Structural prediction and binding analysis of hybridized aptamers

Ratiometric electrochemical aptasensor with strand displacement for insulin detection in blood samples

BACKGROUND

Diabetes patients suffer either from insulin deficiency or resistance with a high risk of severe long-term complications, thus the quantitative assessment of insulin level is highly desired for diabetes surveillance and management. Utilizing insulin-capturing aptamers may facilitate the development of affordable biosensors however, their rigid G-quadruplex structures impair conformational changes of the aptamers and diminish the sensor signals.

RESULTS

Here we report on a ratiometric, electrochemical insulin aptasensor which is achieved by hybridization of an insulin-capturing aptamer and a partially complementary ssDNA to break the rigid G-quadruplex structures. To improve the durability of the aptasensor, the capturing aptamer was immobilized on gold electrodes via two dithiol-phosphoramidite functional groups while methoxy-polyethylene glycol thiol was used as a blocking molecule. The exposure of the sensor to insulin-containing solutions induced the dissociation of the hybridized DNA accompanied by a conformational rearrangement of the capturing aptamer back into a G-quadruplex structure. The reliability of sensor readout was improved by the adoption of an AND logic gate utilizing anthraquinone and methylene blue redox probes associated to the aptamer and complementary strand, respectively. Our aptasensor possessed an improved detection limit of 0.15 nM in comparison to aptasensors without strand displacement.

SIGNIFICANCE

The sensor was adapted for detection in real blood and is ready for future PoC diagnostics. The capability of monitoring the insulin level in an affordably manner can improve the treatment for an increasing number of patients in developed and developing nations. The utilization of low-cost and versatile aptamer receptors together with the engineering of ratiometric electrochemical signal recording has the potential to considerably advance the current insulin detection technology toward multi-analyte diabetes sensors.

Screen and Optimization of an Aptamer for Alexandrium tamarense-A Common Toxin-Producing Harmful Alga

Among all the paralytic shellfish toxins (PSTs)-producing algae, Alexandrium tamarense is one of the most widespread harmful species posing a serious threat to marine resources and human health. Therefore, it is extremely important to establish a rapid and accurate monitoring method for A. tamarense that can provide early warnings of harmful algal blooms (HABs) caused by this alga and limit the contamination due to PSTs. In this study, an ssDNA library was first obtained by whole cell systematic evolution of ligands by exponential enrichment after 18 consecutive rounds of iterative screening. After sequencing in combination with subsequent multiple alignment of sequences and secondary structure simulation, the library could be classified into 2 families, namely, Family1 and Family2, according to sequence similarity. Flow cytometry was used to test the affinity and cross-reactivity of Ata19, Ata6, Ata25 and Ata29 belonging to Family2. Ata19 was selected to be modified by truncation, through which a new resultant aptamer named as Ata19-1-1 was obtained. Ata19-1-1 with a KD of 75.16 ± 11.10 nM displayed a much higher affinity than Ata19. The specificity test showed that Ata19-1-1 has the same discrimination ability as Ata19 and can at least distinguish the target microalga from other microalgae. The observation under a fluorescence microscopy showed that the A. tamarense cells labeled with Ata19-1-1 are exhibiting bright green fluorescence and could be easily identified, factually confirming the binding of the aptamer with target cells. In summary, the aptamer Ata19-1-1 produced in this study may serve as an ideal molecular recognition element for A. tamarense, which has the potential to be developed into a novel detection method for this harmful alga in the future.

Improving aptamer performance: key factors and strategies

Aptamers are functional single-stranded oligonucleotide fragments isolated from randomized libraries by Systematic Evolution of Ligands by Exponential Enrichment (SELEX), exhibiting excellent affinity and specificity toward targets. Compared with traditional antibody reagents, aptamers display many desirable properties, such as low variation and high flexibility, and they are suitable for artificial and large-scale synthesis. These advantages make aptamers have a broad application potential ranging from biosensors, bioimaging to therapeutics and other areas of application. However, the overall performance of aptamer pre-selected by SELEX screening is far from being satisfactory. To improve aptamer performance and applicability, various post-SELEX optimization methods have been developed in the last decade. In this review, we first discuss the key factors that influence the performance or properties of aptamers, and then we summarize the key strategies of post-SELEX optimization which have been successfully used to improve aptamer performance, such as truncation, extension, mutagenesis and modification, splitting, and multivalent integration. This review shall provide a comprehensive summary and discussion of post-SELEX optimization methods developed in recent years. Moreover, by discussing the mechanism of each approach, we highlight the importance of choosing the proper method to perform post-SELEX optimization.

Aptamer-modified M cell targeting liposomes for oral delivery of macromolecules

There is an urgent demand for non-invasive and high compliance delivery systems of macromolecules for long-term therapy. However, oral administration of macromolecules is hindered by low permeability and instability in the gastrointestinal (GI) tract. Therefore, we developed a novel aptamer-modified liposomes (Apt-Lip) with M cell targeting for oral delivery of exenatide (EXT). Firstly, we optimized aptamers to M cells by Cell-SELEX and aptamer truncations. The selected aptamer T-M3 (Apt-T-M3) with high binding affinity (K_d = 176 ± 108 nM) and specificity was modified on the surface of liposomes for targeting M cells. Liposomes were formulated by microfluidics system and characterized in terms of morphology, hydrodynamic diameter, zeta potential, and the efficiency of encapsulation. In comparison with non-targeting liposomes, cell uptake in M cells was significantly enhanced by Apt-Lip. Similarly, the transport efficiency of EXT was 2-fold increase using Apt-Lip in M cells. Additionally, the transepithelial electrical resistance (TEER) of M cell monolayers is significantly reduced. In ex vivo intestinal absorption study, Apt-Lip was proved to possess significantly high intestinal absorption in Peyer's patches (PPs) and M cells-specific targeting capacity. Consequently, Apt-Lip promoted the EXT transport could base not only on M cell mediated transport, but also on enhancement of paracellular permeability. In conclusion, the present study supported Apt-Lip as a promising M cell targeted delivery system for oral delivery of macromolecules.

Rapid and label-free detection of aflatoxin B1 using a rationally truncated aptamer and via circular dichroism measurement

We describe a simple aptamer assay for the rapid analysis of aflatoxin B1 (AFB1), a potently carcinogenic fungal metabolite. The original anti-AFB1 aptamer was rationally truncated, obtaining a short aptamer that displayed better performance. Different concentrations of AFB1 were detected by measuring the circular dichroism spectra of this short aptamer. The detection limit reached 0.6 nM, which was lower than that of the original aptamer (80 nM).

Mapping the binding region of aptamer targeting small molecule: Dabigatran etexilate, an anti-coagulant

Aptamers are single-stranded DNA or RNA, which have attracted considerable scientific interest due to their characteristic of specific and selective binding to target molecules. They are evolved from the in vitro process known as systematic evolution of ligands by exponential enrichment (SELEX). This paper reports a simple experimental approach to elucidate the binding region of small targets binding aptamers. A previously isolated 60-mer aptamer for the anti-coagulant dabigatran etexilate (DBG) was used for this investigation. Complimentary sequences labelled with a fluorophore and a quencher were used for testing the binding region by change in the fluorescence signal. The full-length aptamer was truncated to multiple shorter copies including a 38 nucleotides sequence that showed 47 fold high affinity compared to the original aptamer. Circular dichroism spectroscopy (CD) measurements indicate that the 38-mer is remarkably more sensitive than the parent aptamer. The truncated 38-mer sequence was used to construct a turn-on fluorescence sensor with the detection limit of 1 nM. The performance of the sensor was examined in blood serum samples and showed excellent recovery percentages exceeding 98%. The reported screening protocol could be applied to the growing small targets aptasensors that require efficient binding aptamer sequences coupled with optimum signal transduction methods.

Investigations on the interface of nucleic acid aptamers and binding targets

Nucleic acid aptamers are single-stranded DNA or RNA of 20-100 nucleotides in length that have attracted substantial scientific interest due to their ability to specifically bind to target molecules via the formation of three-dimensional structures. Compared to traditional protein antibodies, aptamers have several advantages, such as their small size, high binding affinity, specificity, flexible structure, being chemical synthesizable and modifiable, good biocompatibility, high stability and low immunogenicity, which all contribute to their widely applications in the biomedical field. To date, much progress has been made in the study and applications of aptamers, however, detailed information on how aptamers bind to their targets is still scarce. Over the past few decades, many methods have been introduced to investigate the aptamer-target binding process, such as measuring the main kinetic or thermodynamic parameters, detecting the structural changes of the binding complexes, etc. Apart from traditional physicochemical methods, various types of molecular docking programs have been applied to simulate the aptamer-target interactions, while these simulations also have limitations. To facilitate the further research on the interactions, herein, we provide a brief review to illustrate the recent advances in the study of aptamer-target interactions. We summarize the binding targets of aptamers, such as small molecules, macromolecules, and even cells. Their binding constants (KD) are also summarized. Methods to probe the aptamer-target binding process, such as surface plasmon resonance (SPR), circular dichroism spectroscopy (CD), isothermal titration calorimetry (ITC), footprinting assay, truncation and mutation assay, nuclear magnetic resonance spectroscopy (NMR), X-ray crystallography and molecular docking simulation are indicated. The binding forces mediating the aptamer-target interactions, such as hydrogen bonding, electrostatic interaction, the hydrophobic effect, π-π stacking and van der Waals forces are summarized. The challenges and future perspectives are also discussed.

Truncated aptamers for total and glycated hemoglobin, and their integration into a graphene oxide-based fluorometric method for high-throughput screening for diabetes

The authors describe the identification of an effective binding region of aptamers against glycated (HbA1c) and total haemoglobin (tHb) by using a fluorometric assay. Truncation of the originally selected aptamers from 60 to 46 and 34 nucleotides for HbA1c and tHb, respectively, enhances the affinity for their targets. Moreover, shortening the aptamer sequences leads to a better conformational change after target binding which enabled the integration of the aptamers in a graphene oxide (GO)-based fluorometric assay. First, fluorescein-labelled truncated aptamers were physically absorbed onto the surface of GO surface via π-stacking interaction. This leads to quenching of fluorescence. Once the truncated aptamers bind the target protein, a conformational change is induced which results (a) )in the release of the aptamers from the surface of GO and (b) in the restoration of green fluorescence that is measured at 515 nm. The assay can be carried out in a microtiter plate format in homogeneous solution, this avoiding the steps of immobilization, incubation, and washing that are often necessary in immunoassays. This also reduces the time and the costs of the overall assay and allows for high throughput screening for diabetes. HbA1c can be detected in the range from 5.4 to 10.6%. The assay is selective for HbA1c over other proteins that commonly exist in blood. The results obtained by using this method compare well with those of a turbidimetric immunoassay that is typically applied in clinical laboratories. Graphical abstract Truncated aptamers for total and glycated hemoglobin were selected and integrated into a graphene oxide-based fluorescence detection assay for high-throughput screening for diabetes.

Fluorometric graphene oxide-based detection of Salmonella enteritis using a truncated DNA aptamer

The work describes a fluorescence-based study for mapping the highest affinity truncated aptamer from the full length sequence and its integration in a graphene oxide platform for the detection of Salmonella enteriditis. To identify the best truncated sequence, molecular beacons and a displacement assay design are applied. In the fluorescence displacement assay, the truncated aptamer was hybridized with fluorescein and quencher-labeled complementary sequences to form a fluorescence/quencher pair. In the presence of S. enteritidis, the aptamer dissociates from the complementary labeled oligonucleotides and thus, the fluorescein/quencher pair becomes physically separated. This leads to an increase in fluorescence intensity. One of the truncated aptamers identified has a 2-fold lower dissociation constant (3.2 nM) compared to its full length aptamer (6.3 nM). The truncated aptamer selected in this process was used to develop a fluorometric graphene oxide (GO) based assay. If fluorescein-labeled aptamer is adsorbed on GO via π stacking interaction, fluorescence is quenched. However, in the presence of target (S. enteriditis), the labeled aptamers is released from surface to form a stable complex with the bacteria and fluorescence is restored, depending on the quantity of bacteria being present. The resulting assay has an unsurpassed detection limit of 25 cfu·mL^-1 in the best case. The cross reactivity to Salmonella typhimurium, Staphylococcus aureus and Escherichia coli is negligible. The assay was applied to analyze doped milk samples for and gave good recovery. Thus, we believe that the truncated aptamer/graphene oxide platform is a potential tool for the detection of S. Enteritidis. Graphical abstract Fluorescently labelled aptamer against Salmonella enteritidis was adsorbed on the surface of graphene oxide by π-stacking interaction. This results in quenching of the fluorescence of the label. Addition of Salmonella enteritidis restores fluorescence, and this effect is used for quantification of this food-borne pathogen.

Oligonucleotide Hybridization Combined with Competitive Antibody Binding for the Truncation of a High-Affinity Aptamer

Truncation can enhance the affinity of aptamers for their targets by limiting nonessential segments and therefore limiting the molecular degrees of freedom that must be overcome in the binding process. This study demonstrated a truncation protocol relying on competitive antibody binding and the hybridization of complementary oligonucleotides, using platelet derived growth factor BB (PDGF-BB) as the model target. On the basis of the immunoassay results, an initial long aptamer was truncated to a number of sequences with lengths of 36-40 nucleotides (nt). These sequences showed apparent K_D values in the picomolar range, with the best case being a 36-nt truncated aptamer with a 150-fold increase in affinity over the full-length aptamer. The observed binding energies correlated well with relative energies calculated by molecular dynamics simulations. The effect of the truncated aptamer on PDGF-BB-stimulated fibroblasts was found to be equivalent to that of the full-length aptamer.

Highly Sensitive Detection of Bisphenol A by NanoAptamer Assay with Truncated Aptamer

For the sensitive quantification of bisphenol A (BPA), we have developed NanoAptamer assay, which employs aptamer and complementary signaling DNA, a set of quantum dots (QD), and magnetic beads (MBs). Signaling DNA-QD₆₅₅ was tethered to MB-QD₅₆₅ via the aptamer. The affinity of the aptamer to BPA resulted in the release of the signaling DNA-QD₆₅₅ from the complex and hence the corresponding decrease in the QD₆₅₅ fluorescence measurement signal. Three new aptamers (23, 58, and 24-mer) were designed via truncation of the reference aptamer (73-mer). The sensitivity and selectivity of each aptamer for BPA detection via NanoAptamer assay were investigated. One of the truncated aptamers (24-mer) has shown a significantly better performance (limit of detection, LOD, 0.17 pg/mL) than the reference 73-mer aptamer (LOD, 570 pg/mL). It has also shown the best selectivity for BPA detection over BPA analogues (i.e., bisphenol B, bisphenol C, and diethylstilbestrol). It corresponded to a normalized fluorescence change of 33.7% at the environmentally relevant concentration of 1 ng/mL (1 ppb) BPA; however, the analogues remained unchanged (2.3-3.9%).

Nucleic Acid Aptamers: An Emerging Tool for Biotechnology and Biomedical Sensing

Detection of small molecules or proteins of living cells provides an exceptional opportunity to study genetic variations and functions, cellular behaviors, and various diseases including cancer and microbial infections. Our aim in this review is to give an overview of selected research activities related to nucleic acid-based aptamer techniques that have been reported in the past two decades. Limitations of aptamers and possible approaches to overcome these limitations are also discussed.

Fluorescent biosensor for sensitive analysis of oxytetracycline based on an indirectly labelled long-chain aptamer

A fluorescent assay for oxytetracycline detection is presented based on an indirectly fluorescein-labelled aptamer probe, which was fabricated through hybridization of an oxytetracycline long-chain aptamer with a FAM-labelled short-chain ssDNA.

Determination of minimal sequence for binding of an aptamer. A comparison of truncation and hybridization inhibition methods

A thermodynamic analysis of the effects of truncation or competitive hybridisation of an aptamer on target binding is presented.

Selection and characterization of DNA aptamers for use in detection of avian influenza virus H5N1

Aptamers are artificial oligonucleotides (DNA or RNA) that can bind to a broad range of targets. In diagnostic and detection assays, aptamers represent an alternative to antibodies as recognition agents. The objective of this study was to select and characterize DNA aptamers that can specifically bind to avian influenza virus (AIV) H5N1 based on Systematic Evolution of Ligands by EXponential enrichment (SELEX) and surface plasmon resonance (SPR). The selection was started with an ssDNA (single-stranded DNA) library of 10¹⁴ molecules randomized at central 74 t. For the first four selection cycles, purified hemagglutinin (HA) from AIV H5N1 was used as the target protein, and starting from the fifth cycle, entire H5N1 virus was applied in order to improve the specificity. After 13 rounds of selection, DNA aptamers that bind to the H5N1 were isolated and three aptamer sequences were characterized further by sequencing and affinity binding. Dot blot analysis was employed for monitoring the SELEX process and conducting the preliminary tests on the affinity and specificity of aptamers. With the increasing number of selection cycles, a steady increase in the color density was observed, indicating that the aptamers with good binding affinity to the target were enriched. The best aptamer candidate had a dissociation constant (KD) of 4.65 M as determined by SPR, showing a strong binding between the HA and the selected aptamer. The specificity was determined by testing non-target AIV H5N2, H5N3, H5N9, H9N2 and H7N2. Negligible cross-reactivity confirmed the high specificity of selected aptamers. The developed aptamer was then applied for detection of AIV H5N1 in spiked poultry swab samples. The obtained aptamers could open up possibilities for the development of aptamer-based medical diagnostics and detection assays for AIV H5N1. (The H5N1 used in this study was inactivated virus.).

Rational truncation of an RNA aptamer to prostate-specific membrane antigen using computational structural modeling

RNA aptamers represent an emerging class of pharmaceuticals with great potential for targeted cancer diagnostics and therapy. Several RNA aptamers that bind cancer cell-surface antigens with high affinity and specificity have been described. However, their clinical potential has yet to be realized. A significant obstacle to the clinical adoption of RNA aptamers is the high cost of manufacturing long RNA sequences through chemical synthesis. Therapeutic aptamers are often truncated postselection by using a trial-and-error process, which is time consuming and inefficient. Here, we used a "rational truncation" approach guided by RNA structural prediction and protein/RNA docking algorithms that enabled us to substantially truncateA9, an RNA aptamer to prostate-specific membrane antigen (PSMA),with great potential for targeted therapeutics. This truncated PSMA aptamer (A9L; 41mer) retains binding activity, functionality, and is amenable to large-scale chemical synthesis for future clinical applications. In addition, the modeled RNA tertiary structure and protein/RNA docking predictions revealed key nucleotides within the aptamer critical for binding to PSMA and inhibiting its enzymatic activity. Finally, this work highlights the utility of existing RNA structural prediction and protein docking techniques that may be generally applicable to developing RNA aptamers optimized for therapeutic use.

Designer tridentate mucin 1 aptamer for targeted drug delivery

A single-stranded DNA aptamer (APT) capable of targeting mucin 1 (MUC1) extracellular protein was modified to increase its drug delivery specificity toward MUC1 overexpressing cancer cell line, MCF7. The active targeting region of APT was truncated and variable repeats (one, two, or three) of this sequence were synthesized. An aptamer formed from three repeats of this active targeting region (L3) was shown to possess enhanced doxorubicin (DOX) intercalation ability, and L3-DOX complex exhibited selective cytotoxicity to MCF7 over RAW cells. Most importantly, L3 was able to evade RAW 264.7 macrophages (2-fold reduction in L3 uptake relative to APT), thus resulting in an overall 5.5-fold increase of survivability of RAW cells as compared with when free DOX was used. These results indicate that aptamer L3 has good potential for targeted drug therapeutics.

Affinity hydrogels for controlled protein release using nucleic acid aptamers and complementary oligonucleotides

Biomaterials for the precise control of protein release are important to the development of new strategies for treating human diseases. This study aimed to fundamentally understand aptamer--protein dissociation triggered by complementary oligonucleotides, and to apply this understanding to develop affinity hydrogels for controlled protein release. The results showed that the oligonucleotide tails of the aptamers played a critical role in inducing intermolecular hybridization and triggering aptamer--protein dissociation. In addition, the attachment of the oligonucleotide tails to the aptamers and the increase of hybridizing length could produce a synergistic effect on the dissociation of bound proteins from their aptamers. More importantly, pegylated complementary oligonucleotides could successfully trigger protein release from the aptamer-functionalized hydrogels at multiple time points. Based on these results, it is believed that aptamer-functionalized hydrogels and complementary oligonucleotides hold great potential of controlling the release of protein drugs to treat human diseases.

Aptamer-based molecular recognition for biosensor development

Nucleic acid aptamers are an emerging class of synthetic ligands and have recently attracted significant attention in numerous fields. One is in biosensor development. In principle, nucleic acid aptamers can be discovered to recognize any molecule of interest with high affinity and specificity. In addition, unlike most ligands evolved in nature, synthetic nucleic acid aptamers are usually tolerant of harsh chemical, physical, and biological conditions. These distinguished characteristics make aptamers attractive molecular recognition ligands for biosensing applications. This review first concisely introduces methods for aptamer discovery including upstream selection and downstream truncation, then discusses aptamer-based biosensor development from the viewpoint of signal production.