeling in under an hour to provide tracers with high T:NT ratios has important implications for developing radiotracers for use in fundamental research and in preclinical tracer studies.

Kit-like 18F-labeling of RGD-19F-arytrifluroborate in high yield and at extraordinarily high specific activity with preliminary in vivo tumor imaging

INTRODUCTION

Positron Emission Tomography (PET) is a rapidly expanding, cutting edge technology for preclinical evaluation, cancer diagnosis and staging, and patient management. A one-step aqueous (18)F-labeling method, which can be applied to peptides to provide functional in vivo images, has been a long-standing challenge in PET imaging. Over the past few years, we have sought a rapid and mild radiolabeling method based on the aqueous radiosynthesis of in vivo stable aryltrifluoroborate (ArBF(3)(-)) conjugates. Recent access to production levels of (18)F-Fluoride led to a fluorescent-(18)F-ArBF(3)(-) at unprecedentedly high specific activities of 15Ci/μmol. However, extending this method to labeling peptides as imaging agents has not been explored.

METHODS

In order to extend these results to a peptide of clinical interest in the context of production-level radiosynthesis, we applied this new technology for labeling RGD, measured its specific activity by standard curve analysis, and carried out a preliminary evaluation of its imaging properties.

RESULTS

RGD was labeled in excellent radiochemical yields at exceptionally high specific activity (~14Ci/μmol) (n = 3). Preliminary tumor-specific images corroborated by ex vivo biodistribution data with blocking controls show statistically significant albeit relatively low tumor uptake along with reasonably high tumor:blood ratios (n = 3).

CONCLUSIONS

Isotope exchange on a clinically useful (18)F-ArBF(3)(-) radiotracer leads to excellent radiochemical yields and exceptionally high specific activities while the anionic nature of the aryltrifluoroborate prosthetic results in very rapid clearance. Since rapid clearance of the radioactive tracer is generally desirable for tracer development, these results suggest new directions for varying linker arm composition to slightly retard clearance rather than enhancing it.

ADVANCES IN KNOWLEDGE AND IMPLICATIONS FOR PATIENT CARE

This work is the first to use production levels of (18)F-activity to directly label RGD at specific activities that are an order of magnitude higher than most reports and thereby increases the distribution window for radiotracer production and delivery.