Recent Trends in Microbial Approaches for Soil Desalination

Soil salinization has become a major problem for agriculture worldwide, especially because this phenomenon is continuously expanding in different regions of the world. Salinity is a complex mechanism, and in the soil ecosystem, it affects both microorganisms and plants, some of which have developed efficient strategies to alleviate salt stress conditions. Currently, various methods can be used to reduce the negative effects of this problem. However, the use of biological methods, such as plant-growth-promoting bacteria (PGPB), phytoremediation, and amendment, seems to be very advantageous and promising as a remedy for sustainable and ecological agriculture. Other approaches aim to combine different techniques, as well as the utilization of genetic engineering methods. These techniques alone or combined can effectively contribute to the development of sustainable and eco-friendly agriculture.

New and potent production platform of the acetylcholinesterase inhibitor huperzine A by gamma-irradiated Alternaria brassicae under solid-state fermentation

Huperzine-A (HupA) is an emerging, powerful, and promising natural acetylcholinesterase inhibitor. Despite that, the achieved yields of HupA from microbial sources are still far from the industrial applications. Accordingly, this paper was conducted to valorize solid-state fermentation (SSF) as an efficient production platform of HupA. Four agro-industrial wastes, namely rice bran, potato peel, sugarcane bagasse, and wheat bran, were tested and screened as cultural substrates for the production of HupA by the endophytic Alternaria brassica under SSF. Maximum HupA production was attained on using rice bran moistened by Czapex's dox mineral broth. In the effort to increase the HupA titer, supplementation of the best moistening agent by different carbon and nitrogen sources was successfully investigated. Additionally, factors affecting HupA production under SSF including substrate concentration, moistening level, and inoculum concentration were optimized using response surface methodology. A Box-Behnken design was applied for generating a predictive model of the interactions between these factors. Under the optimum conditions of 15 g rice bran, inoculum concentration of 5 × 10⁶ spores mL^-1, and 60% moisture level, HupA concentration was intensified to 518.93 μg g^-1. Besides, HupA production by the fungal strain was further enhanced using gamma-irradiation mutagenesis. The final HupA production was significantly intensified following exposure to 0.5 KGy gamma radiation to 1327 μg g^-1, which represents a 12.85-fold increase. This is the first report on the successful production of the natural fungal metabolite HupA under SSF. Moreover, the achieved yield in this study using agro-industrial wastes may contribute to reducing the cost of HupA manufacture.Key points• Different agro-industrial by-products were tried as cultural substrates for the production of the acetylcholinesterase inhibitor HupA under SSF for the first time.• Factors affecting HupA production under SSF were optimized using response surface methodology.• The final HupA production was intensified following exposure to gamma radiation recording 1327 μg g^-1, which represents a 12.85-fold increase.

Biosensor-based growth-coupling and spatial separation as an evolution strategy to improve small molecule production of Corynebacterium glutamicum

Evolutionary engineering is a powerful method to improve the performance of microbial cell factories, but can typically not be applied to enhance the production of chemicals due to the lack of an appropriate selection regime. We report here on a new strategy based on transcription factor-based biosensors, which directly couple production to growth. The growth of Corynebacterium glutamicum was coupled to the intracellular concentration of branched-chain amino acids, by integrating a synthetic circuit based on the Lrp biosensor upstream of two growth-regulating genes, pfkA and hisD. Modelling and experimental data highlight spatial separation as key strategy to limit the selection of 'cheater' strains that escaped the evolutionary pressure. This approach facilitated the isolation of strains featuring specific causal mutations enhancing amino acid production. We envision that this strategy can be applied with the plethora of known biosensors in various microbes, unlocking evolution as a feasible strategy to improve production of chemicals.

Synthetic biology-inspired strategies and tools for engineering of microbial natural product biosynthetic pathways

Microbial-derived natural products (NPs) and their derivative products are of great importance and used widely in many fields, especially in pharmaceutical industries. However, there is an immediate need to establish innovative approaches, strategies, and techniques to discover new NPs with novel or enhanced biological properties, due to the less productivity and higher cost on traditional drug discovery pipelines from natural bioresources. Revealing of untapped microbial cryptic biosynthetic gene clusters (BGCs) using DNA sequencing technology and bioinformatics tools makes genome mining possible for NP discovery from microorganisms. Meanwhile, new approaches and strategies in the area of synthetic biology offer great potentials for generation of new NPs by engineering or creating synthetic systems with improved and desired functions. Development of approaches, strategies and tools in synthetic biology can facilitate not only exploration and enhancement in supply, and also in the structural diversification of NPs. Here, we discussed recent advances in synthetic biology-inspired strategies, including bioinformatics and genetic engineering tools and approaches for identification, cloning, editing/refactoring of candidate biosynthetic pathways, construction of heterologous expression hosts, fitness optimization between target pathways and hosts and detection of NP production.

Mutagenesis and Adaptation of the Psychrotrophic Fungus Chrysosporium pannorum A-1 as a Method for Improving β-pinene Bioconversion

Mutagenesis and adaptation of the psychrotrophic fungus Chrysosporium pannorum A-1 to the toxic substrate β-pinene were used to obtain a biocatalyst with increased resistance to this terpene and improved bioconversion properties. Mutants of the parental strain were induced with UV light and N-methyl-N'-nitro-N-nitrosoguanidine. Mutants resistant to β-pinene were isolated using agar plates with a linear gradient of substrate concentrations. Active mutants were selected based on their general metabolic activity (GMA) expressed as oxygen consumption rate. Compared to the parental strain, the most active mutant showed an enhanced biotransformation ability to convert β-pinene to trans-pinocarveol (315 mg per g of dry mycelium), a 4.3-fold greater biocatalytic activity, and a higher resistance to H2O2-induced oxidative stress. Biotransformation using adapted mutants yielded twice as much trans-pinocarveol as the reaction catalyzed by non-adapted mutants. The results indicate that mutagenesis and adaptation of C. pannorum A-1 is an effective method of enhancing β-bioconversion of terpenes.

Improved tolerance of Escherichia coli to oxidative stress by expressing putative response regulator homologs from Antarctic bacteria

Response regulator (RR) is known a protein that mediates cell's response to environmental changes. The effect of RR from extremophiles was still under investigation. In this study, response regulator homologs were mined from NGS data of Antarctic bacteria and overexpressed in Escherichia coli. Sixteen amino acid sequences were annotated corresponding to response regulators related to the two-component regulatory systems; of these, 3 amino acid sequences (DRH632, DRH1601 and DRH577) with high homology were selected. These genes were cloned in pRadGro and expressed in E. coli. The transformant strains were subjected to various abiotic stresses including oxidative, osmotic, thermal stress, and acidic stress. There was found that the robustness of E. coli to abiotic stress was increased in the presence of these response regulator homologs. Especially, recombinant E. coli overexpressing drh632 had the highest survival rate in oxidative, hypothermic, osmotic, and acidic conditions. Recombinant E. coli overexpressing drh1601 showed the highest tolerance level to osmotic stress. These results will be applicable for development of recombinant strains with high tolerance to abiotic stress.

Mechanisms of response to pH shock in microbial fermentation

The following review highlights pH shock, a novel environmental factor, as a tool for the improvement of fermentation production. The aim of this review is to introduce some recent original studies on the enhancement of microbial fermentation production by pH shock. Another purpose of this review is to improve the understanding of the processes that underlie physiological and genetic differences, which will facilitate future research on the improvement of fermentation production and reveal the associated molecular mechanisms. This understanding will simultaneously promote the application of this strategy to other microbial fermentation systems. Furthermore, improvement of the cellular tolerance of genetically engineered bacteria can also be a new field of research in the future to enhance fermentation production.

Wiring cell growth to product formation

Microbial cell factories offer new and sustainable production routes for high-value chemicals. However, identification of high producers within a library of clones remains a challenge. When product formation is coupled to growth, millions of metabolic variants can be effectively interrogated by growth selection, dramatically increasing the throughput of strain evaluation. While growth-coupled selections for cell factories have a long history of success based on metabolite auxotrophies and toxic antimetabolites, such methods are generally restricted to molecules native to their host metabolism. New synthetic biology tools offer the opportunity to rewire cellular metabolism to depend on specific and non-native products for growth.

Mutants of Yarrowia lipolytica NCIM 3589 grown on waste cooking oil as a biofactory for biodiesel production

Background

Oleaginous yeasts are fast emerging as a possible feedstock for biodiesel production. Yarrowia lipolytica, a model oleaginous yeast is known to utilize a variety of hydrophobic substrates for lipid accumulation including waste cooking oil (WCO). Approaches to increase lipid content in this yeast include metabolic engineering which requires manipulation of multiple genes in the lipid biosynthesis pathway. A classical and cost-effective approach, namely, random chemical mutagenesis on the yeast can lead to increased production of biodiesel as is explored here.

Results

In this study, chemical mutagenesis using the alkylating agent, N- methyl-N′-nitro-N-nitrosoguanidine (MNNG) as well as an additional treatment with cerulenin, a fatty acid synthase inhibitor generated 800 mutants of Y. lipolytica NCIM 3589 (761 MNNG treated and 39 MNNG + cerulenin treated). A three-stage screening using Sudan Black B plate technique, Nile red fluorimetry and total lipid extraction using solvent was performed, which enabled selection of ten high lipid yielding mutants. Time course studies of all the ten mutants were further undertaken in terms of biomass, lipid yield and lipid content to select three stable mutants (YlB6, YlC7 and YlE1) capable of growing and accumulating lipid on WCO, with lipid contents of 55, 60 and 67% as compared to 45% for the wild type. The mutants demonstrated increased volumetric lipid productivities (0.062, 0.044 and 0.041 g L⁻¹ h⁻¹) as compared to the wild type (0.033 g L⁻¹ h⁻¹). The fatty acid profile of the three mutants consisted of a high content of C16 and C18 saturated and monounsaturated fatty acids and was found to be suitable for biodiesel production. The fuel properties, namely, density, kinematic viscosity, total acid number, iodine value of the three mutants were evaluated and found to lie within the limits specified by internationally accepted standards. Additionally, it was noted that the mutants demonstrated better cetane numbers and higher heating values than the wild type strain.

Conclusion

The chemical mutagenesis strategy adopted in this study resulted in the successful isolation of three stable high SCO yielding mutants. The mutants, namely, YlB6, YlC7 and YlE1 exhibited a 1.22, 1.33 and 1.49-fold increase in lipid contents when grown on 100 g L⁻¹ waste cooking oil than the parental yeast strain. The fatty acid methyl ester (FAME) profiles of all the three mutants was determined to be suitable for biodiesel suggesting their potential applicability while simultaneously addressing the management of waste cooking oil.

Electronic supplementary material

The online version of this article (doi:10.1186/s12934-017-0790-x) contains supplementary material, which is available to authorized users.