Implementation of a new separation method to produce qualitatively improved 64 Cu

Production Review of Accelerator-Based Medical Isotopes

The production of reactor-based medical isotopes is fragile, which has meant supply shortages from time to time. This paper reviews alternative production methods in the form of cyclotrons, linear accelerators and neutron generators. Finally, the status of the production of medical isotopes in China is described.

Chelation of Theranostic Copper Radioisotopes with S-Rich Macrocycles: From Radiolabelling of Copper-64 to In Vivo Investigation

Copper radioisotopes are generally employed for cancer imaging and therapy when firmly coordinated via a chelating agent coupled to a tumor-seeking vector. However, the biologically triggered Cu²⁺-Cu⁺ redox switching may constrain the in vivo integrity of the resulting complex, leading to demetallation processes. This unsought pathway is expected to be hindered by chelators bearing N, O, and S donors which appropriately complements the borderline-hard and soft nature of Cu²⁺ and Cu⁺. In this work, the labelling performances of a series of S-rich polyazamacrocyclic chelators with [⁶⁴Cu]Cu²⁺ and the stability of the [⁶⁴Cu]Cu-complexes thereof were evaluated. Among the chelators considered, the best results were obtained with 1,7-bis [2-(methylsulfanyl)ethyl]-4,10,diacetic acid-1,4,7,10-tetraazacyclododecane (DO2A2S). DO2A2S was labelled at high molar activities in mild reaction conditions, and its [⁶⁴Cu]Cu²⁺ complex showed excellent integrity in human serum over 24 h. Biodistribution studies in BALB/c nude mice performed with [⁶⁴Cu][Cu(DO2A2S)] revealed a behavior similar to other [⁶⁴Cu]Cu-labelled cyclen derivatives characterized by high liver and kidney uptake, which could either be ascribed to transchelation phenomena or metabolic processing of the intact complex.

Highly Efficient Separation of Ultratrace Radioactive Copper Using a Flow Electrolysis Cell

Preparing compounds containing the radioisotope ⁶⁴Cu for use in positron emission tomography cancer diagnostics is an ongoing area of research. In this study, a highly efficient separation method to recover ⁶⁴Cu generated by irradiating the target ⁶⁴Ni with a proton beam was developed by employing a flow electrolysis cell (FE). This system consists of (1) applying a reduction potential for the selective adsorption of ⁶⁴Cu from the target solution when dissolved in HCl and (2) recovering the ⁶⁴Cu deposited onto the carbon working electrode by desorbing it from the FE during elution with 10 mmol/L HNO₃, which applies an oxidation potential. The ⁶⁴Cu was selectively eluted at approximately 30 min under a flow rate of 0.5 mL/min from the injection to recovery. The newly developed flow electrolysis system can separate the femtomolar level of ultratrace radioisotopes from the larger amount of target metals as an alternative to conventional column chromatography.

Novel cytotoxic 1,10-phenanthroline–triterpenoid amphiphiles with supramolecular characteristics capable of coordinating 64Cu(ii) labels

Novel 1,10-phenanthroline–triterpenoid amphiphiles formed nano-assemblies in water, coordinated Cu(ii) and 64Cu(ii) salts for potential cancer monitoring and therapy, and displayed cytotoxicity partly dependent on the formation of nano-assemblies.

Cyclotron production and radiochemical purification of terbium-155 for SPECT imaging

Background

Terbium-155 [T_1/2 = 5.32 d, Eγ = 87 keV (32%) 105 keV (25%)] is an interesting radionuclide suitable for single photon emission computed tomography (SPECT) imaging with potential application in the diagnosis of oncological disease. It shows similar decay characteristics to the clinically established indium-111 and would be a useful substitute for the diagnosis and prospective dosimetry with biomolecules that are afterwards labeled with therapeutic radiolanthanides and pseudo-radiolanthanides, such as lutetium-177 and yttrium-90. Moreover, terbium-155 could form part of the perfect “matched pair” with the therapeutic radionuclide terbium-161, making the concept of true radiotheragnostics a reality. The aim of this study was the investigation of the production of terbium-155 via the ¹⁵⁵Gd(p,n)¹⁵⁵Tb and ¹⁵⁶Gd(p,2n)¹⁵⁵Tb nuclear reactions and its subsequent purification, in order to obtain a final product in quantity and quality sufficient for preclinical application. The ¹⁵⁶Gd(p,2n)¹⁵⁵Tb nuclear reaction was performed with 72 MeV protons (degraded to ~ 23 MeV), while the ¹⁵⁵Gd(p,n)¹⁵⁵Tb reaction was degraded further to ~ 10 MeV, as well as performed at an 18 MeV medical cyclotron, to demonstrate its feasibility of production.

Result

The ¹⁵⁶Gd(p,2n)¹⁵⁵Tb nuclear reaction demonstrated higher production yields of up to 1.7 GBq, however, lower radionuclidic purity when compared to the final product (~ 200 MBq) of the ¹⁵⁵Gd(p,n)¹⁵⁵Tb nuclear reaction. In particular, other radioisotopes of terbium were produced as side products. The radiochemical purification of terbium-155 from the target material was developed to provide up to 1.0 GBq product in a small volume (~ 1 mL 0.05 M HCl), suitable for radiolabeling purposes. The high chemical purity of terbium-155 was proven by radiolabeling experiments at molar activities up to 100 MBq/nmol. SPECT/CT experiments were performed in tumor-bearing mice using [¹⁵⁵Tb]Tb-DOTATOC.

Conclusion

This study demonstrated two possible production routes for high activities of terbium-155 using a cyclotron, indicating that the radionuclide is more accessible than the exclusive mass-separated method previously demonstrated. The developed radiochemical purification of terbium-155 from the target material yielded [¹⁵⁵Tb]TbCl₃ in high chemical purity. As a result, initial cell uptake investigations, as well as SPECT/CT in vivo studies with [¹⁵⁵Tb]Tb-DOTATOC, were successfully performed, indicating that the chemical separation produced a product with suitable quality for preclinical studies.

Supplementary Information

The online version contains supplementary material available at 10.1186/s41181-021-00153-w.

Electrochemical deposition of nickel from aqueous electrolytic baths prepared by dissolution of metallic powder

A new method of preparation of aqueous electrolyte baths for electrochemical deposition of nickel targets for medical accelerators is presented. It starts with fast dissolution of metallic Ni powder in a HNO3-free solvent. Such obtained raw solution does not require additional treatment aimed to removal nitrates, such as the acid evaporation and Ni salt precipitation-dissolution. It is used directly for preparation of the nickel plating baths after dilution with water, setting up pH value and after possible addition of H3BO3. The pH of the baths ranges from alkaline to acidic. Deposition of 95% of ca. 50 mg of Ni dissolved in the bath takes ca. 3.5 h for the alkaline electrolyte while for the acidic solution it requires ca. 7 h. The Ni deposits obtained from the acidic bath are physically and chemically more stable and possess smoother and crack-free surfaces as compared to the coatings deposited from the alkaline bath. A method of estimation of concentration of H2O2 in the electrolytic bath is also proposed.

Production of a broad palette of positron emitting radioisotopes using a low-energy cyclotron: Towards a new success story in cancer imaging?

Over the last several years, positron emission tomography (PET) has matured as an indispensable component of cancer diagnostics. Owing to the large variability observed among the cancer patients and the need to personalize individual patient's diagnosis and treatment, the need for new positron emitting radioisotopes has continued to grow. This mini review opens with a brief introduction to the criteria for radioisotope selection for PET imaging. Subsequently, positron emitting radioisotopes are categorized as: established, emerging and futuristic, based on the stages of their advancement. The production methodologies and the radiochemical separation procedures for obtaining the important radioisotopes in a form suitable for preparation of radiopharmaceuticals for PET imaging are briefly discussed.

Electrochemical deposition of nickel targets from aqueous electrolytes for medical radioisotope production in accelerators: a review

This paper reviews reported methods of the electrochemical deposition of nickel layers which are used as target materials for accelerator production of medical radioisotopes. The review focuses on the electrodeposition carried out from aqueous electrolytes. It describes the main challenges related to the preparation of suitable Ni target layers, such as work with limited amounts of expensive isotopically enriched nickel; electrodeposition of sufficiently thick, smooth and free of cracks layers; and recovery of unreacted Ni isotopes from the irradiated targets and from used electrolytic baths.

In Vivo Imaging of Local Inflammation: Monitoring LPS-Induced CD80/CD86 Upregulation by PET

Purpose

The co-stimulatory molecules CD80 and CD86 are upregulated on activated antigen-presenting cells (APC). We investigated whether local APC activation, induced by subcutaneous (s.c.) inoculation of lipopolysaccharides (LPS), can be imaged by positron emission tomography (PET) with CD80/CD86-targeting ⁶⁴Cu-labelled abatacept.

Procedures

Mice were inoculated s.c. with extracellular-matrix gel containing either LPS or vehicle (PBS). Immune cell populations were analysed by flow cytometry and marker expression by RT-qPCR. ⁶⁴Cu-NODAGA-abatacept distribution was analysed using PET/CT and ex vivo biodistribution.

Results

The number of CD80⁺ and CD86⁺ immune cells at the LPS inoculation site significantly increased a few days after inoculation. CD68 and CD86 expression were higher at the LPS than the PBS inoculation site, and CD80 was only increased at the LPS inoculation site. CTLA-4 was highest 10 days after LPS inoculation, when CD80/CD86 decreased again. A few days after inoculation, ⁶⁴Cu-NODAGA-abatacept distribution to the inoculation site was significantly higher for LPS than PBS (4.2-fold). Co-administration of unlabelled abatacept or human immunoglobulin reduced tracer uptake. The latter reduced the number of CD86⁺ immune cells at the LPS inoculation site.

Conclusions

CD80 and CD86 are upregulated in an LPS-induced local inflammation, indicating invasion of activated APCs. ⁶⁴Cu-NODAGA-abatacept PET allowed following APC activation over time.

Electronic supplementary material

The online version of this article (10.1007/s11307-020-01543-3) contains supplementary material, which is available to authorized users.

Editorial for the special Issue "Jörg Steinbach"

This special issue of Journal of Labelled Compounds and Radiopharmaceuticals is dedicated to commemorate the outstanding scientific work of Jörg Steinbach, former director of the Institute of Radiopharmaceutical Cancer Research at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR) and full professor for Bioinorganic and Radiopharmaceutical Chemistry at the Technical University Dresden. Current legal regulations brought to an end the formal attachment of Professor Steinbach to the TU Dresden as well as the directorship of the institute within his 65th birthday. A festive symposium has been held at the HZDR on the occasion of his retirement on September 5th, 2018, one day after the inauguration of the new Centre for Radiopharmaceutical Tumor Research at the HZDR.