Estimation of the mechanical property of meniscus using ultrasound: examinations of native meniscus and effects of enzymatic digestion

Experiments and hyperelastic modeling of porcine meniscus show heterogeneity at high strains

Constitutive modeling of the meniscus is critical in areas like knee surgery and tissue engineering. At low strain rates, the meniscus can be described using a hyperelastic model. Calibration of hyperelastic material models of the meniscus is challenging on many fronts due to material variability and friction. In this study, we present a framework to determine the hyperelastic material parameters of porcine meniscus (and similar soft tissues) using no-slip uniaxial compression experiments. Because of the nonhomogeneous deformation in the specimens, a finite element solution is required at each step of the iterative calibration process. We employ a Bayesian calibration approach to account for the inherent material variability and a Bayesian optimization approach to minimize the resulting cost function in the material parameter space. Cylindrical specimens of porcine meniscus from the anterior, middle and posterior regions are tested up to 30% compressive strain and the Yeoh form of hyperelastic strain energy density function is used to describe the material response. The results show that the Yeoh form is able to accurately describe the compressive response of porcine meniscus and that the Bayesian calibration and optimization approaches are able to calibrate the model in a computationally efficient manner while taking into account the inherent material variability. The results also show that the shear modulus or the initial stiffness is roughly uniform across the different areas of the meniscus, but there is significant spatial heterogeneity in the response at high strains. In particular, the middle region is considerably stiffer at high strains. This heterogeneity is important to consider in modeling the response of the meniscus for clinical applications.

Constitutive modeling of menisci tissue: a critical review of analytical and numerical approaches

Menisci are fibrocartilaginous disks consisting of soft tissue with a complex biomechanical structure. They are critical determinants of the kinematics as well as the stability of the knee joint. Several studies have been carried out to formulate tissue mechanical behavior, leading to the development of a wide spectrum of constitutive laws. In addition to developing analytical tools, extensive numerical studies have been conducted on menisci modeling. This study reviews the developments of the most widely used continuum models of the meniscus mechanical properties in conjunction with emerging analytical and numerical models used to study the meniscus. The review presents relevant approaches and assumptions used to develop the models and includes discussions regarding strengths, weaknesses, and discrepancies involved in the presented models. The study presents a comprehensive coverage of relevant publications included in Compendex, EMBASE, MEDLINE, PubMed, ScienceDirect, Springer, and Scopus databases. This review aims at opening novel avenues for improving menisci modeling within the framework of constitutive modeling through highlighting the needs for further research directed toward determining key factors in gaining insight into the biomechanics of menisci which is crucial for the elaborate design of meniscal replacements.

Effects of lateral opening wedge and medial closing wedge distal femoral osteotomies on axial load stability

BACKGROUND

The stability of the current distal femoral osteotomy is insufficient for early weight bearing and bone healing. The purpose of this study was to test the stability of medial closing wedge- (MCW-) and lateral opening wedge-distal femoral osteotomies (LOW-DFO), which have improved with the recent advances in technology.

METHODS

We used composite bone models with MCW-DFO, improved with biplanar osteotomy technique and a Tomofix™ MDF plate, or LOW-DFO improved with biplanar osteotomy technique, a Tomofix™ LDF plate, and a β-TCP bone substitute, BONISH® graft. A cyclic axial loading test was employed to evaluate the strain on a plate and hinge point. The breaking axial load was measured.

RESULTS

Tensile strain on the plate produced by cyclic axial loading was significantly lower for LOW-DFO (2.0 ± 0.8 MPa) than for MCW-DFO (3.9 ± 1.6 MPa, P < .05). Compressive strain on the hinge point produced by cyclic axial loading was lower for LOW-DFO (6.6 ± 2.9 MPa) than for MCW-DFO (7.7 ± 4.6 MPa,). The maximum breaking axial load was significantly higher for LOW-DFO (5511 ± 945 N) than for MCW-DFO (4303 ± 518 N, P < .05).

CONCLUSIONS

LOW-DFO improved with recent advanced technology was superior to MCW-DFO improved with advanced technology in both cyclic axial loading test and breaking axial load test. This suggests that LOW-DFO facilitates earlier weight bearing and bone healing than does MCW-DFO.

A 3D printed PCL/hydrogel construct with zone-specific biochemical composition mimicking that of the meniscus

Engineering the meniscus is challenging due to its bizonal structure; the tissue is cartilaginous at the inner portion and fibrous at the outer portion. Here, we constructed an artificial meniscus mimicking the biochemical organization of the native tissue by 3D printing a meniscus shaped PCL scaffold and then impregnating it with agarose (Ag) and gelatin methacrylate (GelMA) hydrogels in the inner and outer regions, respectively. After incubating the constructs loaded with porcine fibrochondrocytes for 8 weeks, we demonstrated that presence of Ag enhanced glycosaminoglycan (GAG) production by about 4 fold (p < 0.001), while GelMA enhanced collagen production by about 50 fold (p < 0.001). In order to mimic the physiological loading environment, meniscus shaped PCL/hydrogel constructs were dynamically stimulated at strain levels gradually increasing from the outer region (2% of initial thickness) towards the inner region (10%). Incorporation of hydrogels protected the cells from the mechanical damage caused by dynamic stress. Dynamic stimulation resulted in increased ratio of collagen type II (COL 2) in the Ag-impregnated inner region (from 50% to 60% of total collagen), and increased ratio of collagen type I (COL 1) in the GelMA-impregnated outer region (from 60% to 70%). We were able to engineer a meniscus, which is cartilage-like at the inner portion and fibrocartilage-like at the outer portion. Our construct has a potential for use as a substitute for total meniscus replacement.

Proteoglycans contribute locally to swelling, but globally to compressive mechanics, in intact cervine medial meniscus

Loss of charged proteoglycans in the knee meniscus, which aid in the support of compressive loads by entraining water, is an effect of degeneration and is often associated with osteoarthritis. In healthy menisci, proteoglycan content is highest in the inner white zone and decreases towards the peripheral red zone. We hypothesized that loss of proteoglycans would reduce both osmotic swelling and compressive stiffness, spatially localized to the avascular white zone of the meniscus. This hypothesis was tested by targeted enzymatic digestion of proteoglycans using hyaluronidase in intact cervine medial menisci. Mechanics were quantified by creep indentation on the femoral surface. Osmotic swelling changes were assessed by measuring collagen fiber crimp period in the radial-axial plane in the lamellar layer along both the tibial and femoral contacting surfaces. All measurements were made in the inner, middle, and outer zones of the anterior, central, and posterior regions. Mechanical measurements showed variation in creep behavior with anatomical location, along with spatially uniform decreases in viscosity (average of 21%) and creep stiffness (average of 15%) with hyaluronidase treatment. Lamellar collagen crimp period was significantly decreased (average of 27%) by hyaluronidase, indicating a decrease in osmotic swelling, with the largest decreases seen in locations with the highest proteoglycan content. Taken together, these results suggest that while proteoglycans have localized effects on meniscus swelling, the resulting effect on compressive properties is distributed throughout the tissue.

In vitro stability of open wedge high tibial osteotomy with synthetic bone graft

It has been predicted that significant stress will be applied to the plate and lateral cortical hinge of an osteotomy site when early full weight bearing is commenced after an open wedge high tibial osteotomy. We hypothesized that the stress concentration on the plate or at the lateral cortical hinge would be reduced by inserting bone substitutes into the osteotomy gap. Two different types of tibia model were investigated: Group A, fixation with TomoFix with the osteotomy site left as an open space; and Group B, two beta-TCP wedges are inserted into osteotomy site and fixed with TomoFix. Stress at five points was measured using strain gauges. Specimens were mounted onto a testing machine with an FTA (femoro-tibial angle) of 170 degrees . Cyclic load tests and an ultimate load test were then performed. The mean stress on the plate was measured at 15.5+/-1.8Mpa in Group A. On the other hand, this value in Group B was only 9.52+/-2.1Mpa and this was a significant difference (P<0.01). The mean stress on the lateral hinge in Groups A and B was 3.31+/-0.5 and 2.49+/-0.2, respectively which was also a significant difference (P<0.05). The mean maximum breaking load in Group A was 2500+/-280N and in Group B 4270+/-420N which was a significant difference (P<0.01). Hence, for OWHTO procedures, the use of beta-TCP wedges and TomoFix is thus likely to improve the initial axial and possibly rotational stability at the osteotomy site in comparison with methods that leave the osteotomy gap open.

Quantitative assessment of articular cartilage with morphologic, acoustic and mechanical properties obtained using high-frequency ultrasound

Osteoarthritis (OA) is one of the most common joint diseases among adults, and its early detection is still not possible. In this study, high-frequency ultrasound and ultrasound-assisted mechanical testing systems were used to quantitatively measure the morphologic, acoustic and mechanical properties of normal and enzymatically degraded bovine articular cartilages in vitro. A total of 40 osteochondral cartilage plugs were prepared from 20 bovine patellae (n=20x2) and divided into two groups for collagenase and trypsin digestions, respectively. A high-frequency ultrasound system (center frequency: 40 MHz) was used to analyze the surface integrity (ultrasound roughness index, URI), thickness and acoustic properties of the articular cartilages before and after enzymatic degradations. Acoustic parameters included the integrated reflection coefficient (IRC) from the cartilage surface, reflection from the cartilage-bone interface (AIB(bone)), integrated attenuation (IA) and integrated backscatter (IBS) of the internal cartilage tissue. A newly developed ultrasound water jet indentation system was used to assess the mechanical properties of the cartilage samples. The results showed that the URI increased significantly (p<0.05) after collagenase digestion while no significant change (p>0.05) was found after trypsin digestion. With regard to acoustic parameters, the IRC decreased significantly (p<0.05) after collagenase digestion while no significant change (p>0.05) was found after trypsin digestion. The AIB(bone) demonstrated an insignificant change after collagenase digestion (p>0.05) but a significant decrease after trypsin digestion (p<0.05). Both enzymatic degradation groups showed insignificant differences (p>0.05) in the IA but a significant increase (p<0.05) in the IBS after both enzymatic degradations. The apparent stiffness measured by ultrasound water jet indentation suggested that articular cartilage from both groups became significantly softer (p<0.05) after the enzymatic degradations. A significant relationship was found to exist between the IRC and URI (p<0.05). This study showed that high-frequency ultrasound can be a comprehensive tool to quantitatively and systematically analyze the morphologic, acoustic and mechanical properties of articular cartilage in association with its degeneration.

Assessment of depth and degeneration dependences of articular cartilage refractive index using optical coherence tomography in vitro

In this study, optical coherence tomography (OCT) with an axial resolution of 15 mum was used to investigate the depth and degeneration dependences of the refractive index (RI) of articular cartilage collected from bovine patellae in vitro. Eighteen disks of articular cartilage with a diameter of 6.35 mm harvested from different patellae were successfully prepared. Each disk was cut into two halves and three horizontal cartilage slices (n = 18 x 2 x 3) with an approximately equal thickness of 0.5 mm were further prepared from each half disk. The cartilage slices were digested by two different enzymes, collagenase and trypsin, to disturb collagen fibrils and proteoglycans, respectively. The samples were submerged in the physiological saline and tested using OCT before and after the enzyme digestion and the RI for each specimen was calculated. The RI of articular cartilage from the superficial to deep regions was 1.361 +/- 0.032 (mean +/- SD), 1.338 +/- 0.036, and 1.371 +/- 0.041 for normal specimens; 1.357 +/- 0.036, 1.331 +/- 0.030, and 1.392 +/- 0.037 for trypsin digested specimens; and 1.361 +/- 0.032, 1.336 +/- 0.048, and 1.376 +/- 0.043 for those treated by collagenase, respectively. Two-factor repeated measure ANOVA revealed that for all the three groups of specimens, the RI in different depths was significantly different (p < 0.05). However, we found that the trypsin and collagenase treatments did not exert a significant effect on the RI (p > 0.05). The results suggested that the depth dependence of articular cartilage should be taken into account when OCT is used for related measurement.

Intraoperative acoustic evaluation of living human cartilage of the elbow and knee during mosaicplasty for osteochondritis dissecans of the elbow: an in vivo study

BACKGROUND

Autologous osteochondral mosaicplasty for osteochondritis dissecans of the capitellum is being used increasingly in adolescent patients. Little research has been published on the material properties of living human cartilage of the elbow and knee.

HYPOTHESIS

The cartilage of the osteochondritis dissecans lesion is detected as degenerated by ultrasound. The material properties of the cartilage of the intact part of the elbow are not different from those of the intact knee except in thickness.

STUDY DESIGN

Descriptive laboratory study.

METHODS

The authors studied 10 young male athletes with osteochondritis dissecans of the capitellum who underwent mosaicplasty. An acoustic probe was used for measurement, and the wavelet transform method was used. Three parameters were used: signal intensity (index of cartilage stiffness), signal duration (index of roughness), and signal interval (index of thickness).

RESULTS

The cartilage of the osteochondritis dissecans lesion had lower signal intensity than did the intact part of the capitellum. The cartilage of the radial head opposite the capitellum had significantly lower signal intensity and higher signal duration than did other sites. The signal intensity of the radial head was significantly higher in early-stage patients than in late-stage patients, although the macroscopic view was almost all intact. The signal intensity of the plug was decreased significantly after grafting.

CONCLUSION

The osteochondritis dissecans lesion had lower signal intensity than did the intact part of the capitellum. Although the macroscopic view looked intact, the radial head cartilage was degenerated as measured acoustically.

CLINICAL RELEVANCE

Not only the cartilage of the capitellum but the cartilage of the radial head are acoustically degenerated in osteochondritis dissecans patients. Plugs might be damaged in the transplanting procedure, and further follow-up is necessary.