Enhancement of posterolateral lumbar spine fusion using low-dose rhBMP-2 and cultured marrow stromal cells

Using a developed co-culture device to evaluate the proliferation of bone marrow stem cells by stimulation with platelet-rich plasma and electromagnetic field

BACKGROUNDS

Bone marrow stem cell can differentiate to osteoblast by growth factors, pulsed low-intensity ultrasound and electric magnetic field. In the research, bone marrow stem cells were cultured; bone marrow stem cells in culture can be stimulated by platelet-rich plasma and electric field.

METHODS

The culture well of the co-cultivation device has a radius of 7.5 mm and a depth of 7 mm. It is divided into two sub-chambers separated by a 3 mm high and 1 mm wide barrier. The bone marrow stem cells were seeded at a density of 2 × 104 cells and the medium volume was 120μl. Platelet-rich plasma (PRP) or platelet-poor plasma (PPP) was added to the other sub-chamber at a volume of 10μl. The bone marrow stem cells were subjected to different electric fields (0 ~ 1 V/cm) at a frequency of 70 kHz for 60 min.

RESULTS

The highest osteogenic capacity of bone marrow stem cells was achieved by addition of PRP to electric field stimulation (0.25 V/cm) resulted in a proliferation rate of 599.78%. In electric field stimulation (0.75 V/cm) with PPP, the proliferation rate was only 10.46%.

CONCLUSIONS

Bone marrow stem cell with PRP in the co-culture device combined with electric field at 0.25 V/cm strength significantly promoted the growth of bone marrow stem cells.

Bone marrow mesenchymal stem cells with low dose bone morphogenetic protein 2 enhances scaffold-based spinal fusion in a porcine model

High doses bone morphogenetic protein 2 (BMP-2) have resulted in a series of complications in spinal fusion. We previously established a polyelectrolyte complex (PEC) carrier system that reduces the therapeutic dose of BMP-2 in both rodent and porcine spinal fusion models. This study aimed to evaluate the safety and efficacy of the combination of bone marrow mesenchymal stem cells (BMSCs) and low dose BMP-2 delivered by PEC for bone regeneration in a porcine model of anterior lumbar interbody spinal fusion (ALIF) application. Six Yorkshire pigs underwent a tri-segmental (L2/L3; L3/L4; L4/L5) ALIF in four groups, namely: (a) BMSCs + 25 μg BMP-2/PEC (n = 9), (b) 25 μg BMP-2/PEC (n = 3), (c) BMSCs (n = 3), and (d) 50 μg BMP-2/absorbable collagen sponge (n = 3). Fusion outcomes were evaluated by radiography, biomechanical testing, and histological analysis after 12 weeks. Mean radiographic scores at 12 weeks were 2.7, 2.0, 1.0, and 1.0 for Groups 1 to 4, respectively. μ-CT scanning, biomechanical evaluation, and histological analysis demonstrated solid fusion and successful bone regeneration in Group 1. In contrast, Group 2 showed inferior quality and slow rate of fusion, and Groups 3 and 4 failed to fuse any of the interbody spaces. There was no obvious evidence of seroma formation, implant rejection, or any other complications in all groups. The results suggest that the combination of BMSCs and low dose BMP-2/PEC could further lower down the effective dose of the BMP-2 and be used as a bone graft substitute in the large animal ALIF model.

Growth Factors, Carrier Materials, and Bone Repair

This chapter provides an overview of the growth factors active in bone regeneration and healing. Both normal and impaired bone healing are discussed, with a focus on the spatiotemporal activity of the various growth factors known to be involved in the healing response. The review highlights the activities of most important growth factors impacting bone regeneration, with a particular emphasis on those being pursued for clinical translation or which have already been marketed as components of bone regenerative materials. Current approaches the use of bone grafts in clinical settings of bone repair (including bone grafts) are summarized, and carrier systems (scaffolds) for bone tissue engineering via localized growth factor delivery are reviewed. The chapter concludes with a consideration of how bone repair might be improved in the future.

Randomized clinical trial: expanded autologous bone marrow mesenchymal cells combined with allogeneic bone tissue, compared with autologous iliac crest graft in lumbar fusion surgery

BACKGROUND CONTEXT

Although autogenous iliac crest bone graft (AICBG) is considered the gold-standard graft material for spinal fusion, new bone substitutes are being developed to avoid associated complications and disadvantages. By combining autologous bone marrow mesenchymal stromal cells (MSCs) expanded ex vivo and allogenic cancellous bone graft, we obtain a tissue-engineered product that is osteoconductive and potentially more osteogenic and osteoinductive than AICBG, owing to the higher concentration of MSCs.

PURPOSE

This study aimed to evaluate the feasibility and safety of implanting a tissue-engineered product consisting of expanded bone marrow MSCs loaded onto allograft bone (MSC+allograft) for spinal fusion in degenerative spine disease, as well as to assess its clinical and radiological efficacy.

STUDY DESIGN/SETTING

A prospective, multicenter, open-label, blinded-reader, randomized, parallel, single-dose phase I-II clinical trial.

PATIENT SAMPLE

A total of 73 adult patients from 5 hospitals, with Meyerding grade I-II L4-L5 degenerative spondylolisthesis and/or with L4-L5 degenerative disc disease who underwent spinal fusion through transforaminal lumbar interbody fusion (TLIF).

OUTCOME MEASURES

Spinal fusion was assessed by plain X-ray at 3, 6, and 12 months and by computed tomography (CT) at 6 and 12 months post-treatment. An independent radiologist performed blinded assessments of all images. Clinical outcomes were measured as change from baseline value: visual analog scale for lumbar and sciatic pain at 12 days, 3, 6, and 12 months posttreatment, and Oswestry Disability Index and Short Form-36 at 3, 6, and 12 months posttreatment.

METHODS

Patients who underwent L4-L5 TLIF were randomized for posterior graft type only, and received either MSC+allograft (the tissue-engineered product, group A) or AICBG (standard graft material, group B). Standard graft material was used for anterior fusion in all patients. Feasibility was measured primarily as the percentage of randomized patients who underwent surgery in each treatment group. Safety was assessed by analyzing treatment-emergent adverse events (AEs) for the full experimental phase and appraising their relationship to the experimental treatment. Outcome measures, both radiological and clinical, were compared between the groups.

RESULTS

Seventy-three patients were randomized in this study, 36 from the MSC+allograft group and 37 from the AICBG group, and 65 were surgically treated (31 group A, 34 group B). Demographic and comorbidity data showed no difference between groups. Most patients were diagnosed with grade I or II degenerative spondylolisthesis. MSC+allograft was successfully implanted in 86.1% of randomized group A patients. Most patients suffered treatment-emergent AEs during the study (88.2% in group A and 97.1% in group B), none related to the experimental treatment. X-ray-based rates of posterior spinal fusion were significantly higher for the experimental group at 6 months (p=.012) and 12 months (p=.0003). CT-based posterior fusion rates were significantly higher for MSC+allograft at 6 months (92.3% vs 45.7%; p=.0001) and higher, but not significantly, at 12 months (76.5% vs 65.7%; p=.073). CT-based complete response (defined as the presence of both posterior intertransverse fusion and anterior interbody fusion) was significantly higher at 6 months for MSC+allograft than for AICBG (70.6% vs 40%; p=.0038), and remained so at 12 months (70.6% vs 51.4%; p=.023). Clinical results including patient-reported outcomes improved postsurgery, although there were no differences between groups.

CONCLUSIONS

Compared with the current gold standard, our experimental treatment achieved a higher rate of posterior spinal fusion and radiographic complete response to treatment at 6 and 12 months after surgery. The treatment clearly improved patient quality of life and decreased pain and disability at rates similar to those for the control arm. The safety profile of the tissue-engineered product was also similar to that for the standard material, and no AEs were linked to the product. Procedural AEs did not increase as a result of BM aspiration. The use of expanded bone marrow MSCs combined with cancellous allograft is a feasible and effective technique for spinal fusion, with no product-related AEs found in our study.

Supramolecular self-assembling peptides to deliver bone morphogenetic proteins for skeletal regeneration

Recombinant human bone morphogenetic proteins (BMPs) have shown clinical success in promoting bone healing, but they are also associated with unwanted side effects. The development of improved BMP carriers that can retain BMP at the defect site and maximize its efficacy would decrease the therapeutic BMP dose and thus improve its safety profile. In this review, we discuss the advantages of using self-assembling peptides, a class of synthetic supramolecular biomaterials, to deliver recombinant BMPs. Peptide amphiphiles (PAs) are a broad class of self-assembling peptides, and the use of PAs for BMP delivery and bone regeneration has been explored extensively over the past decade. Like many self-assembling peptide systems, PAs can be designed to form nanofibrous supramolecular biomaterials in which molecules are held together by non-covalent bonds. Chemical and biological functionality can be added to PA nanofibers, through conjugation of chemical moieties or biological epitopes to PA molecules. For example, PA nanofibers have been designed to bind heparan sulfate, a natural polysaccharide that is known to bind BMPs and potentiate their signal. Alternatively, PA nanofibers have been designed to synthetically mimic the structure and function of heparan sulfate, or to directly bind BMP specifically. In small animal models, these bio-inspired PA materials have shown the capacity to promote bone regeneration using BMP at doses 10-100 times lower than established therapeutic doses. These promising results have motivated further evaluation of PAs in large animal models, where their safety and efficacy must be established before clinical translation. We conclude with a discussion on the possiblity of combining PAs with other materials used in orthopaedic surgery to maximize their utility for clinical translation.

Effect of the type of electrical stimulation on spinal fusion in a rat posterolateral spinal fusion model

BACKGROUND CONTEXT

Posterolateral fusion (PLF) with autogenous iliac bone graft is one of the most common surgical procedures for lumbar spinal disease. However, its limited success demands new biologically competent graft enhancers or substitutes. Although the use of direct current (DC) electrical stimulation has been shown to increase rate of successful spinal fusions, little is known about the effect of the type of current in DC stimulation.

PURPOSE

To evaluate the effects of various DC stimulators on the strength and success rate of posterolateral fusion facilitated by using a nitinol mesh container, in rats.

STUDY DESIGN

This was an experimental animal study.

METHODS

A conductive, tubular nitinol mesh container was used to carry small pieces of bone grafts. The nitinol mesh container received electrical stimulation via a lead that connected the container to different types of DC stimulators. Sixty male Sprague-Dawley rats were divided into three groups (N=20 in each): a control group that underwent PLF with a nitinol container filled with autograft, a constant DC group that received a nitinol container and constant DC (100 μA), and a pulsed DC group that received a nitinol container and pulsed DC (100 μA, 100 Hz, 200 μs). The rats underwent PLF between L4 and L5, and transverse processes were grafted with bilateral iliac grafts. A stimulator was implanted subcutaneously. The rats were sacrificed 8 weeks postsurgery, and lumbar spines were removed. Spinal fusion was evaluated by microcomputed tomography, manual testing, biomechanical testing, histologic examination, and molecular analysis.

RESULTS

All animals in the DC stimulation groups displayed solid fusion, whereas only 70% of control animals showed solid fusion. Radiographic images, biomechanical testing, histologic examination, and molecular analysis revealed improved fusion in the order control group<constant DC group<pulsed DC group. The volume of new bone mass was significantly higher in the pulsed DC group (p<.05). Fusion was more solid in the pulsed DC group than in control group (p<.05). The pulsed DC group displayed the lowest inflammatory responses.

CONCLUSIONS

Pulsed DC electrical stimulation is efficacious in improving both strength and fusion rate in a rat spinal fusion model. In addition, tubular nitinol mesh, made of conductive suture, appears useful for holding small pieces of bone grafts and maintaining a good environment for bone fusion.

CLINICAL RELEVANCE

Pulsed DC electrical stimulation may be potentially useful to increase the fusion rate after spinal fusion in humans. Future research is required to evaluate the safety and efficacy of tubular nitinol mesh and pulsed DC electrical stimulation in humans.

Engineered periosteum-bone biomimetic bone graft enhances posterolateral spine fusion in a rabbit model

BACKGROUND CONTEXT

Bone marrow derived mesenchymal stem cells (BMSCs) and periosteum-derived cells (PDCs) have shown great viability in terms of osteogenic potential and have been considered the major cellular source for skeletal tissue engineering. Using a PDCs-impregnated cell sheet to surround a BMSCs-impregnated tricalcium phosphate (TCP) scaffold might create a periosteum-bone biomimetic bone graft substitute to enhance spine fusion.

PURPOSE

The purpose of this study was to determine the feasibility of using this newly tissue-engineered biomimetic bone graft for posterolateral spine fusion.

STUDY DESIGN/SETTING

This study design was based on an animal model using adult male New Zealand White rabbits.

METHODS

New Zealand White rabbits underwent operation and were divided into three groups based on the experimental material implanted in the bilateral L4-L5 intertransverse space. Group 1 was BMSCs-free TCP wrapped in a PDCs-free cell sheet. Group 2 was BMSCs-loaded-TCP wrapped in a PDCs-free cell sheet. Group 3 was BMSCs-loaded-TCP wrapped in a PDCs-loaded cell sheet. After 12 weeks, six rabbits from each group were euthanized for computed tomography scanning, manual palpation, biomechanical testing, and histology. Each group had 12 radiographic fusion areas for analysis because the right and left intertransverse fusion areas were collected separately.

RESULTS

Radiographic union of 12 fusion areas for groups 1, 2, and 3 was 0, 3, and 9, respectively. Group 3 had significantly higher fusion success than groups 1 and 2 (p<.001). Solid fusion of six fusion segments in each group by manual palpation was 0, 1, and 5, accordingly. Group 3 had a higher successful solid fusion rate than groups 1 and 2 (p=.005). The average maximal torques at failure were 727±136 N mm, 627±91 N mm, and 882±195 N mm for groups 1, 2, and 3, accordingly. The maximal torque was significantly higher in group 3 than in group 2 (p=.028). Histological evaluation verified that new bone regeneration were greater in the group 3 samples.

CONCLUSIONS

The results indicated the potential of using a PDCs-impregnated cell sheet to surround the BMSCs-impregnated TCP scaffold for creating a periosteum-bone biomimetic bone graft substitute to enhance bone regeneration and posterolateral fusion success.

Positive effect on spinal fusion by the combination of platelet-rich plasma and collagen-mineral scaffold using lumbar posterolateral fusion model in rats

Background

Platelet-rich plasma (PRP) is autologous in origin and contains a high concentration of platelets which is a source of various growth factors. Previous studies have suggested that PRP has a positive effect in accelerating fusion by an autologous bone graft in a lumbar fusion. The role of PRP on artificial bone grafts in spinal fusion remains controversial. In this study, positive effect on spinal fusion by PRP was hypothesized; in vitro and in vivo studies were designed to test this hypothesis.

Methods

PRP was produced from peripheral blood of Sprague-Dawley (SD) rats. A lumbar posterolateral arthrodesis model was used to test the efficacy of PRP on spinal fusion. Thirty SD rats were divided into three groups by different implants: the PRP group, PRP plus collagen-mineral carrier; the platelet-poor plasma (PPP) group, PPP plus collagen-mineral carrier; and the control group, collagen-mineral only. Spinal fusion was examined using plain radiographs, micro-computed tomography (micro-CT), manual palpation, and histological analysis. The fusion rate by micro-CT and that by manual palpation in groups were compared.

Results

In the micro-CT results, 16 fused segments were observed in the PRP group (80%, 16/20), 2 in the PPP group (10%, 2/20), and 2 in the control group (10%, 2/20). The fusion rate, determined by manual palpation, was 60% (6/10) in the PRP group, 0% (0/10) in the PPP group, and 0% (0/10) in the control group. Histology showed that the PRP group had more new bone and matured marrow formation.

Conclusions

The results of this study demonstrated that PRP on an artificial bone carrier had positive effects on lumbar spinal fusion in rats. In the future, this composite could be potentially used as a bone graft in humans.

Stem Cells in Spinal Fusion

STUDY DESIGN

Review of literature.

OBJECTIVES

This review of literature investigates the application of mesenchymal stem cells (MSCs) in spinal fusion, highlights potential uses in the development of bone grafts, and discusses limitations based on both preclinical and clinical models.

METHODS

A review of literature was conducted looking at current studies using stem cells for augmentation of spinal fusion in both animal and human models.

RESULTS

Eleven preclinical studies were found that used various animal models. Average fusion rates across studies were 59.8% for autograft and 73.7% for stem cell-based grafts. Outcomes included manual palpation and stressing of the fusion, radiography, micro-computed tomography (μCT), and histological analysis. Fifteen clinical studies, 7 prospective and 8 retrospective, were found. Fusion rates ranged from 60% to 100%, averaging 87.1% in experimental groups and 87.2% in autograft control groups.

CONCLUSIONS

It appears that there is minimal clinical difference between commercially available stem cells and bone marrow aspirates indicating that MSCs may be a good choice in a patient with poor marrow quality. Overcoming morbidity and limitations of autograft for spinal fusion, remains a significant problem for spinal surgeons and further studies are needed to determine the efficacy of stem cells in augmenting spinal fusion.

Formulation, Delivery and Stability of Bone Morphogenetic Proteins for Effective Bone Regeneration

Bone morphogenetic proteins (BMPs) are responsible for bone formation during embryogenesis and bone regeneration and remodeling. The osteoinductive action of BMPs, especially BMP-2 and BMP-7, has led to their use in a range of insurmountable treatments where intervention is required for effective bone regeneration. Introduction of BMP products to the market, however, was not without reports of multiple complications and side effects. Aiming for optimization of the therapeutic efficacy and safety, efforts have been focused on improving the delivery of BMPs to lower the administered dose, localize the protein, and prolong its retention time at the site of action. A major challenge with these efforts is that the protein stability should be maintained. With this review we attempt to shed light on how the stability of BMPs can be affected in the formulation and delivery processes. We first provide a short overview of the current standing of the complications experienced with BMP products. We then discuss the different delivery parameters studied in association with BMPs, and their influence on the efficacy and safety of BMP treatments. In particular, the literature addressing the stability of BMPs and their possible interactions with components of the delivery system as well as their sensitivity to conditions of the formulation process is reviewed. In summary, recent developments in the fields of bioengineering and biopharmaceuticals suggest that a good understanding of the relationship between the formulation/delivery conditions and the stability of growth factors such as BMPs is a prerequisite for a safe and effective treatment.

An allograft generated from adult stem cells and their secreted products efficiently fuses vertebrae in immunocompromised athymic rats and inhibits local immune responses

BACKGROUND CONTEXT

Spine pain and the disability associated with it are epidemic in the United States. According to the National Center for Health Statistics, more than 650,000 spinal fusion surgeries are performed annually in the United States, and yet there is a failure rate of 15%-40% when standard methods employing current commercial bone substitutes are used. Autologous bone graft is the gold standard in terms of fusion success, but the morbidity associated with the procedure and the limitations in the availability of sufficient material have limited its use in the majority of cases. A freely available and immunologically compatible bone mimetic with the properties of live tissue is likely to substantially improve the outcome of spine fusion procedures without the disadvantages of autologous bone graft.

PURPOSE

This study aimed to compare a live human bone tissue analog with autologous bone grafting in an immunocompromised rat model of posterolateral fusion.

DESIGN/SETTING

This is an in vitro and in vivo preclinical study of a novel human stem cell-derived construct for efficacy in posterolateral lumbar spine fusion.

METHODS

Osteogenically enhanced human mesenchymal stem cells (OEhMSCs) were generated by exposure to conditions that activate the early stages of osteogenesis. Immunologic characteristics of OEhMSCs were evaluated in vitro. The secreted extracellular matrix from OEhMSCs was deposited on a clinical-grade gelatin sponge, resulting in bioconditioned gelatin sponge (BGS). Bioconditioned gelatin sponge was used alone, with live OEhMSCs (BGS+OEhMSCs), or with whole human bone marrow (BGS+hBM). Efficacy for spine fusion was determined by an institutionally approved animal model using 53 nude rats.

RESULTS

Bioconditioned gelatin sponge with live OEhMSCs did not cause cytotoxicity when incubated with immunologically mismatched lymphocytes, and OEhMSCs inhibited lymphocyte expansion in mixed lymphocyte assays. Bioconditioned gelatin sponge with live OEhMSC and BGS+hBM constructs induced profound bone growth at fusion sites in vivo, with a comparable rate of fusion with syngeneic bone graft (negative [0 of 10], BGS alone [0 of 10], bone graft [7 of 10], BGS+OEhMSC [10 of 15], and BGS+hBM [8 of 8]).

CONCLUSIONS

Collectively, these studies demonstrate that BGS+OEhMSC constructs possess low immunogenicity and drive vertebral fusion with efficiency matching syngeneic bone graft in rodents. We also demonstrate that BGS serves as a promising scaffold for spine fusion when combined with hBM.

Mesenchymal Stem Cells for the Treatment of Spinal Arthrodesis: From Preclinical Research to Clinical Scenario

The use of spinal fusion procedures has rapidly augmented over the last decades and although autogenous bone graft is the “gold standard” for these procedures, alternatives to its use have been investigated over many years. A number of emerging strategies as well as tissue engineering with mesenchymal stem cells (MSCs) have been planned to enhance spinal fusion rate. This descriptive systematic literature review summarizes the in vivo studies, dealing with the use of MSCs in spinal arthrodesis surgery and the state of the art in clinical applications. The review has yielded promising evidence supporting the use of MSCs as a cell-based therapy in spinal fusion procedures, thus representing a suitable biological approach able to reduce the high cost of osteoinductive factors as well as the high dose needed to induce bone formation. Nevertheless, despite the fact that MSCs therapy is an interesting and important opportunity of research, in this review it was detected that there are still doubts about the optimal cell concentration and delivery method as well as the ideal implantation techniques and the type of scaffolds for cell delivery. Thus, further inquiry is necessary to carefully evaluate the clinical safety and efficacy of MSCs use in spine fusion.

Enhancement of posterolateral lumbar spine fusion using recombinant human bone morphogenetic protein-2 and mesenchymal stem cells delivered in fibrin glue

Mesenchymal stem cells have shown great potential for accelerating bone healing. In the present study, we evaluate the efficacy of fibrin glue/mesenchymal stem cells/recombinant human bone morphogenetic protein-2 composite for posterolateral spinal fusion in a rabbit model. Forty adult rabbits underwent posterolateral intertransverse fusion at the L5–L6 level. The animals were randomly divided into four groups based on the implant material: fibrin glue, fibrin glue/mesenchymal stem cells composite, fibrin glue-recombinant human bone morphogenetic protein-2 (fibrin glue/recombinant human bone morphogenetic protein-2) composite, and fibrin glue/mesenchymal stem cells/recombinant human bone morphogenetic protein-2 composite. After six weeks, the rabbits were euthanized for manual palpation, radiographic examination, biomechanical testing, and histology. Manual palpation results showed that the fusion rate for fibrin glue, fibrin glue/mesenchymal stem cells, fibrin glue/recombinant human bone morphogenetic protein-2, and fibrin glue/mesenchymal stem cells/recombinant human bone morphogenetic protein-2 was 0, 0, 40%, and 70%, respectively. Moreover, fusion rate determined by radiographic examination for fibrin glue, fibrin glue/mesenchymal stem cells, fibrin glue/recombinant human bone morphogenetic protein-2, and fibrin glue/mesenchymal stem cells/recombinant human bone morphogenetic protein-2 was 0, 0, 40%, and 80%, respectively. Gray analysis showed that fibrin glue/recombinant human bone morphogenetic protein-2 group had higher ossification area and density than fibrin glue group; and fibrin glue/mesenchymal stem cells/recombinant human bone morphogenetic protein-2 group had higher ossification area and density than fibrin glue/recombinant human bone morphogenetic protein-2 group. Formation of continuous bone masses between L5 and L6 level in mesenchymal stem cells/recombinant human bone morphogenetic protein-2/fibrin glue group was further confirmed by computed tomography scanning and three-dimensional reconstruction. Biomechanical testing demonstrated that the fusion strength (flexion, extension, lateral bending, and axial rotation) in fibrin glue/mesenchymal stem cells/recombinant human bone morphogenetic protein-2 group is significantly higher than that in fibrin glue/recombinant human bone morphogenetic protein-2 group. The formation of mature bone tissues between transverse processes of the fused specimens from both fibrin glue/recombinant human bone morphogenetic protein-2, and fibrin glue/mesenchymal stem cells/recombinant human bone morphogenetic protein-2 groups was confirmed by HE staining, and quantitative real-time polymerase chain reaction results showed the upregulation of CD31, type I collagen, osteocalcin, and osteonectin in the fibrin glue/mesenchymal stem cells/recombinant human bone morphogenetic protein-2 group. In conclusion, our findings show that mesenchymal stem cells delivered with recombinant human bone morphogenetic protein-2 using fibrin glue as carrier are more effective in enhancing spine fusion than recombinant human bone morphogenetic protein-2 without mesenchymal stem cells in the rabbit model.

Bone Marrow Mesenchymal Stem Cells Expressing Baculovirus-Engineered Bone Morphogenetic Protein-7 Enhance Rabbit Posterolateral Fusion

Previous studies have suggested that bone marrow-derived mesenchymal stem cells (BMDMSCs) genetically modified with baculoviral bone morphogenetic protein-2 (Bac-BMP-2) vectors could achieve successful fusion in a femur defect model or in a spinal fusion model. In this study, BMDMSCs expressing BMP-7 (Bac-BMP-7-BMDMSCs) were generated. We hypothesized that Bac-BMP-7-BMDMSCs could secrete more BMP-7 than untransduced BMDMSCs in vitro and achieve spinal posterolateral fusion in a rabbit model. Eighteen rabbits underwent posterolateral fusion at L4-5. Group I (n = 6) was implanted with collagen-β-tricalcium phosphate (TCP)-hydroxyapatite (HA), Group II (n = 6) was implanted with collagen-β-TCP-HA plus BMDMSCs, and Group III (n = 6) was implanted with collagen-β-TCP-HA plus Bac-BMP-7-BMDMSCs. In vitro production of BMP-7 was quantified with an enzyme-linked immunosorbent assay (ELISA). Spinal fusion was examined using computed tomography (CT), manual palpation, and histological analysis. ELISA demonstrated that Bac-BMP-7-BMDMSCs produced four-fold to five-fold more BMP-7 than did BMDMSCs. In the CT results, 6 fused segments were observed in Group I (50%, 6/12), 8 in Group II (67%, 8/12), and 12 in Group III (100%, 12/12). The fusion rate, determined by manual palpation, was 0% (0/6) in Group I, 0% (0/6) in Group II, and 83% (5/6) in Group III. Histology showed that Group III had more new bone and matured marrow formation. In conclusion, BMDMSCs genetically transduced with the Bac-BMP-7 vector could express more BMP-7 than untransduced BMDMSCs. These Bac-BMP-7-BMDMSCs on collagen-β-TCP-HA scaffolds were able to induce successful spinal fusion in rabbits.

Elastin-like-polypeptide based fusion proteins for osteogenic factor delivery in bone healing

Modern treatments of bone injuries and diseases are becoming increasingly dependent on the usage of growth factors to stimulate bone growth. Bone morphogenetic protein-2 (BMP-2), a potent osteogenic inductive protein, exhibits promising results in treatment models, but recently has had its practical efficacy questioned due to the lack of local retention, ectopic bone formation, and potentially lethal inflammation. Where a new delivery technique of the BMP-2 is necessary, here we demonstrate the viability of an elastin-like peptide (ELP) fusion protein containing BMP-2 for delivery of the BMP-2. This fusion protein retains the performance characteristics of both the BMP-2 and ELP. The fusion protein was found to induce osteogenic differentiation of mesenchymal stem cells as evidenced by the production of alkaline phosphatase and extracellular calcium deposits in response to treatment by the fusion protein. Retention of the ELPs inverse phase transition property has allowed for expression of the fusion protein within a bacterial host (such as Escherichia coli) and easy and rapid purification using inverse transition cycling. The fusion protein formed self-aggregating nanoparticles at human-body temperature. The data collected suggests the viability of these fusion protein nanoparticles as a dosage-efficient and location-precise noncytotoxic delivery vehicle for BMP-2 in bone treatment. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1029-1037, 2016.

Bone marrow-derived mesenchymal stem cells assembled with low-dose BMP-2 in a three-dimensional hybrid construct enhances posterolateral spinal fusion in syngeneic rats

BACKGROUND CONTEXT

The combination of potent osteoinductive growth factor, functional osteoblastic cells, and osteoconductive materials to induce bone formation is a well-established concept in bone tissue engineering. However, supraphysiological dose of growth factor, such as recombinant human bone morphogenetic protein 2 (rhBMP-2), which is necessary in contemporary clinical application, have been reported to result in severe side effects.

PURPOSE

We hypothesize that the synergistic osteoinductive capacity of low-dose bone morphogenetic protein 2 (BMP-2) combined with undifferentiated bone marrow-derived stromal cells (BMSCs) is comparable to that of osteogenically differentiated BMSCs when used in a rodent model of posterolateral spinal fusion.

STUDY DESIGN/SETTING

A prospective study using a rodent model of posterolateral spinal fusion was carried out.

PATIENT SAMPLE

Thirty-six syngeneic Fischer rats comprised the patient sample.

METHODS

Six groups of implants were evaluated as follows (n=6): (1) 10 µg BMP-2 with undifferentiated BMSCs; (2) 10 µg BMP-2 with osteogenic-differentiated BMSCs; (3) 2.5 µg BMP-2 with undifferentiated BMSCs; (4) 2.5 µg BMP-2 with osteogenic-differentiated BMSCs; (5) 0.5 µg BMP-2 with undifferentiated BMSCs; and (6) 0.5 µg BMP-2 with osteogenic-differentiated BMSCs. Optimal in vitro osteogenic differentiation of BMSCs was determined by quantitative real-time polymerase chain reaction (qRT-PCR) gene analysis whereas in vivo bone formation capacity was evaluated by manual palpation, micro-computed tomography, and histology.

RESULTS

Rat BMSCs cultured in fibrin matrix that was loaded into the pores of medical-grade poly epsilon caprolactone tricalcium phosphate scaffolds differentiated toward osteogenic lineage by expressing osterix, runt-related transcription factor 2, and osteocalcium mRNA when supplemented with dexamethasone, ascorbic acid, and β-glycerophosphate. Whereas qRT-PCR revealed optimal increase in osteogenic genes expression after 7 days of in vitro culture, in vivo transplantation study showed that pre-differentiation of BMSCs before transplantation failed to promote posterolateral spinal fusion when co-delivered with low-dose BMP-2 (1/6 or 17% fusion rate). In contrast, combined delivery of undifferentiated BMSCs with low-dose BMP-2 (2.5 µg) demonstrated significantly higher fusion rate (4/6 or 67%) as well as significantly increased volume of new bone formation (p<.05).

CONCLUSION

In summary, this study supports the combination of undifferentiated BMSCs and low-dose rhBMP-2 for bone tissue engineering construct.

Orthopedic cellular therapy: An overview with focus on clinical trials

In this editorial, the authors tried to evaluate the present state of cellular therapy in orthopedic field. The topics the authors try to cover include not only the clinical trials but the various research areas as well. Both the target diseases for cellular therapy and the target cells were reviewed. New methods to activate the cells were interesting to review. Most advanced clinical trials were also included because several of them have advanced to phase III clinical trials. In the orthopedic field, there are many diseases with a definite treatment gap at this time. Because cellular therapies can regenerate damaged tissues, there is a possibility for cellular therapies to become disease modifying drugs. It is not clear whether cellular therapies will become the standard of care in any of the orthopedic disorders, however the amount of research being performed and the number of clinical trials that are on-going make the authors believe that cellular therapies will become important treatment modalities within several years.

Mesenchymal stem cells expressing baculovirus-engineered BMP-2 and VEGF enhance posterolateral spine fusion in a rabbit model

BACKGROUND CONTEXT

Mesenchymal stem cell (MSC)-based cell therapy and gene transfer have converged and show great potential for accelerating bone healing. Gene therapy can provide more sustained expression of osteogenic factors such as bone morphogenetic protein-2 (BMP-2). We previously demonstrated that low-dose BMP-2 enhanced spinal posterolateral fusion by MSCs in a rabbit model. Herein, we genetically modified rabbit MSCs with a recombinant baculovirus encoding BMP-2 (Bac-CB) and vascular endothelial growth factor (Bac-VEGF) seeded into porous scaffolds to enhance spinal fusion.

PURPOSE

This study evaluates the success rate of the MSC-based cell therapy and gene transfer approach for single-level posterolateral spine fusion. We hypothesize that combining three-dimensional tricalcium phosphate (TCP) scaffolds and genetically modified allogeneic MSCs with baculovirus-mediated growth factor expression would increase the success rate of spinal fusion.

STUDY DESIGN

The study design was based on an animal model (approved by the Institutional Animal Care and Use Committee) using 18 adult male New Zealand rabbits.

METHODS

This study included 18 male New Zealand rabbits, weighing 3.5 to 4 kg. Allogeneic bone marrow-derived MSCs were isolated and genetically modified with Bac-CB and Bac-CV seeded onto TCP scaffolds (MSC/Bac/TCP). The animals were divided into three groups according to the material implanted into the bilateral L4-L5 intertransverse space: TCP scaffold (n=6), MSC/TCP (n=6), and MSC/Bac/TCP (n=6). After 12 weeks, the rabbits were euthanized for radiographic examination, manual palpation, and histologic study.

RESULTS

Bilateral fusion areas in each animal were evaluated independently. The radiographic fusion rates at 12 sites were 0 of 12 in the TCP scaffold group, 4 of 12 in the MSC/TCP group, and 10 of 12 in the MSC/Bac/TCP group. By manual palpation, there were zero solid fusions in the TCP scaffold group, two solid fusions in the MSC/TCP group, and five solid fusions in the MSC/Bac/TCP group. Fusion rates were significantly greater in the MSC/Bac/TCP group.

CONCLUSIONS

The results indicate the potential of using baculovirus as a vector for gene/cell therapy approaches to improve bone healing and support the feasibility of using allogeneic MSCs for inducing bone formation and intertransverse process fusion.

Stem cells for spine surgery

In the past few years, stem cells have become the focus of research by regenerative medicine professionals and tissue engineers. Embryonic stem cells, although capable of differentiating into cell lineages of all three germ layers, are limited in their utilization due to ethical issues. In contrast, the autologous harvest and subsequent transplantation of adult stem cells from bone marrow, adipose tissue or blood have been experimentally utilized in the treatment of a wide variety of diseases ranging from myocardial infarction to Alzheimer’s disease. The physiologic consequences of stem cell transplantation and its impact on functional recovery have been studied in countless animal models and select clinical trials. Unfortunately, the bench to bedside translation of this research has been slow. Nonetheless, stem cell therapy has received the attention of spinal surgeons due to its potential benefits in the treatment of neural damage, muscle trauma, disk degeneration and its potential contribution to bone fusion.

Stem cells in preclinical spine studies

BACKGROUND CONTEXT

The recent identification and characterization of mesenchymal stem cells have introduced a shift in the research focus for future technologies in spinal surgery to achieve spinal fusion and treat degenerative disc disease. Current and past techniques use allograft to replace diseased tissue or rely on host responses to recruit necessary cellular progenitors. Adult stem cells display long-term proliferation, efficient self-renewal, and multipotent differentiation.

PURPOSE

This review will focus on two important applications of stem cells in spinal surgery: spine fusion and the management of degenerative disc disease.

STUDY DESIGN

Review of the literature.

METHODS

Relevant preclinical literature regarding stem cell sources, growth factors, scaffolds, and animal models for both osteogenesis and chondrogenesis will be reviewed, with an emphasis on those studies that focus on spine applications of these technologies.

RESULTS

In both osteogenesis and chondrogenesis, adult stem cells derived from bone marrow or adipose show promise in preclinical studies. Various growth factors and scaffolds have also been shown to enhance the properties and eventual clinical potential of these cells. Although its utility in clinical applications has yet to be proven, gene therapy has also been shown to hold promise in preclinical studies.

CONCLUSIONS

The future of spine surgery is constantly evolving, and the recent advancements in stem cell-based technologies for both spine fusion and the treatment of degenerative disc disease is promising and indicative that stem cells will undoubtedly play a major role clinically. It is likely that these stem cells, growth factors, and scaffolds will play a critical role in the future for replacing diseased tissue in disease processes such as degenerative disc disease and in enhancing host tissue to achieve more reliable spine fusion.

Spinal fusion in the next generation: gene and cell therapy approaches

Bone fusion represents a challenge in the orthopedics practice, being especially indicated for spine disorders. Spinal fusion can be defined as the bony union between two vertebral bodies obtained through the surgical introduction of an osteoconductive, osteoinductive, and osteogenic compound. Autogenous bone graft provides all these three qualities and is considered the gold standard. However, a high morbidity is associated with the harvest procedure. Intensive research efforts have been spent during the last decades to develop new approaches and technologies for successful spine fusion. In recent years, cell and gene therapies have attracted great interest from the scientific community. The improved knowledge of both mesenchymal stem cell biology and osteogenic molecules allowed their use in regenerative medicine, representing attractive approaches to achieve bone regeneration also in spinal surgery applications. In this review we aim to describe the developing gene- and cell-based bone regenerative approaches as promising future trends in spine fusion.

Comparison of TLIF with rhBMP-2 versus no TLIF and higher posterolateral rhBMP-2 dose at L5-S1 for long fusions to the sacrum with sacropelvic fixation in patients with primary adult deformity

STUDY DESIGN

Comparvative case series. Data was prospectively entered and retrospectively analyzed.

OBJECTIVE

To evaluate the need for distal lumbar interbody fusion when sufficient recombinant human bone morphogenetic protein-2 (rhBMP-2) is used posterolaterally at L5-S1 in long spinal constructs for adult deformity via costs and radiographical and patient-reported outcome comparisons.

SUMMARY OF BACKGROUND DATA

Many authors and investigators have suggested that an interbody fusion is mandatory at L5-S1 with long fusion to the sacrum with sacropelvic fixation. Past studies have shown competitive fusion rates using rhBMP-2 versus iliac crest bone graft for long fusions. There are various advocates for anterior lumbar interbody fusion versus posterior lumbar interbody fusion versus transforaminal lumbar interbody fusion (TLIF). The optimal strategy remains elusive.

METHODS

Fifty-seven patients were studied at one institution. Thirty-one patients had no interbody fusion (NI group) with 20 mg of rhBMP-2 posterolaterally on 10 mL of carrier and 26 patients had TLIF at L5-S1 (TLIF group) with 6 mg of rhBMP-2 in the interbody space along with local bone graft and 6 mg of rhBMP-2 on carrier posterolaterally at L5-S1. Patients were followed for 24 to 87 months (mean follow-up, 3.92 yr). Demographics of the 2 groups were similar.

RESULTS

There were no detected nonunions at L5-S1 in either group. By our limited cost analysis, the expense of performing a TLIF at L5-S1 is higher than that of using extra rhBMP-2 posterolaterally at that segment. Improvement in outcomes scores, namely Scoliosis Research Society-22 and Oswestry Disability Index, were the same statistically in both groups. Blood loss was greater in the TLIF group than the NI group. There were no identified rhBMP-2 adverse events in either group.

CONCLUSION

Utilization of 20 mg of rhBMP-2 at L5-S1 has the potential to be less expensive than an interbody fusion in most patients having a primary long fusion for adult spinal deformity. The apparent fusion rates at L5-S1 were identical in both groups. Both strategies were successful in regard to improving patient outcomes and achieving apparent solid arthrodesis at the lumbosacral junction, which was the focus of this study.

LEVEL OF EVIDENCE

2.

Factors influencing arthrodesis rates in a rabbit posterolateral spine model with iliac crest autograft

PURPOSE

The rabbit posterolateral intertransverse spine arthrodesis model has been widely used to evaluate spinal biologics. However, to date, the validity and reproducibility of performance of iliac crest bone graft, the most common and critical control group, has not been firmly established. We evaluated original research publications that utilized this model, identified which experimental conditions affected fusion rates, and developed an algorithm to predict fusion rates for future study designs.

METHODS

A MEDLINE search was performed for publications through December, 2011 that utilized this model to evaluate fusion rates elicited by iliac crest autograft. All study parameters were recorded, and logistic regression analyses were performed to determine the effects of these variables on fusion rates as determined by either manual palpation or radiographs.

RESULTS

Seventy studies with 959 rabbits in 102 groups met the inclusion criteria. Excluding studies that measured fusion at 4 or fewer weeks or intentionally tried to decrease the fusion rate, the overall fusion rate for autograft was 58.3 ± 16.3 % (mean ± SD) as determined by manual palpation and 66.4 ± 17.8 % by plain radiographs. Regression analysis demonstrated a difference between these outcome measures with a trend towards significance (p = 0.09). Longer time points and larger volumes of autograft resulted in significantly greater reported fusion rates (p < 0.0001 and p < 0.05, respectively). Neither strain, age, weight, nor vertebral level significantly affected fusion rates.

CONCLUSIONS

Although experimental conditions varied across studies, time point evaluation and autograft volume significantly affected fusion rates. Despite some variability demonstrated across certain studies, we demonstrated that when the time point and volume of autograft were controlled for, the iliac crest control group of the rabbit posterolateral spinal arthrodesis model is both reliable and predictably affected by different experimental conditions.

Tissue engineering strategies in spinal arthrodesis: the clinical imperative and challenges to clinical translation

Skeletal disorders requiring the regeneration or de novo production of bone present considerable reconstructive challenges and are one of the main driving forces for the development of skeletal tissue engineering strategies. The skeletal or mesenchymal stem cell is a fundamental requirement for osteogenesis and plays a pivotal role in the design and application of these strategies. Research activity has focused on incorporating the biological role of the mesenchymal stem cell with the developing fields of material science and gene therapy in order to create a construct that is not only capable of inducing host osteoblasts to produce bone, but is also osteogenic in its own right. This review explores the clinical need for reparative approaches in spinal arthrodesis, identifying recent tissue engineering strategies employed to promote spinal fusion, and considers the ongoing challenges to successful clinical translation.

Enhanced control of in vivo bone formation with surface functionalized alginate microbeads incorporating heparin and human bone morphogenetic protein-2

In this study, we tested the hypothesis that a surface functionalization delivery platform incorporating heparin onto strontium alginate microbeads surfaces would convert this "naive carriers" into "mini-reservoirs" for localized in vivo delivery of recombinant human bone morphogenetic protein-2 (rhBMP-2) that will induce functional bone regeneration. In vitro evaluation confirmed that (1) heparin incorporation could immobilize and prolong rhBMP-2 release for approximately 3 weeks; (2) a significant decrease (p<0.01) in rhBMP-2 burst release is attainable depending on initial protein load; and (3) rhBMP-2 released from surface functionalized microbeads retained bioactivity and stimulated higher alkaline phosphatase activity in cultured C(2)C(12) cells when compared with daily administration of fresh bolus rhBMP-2. Subsequently, surface functionalized microbeads were used for in vivo delivery of rhBMP-2 at local sites of posterolateral spinal fusion surgery in rats. The microbeads were loaded into the pores of medical-grade polyepsilone caprolactone-tricalcium phosphate scaffolds before implantation. Results revealed robust bone formation and a biomechanically solid fusion after 6 weeks. When compared with a control group consisting of an equivalent amount of rhBMP-2 that was directly adsorbed onto bare-surfaced microbeads with no heparin, a 5.3-fold increase in bone volume fraction and a 2.6-fold increase in bending stiffness (flexion/extension) were observed. When compared with collagen sponge carriers of rhBMP-2, a 1.5-fold and a 1.3-fold increase in bone volume fraction and bending stiffness were observed, respectively. More importantly, 3D micro-computed tomography images enabled the visualization of a well-contained newly formed bone at ipsilateral implant sites with surface functionalized rhBMP-2 delivery. This was absent with collagen sponge carriers where newly formed bone tissue was poorly contained and crossed over the posterior midline to contralateral implants. These findings are important because of complications with current rhBMP-2 delivery method, including excessive, uncontrolled bone formation.

Studies of bone morphogenetic protein-based surgical repair

Over the past several decades, recombinant human bone morphogenetic proteins (rhBMPs) have been the most extensively studied and widely used osteoinductive agents for clinical bone repair. Since rhBMP-2 and rhBMP-7 were cleared by the U.S. Food and Drug Administration for certain clinical uses, millions of patients worldwide have been treated with rhBMPs for various musculoskeletal disorders. Current clinical applications include treatment of long bone fracture non-unions, spinal surgeries, and oral maxillofacial surgeries. Considering the growing number of recent publications related to clincal research of rhBMPs, there exists enormous promise for these proteins to be used in bone regenerative medicine. The authors take this opportunity to review the rhBMP literature paying specific attention to the current applications of rhBMPs in bone repair and spine surgery. The prospective future of rhBMPs delivered in combination with tissue engineered scaffolds is also reviewed.

Peculiarities of using stem cells for regeneration of the bone and cartilage tissue

Scientific literature about the use of MSC contains clinical and experimental data on the efficiency of cell technologies for restoration of the osteoarticular apparatus. The use of MSC immobilized in the appropriate carriers and differentiation of these cells towards the bone cells and chondrocytes are of crucial importance. However, the use of MSC, both individual and in combination with other preparations and substances has a number of drawbacks and advantages. The absence of published reports on contraindications and complications of cell therapy is worthy of note, because the analysis of unsuccessful application of MSC will help to determine the indication for this treatment, and hence, to improve the efficiency of cell technologies in the future. Wider use of MSC in clinical practice and experimental studies for acceleration of reparative processes in the bone and cartilage tissue seems to be promising.

Titanium and tantalum as mesenchymal stem cell scaffolds for spinal fusion: an in vitro comparative study

INTRODUCTION

In the last few years, great interest has been focused on tissue engineering as a potential therapeutic approach for musculoskeletal diseases. The role of metallic implants for spinal fusion has been tested in preclinical and clinical settings. Titanium and tantalum have excellent biocompatibility and mechanical properties and are being used in this situation. On the other hand, the therapeutic role of mesenchymal stem cells (MSC) is extensively explored for their multilineage differentiation into osteoblasts.

OBJECTIVES

In vitro comparison of titanium and tantalum as MSCs scaffolds.

MATERIAL AND METHODS

In the present study, we have compared the in vitro expansion capacity, viability, immunophenotype (both explored by flow cytometry) and multi-differentiation ability of MSC cultured in the presence of either titanium or tantalum fragments. The adherence of MSC to either metal was demonstrated by electron microscopy.

RESULTS

Both metals were able to carry MSC when transferred to new culture flasks. In addition, our study shows that culture of MSC with titanium or tantalum improves cell viability and maintains all their biological properties, with no significant differences regarding the metal employed.

CONCLUSION

This would support the use of these combinations for clinical purposes, especially in the spinal fusion and reconstruction setting.

Vertical bone augmentation with simultaneous implant placement using particulate mineralized bone and mesenchymal stem cells: a preliminary study in rabbit

This study aimed to assess vertical bone augmentation with simultaneous implant placement in rabbit tibiae using particulate mineralized bone/fibrin glue/mesenchymal stem cell. Bone marrow was aspirated from tibiae of five 10-week-old New Zealand White male rabbits. Right and left tibiae of each rabbit were prepared, and a 3-mm protruding implant from tibial bone was placed in each side. Particulate allogenic bone/fibrin glue/mesenchymal stem cell combination was placed around test implants and particulate bone graft/fibrin glue around controls. Two months postoperatively, the animals were euthanized, and sections were prepared for histological analysis. The mean amount of vertical bone length was higher in the experimental group than the control group (2.09 mm vs 1.03 mm; P < .05). New supracrestal trabecular bone formation was also significantly higher in the test group (28.5 ± 4.5% vs 4.3 ± 1.8%; P < .05). Mesenchymal stem cell/particulate allograft/fibrin glue appears to be a promising combination for vertical bone augmentation around simultaneously inserted implants in rabbit tibia.

Genetically modified mesenchymal stem cells induce mechanically stable posterior spine fusion

Most spine fusion procedures involve the use of prosthetic fixation devices combined with autologous bone grafts rather than biological treatment. We had shown that spine fusion could be achieved by injection of bone morphogenetic protein-2 (BMP-2)-expressing mesenchymal stem cells (MSCs) into the paraspinal muscle. In this study, we hypothesized that posterior spinal fusion achieved using genetically modified MSCs would be mechanically comparable to that realized using a mechanical fixation. BMP-2-expressing MSCs were injected bilaterally into paravertebral muscles of the mouse lumbar spine. In one control group BMP-2 expression was inhibited. Microcomputed tomography and histological analyses were used to evaluate bone formation. For comparison, a group of mouse spines were bilaterally fused with stainless steel pins. The harvested spines were later tested using a custom four-point bending apparatus and structural bending stiffness was estimated. To assess the degree to which MSC vertebral fusion was targeted and to quantify the effects of fusion on adjacent spinal segments, images of the loaded spine curvature were analyzed to extract rigidity of the individual spinal segments. Bone bridging of the targeted vertebrae was observed in the BMP-2-expressing MSC group, whereas no bone formation was noted in any control group. The biomechanical tests showed that MSC-mediated spinal fusion was as effective as stainless steel pin-based fusion and significantly more rigid than the control groups. Local analysis showed that the distribution of stiffness in the MSC-based fusion group was similar to that in the steel pin fusion group, with the majority of spinal stiffness contributed by the targeted fusion at L3-L5. Our findings demonstrate that MSC-induced spinal fusion can convey biomechanical rigidity to a targeted segment that is comparable to that achieved using an instrumental fixation.

Effect of hyperbaric oxygen on mesenchymal stem cells for lumbar fusion in vivo

Background

Hyperbaric oxygen (HBO) therapy has been proved in improving bone healing, but its effects on mesenchymal stem cells (MSCs) in vivo is not clear. The aims of this study are to clarify whether the HBO therapy has the same enhancing effect on MSCs with regard to bone formation and maturation and to ascertain whether the transplanted MSCs survive in the grafted area and contribute to new bone formation.

Methods

Twenty-three adult rabbits underwent posterolateral fusion at L4-L5 level. The animals were divided into three groups according to the material implanted and subsequent treatment: (1) Alginate carrier (n = 6); (2) Alginate-MSCs composite (n = 11); and (3) Alginate-MSCs composite with HBO therapy (n = 6). After 12 weeks, spine fusion was examined using radiographic examination, manual testing, and histological examination. Using a PKH fluorescence labeling system, whether the transplanted MSCs survived and contributed to new bone formation in the grafted area after HBO therapy was also examined.

Results

The bilateral fusion areas in each animal were evaluated independently. By radiographic examination and manual palpation, union for the Alginate, Alginate-MSCs, and Alginate-MSCs-HBO groups was 0 of 12, 10 of 22, and 6 of 12 respectively. The difference between the Alginate-MSCs and Alginate-MSCs-HBO groups was not significant (P = 0.7997). The fluorescence microscopy histological analysis indicated that the transplanted PKH67-labeled MSCs survived and partly contributed to new bone formation in the grafted area.

Conclusions

This study demonstrated that the preconditioned MSCs could survive and yield bone formation in the grafted area. HBO therapy did not enhance the osteogenic ability of MSCs and improve the success of spine fusion in the rabbit model. Although there was no significant effect of HBO therapy on MSCs for spine fusion, the study encourages us to research a more basic approach for determining the optimal oxygen tension and pressure that are required to maintain and enhance the osteogenic ability of preconditioned MSCs. Further controlled in vivo and in vitro studies are required for achieving a better understanding of the effect of HBO treatment on MSCs.

Mesenchymal stem cells expressing osteogenic and angiogenic factors synergistically enhance bone formation in a mouse model of segmental bone defect

The potential of mesenchymal stem cells (MSC) in tissue regeneration is increasingly gaining attention. There is now accumulating evidence that MSC make an important contribution to postnatal vasculogenesis. During bone development and fracture healing, vascularization is observed before bone formation. The present study determined the potential of MSC, transduced ex vivo with a recombinant adeno-associated virus 6 (rAAV6) encoding bone morphogenetic protein 2 (BMP2) and vascular endothelial growth factor (VEGF) in a mouse model of segmental bone defect created in the tibiae of athymic nude mice. Mouse MSC that were mock-transduced or transduced with rAAV6-BMP2:VEGF were systemically transplanted following radiographic confirmation of the osteotomy. Effects of the therapy were determined by enzyme-linked immunosorbent assay measurements for BMP2 and VEGF, dual-energy X-ray absorptiometry (DXA) for bone density, three-dimensional microcomputed tomography (microCT) for bone and capillary architecture, and histomorphometry for bone remodeling. Results of these analyses indicated enhanced bone formation in the group that received BMP2+VEGF-expressing MSC compared to other groups. The therapeutic effects were accompanied by increased vascularity and osteoblastogenesis, indicating its potential for effective use while treating difficult nonunion bone defects in humans.

Spinal reconstruction and bone morphogenetic proteins: open questions

Spinal fusion is a proven surgical tool for the treatment of degenerative, traumatic, neoplastic, and infectious conditions of the spine. Traditional grafting techniques using autogenous bone graft or allograft have inherent drawbacks including varying pseudoarthrosis rates and well recognized bone graft harvest site complications. Bone morphogenetic proteins (BMPs) offer the exciting prospect of enhanced union rates equal to or greater than autograft and potentially eliminate graft harvest site complications. Many studies have clearly demonstrated the efficacy of BMP products for various applications in spine surgery. BMP has proven effective in achieving union in anterior and posterior lumbar surgery and recently in anterior cervical surgery. Despite the reported success, the universal adoption of BMP is tempered by high costs and lingering safety concerns with reported complications specific to BMP use including vertebral osteolysis, ectopic bone formation, radiculitis and cervical soft tissue swelling. Ongoing clinical and basic-science research is focused on clearly defining guidelines for BMP use in spine surgery and on developing more affordable BMP formulations with dosing that predictably results in spine fusion yet minimizes the possible side effect profile.

Evaluation of Spinal Fusion Using Bone Marrow Derived Mesenchymal Stem Cells with or without Fibroblast Growth Factor-4

OBJECTIVE

In this study, the authors assessed the ability of rat bone marrow derived mesenchymal stem cells (BMDMSCs), in the presence of a growth factor, fibroblast growth factor-4 (FGF-4) and hydroxyapatite, to act as a scaffold for posterolateral spinal fusion in a rat model.

METHODS

Using a rat posterolateral spine fusion model, the experimental study comprised 3 groups. Group 1 was composed of 6 animals that were implanted with 0.08 gram hydroxyapatite only. Group 2 was composed of 6 animals that were implanted with 0.08 gram hydroxyapatite containing 1 x 10(6)/ 60 microL rat of BMDMSCs. Group 3 was composed of 6 animals that were implanted with 0.08 gram hydroxyapatite containing 1 x 10(6)/ 60 microL of rat BMDMSCs and FGF-4 1 microG to induce the bony differentiation of the BMDMSCs. Rats were assessed using radiographs obtained at 4, 6, and 8 weeks postoperatively. After sacrifice, spines were explanted and assessed by manual palpation, high-resolution microcomputerized tomography, and histological analysis.

RESULTS

Radiographic, high-resolution microcomputerized tomographic, and manual palpation revealed spinal fusion in five rats (83%) in Group 2 at 8 weeks. However, in Group 1, three (60%) rats developed fusion at L4-L5 by radiography and two (40%) by manual palpation in radiographic examination. In addition, in Group 3, bone fusion was observed in only 50% of rats by manual palpation and radiographic examination at this time.

CONCLUSION

The present study demonstrates that 0.08 gram of hydroxyapatite with 1 x 10(6)/ 60 microL rat of BMDMSCs induced bone fusion. FGF-4, added to differentiate primitive 1 x 10(6)/ 60 microL rat of BMDMSCs did not induce fusion. Based on histologic data, FGF-4 appears to induce fibrotic change rather than differentiation to bone by 1 x 10(6)/ 60 microL rat of BMDMSCs.

Delivery of recombinant bone morphogenetic proteins for bone regeneration and repair. Part B: Delivery systems for BMPs in orthopaedic and craniofacial tissue engineering

Localized and release-controlled delivery systems for the sustained expression of the biologic potency of rhBMPs are essential. A substantial number of biomaterials have been investigated thus far. Most fail after implantation or administration mainly due to either being too soft, difficult to control and/or stabilize mechanically. In the second part of this review, we review a representative selection of rhBMP-2 and rhBMP-7 carrier materials and delivery systems ranging from simple nano/microparticles to complex 3-D scaffolds in sites of orthopaedic and craniofacial bone regeneration and repair.