New radiolabelling chemistry: synthesis of phosphorus-[18F]fluorine compounds

"AquaF" Building Blocks for Water-Compatible SN2 18F-Fluorination of Small-Molecule Radiotracers

Despite the widespread use of hydrophilic building blocks to incorporate 18F and improve tracer pharmacokinetics, achieving effective leaving group-mediated nucleophilic 18F-fluorination in water (excluding 18F/19F-exchange) remains a formidable challenge. Here, we present a water-compatible SN2 leaving group-mediated 18F-fluorination method employing preconjugated "AquaF" (phosphonamidic fluorides) building blocks. Among 19 compact tetracoordinated pentavalent P(V)-F candidates, the "AquaF" building blocks exhibit superior water solubility, sufficient capacity for 18F-fluorination in water, and excellent in vivo metabolic properties. Two nitropyridinol leaving groups, identified from a pool of leaving group candidates that further enhance the precursor water solubility, enable 18F-fluorination in water with a 10-2 M-1 s-1 level reaction rate constant (surpassing the 18F/19F-exchange) at room temperature. With the exergonic concerted SN2 18F-fluorination mechanism confirmed, this 18F-fluorination method achieves ∼90% radiochemical conversions and reaches a molar activity of 175 ± 40 GBq/μmol (using 12.2 GBq initial activity) in saline for 12 "AquaF"-modified proof-of-concept functional substrates and small-molecule 18F-tracers. [18F]AquaF-Flurpiridaz demonstrates significantly improved radiochemical yield and molar activity compared to 18F-Flurpiridaz, alongside enhanced cardiac uptake and heart/liver ratio in targeted myocardial perfusion imaging, providing a comprehensive illustration of "AquaF" building blocks-assisted water-compatible SN2 18F-fluorination of small-molecule radiotracers.

Cu(II)-Mediated direct 18F-dehydrofluorination of phosphine oxides in high molar activity

BACKGROUND

The 18F/19F-isotope exchange method employing P(V)-centered prosthetic groups demonstrates advantages in addressing mild one-step aqueous 18F-labeling of peptides and proteins. However, the molar activity (Am) achieved through isotope exchange remains relatively low, unless employing a high initial activity of [18F]F-. To overcome this drawback, our work introduces a novel approach through a Cu-mediated direct 18F-dehydrofluorination of phosphine oxides. This method leverages the straightforward separation of the 18F-labeled product from the phosphine oxide precursors, aiming to primarily increase Am.

RESULTS

Through a 19F-dehydrofluorination efficiency test, Cu(OAc)2 was identified as the optimal oxidative metal salt, exhibiting a remarkable 100% conversion within one hour. Leveraging the straightforward separation of phosphine oxide precursors and phosphinic fluoride products, the Am of an activated ester, [18F]4, sees an impressive nearly 15-fold increase compared to the 18F/19F-isotope exchange, with the same initial activity of [18F]F-. Furthermore, this Cu(II)-mediated 18F-dehydrofluorination approach demonstrates tolerance up to 20% solvent water content, which enables the practical radiosynthesis of 18F-labeled water-soluble molecules under non-drying conditions.

CONCLUSIONS

The direct 18F-dehydrofluorination of phosphine oxide prosthetic groups has been successfully accomplished, achieving a high Am via Cu(II)-mediated oxidative addition and reductive elimination.

Synthesis of 18 F-radiolabeled organophosphine fluorides for thiol-chemoselective peptide conjugation

Two 18 F-radiolabeled organofluorophosphine fluorides ([18 F]4 and [18 F]7) for chemoselective thiol-conjugation were designed and synthesized via 18 F-19 F isotopic exchange reaction. This simple and rapid radiofluorination produced both 18 F-radiolabeled fluorides in excellent radiochemical yields (>94%) and radiochemical purity. The optimal reaction conditions are 0.05-mg substrate, 0.69 mg of potassium carbonate, and dried [18 F]F- were mixed in 100-μl anhydrous acetonitrile at room temperature for 5 min. Both of [18 F]4 and [18 F]7 showed specificity for thiol-conjugation with cysteine and have been used in the radiosynthesis of c (RGDfC). The [18 F]7 with an adamantanyl-hindered substituent displayed superior in vitro and in vivo stability.

Rapid one-step 18F-radiolabeling of biomolecules in aqueous media by organophosphine fluoride acceptors

Currently, only a few ¹⁸F-radiolabeling methods were conducted in aqueous media, with non-macroelement fluoride acceptors and stringent conditions required. Herein, we describe a one-step non-solvent-biased, room-temperature-driven ¹⁸F-radiolabeling methodology based on organophosphine fluoride acceptors. The high water tolerance for this isotope-exchange-based ¹⁸F-labeling method is attributed to the kinetic and thermodynamic preference of F/F over the OH/F substitution based on computational calculations and experimental validation. Compact [^18/19F]di-tert-butyl-organofluorophosphine and its derivatives used as ¹⁸F-labeling synthons exhibit excellent stability in vivo. The synthons are further conjugated to several biomolecular ligands such as c(RGDyk) and human serum albumin. The one-step labeled biomolecular tracers demonstrate intrinsic target imaging ability and negligible defluorination in vivo. The current method thus offers a facile and efficient ¹⁸F-radiolabeling pathway, enabling further widespread application of ¹⁸F.

The synthesis of ¹⁸F-labeled positron emission tomography (PET) tracers is difficult and typically requires anhydrous conditions. Here, the authors developed organophosphine precursors that allow for quick, high-yield synthesis of ¹⁸F-labeled probes in either organic solvents or aqueous media.

Target identification for the diagnosis and intervention of vulnerable atherosclerotic plaques beyond 18F-fluorodeoxyglucose positron emission tomography imaging: promising tracers on the horizon

Cardiovascular disease is the major cause of morbidity and mortality in developed countries and atherosclerosis is the major cause of cardiovascular disease. Atherosclerotic lesions obstruct blood flow in the arterial vessel wall and can rupture leading to the formation of occlusive thrombi. Conventional diagnostic tools are still of limited value for identifying the vulnerable arterial plaque and for predicting its risk of rupture and of releasing thromboembolic material. Knowledge of the molecular and biological processes implicated in the process of atherosclerosis will advance the development of imaging probes to differentiate the vulnerable plaque. The development of imaging probes with high sensitivity and specificity in identifying high-risk atherosclerotic vessel wall changes and plaques is crucial for improving knowledge-based decisions and tailored individual interventions. Arterial PET imaging with ¹⁸F-FDG has shown promising results in identifying inflammatory vessel wall changes in numerous studies and clinical trials. However, due to its limited specificity in general and its intense physiological uptake in the left ventricular myocardium that impair imaging of the coronary arteries, different PET tracers for the molecular imaging of atherosclerosis have been evaluated. This review describes biological, chemical and medical expertise supporting a translational approach that will enable the development of new or the evaluation of existing PET tracers for the identification of vulnerable atherosclerotic plaques for better risk prediction and benefit to patients.

Radiofluorination of a NHC-PF5 adduct: toward new probes for 18F PET imaging

The radiofluorination of N-heterocyclic carbene (NHC) phosphorus(v) fluoride adducts has been investigated. The results show that the IMe-PF₅ derivative (IMe = 1,3-dimethylimidazol-2-ylidene) undergoes a Lewis acid promoted ¹⁸F-¹⁹F isotopic exchange. The resulting radiofluorinated probe is remarkably resistant to hydrolysis both in vitro as well as in vivo.

[(18)F]-Group 13 fluoride derivatives as radiotracers for positron emission tomography

The field of (18)F chemistry is rapidly expanding because of the use of this radionuclide in radiotracers for positron emission tomography (PET). Until recently, most [(18)F]-radiotracers were generated by the direct attachment of (18)F to a carbon in the organic backbone of the radiotracer. The past decade has witnessed the emergence of a new strategy based on the formation of an (18)F-group 13 element bond. This approach, which is rooted in the field of fluoride anion complexation/coordination chemistry, has led to the development of a remarkable family of boron, aluminium and gallium [(18)F]-fluoride anion complexing agents which can be conjugated with peptides and small molecules to generate disease specific PET radiotracers. This review is dedicated to the chemistry of these group 13 [(18)F]-fluorides anion complexing agents and their use in PET. Some of the key fluoride-binding motifs covered in this review include the trifluoroborate unit bound to neutral or cationic electron deficient backbones, the BF2 unit of BODIPY dyes, and AlF or GaF3 units coordinated to multidentate Lewis basic ligands. In addition to describing how these moieties can be converted into their [(18)F]-analogs, this review also dicusses their incorporation into bioconjugates for application in PET.

Ascertaining the suitability of aryl sulfonyl fluorides for [18F]radiochemistry applications: a systematic investigation using microfluidics

Optimization of [(18)F]radiolabeling conditions and subsequent stability analysis in mobile phase, PBS buffer, and rat serum of 12 aryl sulfonyl chloride precursors with various substituents (electron-withdrawing groups, electron-donating groups, increased steric bulk, heterocyclic) were performed using an Advion NanoTek Microfluidic Synthesis System. A comparison of radiochemical yields and reaction times for a microfluidics device versus a conventional reaction vessel is reported. [(18)F]Radiolabeling of sulfonyl chlorides in the presence of competing nucleophiles, H-bond donors, and water was also assessed and demonstrated the versatility and potential utility of [(18)F]sulfonyl fluorides as synthons for indirect radiolabeling.

Imaging integrin alpha-v-beta-3 expression in tumors with an 18F-labeled dimeric RGD peptide

Integrin αv β3 receptors are expressed on activated endothelial cells during neovascularization to maintain tumor growth. Many radiolabeled probes utilize the tight and specific association between the arginine-glycine-aspartatic acid (RGD) peptide and integrin αv β3 , but one main obstacle for any clinical application of these probes is the laborious multistep radiosynthesis of (18)F. In this study, the dimeric RGD peptide, E-[c(RGDfK)]2, was conjugated with NODAGA and radiolabeled with (18)F in a simple one-pot process with a radiolabeling yield of 20%, the whole process lasting only 45 min. NODAGA-E-[c(RGDfK)]2 labeled with (18)F at a specific activity of 1.8 MBq nmol(-1) and a radiochemical purity of 100% could be achieved. The logP value of (18)F-labeled NODAGA-E-[c(RGDfK)]2 was -4.26 ± 0.02. In biodistribution studies, (18)F-NODAGA-E-[c(RGDfK)]2 cleared rapidly from the blood with 0.03 ± 0.01 percentage injected dose per gram (%ID g(-1)) in the blood at 2 h p.i., mainly via the kidneys, and showed good in vivo stability. Tumor uptake of (18)F-NODAGA-E-[c(RGDfK)]2 (3.44 ± 0.20 %ID g(-1), 2 h p.i.) was significantly lower than that of reference compounds (68) Ga-labeled NODAGA-E-[c(RGDfK)]2 (6.26 ± 0.76 %ID g(-1) ; p <0.001) and (111) In-labeled NODAGA-E-[c(RGDfK)]2 (4.99 ± 0.64 %ID g(-1) ; p < 0.01). Co-injection of an excess of unlabeled NODAGA-E-[c(RGDfK)]2 along with (18)F-NODAGA-E-[c(RGDfK)]2 resulted in significantly reduced radioactivity concentrations in the tumor (0.85 ± 0.13 %ID g(-1)). The αv β3 integrin-expressing SK-RC-52 tumor could be successfully visualized by microPET with (18)F-labeled NODAGA-E-[c(RGDfK)]2 . In conclusion, NODAGA-E-[c(RGDfK)]2 could be labeled rapidly with (18)F using a direct aqueous, one-pot method and it accumulated specifically in αv β3 integrin-expressing SK-RC-52 tumors, allowing for visualization by microPET.

Oxalic acid supported Si-18F-radiofluorination: one-step radiosynthesis of N-succinimidyl 3-(di-tert-butyl[18F]fluorosilyl)benzoate ([18F]SiFB) for protein labeling

N-Succinimidyl 3-(di-tert-butyl[(18)F]fluorosilyl)benzoate ([(18)F]SiFB), a novel synthon for one-step labeling of proteins, was synthesized via a simple (18)F-(19)F isotopic exchange. A new labeling technique that circumvents the cleavage of the highly reactive active ester moiety under regular basic (18)F-labeling conditions was established. In order to synthesize high radioactivity amounts of [(18)F]SiFB, it was crucial to partially neutralize the potassium oxalate/hydroxide that was used to elute (18)F(-) from the QMA cartridge with oxalic acid to prevent decomposition of the active ester moiety. Purification of [(18)F]SiFB was performed by simple solid-phase extraction, which avoided time-consuming HPLC and yielded high specific activities of at least 525 Ci/mmol and radiochemical yields of 40-56%. In addition to conventional azeotropic drying of (18)F(-) in the presence of [K(+)⊂2.2.2.]C(2)O(4), a strong anion-exchange (SAX) cartridge was used to prepare anhydrous (18)F(-) for nucleophilic radio-fluorination omitting the vacuum assisted drying of (18)F(-). Using a lyophilized mixture of [K(+)⊂2.2.2.]OH resolubilized in acetonitrile, the (18)F(-) was eluted from the SAX cartridge and used directly for the [(18)F]SiFB synthesis. [(18)F]SiFB was applied to the labeling of various proteins in likeness to the most commonly used labeling synthon in protein labeling, N-succinimidyl-4-[(18)F]fluorobenzoate ([(18)F]SFB). Rat serum albumin (RSA), apo-transferrin, a β-cell-specific single chain antibody, and erythropoietin were successfully labeled with [(18)F]SiFB in good radiochemical yields between 19% and 36%. [(18)F]SiFB- and [(18)F]SFB-derivatized RSA were directly compared as blood pool imaging agents in healthy rats using small animal positron emission tomography. Both compounds demonstrated identical biodistributions in healthy rats, accurately visualizing the blood pool with PET.

High-yielding aqueous 18F-labeling of peptides via Al18F chelation

The coordination chemistry of a new pentadentate bifunctional chelator (BFC), NODA-MPAA 1, containing the 1,4,7-triazacyclononane-1,4-diacetate (NODA) motif with a methylphenylacetic acid (MPAA) backbone, and its ability to form stable Al(18)F chelates were investigated. The organofluoroaluminates were easily accessible from the reaction of 1 and AlF(3). X-ray diffraction studies revealed aluminum at the center of a slightly distorted octahedron, with fluorine occupying one of the axial positions. The tert-butyl protected prochelator 7, which can be synthesized in one step, is useful for coupling to biomolecules on solid phase or in solution. High yield (55-89%) aqueous (18)F-labeling was achieved in 10-15 min with a tumor-targeting peptide 4 covalently linked to 1. Defluorination was not observed for at least 4 h in human serum at 37 °C. These results demonstrate the facile application of Al(18)F chelation using BFC 1 as a versatile labeling method for radiofluorinating other heat-stable peptides for positron emission imaging.

Inorganic approaches for radiolabelling biomolecules with fluorine-18 for imaging with positron emission tomography

Conventional methods for radiolabelling biomolecules such as proteins and peptides with fluorine-18 for PET imaging rely on carbon-fluorine bond formation and are complex and inefficient. Several non-carbon elements form strong bonds (i.e. with high bond enthalpy) with fluorine, but with lower activation energy for their formation compared to carbon-fluorine bonds, whilst preserving a relatively high kinetic stability. In particular, by incorporating boron-, aluminium- and silicon-containing prosthetic groups into biomolecules, promising results have recently been achieved in the radiolabelling with F-18-fluoride under mild aqueous conditions, affording a level of convenience, efficiency and specific activity potentially superior to those offered by conventional C-F bond formation methods. The promise already shown by these early studies heralds a new branch of bioconjugate radiochemistry involving a wider range of "fluoridephilic" elements for synthesis of PET molecular imaging agents.

Biocompatible inorganic nanoparticles for [18F]-fluoride binding with applications in PET imaging

A wide selection of insoluble nanoparticulate metal salts was screened for avid binding of [(18)F]-fluoride. Hydroxyapatite and aluminium hydroxide nanoparticles showed particularly avid and stable binding of [(18)F]-fluoride in various biological media. The in vivo behaviour of the [(18)F]-labelled hydroxyapatite and aluminium hydroxide particles was determined by PET-CT imaging in mice. [(18)F]-labelled hydroxyapatite was stable in circulation and when trapped in various tissues (lung embolisation, Subcutaneous and intramuscular), but accumulation in liver via reticuloendothelial clearance was followed by gradual degradation and release of [(18)F]-fluoride (over a period of 4 h) which accumulated in bone. [(18)F]-labelled aluminium hydroxide was also cleared to liver and spleen but degraded slightly even without liver uptake (Subcutaneous and intramuscular). Both materials have properties that are an attractive basis for the design of molecular targeted PET imaging agents labelled with (18)F.

Radiopharmaceutical chemistry for positron emission tomography

Molecular imaging is an emerging technology that allows the visualization of interactions between molecular probes and biological targets. Molecules that either direct or are subject to homeostatic controls in biological systems could be labeled with the appropriate radioisotopes for the quantitative measurement of selected molecular interactions during normal tissue homeostasis and again after perturbations of the normal state. In particular, positron emission tomography (PET) offers picomolar sensitivity and is a fully translational technique that requires specific probes radiolabeled with a usually short-lived positron-emitting radionuclide. PET has provided the capability of measuring biological processes at the molecular and metabolic levels in vivo by the detection of the gamma rays formed as a result of the annihilation of the positrons emitted. Despite the great wealth of information that such probes can provide, the potential of PET strongly depends on the availability of suitable PET radiotracers. However, the development of new imaging probes for PET is far from trivial and radiochemistry is a major limiting factor for the field of PET. In this review, we provided an overview of the most common chemical approaches for the synthesis of PET-labeled molecules and highlighted the most recent developments and trends. The discussed PET radionuclides include ¹¹C (t₁(/)₂=20.4min), ¹³N (t₁(/)₂=9.9min), ¹⁵O (t₁(/)₂=2min), ⁶⁸Ga (t₁(/)₂=68min), ¹⁸F (t₁(/)₂=109.8min), ⁶⁴Cu (t₁(/)₂=12.7h), and ¹²⁴I (t₁(/)₂=4.12d).