Improvement of the repeatability of parallel transmission at 7T using interleaved acquisition in the calibration scan

MR Imaging in the 21st Century: Technical Innovation over the First Two Decades

Clinical MRI systems have continually improved over the years since their introduction in the 1980s. In MRI technical development, the developments in each MRI system component, including data acquisition, image reconstruction, and hardware systems, have impacted the others. Progress in each component has induced new technology development opportunities in other components. New technologies outside of the MRI field, for example, computer science, data processing, and semiconductors, have been immediately incorporated into MRI development, which resulted in innovative applications. With high performance computing and MR technology innovations, MRI can now provide large volumes of functional and anatomical image datasets, which are important tools in various research fields. MRI systems are now combined with other modalities, such as positron emission tomography (PET) or therapeutic devices. These hybrid systems provide additional capabilities.

In this review, MRI advances in the last two decades will be considered. We will discuss the progress of MRI systems, the enabling technology, established applications, current trends, and the future outlook.

Spatial and temporal variations of flip-angle distributions in the human brain using an eight-channel parallel transmission system at 7T: comparison of three radiofrequency excitation methods

We investigated the spatial and temporal variations of flip-angle (FA) distributions in the human brain from multiple scans, using an eight-channel parallel transmission (pTx) system at 7T. Nine healthy volunteers were scanned in five sessions using three radiofrequency excitation techniques each time: circular polarization (CP), static pTx, and dynamic pTx. We calculated the coefficients of variation of the FA values within the brain area to evaluate the variations, and the maximum intersession differences in the FA values (D_max), comparing them between the three methods. The coefficients of variation decreased in the following order: CP, static pTx, and dynamic pTx (median: 20.1%, 13.6%, and 5.7%, respectively; p < 0.001). The average D_max values were significantly higher for the static pTx (5.4°) than for the dynamic pTx (2.8°) and CP (1.7°) methods (p = 0.004 and 0.001, respectively). Compared to the CP method, the dynamic pTx method at 7T can efficiently minimize spatial variations in the FA distribution with a mild increase in temporal variations. The static pTx method exhibited a remarkably wide temporal variation.

Robust 3D Bloch-Siegert based B 1 + mapping using multi-echo general linear modeling

PURPOSE

Quantitative MRI applications, such as mapping the T₁ time of tissue, puts high demands on the accuracy and precision of transmit field ( B 1 + ) estimation. A candidate approach to satisfy these requirements exploits the difference in phase induced by the Bloch-Siegert frequency shift (BSS) of 2 acquisitions with opposite off-resonance frequency radiofrequency pulses. Interleaving these radiofrequency pulses ensures robustness to motion and scanner drifts; however, here we demonstrate that doing so also introduces a bias in the B 1 + estimates.

THEORY AND METHODS

It is shown here by means of simulation and experiments that the amplitude of the error depends on MR pulse sequence parameters, such as repetition time and radiofrequency spoiling increment, but more problematically, on the intrinsic properties, T₁ and T₂ , of the investigated tissue. To solve these problems, a new approach to BSS-based B 1 + estimation that uses a multi-echo acquisition and a general linear model to estimate the correct BSS-induced phase is presented.

RESULTS

In line with simulations, phantom and in vivo experiments confirmed that the general linear model-based method removed the dependency on tissue properties and pulse sequence settings.

CONCLUSION

The general linear model-based method is recommended as a more accurate approach to BSS-based B 1 + mapping.

Parallel Transmission for Ultrahigh Field MRI

Magnetic resonance imaging (MRI) has been driven toward ultrahigh magnetic fields (UHF) in order to benefit from correspondingly higher signal-to-noise ratio and spectral resolution. Technological challenges associated with UHF, such as increased radiofrequency (RF) energy deposition and RF excitation inhomogeneity, limit realization of the full potential of these benefits. Parallel RF transmission (pTx) enables decreases in the inhomogeneity of RF excitations and in RF energy deposition by using multiple-transmit RF coils driven independently and operating simultaneously. pTx plays a fundamental role in UHF MRI by bringing the potential applications of UHF into reality. In this review article, we review the recent developments in pTx pulse design and RF safety in pTx. Simultaneous multislice imaging and inner volume imaging using pTx are reviewed with a focus on UHF applications. Emerging pTx design approaches using improved pTx design frameworks and calibrations are reviewed together with calibration-free approaches that remove the necessity of time-consuming calibrations necessary for successful pTx. Lastly, we focus on the safety of pTx that is improved by using intersubject variability analysis, proactively managing pTx and temperature-based pTx approaches.