3D printing with MRI in pediatric applications

Enhancing surgical planning for abdominal tumors in children through advanced 3D visualization techniques: a systematic review of future prospects

Introduction

Preoperative three-dimensional (3D) reconstruction using sectional imaging is increasingly used in challenging pediatric cases to aid in surgical planning. Many case series have described various teams' experiences, discussing feasibility and realism, while emphasizing the technological potential for children. Nonetheless, general knowledge on this topic remains limited compared to the broader research landscape. The aim of this review was to explore the current devices and new opportunities provided by preoperative Computed Tomography (CT) scans or Magnetic Resonance Imaging (MRI).

Methods

A systematic review was conducted to screen pediatric cases of abdominal and pelvic tumors with preoperative 3D reconstruction published between 2000 and 2023.

Discussion

Surgical planning was facilitated through virtual reconstruction or 3D printing. Virtual reconstruction of complex tumors enables precise delineation of solid masses, formulation of dissection plans, and suggests dedicated vessel ligation, optimizing tissue preservation. Vascular mapping is particularly relevant for liver surgery, large neuroblastoma with imaging-defined risk factors (IDRFs), and tumors encasing major vessels, such as complex median retroperitoneal malignant masses. 3D printing can facilitate specific tissue preservation, now accessible with minimally invasive procedures like partial nephrectomy. The latest advancements enable neural plexus reconstruction to guide surgical nerve sparing, for example, hypogastric nerve modelling, typically adjacent to large pelvic tumors. New insights will soon incorporate nerve plexus images into anatomical segmentation reconstructions, facilitated by non-irradiating imaging modalities like MRI.

Conclusion

Although not yet published in pediatric surgical procedures, the next anticipated advancement is augmented reality, enhancing real-time intraoperative guidance: the surgeon will use a robotic console overlaying functional and anatomical data onto a magnified surgical field, enhancing robotic precision in confined spaces.

Use of modern three-dimensional imaging models to guide surgical planning for local control of pediatric extracranial solid tumors

INTRODUCTION

In complex pediatric surgical oncology, surgical planning is contingent upon data gathered from preoperative imaging. Three-dimensional (3D) modeling and printing has been shown to be beneficial for adult presurgical planning, though pediatric literature is less robust. The study reviews our institutional experience with the use of 3D image segmentation and printed models in approaching resection of extracranial solid tumors in children.

METHODS

This is a single institutional series from 2021 to 2023. Models were based on computed tomography and magnetic resonance imaging studies, optimized for 3D imaging. The feasibility and creation of the models is reviewed, including specific techniques, software, and printing materials from our institution. Clinical implications for surgical planning are also described, along with detailed preoperative and intraoperative images.

RESULTS

3D modeling and printing was performed for four pediatric patients diagnosed with extracranial solid tumors. Diagnoses included Ewing sarcoma, hepatoblastoma, synovial sarcoma, and osteosarcoma. No intraoperative complications or discrepancies with the preoperative 3D-printed model were noted. No evidence of local recurrence was identified in any patient thus far.

CONCLUSION

Our institutional series demonstrates a wide spectrum of clinical application for 3D modeling and printing technology within pediatric surgical oncology. This technology may aid in surgical planning for both resection and reconstruction, can be applied to a diverse breadth of diagnoses, and may potentially augment patient and/or family education about their condition.

The Integration of 3D Virtual Reality and 3D Printing Technology as Innovative Approaches to Preoperative Planning in Neuro-Oncology

Our study explores the integration of three-dimensional (3D) virtual reality (VR) and 3D printing in neurosurgical preoperative planning. Traditionally, surgeons relied on two-dimensional (2D) imaging for complex neuroanatomy analyses, requiring significant mental visualization. Fortunately, nowadays advanced technology enables the creation of detailed 3D models from patient scans, utilizing different software. Afterwards, these models can be experienced through VR systems, offering comprehensive preoperative rehearsal opportunities. Additionally, 3D models can be 3D printed for hands-on training, therefore enhancing surgical preparedness. This technological integration transforms the paradigm of neurosurgical planning, ensuring safer procedures.

3D printing in pediatric surgery

Pediatric surgery presents a unique challenge, requiring a specialized approach due to the intricacies of compact anatomy and the presence of distinct congenital features in young patients. Surgeons are tasked with making decisions that not only address immediate concerns but also consider the evolving needs of children as they grow. The advent of three-dimensional (3D) printing has emerged as a valuable tool to facilitate a personalized medical approach. This paper starts by outlining the basics of 3D modeling and printing. We then delve into the transformative role of 3D printing in pediatric surgery, elucidating its applications, benefits, and challenges. The paper concludes by envisioning the future prospects of 3D printing, foreseeing advancements in personalized treatment approaches, improved patient outcomes, and the continued evolution of this technology as an indispensable asset in the pediatric surgical arena.

Advanced Strategies for the Fabrication of Multi-Material Anatomical Models of Complex Pediatric Oncologic Cases

The printing and manufacturing of anatomical 3D models has gained popularity in complex surgical cases for surgical planning, simulation and training, the evaluation of anatomical relations, medical device testing and patient-professional communication. 3D models provide the haptic feedback that Virtual or Augmented Reality (VR/AR) cannot provide. However, there are many technologies and strategies for the production of 3D models. Therefore, the aim of the present study is to show and compare eight different strategies for the manufacture of surgical planning and training prototypes. The eight strategies for creating complex abdominal oncological anatomical models, based on eight common pediatric oncological cases, were developed using four common technologies (stereolithography (SLA), selectie laser sinterning (SLS), fused filament fabrication (FFF) and material jetting (MJ)) along with indirect and hybrid 3D printing methods. Nine materials were selected for their properties, with the final models assessed for application suitability, production time, viscoelastic mechanical properties (shore hardness and elastic modulus) and cost. The manufacturing and post-processing of each strategy is assessed, with times ranging from 12 h (FFF) to 61 h (hybridization of FFF and SLS), as labor times differ significantly. Cost per model variation is also significant, ranging from EUR 80 (FFF) to EUR 600 (MJ). The main limitation is the mimicry of physiological properties. Viscoelastic properties and the combination of materials, colors and textures are also substantially different according to the strategy and the intended use. It was concluded that MJ is the best overall option, although its use in hospitals is limited due to its cost. Consequently, indirect 3D printing could be a solid and cheaper alternative.

Impact of new technologies on neurology in Spain. Review by the New Technologies Ad-Hoc Committee of the Spanish Society of Neurology

INTRODUCTION

New technologies are increasingly widespread in biomedicine. Using the consensus definition of new technologies established by the New Technologies Ad-Hoc Committee of the Spanish Society of Neurology (SEN), we evaluated the impact of these technologies on Spanish neurology, based on communications presented at Annual Meetings of the SEN.

MATERIAL AND METHODS

We defined the concept of new technology in neurology as a novel technology or novel application of an existing technology, characterised by a certain degree of coherence persisting over time, with the potential to have an impact on the present and/or future of neurology. We conducted a descriptive study of scientific communications presented at the SEN's annual meetings from 2012 to 2018, analysing the type of technology, the field of neurology, and the geographical provenance of the studies.

RESULTS

We identified 299 communications related with new technologies from a total of 8139 (3.7%), including 120 posters and 179 oral communications, ranging from 1.6% of all communications in 2012 to 6.8% in 2018. The technologies most commonly addressed were advanced neuroimaging (24.7%), biosensors (17.1%), electrophysiology and neurostimulation (14.7%), and telemedicine (13.7%). The neurological fields where new technologies were most widely employed were movement disorders (18.4%), cerebrovascular diseases (15.7%), and dementia (13.4%). Madrid was the region presenting the highest number of communications related to new technologies (32.8%), followed by Catalonia (26.8%) and Andalusia (9.0%).

CONCLUSIONS

The number of communications addressing new technologies follows an upward trend. The number of technologies used in neurology has increased in parallel with their availability. We found scientific communications in all neurological subspecialties, with a heterogeneous geographical distribution.

Three-dimensional printing in paediatric orthopaedic surgery

Three-dimensional (3D) printing is a rapidly evolving and promising field to improve outcomes of orthopaedic surgery. The use of patient-specific 3D-printed models is specifically interesting in paediatric orthopaedic surgery, as limb deformity corrections often require an individual 3D treatment. In this editorial, various operative applications of 3D printing in paediatric orthopaedic surgery are discussed. The technical aspects and the imaging acquisition with computed tomography and magnetic resonance imaging are outlined. Next, there is a focus on the intraoperative applications of 3D printing during paediatric orthopaedic surgical procedures. An overview of various upper and lower limb deformities in paediatrics is given, in which 3D printing is already implemented, including post-traumatic forearm corrections and proximal femoral osteotomies. The use of patient-specific instrumentation (PSI) or guiding templates during the surgical procedure shows to be promising in reducing operation time, intraoperative haemorrhage and radiation exposure. Moreover, 3D-printed models for the use of PSI or patient-specific navigation templates are promising in improving the accuracy of complex limb deformity surgery in children. Lastly, the future of 3D printing in paediatric orthopaedics extends beyond the intraoperative applications; various other medical applications include 3D casting and prosthetic limb replacement. In conclusion, 3D printing opportunities are numerous, and the fast developments are exciting, but more evidence is required to prove its superiority over conventional paediatric orthopaedic surgery.

3D surgical planning of pediatric tumors: a review

BACKGROUND

3D surgical planning for the treatment of tumors in pediatrics using different neuroimaging methods is witnessing an accelerating and dynamic development. Until now, there have been many reports on the use of 3D printing techniques in different aspects of medical practice. Pediatric tumors mainly in the abdomen are among the most medical specialties that benefit from using this technique. The purpose of the current study is to review published literature regarding 3D surgical planning and its applications in the treatment of pediatric tumors and present challenges facing these techniques.

MATERIALS AND METHODS

A completed review of the available literature was performed, effect sizes from published studies were investigated, and results are presented concerning the use of 3D surgical planning in the management of pediatric tumors, most of which are abdominal.

RESULTS

According to the reviewed literature, our study comes to the point that 3D printing is a valuable technique for planning surgery for pediatric tumors in heart, brain, abdomen and bone. MRI and CT are the most common used techniques for preparing 3D printing models, as indicated by the reviewed reports. The reported studies have indicated that 3D printing allows the understanding of the anatomy of complex tumor cases, the simulation using surgical instruments, and medical and family education. The materials, 3D printing techniques and costs to be used depend on the application.

CONCLUSION

This technology can be applied in clinical practice with a wide spectrum, using various tools and a range of available 3D printing methods. Incorporating 3D printing into an effective application can be a gratifying process with the use of a multidisciplinary team and rapid advances, so more experience would be needed with this technique to show a clinical gain.

3D Modeling and Advanced Visualization of the Pediatric Brain, Neck, and Spine

The ready availability of advanced visualization tools on picture archiving and communication systems workstations or even standard laptops through server-based or cloud-based solutions has enabled greater adoption of these techniques. We describe how radiologists can tailor imaging techniques for optimal 3D reconstructions provide a brief overview of the standard and newer "on-screen" techniques. We describe the process of creating 3D printed models for surgical simulation and education, with examples from the authors' institution and the existing literature. Finally, the review highlights current uses and potential future use cases for virtual reality and augmented reality applications in a pediatric neuroimaging setting.

The effect of three-dimensional (3D) printing on quantitative and qualitative outcomes in paediatric orthopaedic osteotomies: a systematic review

Three-dimensional (3D) printing technology is increasingly being utilized in various surgical specialities. In paediatric orthopaedics it has been applied in the pre-operative and intra-operative stages, allowing complex deformities to be replicated and patient-specific instrumentation to be used. This systematic review analyses the literature on the effect of 3D printing on paediatric orthopaedic osteotomy outcomes.A systematic review of several databases was conducted according to PRISMA guidelines. Studies evaluating the use of 3D printing technology in orthopaedic osteotomy procedures in children (aged ≤ 16 years) were included. Spinal and bone tumour surgery were excluded. Data extracted included demographics, disease pathology, target bone, type of technology, imaging modality used, qualitative/quantitative outcomes and follow-up. Articles were further categorized as either 'pre-operative' or 'intra-operative' applications of the technology.Twenty-two articles fitting the inclusion criteria were included. The reported studies included 212 patients. There were five articles of level of evidence 3 and 17 level 4.A large variety of outcomes were reported with the most commonly used being operating time, fluoroscopic exposure and intra-operative blood loss.A significant difference in operative time, fluoroscopic exposure, blood loss and angular correction was found in the 'intra-operative' application group. No significant difference was found in the 'pre-operative' category.Despite a relatively low evidence base pool of studies, our aggregate data demonstrate a benefit of 3D printing technology in various deformity correction applications, especially when used in the 'intra-operative' setting. Further research including paediatric-specific core outcomes is required to determine the potential benefit of this novel addition. Cite this article: EFORT Open Rev 2021;6:130-138. DOI: 10.1302/2058-5241.6.200092.

Impact of new technologies on neurology in Spain. Review by the New Technologies Ad-Hoc Committee of the Spanish Society of Neurology

INTRODUCTION

New technologies (NT) are increasingly widespread in biomedicine. Using the consensus definition of NT established by the New Technologies Ad-Hoc Committee of the Spanish Society of Neurology (SEN), we evaluated the impact of these technologies on Spanish neurology, based on communications presented at Annual Meetings of the SEN.

MATERIAL AND METHODS

We defined the concept of NT in neurology as a novel technology or novel application of an existing technology, characterised by a certain degree of coherence persisting over time, with the potential to have an impact on the present and/or future of neurology. We conducted a descriptive study of scientific communications presented at the SEN's annual meetings from 2012 to 2018, analysing the type of NT, the field of neurology, and the geographical provenance of the studies.

RESULTS

We identified 299 communications related with NT from a total of 8,139 (3.7%), including 120 posters and 179 oral communications, ranging from 1.6% of all communications in 2012 to 6.8% in 2018. The technologies most commonly addressed were advanced neuroimaging (24.7%), biosensors (17.1%), electrophysiology and neurostimulation (14.7%), and telemedicine (13.7%). The neurological fields where NT were most widely employed were movement disorders (18.4%), cerebrovascular diseases (15.7%), and dementia (13.4%). Madrid was the region presenting the highest number of communications related to NT (32.8%), followed by Catalonia (26.8%) and Andalusia (9.0%).

CONCLUSIONS

The number of communications addressing NT follows an upward trend. The number of NT used in neurology has increased in parallel with their availability. We found scientific communications in all neurological subspecialties, with a heterogeneous geographical distribution.

3D Printing and NIR Fluorescence Imaging Techniques for the Fabrication of Implants

Three-dimensional (3D) printing technology holds great potential to fabricate complex constructs in the field of regenerative medicine. Researchers in the surgical fields have used 3D printing techniques and their associated biomaterials for education, training, consultation, organ transplantation, plastic surgery, surgical planning, dentures, and more. In addition, the universal utilization of 3D printing techniques enables researchers to exploit different types of hardware and software in, for example, the surgical fields. To realize the 3D-printed structures to implant them in the body and tissue regeneration, it is important to understand 3D printing technology and its enabling technologies. This paper concisely reviews 3D printing techniques in terms of hardware, software, and materials with a focus on surgery. In addition, it reviews bioprinting technology and a non-invasive monitoring method using near-infrared (NIR) fluorescence, with special attention to the 3D-bioprinted tissue constructs. NIR fluorescence imaging applied to 3D printing technology can play a significant role in monitoring the therapeutic efficacy of 3D structures for clinical implants. Consequently, these techniques can provide individually customized products and improve the treatment outcome of surgeries.

Setting Up 3D Printing Services for Orthopaedic Applications: A Step-by-Step Guide and an Overview of 3DBioSphere

INTRODUCTION

3D printing has widespread applications in orthopaedics including creating biomodels, patient-specific instruments, implants, and developing bioprints. 3DGraphy or printing 3D models enable the surgeon to understand, plan, and simulate different procedures on it. Despite widespread applications in non-healthcare specialties, it has failed to gain traction in healthcare settings. This is perhaps due to perceived capital expenditure cost and the lack of knowledge and skill required to execute the process.

PURPOSE

This article is written with an aim to provide step-by-step instructions for setting up a cost-efficient 3D printing laboratory in an institution or standalone radiology centre. The article with the help of video modules will explain the key process of segmentation, especially the technique of edge detection and thresholding which are the heart of 3D printing.

CONCLUSION

This is likely to enable the practising orthopaedician and radiologist to set up a 3D printing unit in their departments or even standalone radiology centres at minimal startup costs. This will enable maximal utilisation of this technology that is likely to bring about a paradigm shift in planning, simulation, and execution of complex surgeries.