Preparation and evaluation of molecularly imprinted polymer for selective recognition and adsorption of gossypol

Electro-responsive Molecularly Imprinted Polymers (E-MIPs) for Rapid Detection of Progesterone in Human Serum Samples

Rapid and reagent-free detection of progesterone (P4) is crucial in point-of-care (POC) measurement due to its important role in the human endocrine and central nervous system. Currently available technologies for P4 detection are often not rapid or require reagents, limiting their use in POC settings. In this work, a self-signaling electrochemical sensing platform for rapid detection of P4 is developed by using electroactive molecularly imprinted polymers (E-MIPs). E-MIPs possess the ability to transduce the molecular recognition event into a measurable electrochemical signal. The E-MIPs are prepared by bulk copolymerization of acrylic acid (AA) and ferrocenylmethyl methacrylate (FcMA) in the presence of P4 followed by its removal from the polymer matrix. By incorporation of ferrocene moieties, the MIP gains intrinsic electroactivity, enabling label-free and direct electrochemical detection of P4 levels. Electrochemical techniques, including cyclic voltammetry and electrochemical impedance spectroscopy, were employed to elucidate the electron transport reaction responsible for the MIP's intrinsic electroactivity. Additionally, the predetermined complementary binding sites confined to the small working area of the screen-printed carbon electrode (SPCE) within the E-MIP matrix facilitate rapid P4 binding, achieving completion within 120 s. The developed E-MIP sensing platform was used for the rapid detection of P4 levels in human serum samples. The short incubation times reported for the E-MIP sensing platform would be beneficial in minimizing the nonspecific binding in the real-world samples. We believe that the proposed E-MIP sensing platform can be applied to clinical samples for detecting fluctuations in P4 levels.

Quantification of 2,4-dichlorophenoxyacetic acid in environmental samples using imprinted polyethyleneimine with enhanced selectivity as a selective adsorbent in ambient plasma mass spectrometry

Detection and quantification of various organic chemicals in the environment is critical to track their fate and control their levels. 2,4-Dichlorophenoxyacetic acid (2,4-D) is a widely applied phenoxy herbicide with potential toxicity to fish and other aquatic organisms. In this study, we address the need for improved detection of 2,4-D by introducing a novel analytical method for its quantification. This method relies on the selective extraction of 2,4-D using MIPs and their subsequent direct analysis using ambient plasma mass spectrometry. During the synthesis, MIPs with various degrees of glycidol (GLY) functionalization were obtained. Experimental data showed that MIPs with no GLY functionalization displayed the highest adsorption capacity. Conversely, MIPs with 30% GLY functionalization exhibited the greatest selectivity for 2,4-D, rendering them valuable for extraction of 2,4-D even in the presence of other contaminants. Finally, the obtained MIPs were applied for quantification of 2,4-D in various water samples through direct analysis using a specially designed ambient plasma mass spectrometry setup. This approach improved the detection limits by 200-fold compared to pure solution analysis. The quantification of 2,4-D in river water samples yielded highly satisfactory recoveries, demonstrating the effective utility of the proposed analytical setup for real-life water sample analysis.

Molecularly Imprinted Chalcone-Branched Polyimide-Based Chemosensors with Stripe Nanopatterns for the Detection of Melittin

In this study, a chalcone-branched polyimide (CB-PI) was synthesized by the Steglich esterification reaction for selective recognition of the toxic peptide melittin (MEL). MEL was immobilized on a nanopatterned poly(dimethylsiloxane) (PDMS) mold using a conventional surface modification technique to increase binding sites. A stripe-nanopatterned thin CB-PI film was formed on a quartz crystal (QC) substrate by simultaneously performing microcontact printing and ultraviolet (UV) light dimerization using a MEL-immobilized mold. The surface morphology changes and dimensions of the molecularly imprinted polymer (MIP) films with stripe nanopatterns (S-MIP) were analyzed using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The sensing signals (Δf and Qe) of the S-MIP sensor were investigated upon adsorption in a 100-μL dilute plasma solution containing 30 μg/mL MEL, and its reproducibility, reuse, stability, and durability were investigated. The S-MIP sensor showed high sensitivity (5.49 mL/mg) and coefficient of determination (R2 = 0.999), and the detection limit (LOD) and the quantification limit (LOQ) were determined as 0.3 and 1.1 μg/mL, respectively. In addition, the selectivity coefficients (k*) calculated from the selectivity tests were 2.7-5.7, 2.1-4.3, and 2.8-4.6 for bovine serum albumin (BSA), immunoglobulin G (IgG), and apamin (APA), respectively. Our results indicate that the nanopatterned MIP sensors based on CB-PI demonstrate great potential as a sensing tool for the quantitative analysis of biomolecules.

Selective Adsorption of Quercetin by the Sol-Gel Surface Molecularly Imprinted Polymer

Quercetin, as one of the most biologically active natural flavonoids, is widely found in various vegetables, fruits and Chinese herbs. In this work, molecularly imprinted polymer (MIP) was synthesized through surface molecular imprinting technology with sol-gel polymerization mechanism on SiO₂ at room temperature using quercetin as the template, SiO₂ as the supporter, 3-aminopropyltriethoxysilane (APTES) as the functional monomer, and tetraethoxysilane (TEOS) as the cross-linker. The prepared MIP was characterized via scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR) and nitrogen adsorption measurements to validate its surface morphology, structure and functionality. SEM images revealed that the morphology of MIP was rough and spherical with the particle size of 260 nm larger than that of the support SiO₂. In the FTIR spectra of MIP, the band around 1499 cm^-1 and 2932 cm^-1 were assigned to N-H and C-H groups, respectively. The results indicated that the imprinted polymer layers were grafted on the surface of SiO₂ and the MIP had been successfully prepared. Since the specific surface area and pore volume of MIP were markedly higher than those of NIP and SiO₂ and were 52.10 m² g^-1 and 0.150 cm³ g^-1, respectively, it was evident that the imprinting process created corresponding imprinted cavities and porosity. The MIP for adsorbing quercetin was evaluated by static adsorption experiment. The results indicated that the adsorption equilibrium could be reached within 90 min and the maximum adsorption capacity was as high as 35.70 mg/g. The mechanism for adsorption kinetics and isotherm of MIP for quercetin was proved to conform the pseudo-second-order kinetics model (R² = 0.9930) and the Freundlich isotherm model (R² = 0.9999), respectively, revealing that chemical adsorption and heterogeneous surface with multilayer adsorption dominated. In contrast to non-imprinted polymer (NIP), the MIP demonstrated high selectivity and specific recognition towards quercetin whose selectivity coefficients for quercetin relative to biochanin A were 1.61. Furthermore, the adsorption capacity of MIP can be maintaining above 90% after five regeneration cycles, indicating brilliant reusability and potential application for selective adsorption of quercetin.

Development of a Plasmonic Sensor for a Chemotherapeutic Agent Cabazitaxel

Drug dosage is a crucial subject in both human and animal treatment. Administering less drug dosage may prevent treatment or make it less effective, and high drug dosage may cause a heightened risk of adverse effects, or in some cases, cost a patient's life. Also, even when the dosage is administered carefully, metabolic differences may cause different effects on different patients. Because of these considerations, monitoring drug dosage in the body is a critical and significant requirement in the health industry. Within the scope of this study, a reusable surface plasmon resonance (SPR) chip with fast response, high selectivity, and no pretreatment is produced for the chemotherapeutic agent cabazitaxel. A cabazitaxel-imprinted nanofilm was synthesized on the sensor chip surface and characterized by atomic force microscopy, ellipsometry, and contact angle measurements. Standard cabazitaxel solution and an artificial plasma sample were used for the kinetic analysis. Docetaxel, methylprednisolone, and dexamethasone were analyzed for their selectivity experiment. In addition, the repeatability and storage durability of the sensor were also evaluated. As a result of the adsorption studies, the limit of detection and limit of quantitation values were found to be 0.012 and 0.036 μg/mL, respectively. High-performance liquid chromatography analysis was used to validate the response of the cabazitaxel-imprinted sensor.

Eco-friendly fabrication of a magnetic dual-template molecularly imprinted polymer for the selective enrichment of organophosphorus pesticides for fruits and vegetables

A magnetic dual-template molecularly imprinted polymer (DMIP) was successfully prepared in an aqueous medium and used as a sorbent for the selective extraction of organophosphorus pesticides prior to analysis by high-performance liquid chromatography (HPLC). The binding properties and selectivity of DMIP toward organophosphorus were evaluated and compared with those of a non-imprinted polymer. The established magnetic dispersive solid-phase extraction (MDSPE) method using DMIP exhibited fast enrichment of the target analytes within 60 s for adsorption and 30 s for desorption. Good linearities in the range of 0.5-2000 μg L^-1 with coefficients of determination (R²) greater than 0.9930 were observed. The method provides low limits of detection of 0.062-0.195 μg L^-1 and limits of quantification of 0.210-0.640 μg L^-1 with relative standard deviations of less than 9.5% for intra- and inter-day analyses. The enrichment factors ranged from 464 to 621. Satisfactory recoveries ranged from 81.3 to 110.0% with relative standard deviations below 11%.

Molecularly imprinted polymers-A closer look at the control polymer used in determining the imprinting effect: A mini review

Molecular recognition displayed by naturally occurring receptors has continued to inspire new innovations aimed at developing systems that can mimic this natural phenomenon. Since 1930s, a technology called molecular imprinting for producing biomimetic receptors has been in place. In this technology, tailor made binding sites that selectively bind a given target analyte (also called template) are incorporated in a polymer matrix by polymerizing functional monomers and cross-linking monomers around a target analyte followed by removal of the analyte to leave behind cavities specific to the analyte. The success of the imprinting process is defined by two main figures of merit, that is, the imprinting factor, and selectivity, which are determined by comparing the amount of target analyte or structural analogue bound by the molecularly imprinted polymer (MIP) and the nonimprinted polymer (NIP). NIP is a control synthesized alongside the MIP but in the absence of the template. However, questions arise on whether these figures of merit are reliable measures of the imprinting effect because of the significant differences between the MIP and the NIP in terms of their physical and chemical characteristics. Therefore, this review critically looks into this subject, with a view of defining the best approaches for determining the imprinting effect.

Comparison of Four Adsorption Isotherm Models for Characterizing Molecular Recognition of Individual Phenolic Compounds in Porous Tailor-Made Molecularly Imprinted Polymer Films

A molecularly imprinted polymer (MIP) film using catechol as the template was designed for adsorption of a range of phenols from water. Four different isotherm models (Langmuir (LI), Freundlich (FI), Langmuir-Freundlich (L-FI), and Brunauer, Emmett, and Teller (BET)) were used to study the MIP adsorption of five phenolic compounds: phenol (Ph), 2-methylphenol (2-MP), 3-methylphenol (3-MP), 2-chlorophenol (2-CP), and 4-teroctylphenol (4-OP). Each model was evaluated for its fit with the experimental data, and key parameters, including a number of binding sites and binding site energies, were compared. Though the LI, L-FI, and BET models showed good agreement for estimation of the number of binding sites and affinity for most adsorbates, no single model was suitable for all. The LI and L-FI models gave the best fitting statistics for the Ph, 2-MP, 3-MP, and 2-CP. The recognition of 4-OP, which has much higher binding affinities than the smaller phenolic compounds not attributable to hydrophobicity alone, was explained only by the BET model, which indicates the formation of multilayers. The BET model failed only with phenol. MIPs also showed higher adsorption capacities and improved homogeneity over the analogous non-imprinted polymers.

Design and synthesis of supramolecular functional monomers bearing urea and norbornene motifs

Three sets of functional monomers namely urea-based, 2-ureido-4[1H]-primidone (UPy)-based and norbornene based functional monomers were designed and synthesized. These functional monomers (FM) were obtained in decent yields using amine and isocyanate/norbornene as starting materials. Methacrylate and styrene isocyanate with 1,4-diaminobutane/tris(2-aminoethyl)amine were chosen for the synthesis of symmetrical, asymmetrical and three-branched urea-functional monomers, respectively. UPy-based FMs were synthesized with isocyanate and 2-amino-4-hydroxy-6-methylpyrimidine. The synthesis of these monomers feature short reaction times, mild reaction conditions and no need for column chromatographic purification. Furthermore, the norbornene based FM was used for preparing molecularly imprinted polymers (MIPs) by Ring-Opening Metathesis Polymerization (ROMP). Results showed that these synthetic routes represent a convenient and useful approach for synthesis of novel functional monomers.

Molecularly Imprinted Polymers for Gossypol via Sol⁻Gel, Bulk, and Surface Layer Imprinting-A Comparative Study

Three gossypol molecularly imprinted polymers (MIPs) were prepared by bulk polymerization (MIP1), surface layer imprinting using silica gel as the support (MIP2), and the sol-gel process (MIP3). The as-prepared MIPs were characterized by SEM and nitrogen adsorption-desorption techniques to study the morphology structure. The adsorption experiments exhibited that MIP1 had adsorption capacity as high as 564 mg·g-1. The MIP2 showed faster adsorption kinetics than MIP1 and MIP3. The adsorption equilibrium could be reached for gossypol in 40 min. A selectivity study showed that the adsorption capacity of MIPs for gossypol was about 1.9 times higher than that of the structurally-similar analogs ellagic acid and 6.6 times higher than that of the quercetin. It was found that the pseudo-second-order kinetic model and the Freundlich isotherm model were more applicable for the adsorption kinetics and adsorption isotherm of gossypol binding onto the MIP1 and MIP2, respectively. Results suggested that among those three, the MIP2 was a desirable sorbent for rapid adsorption and MIP1 was suitable for selective recognition of gossypol.

Effects of sequentially applied single and combined temozolomide, hydroxychloroquine and AT101 treatment in a long-term stimulation glioblastoma in vitro model

PURPOSE

Glioblastoma multiforme (GBM) is a poorly curable disease due to its heterogeneity that enables single cells to survive treatment regimen and initiate tumor regrowth. Although some progress in therapy has been achieved in the last years, the efficient treatment of GBMs is still a clinical challenge. Besides the standard therapeutic drug temozolomide (TMZ), quinoline-based antimalarial drugs such as hydroxychloroquine (HCQ) and BH3 mimetics such as AT101 were considered as possible drugs for GBM therapy.

METHODS

We investigated the effects of sequentially applied single and combined TMZ, HCQ and AT101 treatments in a long-term stimulation GBM in vitro model. We performed all investigations in parallel in human astrocytes and two differentially TMZ-responsive human GBM cell lines and adjusted used drug concentrations to known liquor/plasma concentrations in patients. We determined amounts of dead cells and still remaining growth rates and depicted our results in a heatmap-like summary to visualize which sequential long-term treatment schedule seemed to be most promising.

RESULTS

We showed that sequential stimulations yielded higher cytotoxicity and better tumor growth control in comparison to single TMZ treatment. This was especially the case for the sequences TMZ/HCQ and TMZ + AT101/AT101 which was as effective as the non-sequential combination TMZ + AT101. Importantly, those affected both less and more TMZ-responsive glioma cell lines, whilst being less harmful for astrocytes in comparison to single TMZ treatment.

CONCLUSIONS

Sequential treatment with mechanistically different acting drugs might be an option to reduce side effects in long-term treatment, for example in local administration approaches.

Influence of Size and Shape of Silica Supports on the Sol⁻Gel Surface Molecularly Imprinted Polymers for Selective Adsorption of Gossypol

The influence of various silica gel supports with different shapes and sizes on the recognition properties of surface molecular imprinted polymers (MIPs) was investigated. MIPs for selective recognition and adsorption of gossypol were synthesized via the sol⁻gel process with a surface imprinting technique on silica gel substrates. 3-aminopropyltriethoxysilane (APTES) and tetraethoxysilane (TEOS) were chosen as the functional monomer and the cross-linker. The morphology and structure of the gossypol-MIPs were characterized using Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and a standard Brunauer⁻Emett⁻Teller (BET) analysis. Results indicated that the surface imprinted polymer layer facilitated the removal and rebinding of the template, and thus, achieved fast binding kinetics. Compared with the MIPs prepared on irregularly shaped silica with a broad particle size distribution, the MIPs using regularly-shaped silica of uniform size showed higher imprinting factor (IF), and the MIP made with a relatively larger sized (60 μm) spherical silica, demonstrated higher adsorption capacity compared to the MIPs made with smaller sized, spherical silica. The MIP prepared with 60 μm spherically shaped silica, featured a fast adsorption kinetic of 10 min, and a saturated adsorption capacity of 204 mg·g−1. The gossypol-MIP had higher selectivity (IF = 2.20) for gossypol over its structurally-similar analogs ellagic acid (IF = 1.13) and quercetin (IF = 1.20). The adsorption data of the MIP correlated well with the pseudo-second-order kinetic model and the Freundlich isotherm model, which implied that chemical adsorption dominated, and that multilayer adsorption occurred. Furthermore, the MIP exhibited an excellent regeneration performance, and the adsorption capacity of the MIP for gossypol only decreased by 6% after six reused cycles, indicating good application potential for selective adsorption of gossypol.

Bioresource derived porous carbon from cottonseed hull for removal of triclosan and electrochemical application

Biomass-derived porous carbon materials have drawn considerable attention due to their natural abundance and low cost. In this work, nitrogen enriched porous carbons (NRPCs) with large surface areas were designed and prepared from cottonseed hull via simultaneous carbonization and activation with a facile one-pot approach. The NRPCs were tunable in terms of pore structure, nitrogen content and morphology by adjusting the ratio of the carbon precursor (cottonseed hull), nitrogen source (urea), and activation agent (KOH). The as-synthesized NRPCs exhibited three-dimensional oriented and interlinked porous structure, high specific surface area (1160–2573 m² g⁻¹) and a high level of nitrogen-doping (6.02–10.7%). In a three electrode system, NRPCs prepared at 800 °C with the ratio (cottonseed hull : KOH : urea) of 1 : 1 : 2 (NRPC-112) showed a high specific capacitance of 340 F g⁻¹ at a current density of 0.5 A g⁻¹ and good rate capability (∼80% retention at a current density of 10 A g⁻¹) with 6 M KOH as electrolyte. In a two electrode cell, NRPC-112 demonstrated a high specific capacitance of 304 F g⁻¹ at 0.5 A g⁻¹ and an excellent rate capacity (∼71% retention at current density of 10 A g⁻¹) as well as excellent cycling stability (∼91% retention at 5 A g⁻¹) after 5000 cycles. Furthermore, the NRPCs exhibited an extraordinary adsorption capacity up to 205 mg g⁻¹ for emerging pollutant triclosan. The work provided a sustainable approach to prepare functional carbon materials from biomass-based resource for environment remediation and electrochemical applications.

Biomass derived nitrogen-enriched porous carbon materials from cottonseed hull for emerging pollutant triclosan removal and electrochemical application.