Evaluation of electrochemically synthesized sulfadimethoxine-imprinted polymer for solid-phase microextraction of sulfonamides

AGREEMIP: The Analytical Greenness Assessment Tool for Molecularly Imprinted Polymers Synthesis

Molecular imprinting technology is well established in areas where a high selectivity is required, such as catalysis, sensing, and separations/sample preparation. However, according to the Principles of Green Chemistry, it is evident that the various steps required to obtain molecularly imprinted polymers (MIPs) are far from ideal. In this regard, greener alternatives to the synthesis of MIPs have been proposed in recent years. However, although it is intuitively possible to design new green MIPs, it would be desirable to have a quantitative measure of the environmental impact of the changes introduced for their synthesis. In this regard, this work proposes, for the first time, a metric tool and software (termed AGREEMIP) to assess and compare the greenness of MIP synthesis procedures. AGREEMIP is based on 12 assessment criteria that correspond to the greenness of different reaction mixture constituents, energy requirements, and the details of MIP synthesis procedures. The input data of the 12 criteria are transformed into individual scores on a 0-1 scale that in turn produce an overall score through the calculation of the weighted average. The assessment can be performed using user-friendly open-source software, freely downloadable from mostwiedzy.pl/agreemip. The assessment result is an easily interpretable pictogram and visually appealing, showing the performance in each of the criteria, the criteria weights, and overall performance in terms of greenness. The application of AGREEMIP is presented with selected case studies that show good discrimination power in the greenness assessment of MIP synthesis pathways.

Vapor-Phase Synthesis of Molecularly Imprinted Polymers on Nanostructured Materials at Room-Temperature

Molecularly imprinted polymers (MIPs) have recently emerged as robust and versatile artificial receptors. MIP synthesis is carried out in liquid phase and optimized on planar surfaces. Application of MIPs to nanostructured materials is challenging due to diffusion-limited transport of monomers within the nanomaterial recesses, especially when the aspect ratio is >10. Here, the room temperature vapor-phase synthesis of MIPs in nanostructured materials is reported. The vapor phase synthesis leverages a >1000-fold increase in the diffusion coefficient of monomers in vapor phase, compared to liquid phase, to relax diffusion-limited transport and enable the controlled synthesis of MIPs also in nanostructures with high aspect ratio. As proof-of-concept application, pyrrole is used as the functional monomer thanks to its large exploitation in MIP preparation; nanostructured porous silicon oxide (PSiO2 ) is chosen to assess the vapor-phase deposition of PPy-based MIP in nanostructures with aspect ratio >100; human hemoglobin (HHb) is selected as the target molecule for the preparation of a MIP-based PSiO2 optical sensor. High sensitivity and selectivity, low detection limit, high stability and reusability are achieved in label-free optical detection of HHb, also in human plasma and artificial serum. The proposed vapor-phase synthesis of MIPs is immediately transferable to other nanomaterials, transducers, and proteins.

Overoxidation of Intrinsically Conducting Polymers

Intrinsically conducting polymers may undergo significant changes of molecular structure and material properties when exposed to highly oxidizing conditions or very positive electrode potentials, commonly called overoxidation. The type and extent of the changes depend on the experimental conditions and chemical environment. They may proceed already at much lower rates at lower electrode potentials because some of the processes associated with overoxidation are closely related to more or less reversible redox processes employed in electrochemical energy conversion and electrochromism. These changes may be welcome for some applications of these polymers in sensors, extraction, and surface functionalization, but in many cases, the change of properties affects the performance of the material negatively, contributing to material and device degradation. This report presents published examples, experimental observations, and their interpretations in terms of both structural and of material property changes. Options to limit and suppress overoxidation are presented, and useful applications are described extensively.

Preparation of Monolithic Fibers in Fused Silica Capillary Molds for Molecularly Imprinted Solid-Phase Microextraction

In the last three decades, the use of molecularly imprinted polymers (MIPs) in sample preparation has continuously increased due to the high selectivity that they provide to this critical step. Of particular interest is the combination of molecular imprinting polymers and solid-phase microextraction (SPME) that allows the development of rapid and environmental friendly analytical methods, with high sensitivity and selectivity. The protocol herein presented describes a very simple strategy for the direct preparation of monolithic MIPs using silica capillaries as molds by the copolymerization of methacrylic acid and ethylene glycol dimethacrylate in the presence of propazine as template. The main factors affecting the polymer synthesis (e.g., porogen, monomer, cross-linker, polymerization mixture proportions, polymerization time, and fiber thickness) are described in detail. The proposed strategy is easy to perform in any laboratory without special equipment and allows precise control of the fiber thickness, overcoming this very common drawback in MIP-based fiber preparation.

A Sensitive and Selective Electrochemical Sensor for Sulfadimethoxine Based on Electropolymerized Molecularly Imprinted Poly (o-aminophenol) Film

Background:

As a broad-spectrum antibiotic of the sulfonamide family, Sulfadimethoxine (SDM) has been widely utilized for therapeutic and growth-promoting purposes in animals. However, the use of SDM can cause residual problems. Even a low concentration of SDM in the aquatic system can exert toxic effects on target organisms and green algae. Therefore, the quantitation of SDM residues has become an important task.

Methods:

The present work describes the development of a sensitive and selective electrochemical sensor for sulfadimethoxine based on molecularly imprinted poly(o-aminophenol) film. The molecular imprinted polymer film was fabricated by electropolymerizing o-aminophenol in the presence of SDM after depositing carboxylfunctionalized multi-walled carbon nanotubes onto a glassy carbon electrode surface. SDM can be quickly removed by electrochemical methods. The imprinted polymer film was characterized by cyclic voltammetry, differential pulse voltammetry and scanning electron microscopy.

Results:

Under the selected optimal conditions, the molecularly imprinted sensor shows a linear range from 1.0 × 10-7 to 2.0 × 10-5 mol L-1 for SDM, with a detection limit of 4.0 × 10-8 mol L-1. The sensor was applied to the determination of SDM in aquaculture water samples successfully, with the recoveries ranging from 95% to 106%.

Conclusion:

The proposed sensor exhibited a high degree of selectivity for SDM in comparison to other structurally similar molecules, along with long-term stability, good reproducibility and excellent regeneration capacity. The sensor may offer a feasible strategy for the analysis of SDM in aquaculture water samples.

Trends in sensitive detection and rapid removal of sulfonamides: A review

Sulfonamides in environmental water, food, and feed are a major concern for both aquatic ecosystems and public health, because they may lead to the health risk of drug resistance. Thus, numerous sensitive detection and rapid removal methodologies have been established. This review summarizes the sample preparation techniques and instrumental methods used for sensitive detection of sulfonamides. Additionally, adsorption and photocatalysis for the rapid removal of sulfonamides are also discussed. This review provides a comprehensive perspective on future sulfonamide analyses that have good performance, and on the basic methods for the rapid removal of sulfonamides.

Ionic Liquid-based Hollow Fiber Liquid–Liquid–Liquid Microextraction Combined with Capillary Electrophoresis for the Determination of Sulfonamides in Aquaculture Waters

Ionic liquid-based hollow-fiber liquid–liquid–liquid microextraction (IL-HF-LLLME) coupled to capillary electrophoresis (CE) has been developed for the determination of six sulfonamides (SAs) in aquaculture waters. A series of extraction parameters was optimized to enhance the extraction efficiency, which included type and pore size of hollow fiber, type and composition of extraction solvent, pH value of donor phase, the concentration of acceptor phase and the mass ratio of donor phase to acceptor phase along with extraction temperature and time. Under optimal conditions, the IL-HF-LLLME-CE method provided a wide liner range for six SAs from 2 to 1,000 μg L−1 (r2 ≥ 0.9995), the limits of the detection from 0.25 to 0.48 and the enrichment factors from 122 to 230, respectively. Relative standard deviations for intra- and interday precision were 1.4–5.3% and 1.8–7.5% (n = 5), respectively. The proposed method was successfully applied for the determination of trace-level SAs in seven real-world aquaculture water samples with good recoveries (80.4–100.7%). Also, sulfamerazine and sulfamethoxazole were detected at the level of 0.52–1.60 μg L−1 in two water samples. Due to its good sensitivity, simple operation, short analysis time and eco-friendliness, the developed method has a great application potential in analysis of trace SA residues in aquaculture waters.

Key Enabling Technologies for Point-of-Care Diagnostics

A major trend in biomedical engineering is the development of reliable, self-contained point-of-care (POC) devices for diagnostics and in-field assays. The new generation of such platforms increasingly addresses the clinical and environmental needs. Moreover, they are becoming more and more integrated with everyday objects, such as smartphones, and their spread among unskilled common people, has the power to improve the quality of life, both in the developed world and in low-resource settings. The future success of these tools will depend on the integration of the relevant key enabling technologies on an industrial scale (microfluidics with microelectronics, highly sensitive detection methods and low-cost materials for easy-to-use tools). Here, recent advances and perspectives will be reviewed across the large spectrum of their applications.