Document authentication at molecular levels using desorption atmospheric pressure chemical ionization mass spectrometry imaging

Applications of MALDI mass spectrometry in forensic science

Forensic chemistry literature has grown exponentially, with many analytical techniques being used to provide valuable information to help solve criminal cases. Among them, matrix-assisted laser desorption/ionization mass spectrometry (MALDI MS), particularly MALDI MS imaging (MALDI MSI), has shown much potential in forensic applications. Due to its high specificity, MALDI MSI can analyze a wide variety of compounds in complex samples without extensive sample preparation, providing chemical profiles and spatial distributions of given analyte(s). This review introduces MALDI MS(I) to forensic scientists with a focus on its basic principles and the applications of MALDI MS(I) to the analysis of fingerprints, drugs of abuse, and their metabolites in hair, medicine samples, animal tissues, and inks in documents.

Development of mass spectrometry imaging techniques and its latest applications

Mass spectrometry imaging (MSI) is a novel molecular imaging technology that collects molecular information from the surface of samples in situ. The spatial distribution and relative content of various compounds can be visualized simultaneously with high spatial resolution. The prominent advantages of MSI promote the active development of ionization technology and its broader applications in diverse fields. This article first gives a brief introduction to the vital parts of the processes during MSI. On this basis, provides a comprehensive overview of the most relevant MS-based imaging techniques from their mechanisms, pros and cons, and applications. In addition, a critical issue in MSI, matrix effects is also discussed. Then, the representative applications of MSI in biological, forensic, and environmental fields in the past 5 years have been summarized, with a focus on various types of analytes (e.g., proteins, lipids, polymers, etc.) Finally, the challenges and further perspectives of MSI are proposed and concluded.

Writing sequence identification of seals and signatures in documents using ambient mass spectrometry imaging with chemometric methods

Identifying the writing sequence of seals and signatures in documents is often performed and difficult to resolve in forensic determination. Morphological and physical-chemical analysis methods are often limited by the destructive nature of samples, a high signal response strength and specific materials. Mass spectrometry imaging (MSI) has been used as an alternative method because it can generate molecular images from many surfaces and produce rich chemical information. Herein, we developed a sequence identification method by coupling an air flow-assisted desorption electrospray ionization (AFADESI)-MSI system with a chemometric analysis, which can holistically and directly analyse document samples under ambient, moderate and selectable conditions and maintain the original appearance of the paper documents after sampling. By integrating principal component analysis (PCA) and the partial least squares discriminant analysis (PLS-DA), equivocal point analysis can be objectively performed, where knowing the components of the seal or signature is not necessary to identify the sequence. In total, 28 prepared samples with known sequences and two original blind test samples were analysed. One prepared sample was analysed in negative ionization mode, and other samples were inferred in positive ionization mode. All writing sequences were in accordance with the actual case. The writing sequence of the blind testing of the original samples was correctly identified. This study provided a convenient, objective and quasi-nondestructive method to investigate the sequence differences among equivocal document samples and is promising for providing an alternative method for the sequence identification of seals and signatures in questionable documents.

Forensic analysis of hand-written documents using laser-induced breakdown spectroscopy (LIBS) and chemometrics

With the use of Laser Induced Breakdown Spectroscopy (LIBS), fast and semi non-destructive elemental analysis of ball-point pen writings has been performed directly from paper surfaces, aiming to obtain maximum differentiation between pens with a minimum number of pulses. The instrumental variables, the delay time, laser pulse energy and number of pulses per point, were evaluated through factorial design and optimum values were obtained through a quadratic regression model. Several atomic emission lines were tested as fingerprints in order to improve the differentiation between the tested inks and the range of 212-228 and 324-328 nm, which corresponds to Cu emission, demonstrated to be the best alternative as a discriminatory factor for two pens of the same color. However, the background contribution of cheque paper limited the multielement profile of the technique. Seventeen different pens were analyzed. Principal Component Analysis (PCA) treatment was used to classify the samples in clusters and to assemble hyperspectral images in order to obtain visual differentiation of the inks in a scores map. The results obtained by LIBS analysis were verified by microwave-assisted digestion of inks and analysis by ICP OES. Lastly, a real situation test was conducted where a forged document was analyzed by the proposed methodology as an alternative to distinguish between two inks of the same color, originating from different pens. For this proof of concept study, seventeen samples were evaluated, but further studies related to heterogeneity between pulses and samples should be carried out.

Depth-Dependent Chemical Analysis of Handwriting by Nanospray Desorption Electrospray Ionization Mass Spectrometry

Nanospray desorption electrospray ionization (nano-DESI) has been utilized in direct sampling mass spectrometry (MS) that requires highly spatially resolved sampling with minimal sample destruction. In this study, we explored the applicability of nano-DESI MS for the forensic chemical analysis of ink directly from handwriting on paper. Nano-DESI readily ionizes dyes, including the polyanionic ones, with minimal fragmentation and produces chemical fingerprints of ballpoint pens directly from a paper surface. Further, we specifically focused on how the potential of nano-DESI that changes the mass spectral profiles over time could reflect the differential distribution of analytes in a vertical direction because mildly extracted analytes are immediately transferred and analyzed in real time. To test this, we wrote the character "X" with various combinations of two different pens and analyzed the crosspoints by nano-DESI MS. As a result, the time-course changes in the chemical fingerprints of the ink, which were consistent with the order of the pen strokes, were successfully obtained by nano-DESI MS in most cases. After confirming the capability of the depth-dependent analysis of nano-DESI MS, we analyzed a simulated forgery in which the original and forged writings were made before and after affixing a seal and clearly distinguished the two portions based on the time-dependent changes in the profile of the ink compound.

Ambient mass spectrometry for the molecular diagnosis of lung cancer

Lung cancer is one of the most common malignancies and the leading cause of cancer-related death worldwide. Among the technologies suitable for the rapid and accurate molecular diagnosis of lung cancer, ambient mass spectrometry (AMS) has gained increasing interest as it allows the direct profiling of molecular information from various biological samples (e.g., tissue, serum, urine and sputum) in real-time and with minimal or no sample pretreatment. This minireview summarizes the applications of AMS in lung cancer studies (including tissue molecular identification, the discovery of potential biomarkers, and surgical margin assessment), and discusses the challenges and perspectives of AMS in the clinical precision molecular diagnosis of lung cancer.

In situ analysis of oxytetracycline tablets based on matrix-assisted laser desorption/ionization mass spectrometry imaging

RATIONALE

A thorough understanding of the content and distribution of active ingredients in pharmaceuticals is essential for drug efficacy and safety. Technological advancements in mass spectrometry imaging present an opportunity for methodological innovation by providing qualification and quantification analysis, as well as spatial information, in the same assay, which has great potential for applications in the rapid analysis and quality control of drugs.

METHODS

Matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) was employed to directly analyze oxytetracycline tablets in order to map the distribution of the active constituent within the whole tablet. Quantitative analysis was capable of differentiating tablets containing various doses of the active pharmaceutical ingredient.

RESULTS

To establish the methodology, detailed factors that influence matrix spraying and spatial resolution during sample preparation and the data acquisition process were optimized systematically. Quantitative analysis could differentiate the tablets containing various doses of the active compound. The proposed method was successfully applied to analyze real commercial tablets.

CONCLUSIONS

The developed method could successfully achieve the spatial location of oxytetracycline in actual tablet samples. These results could contribute to pharmaceutical tracing technology, especially the formulation process of tablets, which is helpful for monitoring the quality of pharmaceutical products and guaranteeing drug security.

Floral volatiles identification and molecular differentiation of Osmanthus fragrans by neutral desorption extractive atmospheric pressure chemical ionization mass spectrometry

RATIONALE

Floral volatiles are commonly present only at trace amounts and can be degraded or lost during vapor collection, which is often challenging from the analytical standpoint. Osmanthus fragrans Lour. is a widely cultivated plant known for the highly distinct fragrance of its flowers. The identification of specific volatile organic compounds (VOCs) and molecular differentiation of O. fragrans without any chemical pretreatment and VOC collection are important.

METHODS

Twenty-eight VOCs released by the flowers from ten different cultivars of O. fragrans were identified using neutral desorption extractive atmospheric pressure chemical ionization mass spectrometry (ND-EAPCI-MS) without any chemical pretreatment or VOC collection. Chemical identification was performed by high-resolution MSⁿ analysis and whenever possible was confirmed by the analysis of standards.

RESULTS

According to our literature search, nine of the identified VOCs, 3-buten-2-one, cyclohexadiene, 2-methylfuran, 3-allylcyclohexene, cuminyl alcohol, hotrienol oxide, epoxy-linalool oxide, N-(2-hydroxyethyl) octanamide, and 3-hydroxy-dihydro-β-ionone, have not been reported in O. fragrans in earlier studies. Confident differentiation between ten different cultivars of O. fragrans was achieved by the principal component analysis of the mass spectrometric results.

CONCLUSIONS

The results of our ND-EAPCI-MS analysis substantially increase our knowledge about the chemistry of the O. fragrans floral fragrance and demonstrate the power of this technique for direct molecular profiling for plant recognition or in biotechnological applications.

Review and perspectives on the applications of mass spectrometry imaging under ambient conditions

Ambient mass spectrometry (AMS)-based techniques are performed under ambient conditions in which the ionization and desorption occur in the open environment allowing the direct analysis of molecules with minimal or no sample preparation. A selected group of AMS techniques demonstrate imaging capabilities that can provide information about the localization of molecules on complex sample surfaces such as biological tissues. 2D, 3D, and multimodal imaging have unlocked an array of applications to systematically address complex problems in many areas of research such as drug monitoring, natural products, forensics, and cancer diagnostics. In the present review, we summarize recent advances in the field with respect to the implementation of new ambient ionization techniques and current applications in the last 5 years. In more detail, we mainly focus on imaging applications in topics related to animal whole bodies and tissues, single cells, cancer diagnostics and biomarkers, microbial cultures and co-cultures, plant and natural product metabolomics, and forensic applications. Finally, we discuss new areas of research, future perspectives, and the overall direction that the field may take in the years to come.

Paper Spray Mass Spectrometry for the Forensic Analysis of Black Ballpoint Pen Inks

This article describes the use of paper spray mass spectrometry (PS-MS) for the direct analysis of black ink writings made with ballpoint pens. The novel approach was developed in a forensic context by first performing the classification of commercially available ballpoint pens according to their brands. Six of the most commonly worldwide utilized brands (Bic, Paper Mate, Faber Castell, Pentel, Compactor, and Pilot) were differentiated according to their characteristic chemical patterns obtained by PS-MS. MS on the negative ion mode at a mass range of m/z 100-1000 allowed prompt discrimination just by visual inspection. On the other hand, the concept of relative ion intensity (RII) and the analysis at other mass ranges were necessary for the differentiation using the positive ion mode. PS-MS combined with partial least squares (PLS) was utilized to monitor changes on the ink chemical composition after light exposure (artificial aging studies). The PLS model was optimized by variable selection, which allowed the identification of the most influencing ions on the degradation process. The feasibility of the method on forensic investigations was also demonstrated in three different applications: (1) analysis of overlapped fresh ink lines, (2) analysis of old inks from archived documents, and (3) detection of alterations (simulated forgeries) performed on archived documents. Graphical Abstract ᅟ.

Analysis of PEG oligomers in black gel inks: Discrimination and ink dating

Carbon-based black gel inks are common samples in forensic practice of questioned document examination in China, but there are few analytical methods for this type of ink. In this study, a liquid chromatography-.high resolution mass spectrometry (LC-HRMS) method was established for the analysis of PEG oligomers in carbon-based black gel ink entries. The coupled instruments achieve both the identification and quantification of PEG oligomers in ink entries with reproducible results. Twenty carbon-based black gel inks, whose Raman spectra appeared identical, were analyzed using the LC-HRMS method. As a result, the twenty gel inks were classified into four groups according to the distribution of PEG oligomers. Artificially aging of PEG 400 and a gel ink showed that as PEG degraded, the relative amounts of low molecular weight PEG oligomers increased, while those of high molecular weight decreased. The degradation of PEG oligomers in a naturally aged gel ink was consistent with those in the artificially aged samples, but occurred more slowly. This study not only provided a new method for discriminating carbon-based black gel ink entries, but also offered a new approach for studying the relative ink dating of carbon-based black gel ink entries.

Differential diagnosis of human lung tumors using surface desorption atmospheric pressure chemical ionization imaging mass spectrometry

Differential diagnosis of human lung cancer in untreated tissue is achieved by DAPCI-MSI combined with multivariate statistical analysis.

A microwave plasma torch quadrupole mass spectrometer for monitoring trace levels of lead and cadmium in water

RATIONALE

The microwave plasma torch (MPT) is a low power-consumption and easily operated plasma generator. As an ambient ion source, the MPT can be coupled with various mass spectrometers and applied in real-time analysis of metal elements in water for the demands of environmental control and water quality inspection.

METHODS

We constructed a quadrupole mass spectrometer with an MPT as the ion source to detect directly trace levels of lead and cadmium in water. Without any pretreatments,water samples were first pneumatically nebulized with a desolvation unit, then flowed through the central tube of the MPT and finally entered the plasma. After that, the metal ions produced were introduced into the mass spectrometer to be analyzed via an atmospheric inlet of a stainless steel capillary tube.

RESULTS

The MPT mass spectra of lead and cadmium ions were characterized with clear unit isotopic resolution. The sensitivity reached levels of 20 ng/L for lead and 72.7 ng/L for cadmium in water, respectively. The linear response range covered at least 2 orders of magnitude. Moreover, a single aqueous sample could be completely analyzed within 3 minutes, providing reasonably relative standard deviation values.

CONCLUSIONS

Our results demonstrated that this MPT mass spectrometer is a useful tool for the monitoring of lead and cadmium ions in water, which makes it a potential alternative to ICP-MS, to be used in the fields of environmental control and water quality and foodstuff safety inspection. Copyright © 2016 John Wiley & Sons, Ltd.

Microwave plasma torch mass spectrometry for the direct detection of copper and molybdenum ions in aqueous liquids

Microwave plasma torch (MPT) is a simple and low power-consumption ambient ion source. And the MPT Mass spectra of many metal elements usually exhibit some novel features different from their inductively coupled plasma (ICP) mass spectra, which may be helpful for metal element analysis. Here, we presented the results about the MPT mass spectra of copper and molybdenum elements by a linear ion trap mass spectrometer (LTQ). The generated copper or molybdenum contained ions in plasma were characterized further in collision-induced dissociated (CID) experiments. These researches built a novel, direct and sensitive method for the direct analysis of trace levels of copper and molybdenum in aqueous liquids. Quantitative results showed that the limit of detection (LOD) by using MS(2) procedure was estimated to be 0.265 µg/l (ppb) for copper and 0.497 µg/l for molybdenum. The linear dynamics ranges cover at least 2 orders of magnitude and the analysis of a single aqueous sample can be completed in 5-6 min with a reasonable semi-quantitative sense. Two practical aqueous samples, milk and urine, were also analyzed qualitatively with reasonable recovery rates and RSD. These experimental data demonstrated that the MPT MS is able to turn into a promising and hopeful tool in field analysis of copper and molybdenum ions in water and some aqueous media, and can be applied in many fields, such as environmental controlling, hydrogeology, and water quality inspection. Moreover, MPT MS could also be used as the supplement of ICP-MS for the rapid and in-situ analysis of metal ions. Copyright © 2016 John Wiley & Sons, Ltd.

Molecular Ionization-Desorption Analysis Source (MIDAS) for Mass Spectrometry: Thin-Layer Chromatography

Molecular ionization-desorption analysis source (MIDAS), which is a desorption atmospheric pressure chemical ionization (DAPCI) type source, for mass spectrometry has been developed as a multi-functional platform for the direct sampling of surfaces. In this article, its utility for the analysis of thin-layer chromatography (TLC) plates is highlighted. Amino acids, which are difficult to visualize without staining reagents or charring, were detected and identified directly from a TLC plate. To demonstrate the full potential of MIDAS, all active ingredients from an analgesic tablet, separated on a TLC plate, were successfully detected using both positive and negative ion modes. The identity of each of the compounds was confirmed from their mass spectra and compared against standards. Post separation, the chemical signal (blue permanent marker) as reference marks placed at the origin and solvent front were used to calculate retention factor (Rf) values from the resulting ion chromatogram. The quantitative capabilities of the device were exhibited by scanning caffeine spots on a TLC plate of increasing sample amount. A linear curve based on peak are, R2 = 0.994, was generated for seven spots ranging from 50 to 1000 ng of caffeine per spot.

Accurate quantification of creatinine in serum by coupling a measurement standard to extractive electrospray ionization mass spectrometry

Ambient ionization (AI) techniques have been widely used in chemistry, medicine, material science, environmental science, forensic science. AI takes advantage of direct desorption/ionization of chemicals in raw samples under ambient environmental conditions with minimal or no sample preparation. However, its quantitative accuracy is restricted by matrix effects during the ionization process. To improve the quantitative accuracy of AI, a matrix reference material, which is a particular form of measurement standard, was coupled to an AI technique in this study. Consequently the analyte concentration in a complex matrix can be easily quantified with high accuracy. As a demonstration, this novel method was applied for the accurate quantification of creatinine in serum by using extractive electrospray ionization (EESI) mass spectrometry. Over the concentration range investigated (0.166 ~ 1.617 μg/mL), a calibration curve was obtained with a satisfactory linearity (R² = 0.994), and acceptable relative standard deviations (RSD) of 4.6 ~ 8.0% (n = 6). Finally, the creatinine concentration value of a serum sample was determined to be 36.18 ± 1.08 μg/mL, which is in excellent agreement with the certified value of 35.16 ± 0.39 μg/mL.

Forensic analysis of ballpoint pen inks using paper spray mass spectrometry

Paper spray mass spectrometry (PS-MS) is explored as a simple, fast, and effective technique for the forensic analysis of inks in documents.