1
|
Wähnert D, Miersbach M, Colcuc C, Brianza S, Vordemvenne T, Plecko M, Schwarz A. Promoting bone callus formation by taking advantage of the time-dependent fracture gap strain modulation. Front Surg 2024; 11:1376441. [PMID: 38756355 PMCID: PMC11096559 DOI: 10.3389/fsurg.2024.1376441] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/25/2024] [Accepted: 04/23/2024] [Indexed: 05/18/2024] Open
Abstract
Delayed union and non-union of fractures continue to be a major problem in trauma and orthopedic surgery. These cases are challenging for the surgeon. In addition, these patients suffer from multiple surgeries, pain and disability. Furthermore, these cases are a major burden on healthcare systems. The scientific community widely agrees that the stability of fixation plays a crucial role in determining the outcome of osteosynthesis. The extent of stabilization affects factors like fracture gap strain and fluid flow, which, in turn, influence the regenerative processes positively or negatively. Nonetheless, a growing body of literature suggests that during the fracture healing process, there exists a critical time frame where intervention can stimulate the bone's return to its original form and function. This article provides a summary of existing evidence in the literature regarding the impact of different levels of fixation stability on the strain experienced by newly forming tissues. We will also discuss the timing and nature of this "window of opportunity" and explore how current knowledge is driving the development of new technologies with design enhancements rooted in mechanobiological principles.
Collapse
Affiliation(s)
- Dirk Wähnert
- Department of Trauma and Orthopedic Surgery, Protestant Hospital of Bethel Foundation, University Hospital OWL of Bielefeld University, Bielefeld, Germany
| | - Marco Miersbach
- Department of Trauma and Orthopedic Surgery, Protestant Hospital of Bethel Foundation, University Hospital OWL of Bielefeld University, Bielefeld, Germany
| | - Christian Colcuc
- Department of Trauma and Orthopedic Surgery, Protestant Hospital of Bethel Foundation, University Hospital OWL of Bielefeld University, Bielefeld, Germany
| | | | - Thomas Vordemvenne
- Department of Trauma and Orthopedic Surgery, Protestant Hospital of Bethel Foundation, University Hospital OWL of Bielefeld University, Bielefeld, Germany
| | - Michael Plecko
- Department of Orthopaedics and Traumatology, Trauma Hospital Graz (UKH), Graz, Austria
| | - Angelika Schwarz
- Department of Orthopaedics and Traumatology, Trauma Hospital Graz (UKH), Graz, Austria
| |
Collapse
|
2
|
Koguchi M, Mori Y, Kamimura M, Ito K, Tanaka H, Kurishima H, Koyama T, Mori N, Masahashi N, Aizawa T. Low Young's Modulus TiNbSn Alloy Locking Plates Accelerate Osteosynthesis in Rabbit Tibiae. TOHOKU J EXP MED 2023; 261:199-209. [PMID: 37704419 DOI: 10.1620/tjem.2023.j075] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 09/15/2023]
Abstract
A new beta TiNbSn alloy with a low Young's modulus of approximately 40 GPa has been developed to resolve the stress shielding by Young's modulus divergence. In this study, the efficacy of TiNbSn alloy locking plates on bone repair is compared to that of commercially pure titanium (CP-Ti). The TiNbSn alloy and CP-Ti, which have Young's moduli of 49.1 GPa and 107 GPa, respectively, were compared. Male Japanese white rabbits were anesthetized, and osteotomy and osteosynthesis with locking plates were performed on the right tibia. The bone repair was assessed using micro-computed tomography (CT), histomorphometry, immunohistochemistry, and mechanical testing. Micro-CT, histomorphometry, immunohistochemistry, and mechanical testing were performed four weeks after osteotomy. Six weeks after surgery, micro-CT and mechanical testing were performed. Micro-CT analysis at four weeks after surgery showed that the intramedullary fracture callus in the TiNbSn alloy group had more bone volume and numerous bridging structures compared to the CP-Ti group (CP-Ti vs. TiNbSn alloy, 34.3 ± 13.1 mm3 vs. 61.3 ± 19.6 mm3, p = 0.02; mean ± standard deviation). At four weeks post-osteotomy, the healed tibia showed significantly higher strength in the TiNbSn alloy group compared with CP-Ti (CP-Ti vs. TiNbSn alloy, 81.3 ± 31.2 N vs. 133.7 ± 46.6 N, p = 0.04). TiNbSn alloy locking plates had a more positive impact on bone formation and bone strength restoration than the CP-Ti locking plates during the early phase of bone healing.
Collapse
Affiliation(s)
- Masashi Koguchi
- Department of Orthopaedic Surgery, Tohoku University Graduate School of Medicine
| | - Yu Mori
- Department of Orthopaedic Surgery, Tohoku University Graduate School of Medicine
| | - Masayuki Kamimura
- Department of Orthopaedic Surgery, Tohoku University Graduate School of Medicine
| | - Kentaro Ito
- Department of Orthopaedic Surgery, Tohoku University Graduate School of Medicine
| | - Hidetatsu Tanaka
- Department of Orthopaedic Surgery, Tohoku University Graduate School of Medicine
| | - Hiroaki Kurishima
- Department of Orthopaedic Surgery, Tohoku University Graduate School of Medicine
| | - Tomoki Koyama
- Department of Orthopaedic Surgery, Tohoku University Graduate School of Medicine
| | - Naoko Mori
- Department of Radiology, Akita University Graduate School of Medicine
| | | | - Toshimi Aizawa
- Department of Orthopaedic Surgery, Tohoku University Graduate School of Medicine
| |
Collapse
|
3
|
Hu M, Zeng W, Zhang J, Feng Y, Ma L, Huang F, Cai Q. Fixators dynamization for delayed union and non-union of femur and tibial fractures: a review of techniques, timing and influence factors. J Orthop Surg Res 2023; 18:577. [PMID: 37550732 PMCID: PMC10405409 DOI: 10.1186/s13018-023-04054-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 05/17/2023] [Accepted: 07/27/2023] [Indexed: 08/09/2023] Open
Abstract
The optimal balance between mechanical environment and biological factors is crucial for successful bone healing, as they synergistically affect bone development. Any imbalance between these factors can lead to impaired bone healing, resulting in delayed union or non-union. To address this bone healing disorder, clinicians have adopted a technique known as "dynamization" which involves modifying the stiffness properties of the fixator. This technique facilitates the establishment of a favorable mechanical and biological environment by changing a rigid fixator to a more flexible one that promotes bone healing. However, the dynamization of fixators is selective for certain types of non-union and can result in complications or failure to heal if applied to inappropriate non-unions. This review aims to summarize the indications for dynamization, as well as introduce a novel dynamic locking plate and various techniques for dynamization of fixators (intramedullary nails, steel plates, external fixators) in femur and tibial fractures. Additionally, Factors associated with the effectiveness of dynamization are explored in response to the variation in dynamization success rates seen in clinical studies.
Collapse
Affiliation(s)
- Minhua Hu
- The First Clinical College, Guangzhou University of Chinese Medicine, Guangzhou, China
| | - Wenxing Zeng
- The First Clinical College, Guangzhou University of Chinese Medicine, Guangzhou, China
| | - Jingtao Zhang
- The First Clinical College, Guangzhou University of Chinese Medicine, Guangzhou, China
| | - Yuanlan Feng
- The First Clinical College, Guangzhou University of Chinese Medicine, Guangzhou, China
| | - Luyao Ma
- The First Clinical College, Guangzhou University of Chinese Medicine, Guangzhou, China
| | - Feng Huang
- The First Clinical College, Guangzhou University of Chinese Medicine, Guangzhou, China.
- The First Affiliated Hospital of Guangzhou University of Chinese Medicine, Guangzhou, China.
| | - Qunbin Cai
- The First Clinical College, Guangzhou University of Chinese Medicine, Guangzhou, China.
- The First Affiliated Hospital of Guangzhou University of Chinese Medicine, Guangzhou, China.
| |
Collapse
|
4
|
Meyer AP, Large TM. Early peri-implant fractures after distal femur fracture locked plating? EUROPEAN JOURNAL OF ORTHOPAEDIC SURGERY & TRAUMATOLOGY : ORTHOPEDIE TRAUMATOLOGIE 2022:10.1007/s00590-022-03398-6. [PMID: 36201033 DOI: 10.1007/s00590-022-03398-6] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/11/2022] [Accepted: 08/28/2022] [Indexed: 06/16/2023]
Abstract
PURPOSE To report the peri-implant fracture rates after locked plating of distal femur fractures and examine risk factors. METHODS Over a 7 year period, 89 AO/OTA 33A/C distal femur fractures were identified and reviewed. After excluding treatment with intramedullary nails, age under 50, those with the proximal femur protected, or those without 6 months of follow-up, 42 distal femur fractures in 41 patients, mean age 72.3 were studied. All were treated with lateral locked plating of distal femur fractures. The details of the constructs were recorded. Mean follow-up was 562 days (18.7 months). RESULTS 3/42 were open injuries, 9/42 were type C, 16/42 were type A, and 17 were periprosthetic above a knee arthroplasty. Two patients were treated with a dynamic plating construct using all far-cortical locking (FCL) screws in the diaphysis. 40 patients were treated with a variety of non-dynamic diaphyseal constructs including locking, non-locking, and four with 1-2 FCL screws distally. There was one asymptomatic nonunion. 2/2 patients in the dynamically plated group experienced a peri-implant fracture versus 1/40 in the non-dynamically plated group (p = 0.001). 3/9 with an all-locked construct versus 0/25 patients with a most proximal non-locking screw experienced a fracture. CONCLUSIONS The overall peri-implant fracture risk was 7.1% (3/42), 3/17 patients with a locking screw most proximal experienced a peri-implant fracture, 3/9 with an all-locking construct, and 2/2 patients with a dynamic construct experienced a fracture. These findings merit additional clinical and biomechanical study.
Collapse
Affiliation(s)
- Anna P Meyer
- Emory University Department of Orthopedic Surgery, Grady Memorial Hospital, Atlanta, GA, 30301, USA
| | - Thomas M Large
- Emory University Department of Orthopedic Surgery, Grady Memorial Hospital, Atlanta, GA, 30301, USA.
- Mission Hospital, Orthopedic Trauma Services, Asheville, NC, USA.
| |
Collapse
|
5
|
Hu J, Peng Y, Li J, Li M, Xiong Y, Xiao J, Zhang L, Tang P. Spatial Bridge Locking Fixator versus Traditional Locking Plates in Treating AO/OTA 32-A3.2 Fracture: Finite Element Analysis and Biomechanical Evaluation. Orthop Surg 2022; 14:1638-1648. [PMID: 35733286 PMCID: PMC9363740 DOI: 10.1111/os.13308] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 03/02/2022] [Revised: 04/16/2022] [Accepted: 04/16/2022] [Indexed: 11/28/2022] Open
Abstract
Objective To compare the biomechanical behaviors of the spatial bridge locking fixator (SBLF), single locking plate (SP), and double locking plate (DP) for AO/OTA 32‐A3.2 fractures using finite element analysis and biomechanical tests. Methods Axial loading of 700 N was conducted on the AO/OTA 32‐A3.2 model via finite element analysis. The von Mises stress and the interfragmentary movement (IFM) were comparatively analyzed in the three configurations above. On the mechanical tester, axial and torsional loading of 30 synthetic femurs (five specimens of each configuration for each test at random) was performed, and the interfragmentary movement, torsion angle, stiffness, and ultimate load were recorded and analyzed. Results The finite element analysis (FEA) results showed that the von Mises stress of the spatial bridge locking fixator (SBLF) was lower than that of the single locking plate (SP) and higher than that of the double locking plate (DP). At 700 N, the axial IFMs were 0.15–0.38 mm (SBLF), 0.03–0.84 mm (SP), and 0.02–0.07 mm (DP). The biomechanical experiment indicated that the axial interfragmentary movements (IFMs) were 0.44 ± 0.23 mm (SBLF), 1.02 ± 0.40 mm (SP), and 0.07 ± 0.07 mm (DP) (p < 0.001). The axial IFM of the SBLF group had the highest probability (79.26%) of falling within the ideal range (0.2–0.8 mm), and the SP and DP groups had probabilities of 27.10% and 3.14%, respectively. The axial stiffness in the SBLF group (1586 ± 130 N/mm) was significantly lower than that in the DP group (10,264 ± 2671 N/mm) (p < 0.001) but greater than that in the SP group (725 ± 178 N/mm) (p = 0.396). The range of axial loads to ultimate failure was 3385–4527 N (SBLF), 3377–4664 N (SP), and 3780–4804 N (DP). The shear motion of the fracture end was 0.35 ± 0.14 mm (SBLF), 0.16 ± 0.10 mm (SP), and 0.08 ± 0.04 mm (DP) (p < 0.001). The torsional stiffness was 1.68 ± 0.14 Nm/degree (SBLF), 2.32 ± 0.29 Nm/degree (SP) (SBLF&SP, p < 0.001), and 3.53 ± 0.73 Nm/degree (DP) (SBLF&DP, p < 0.001). Conclusions The SBLF structure may exhibit a better biomechanical performance compared with the SP and DP in providing the best quantity and more symmetrical interfragmentary movement for AO/OTA 32‐A3.2 fractures.
Collapse
Affiliation(s)
- Jianwei Hu
- Department of Orthopaedics, First Medical Center, Chinese PLA General Hospital, National Clinical Research Center for Orthopedics, Sports Medicine & Rehabilitation, Beijing, China.,Department of Orthopaedics, Tangshan Gongren Hospital, Tangshan, China
| | - Ye Peng
- Department of Orthopaedics, First Medical Center, Chinese PLA General Hospital, National Clinical Research Center for Orthopedics, Sports Medicine & Rehabilitation, Beijing, China
| | - Jiantao Li
- Department of Orthopaedics, First Medical Center, Chinese PLA General Hospital, National Clinical Research Center for Orthopedics, Sports Medicine & Rehabilitation, Beijing, China
| | - Ming Li
- Department of Orthopaedics, First Medical Center, Chinese PLA General Hospital, National Clinical Research Center for Orthopedics, Sports Medicine & Rehabilitation, Beijing, China
| | - Ying Xiong
- Department of Orthopaedics, Yan'an Hospital Affiliated to Kunming Medical University, Kunming, China
| | - Jiayu Xiao
- Department of Orthopaedics, Yan'an Hospital Affiliated to Kunming Medical University, Kunming, China
| | - Licheng Zhang
- Department of Orthopaedics, First Medical Center, Chinese PLA General Hospital, National Clinical Research Center for Orthopedics, Sports Medicine & Rehabilitation, Beijing, China
| | - Peifu Tang
- Department of Orthopaedics, First Medical Center, Chinese PLA General Hospital, National Clinical Research Center for Orthopedics, Sports Medicine & Rehabilitation, Beijing, China
| |
Collapse
|
6
|
Djuricic A, Gee A, Schemitsch EH, Quenneville CE, Zdero R. Biomechanical design of a new percutaneous locked plate for comminuted proximal tibia fractures. Med Eng Phys 2022; 104:103801. [DOI: 10.1016/j.medengphy.2022.103801] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/01/2021] [Revised: 03/14/2022] [Accepted: 04/12/2022] [Indexed: 11/25/2022]
|
7
|
Siqueira RC, Rahal SC, Mesquita LR, Voorwald FA, Fernandes MF, Tosati M, Ribeiro CR, Scorsato PS. Influence of the Near-Cortical Over-Drilling Technique on the Mechanical Behaviour of Locking Plate Constructs Applied in Maned Wolf's Femur. Vet Comp Orthop Traumatol 2022; 35:246-254. [PMID: 35609873 DOI: 10.1055/s-0042-1748859] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
Abstract
OBJECTIVE The aim of this study was to evaluate the influence of near-cortical over-drilling holes on the mechanical behaviour of locking plate constructs applied in maned wolf's femur by using mechanical testing and finite element method (FEM). STUDY DESIGN Seven pairs of adult maned wolves (Chrysocyon brachyurus) femur bones were randomly distributed into four groups. In all groups, a 3.5 mm locking compression plate, designed with 12 combi-holes and one locked, was applied to the lateral surface of the femur. G1 (n = 4) received bicortical locking screws placed in holes 1, 3, 5, 8, 10 and 12. In G2 (n = 5), the plate was applied as used in G1, but the application of the locked screws involved the near-cortical over-drilling technique. In G3 (n = 4), the plate was applied as used in G2, but the size of the near-cortical over-drilling was larger. The combi-holes 6 and 7 were maintained over a 10 mm fracture gap without screws. All constructs were tested for failure in the axial load. The axial load was applied eccentrically to the femoral head. RESULTS Statistical differences were observed in the maximum load with G3 > G1 and G3 > G2, and in the deflection with G2 > G1 and G2 > G3. The FEM showed the lowest total displacement of the bone-plate constructs as well as of the plate in G1 compared with G2 and G3. CONCLUSION The near-cortical over-drilling technique used in unstable fractures induced in the maned wolf's femur showed by static axial compression test that maximum load and deflection are dependent on drill hole size induced in the near-cortex. Based on FEM, the lowest total displacement of the bone-plate constructs was observed in Group 1.
Collapse
Affiliation(s)
- Rafael C Siqueira
- Department of Veterinary Surgery and Anesthesiology, School of Veterinary Medicine and Animal Science - São Paulo State University (UNESP), Rubião Júnior s/n, Botucatu, SP, Brazil
| | - Sheila C Rahal
- Department of Veterinary Surgery and Anesthesiology, School of Veterinary Medicine and Animal Science - São Paulo State University (UNESP), Rubião Júnior s/n, Botucatu, SP, Brazil
| | - Luciana R Mesquita
- Department of Veterinary Surgery and Anesthesiology, School of Veterinary Medicine and Animal Science - São Paulo State University (UNESP), Rubião Júnior s/n, Botucatu, SP, Brazil
| | - Fabiana A Voorwald
- Department of Veterinary Surgery, Federal University of Viçosa, MG, Brazil
| | - Martin F Fernandes
- Department of Materials and Technology, São Paulo State University (UNESP), Guaratinguetá, São Paulo, Brazil
| | - Marcos Tosati
- Solution Engineering Manager at SAMT - Structural Solutions for Finite Elements, Bauru, Brazil
| | - Celso R Ribeiro
- Mechanical and Metallography Testing Laboratory - LEMM, Jaú, SP, Rua Luiz Pengo 150, Brazil
| | - Paulo S Scorsato
- Department of Veterinary Surgery and Anesthesiology, School of Veterinary Medicine and Animal Science, University of Marília (UNIMAR), Marília, SP, Brazil
| |
Collapse
|
8
|
Kabiri A, Liaghat G, Alavi F, Ansari M, Hedayati SK. A comparative study of 3D printing and heat-compressing methods for manufacturing the thermoplastic composite bone fixation plate: Design, characterization, and in vitro biomechanical experimentation. Proc Inst Mech Eng H 2021; 235:1439-1452. [PMID: 34304634 DOI: 10.1177/09544119211034353] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
Abstract
Metallic bone fixations, due to their high rigidity, can cause long-term complications. To alleviate metallic biomaterials' drawbacks, in this research new Glass Fiber/Polypropylene (GF/PP) composite internal fixations were developed, and an investigation of their mechanical behavior was performed through in vitro biomechanical experiments. Short randomly oriented, long unidirectional prepreg, and long unidirectional fiber yarn were considered as reinforcements, and the effects on their mechanical properties of different manufacturing processes, that is, 3D printing and heat-compressing, were investigated. The constructed fixation plates were tested in the transversely fractured diaphysis of bovine tibia under axial compression loading. The overall stiffness and the Von Mises strain field of the fixation plates were obtained within stable and unstable fracture conditions. The samples were loaded until failure to determine their failure loads, strains, and mechanisms. Based on the results, the GF/PP composite fixation plates can provide adequate interfragmentary movement to amplify bone ossification, so they can provide proper support for bone healing. Moreover, their potential for stress shielding reduction and their load-bearing capacity suggest their merits in replacing traditional metallic plates.
Collapse
Affiliation(s)
- Ali Kabiri
- Faculty of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran
| | - Gholamhossein Liaghat
- Faculty of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran.,School of Mechanical & Aerospace Engineering, Kingston University, London, UK
| | - Fatemeh Alavi
- Faculty of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran
| | - Mehdi Ansari
- Department of Mechanical Engineering, Arak University of Technology, Arak, Iran
| | | |
Collapse
|
9
|
Kabiri A, Liaghat G, Alavi F. Biomechanical evaluation of glass fiber/polypropylene composite bone fracture fixation plates: Experimental and numerical analysis. Comput Biol Med 2021; 132:104303. [PMID: 33676315 DOI: 10.1016/j.compbiomed.2021.104303] [Citation(s) in RCA: 9] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/13/2020] [Revised: 02/25/2021] [Accepted: 02/25/2021] [Indexed: 12/14/2022]
Abstract
Little is known about the impact behavior of composite fixation plate used in the fracture healing of long bones diaphysis. Hence, this study examined polypropylene composite fixation plates using different glass fibers and measured their biomechanical responses under axial impact loading experimentally and numerically. Short randomly oriented, long unidirectional prepregs and fiber yarn of glass were considered as reinforcements, and fixation plates were fabricated through two different heat-compressing and 3D printing processes. Furthermore, assessing the fixation plate structures impact behavior was carried out using in vitro impact test and finite element analysis (FEA). Impact damping behavior, damage mechanisms, and stress and strain pattern of the composite fixation plate structures were obtained under various bone fractures and impact energies. The impact load-time responses and the failure mechanisms demonstrated that fixation plate structures with more plastic behavior and lower stiffness could act as an initial shock absorber and dampen the transmission of axial impact load by distributing the impact energy over time. Therefore, considering the ability of stress shielding and adequate interfragmentary movement which amplifies bone ossification, the proposed Glass Fiber/PP (GF/PP) composite fixation plates could serve as a proper alternative in orthopedics.
Collapse
Affiliation(s)
- Ali Kabiri
- Faculty of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran
| | - Gholamhossein Liaghat
- Faculty of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran; School of Mechanical & Aerospace Engineering, Kingston University, London, UK.
| | - Fatemeh Alavi
- Faculty of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran
| |
Collapse
|
10
|
Sarwar A, Gee A, Bougherara H, Kuzyk PRT, Schemitsch EH, Zdero R. Biomechanical optimization of the far cortical locking technique for early healing of distal femur fractures. Med Eng Phys 2021; 89:63-72. [PMID: 33608126 DOI: 10.1016/j.medengphy.2021.02.003] [Citation(s) in RCA: 10] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/10/2020] [Revised: 01/22/2021] [Accepted: 02/03/2021] [Indexed: 10/22/2022]
Abstract
This finite element study optimized far cortical locking (FCL) technology for early callus formation in distal femur fracture fixation with a 9-hole plate using FCL screws proximal to, and standard locking screws distal to, the fracture. Analyses were done for 120 possible FCL screw configurations by varying FCL screw distribution and number. A hip joint force of 700 N (i.e. 100% x body weight) was used, which corresponds to a typical 140 N "toe-touch" foot-to-ground force (i.e. 20% x body weight) suggested to patients immediately after surgery. Increased FCL screw distribution (i.e. shorter plate working length) caused a decrease at the medial side and an increase at the lateral side of the axial interfragmentary motion (AIM), mildly affected shaft and condylar cortex Von Mises max stress (σMAX), increased plate σMAX, and decreased shaft FCL screw and condylar locking screw σMAX. Increased FCL screw number decreased AIM and σMAX on the shaft cortex, condylar cortex, plate, and FCL screws, but not condylar screws. The optimal FCL screw configuration had 3 FCL screws in plate holes #1, 5, and 6 (proximal to distal) for optimal AIM of 0.2 - 1 mm and reduce shear fracture motion, thereby encouraging early callus formation.
Collapse
Affiliation(s)
- Ahmed Sarwar
- Department of Mechanical and Industrial Engineering, Ryerson University, Toronto, ON, Canada
| | - Aaron Gee
- Orthopaedic Biomechanics Lab, Victoria Hospital, (Room A6-144), 800 Commissioners Road, London, ON N6A-5W9, Canada
| | - Habiba Bougherara
- Department of Mechanical and Industrial Engineering, Ryerson University, Toronto, ON, Canada
| | - Paul R T Kuzyk
- Department of Surgery, University of Toronto, Toronto, ON, Canada
| | - Emil H Schemitsch
- Orthopaedic Biomechanics Lab, Victoria Hospital, (Room A6-144), 800 Commissioners Road, London, ON N6A-5W9, Canada; Department of Surgery, Western University, London, ON, Canada
| | - Radovan Zdero
- Department of Mechanical and Industrial Engineering, Ryerson University, Toronto, ON, Canada; Orthopaedic Biomechanics Lab, Victoria Hospital, (Room A6-144), 800 Commissioners Road, London, ON N6A-5W9, Canada; Department of Surgery, Western University, London, ON, Canada; Department of Mechanical and Materials Engineering, Western University, London, ON, Canada.
| |
Collapse
|
11
|
Han Z, Wu J, Deng G, Bi C, Wang J, Wang Q. Axial Micromotion Locking Plate Construct Can Promote Faster and Stronger Bone Healing in an Ovine Osteotomy Model. Front Bioeng Biotechnol 2021; 8:593448. [PMID: 33520953 PMCID: PMC7845656 DOI: 10.3389/fbioe.2020.593448] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/27/2020] [Accepted: 12/04/2020] [Indexed: 11/13/2022] Open
Abstract
Fixing bone fractures with controlled axial interfragmentary micromotion improves bone healing; however, the optimal type of implant construct for this purpose is still lacking. The present study describes a novel axial micromotion locking plate (AMLP) construct that allows axial interfragmentary micromotion of 0.3 or 0.6 mm. We investigated whether the AMLP constructs enhance bone healing compared to an ordinary locking plate (LP) using an ovine osteotomy model. The stiffness of the constructs was tested under axial loading. We created a 3-mm osteotomy in the left hind leg tibia of sheep that was then stabilized with a 0.3- or 0.6-mm AMLP or LP construct (n = 6/group). Bone healing was monitored weekly by X-ray radiography starting from week 3 after surgery. At week 9, the specimens were collected and evaluated by computed tomography and torsional testing. We found that the AMLPs had a lower stiffness than the LP; in particular, the stiffness of the 0.6-mm AMLP construct was 86 and 41% lower than that of the LP construct for axial loads <200 and >200 N, respectively. In the in vivo experiments, tibial osteotomies treated with the 0.6-mm AMLP construct showed the earliest maximum callus formation (week 5) and the highest volume of bone callus (9.395 ± 1.561 cm3 at week 9). Specimens from this group also withstood a 27% greater torque until failure than those from the LP group (P = 0.0386), with 53% more energy required to induce failure (P = 0.0474). These results demonstrate that AMLP constructs promote faster and stronger bone healing than an overly rigid LP construct. Moreover, better bone healing was achieved with an axial micromotion of 0.6 mm as compared to 0.3 mm.
Collapse
Affiliation(s)
- Zhihua Han
- Trauma Center, Department of Orthopaedics and Traumatology, Shanghai General Hospital, Shanghai Jiaotong University, Shanghai, China.,Sino-Euro Orthopaedics Network, Homburg, Germany
| | - Jianhong Wu
- Trauma Center, Department of Orthopaedics and Traumatology, Shanghai General Hospital, Shanghai Jiaotong University, Shanghai, China
| | - Guoying Deng
- Trauma Center, Department of Orthopaedics and Traumatology, Shanghai General Hospital, Shanghai Jiaotong University, Shanghai, China
| | - Chun Bi
- Trauma Center, Department of Orthopaedics and Traumatology, Shanghai General Hospital, Shanghai Jiaotong University, Shanghai, China
| | - Jiandong Wang
- Trauma Center, Department of Orthopaedics and Traumatology, Shanghai General Hospital, Shanghai Jiaotong University, Shanghai, China
| | - Qiugen Wang
- Trauma Center, Department of Orthopaedics and Traumatology, Shanghai General Hospital, Shanghai Jiaotong University, Shanghai, China
| |
Collapse
|
12
|
Gee A, Bougherara H, Schemitsch EH, Zdero R. Biomechanical design using in-vitro finite element modeling of distal femur fracture plates made from semi-rigid materials versus traditional metals for post-operative toe-touch weight-bearing. Med Eng Phys 2020; 87:95-103. [PMID: 33461680 DOI: 10.1016/j.medengphy.2020.11.015] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/27/2020] [Revised: 11/23/2020] [Accepted: 11/29/2020] [Indexed: 01/19/2023]
Abstract
This proof-of-concept study designs distal femur fracture plates from semi-rigid materials vs. traditional metals for toe-touch weight-bearing recommended to patients immediately after surgery. The two-fold goal was to (a) reduce stress shielding (SS) by increasing cortical bone stress thereby reducing the risk of bone absorption and plate loosening, and (b) reduce delayed healing (DH) via early callus formation by optimizing axial interfragmentary motion (AIM). Finite element analysis was used to design semi-rigid plates whose elastic moduli E ensured plates permitted AIM of 0.2 - 1 mm for early callus formation. A low hip joint force of 700 N (i.e. 100% x body weight) was applied, which corresponds to a typical 140 N toe-touch foot-to-ground force (i.e. 20% x body weight) recommended to patients after surgery. Analysis was done using 2 screw materials (steel or titanium) and types (locked or non-locked). Steel and titanium plates were also analyzed. Semi-rigid plates (vs. metal plates) had lower overall femur/plate construct stiffnesses of 508 - 1482 N/mm, higher cortical bone stresses under the plate by 2.02x - 3.27x thereby reducing SS, and lower E values of 414 - 2302 MPa to permit AIM of 0.2 - 1 mm thereby reducing DH.
Collapse
Affiliation(s)
- Aaron Gee
- Orthopaedic Biomechanics Lab, Room A6-144, Victoria Hospital, 800 Commissioners Road, London N6A5W9, Canada.
| | - Habiba Bougherara
- Department of Mechanical and Industrial Engineering, Ryerson University, Toronto, Canada.
| | - Emil H Schemitsch
- Orthopaedic Biomechanics Lab, Room A6-144, Victoria Hospital, 800 Commissioners Road, London N6A5W9, Canada; Department of Surgery (Division of Orthopaedic Surgery), Western University, London, Canada.
| | - Radovan Zdero
- Orthopaedic Biomechanics Lab, Room A6-144, Victoria Hospital, 800 Commissioners Road, London N6A5W9, Canada; Department of Mechanical and Industrial Engineering, Ryerson University, Toronto, Canada; Department of Surgery (Division of Orthopaedic Surgery), Western University, London, Canada; Department of Mechanical and Materials Engineering, Western University, London, Canada.
| |
Collapse
|
13
|
Schultz BJ, Koval K, Salehi PP, Gardner MJ, Cerynik DL. Controversies in Fracture Healing: Early Versus Late Dynamization. Orthopedics 2020; 43:e125-e133. [PMID: 32077970 DOI: 10.3928/01477447-20200213-08] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 10/19/2018] [Accepted: 02/11/2019] [Indexed: 02/03/2023]
Abstract
Dynamization of fracture fixation constructs provides early rigidity for primary bone healing and late motion for secondary healing. A review of laboratory, animal, and clinical studies investigating the impact, and optimal timing, of dynamization is limited by lack of standardization across studies. However, in animal models, dynamization improves histologic and biomechanical properties compared with statically rigid or flexible controls. In animals, dynamization at 3 to 4 weeks showed improved histologic results. In clinical studies, it showed faster, stronger, and stiffer bone healing. Clinical success dynamizing external fixators and intramedullary nails suggests a role for late dynamization in other fixation types, such as bridge plating. [Orthopedics. 2020;43(3):e125-e133.].
Collapse
|
14
|
Far Cortical Locking Fixation of Distal Femur Fractures is Dominated by Shear at Clinically Relevant Bridge Spans. J Orthop Trauma 2019; 33:92-96. [PMID: 30299380 DOI: 10.1097/bot.0000000000001341] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 02/02/2023]
Abstract
OBJECTIVES Far cortical locking (FCL) constructs have been shown to increase axial interfragmentary displacement while limiting shear and have been specifically recommended in the treatment of distal femur fractures. However, there is no available data regarding their mechanical behavior within the range of bridge spans typically used for comminuted distal femur fractures. This biomechanical study of distal femur locked plate fixation assessed 4 methods of diaphyseal fixation for associated axial and shear displacement at bridge spans typically used in clinical practice. METHODS Distal femur locking plates were used to bridge simulated fractures in femur surrogates with 4 different methods of diaphyseal fixation (bicortical locking, bicortical nonlocking, near cortical locking, and FCL). Axial and shear displacement were assessed at 5 different bridge spans for each fixation method. RESULTS Diaphyseal fixation type was associated with the amount of shear (P = 0.04), but not the amount of axial displacement (P = 0.39). Specifically, FCL constructs demonstrated greater shear than bicortical locking (median 4.57 vs. 2.94 mm, P = 0.02) and bicortical nonlocking (median 4.57 vs. 3.41 mm, P = 0.02) constructs. CONCLUSIONS Unexpectedly, FCL constructs demonstrated greater shear than bicortical locking and nonlocking constructs and similar axial displacement for all fixation methods. Bridge span had a dominant effect on displacement that interacted negatively with more flexible FCL diaphyseal fixation. Potentially interactive construct features are best studied in concert. Given the complexity of these relationships, computational modeling will likely play an integral role in future mechanotransduction research.
Collapse
|
15
|
Abstract
Internal fixation of bone fractures by plate osteosynthesis has continuously evolved for more than 100 years. The aim of internal fracture fixation has always been to restore the functional capacity of the broken bone. The principal requirements of operative fracture management, those being anatomical fracture reduction, durable fixation, preservation of biology, promotion of fracture healing and early patient mobilization, have always been crucial but were accomplished to different extents depending on the focus of the specific fracture fixation principle employed. The first successful approach for internal fracture fixation was anatomic open reduction and interfragmentary compression. This secured the fracture fragments, maintained alignment and enabled direct healing of the fracture fragments. However, the highly invasive approach inflicted an immense amount of biologic stress to the area surrounding the fracture site. Modern preferably anatomically pre-contoured locking plates with relative stability of the bone-implant construct enable durable fixation while allowing a less invasive approach that preserves the biology at the fracture site. In contrast to conventional plating, locked plating provides a certain amount of flexibility, which is required to induce the formation of periosteal callus through interfragmentary motion. Most recently the concept of dynamic plating was introduced, which aims to induce more controlled interfragmentary motion and active stimulation of periosteal callus formation. This review article describes the historic development of plating from conventional plating to locked and dynamic plating.
Collapse
Affiliation(s)
- Peter Augat
- Institute of Biomechanics, BG Trauma Center Murnau, Germany; Institute of Biomechanics, Paracelsus Medical University, Salzburg, Austria.
| | - Christian von Rüden
- Institute of Biomechanics, BG Trauma Center Murnau, Germany; Institute of Biomechanics, Paracelsus Medical University, Salzburg, Austria; Department of Trauma Surgery, BG Trauma Center Murnau, Germany
| |
Collapse
|
16
|
A Retrospective Study of Thoracolumbar Fractures Treated with Fixation and Nonfusion Surgery of Intravertebral Bone Graft Assisted with Balloon Kyphoplasty. World Neurosurg 2017; 108:798-806. [DOI: 10.1016/j.wneu.2017.08.093] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/18/2017] [Revised: 08/13/2017] [Accepted: 08/14/2017] [Indexed: 11/23/2022]
|
17
|
Abstract
BACKGROUND Decreasing the stiffness of locked plating constructs can promote natural fracture healing by controlled dynamization of the fracture. This biomechanical study compared the effect of 4 different stiffness reduction methods on interfragmentary motion by measuring axial motion and shear motion at the fracture site. METHODS Distal femur locking plates were applied to bridge a metadiaphyseal fracture in femur surrogates. A locked construct with a short-bridge span served as the nondynamized control group (LOCKED). Four different methods for stiffness reduction were evaluated: replacing diaphyseal locking screws with nonlocked screws (NONLOCKED); bridge dynamization (BRIDGE) with 2 empty screw holes proximal to the fracture; screw dynamization with far cortical locking (FCL) screws; and plate dynamization with active locking plates (ACTIVE). Construct stiffness, axial motion, and shear motion at the fracture site were measured to characterize each dynamization methods. RESULTS Compared with LOCKED control constructs, NONLOCKED constructs had a similar stiffness (P = 0.08), axial motion (P = 0.07), and shear motion (P = 0.97). BRIDGE constructs reduced stiffness by 45% compared with LOCKED constructs (P < 0.001), but interfragmentary motion was dominated by shear. Compared with LOCKED constructs, FCL and ACTIVE constructs reduced stiffness by 62% (P < 0.001) and 75% (P < 0.001), respectively, and significantly increased axial motion, but not shear motion. CONCLUSIONS In a surrogate model of a distal femur fracture, replacing locked with nonlocked diaphyseal screws does not significantly decrease construct stiffness and does not enhance interfragmentary motion. A longer bridge span primarily increases shear motion, not axial motion. The use of FCL screws or active plating delivers axial dynamization without introducing shear motion.
Collapse
|
18
|
Shaat M. Reporting the Fatigue Life of 316L Stainless Steel Locking Compression Plate Implants: The Role of the Femoral and Tibial Biomechanics During the Gait. J Biomech Eng 2017; 139:2648718. [DOI: 10.1115/1.4037561] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/25/2017] [Indexed: 01/02/2023]
Abstract
In this study, the fatigue characteristics of femoral and tibial locking compression plate (LCP) implants are determined accounting for the knee biomechanics during the gait. A biomechanical model for the kinematics and kinetics of the knee joint during the complete gait cycle is proposed. The rotations of the femur, tibia, and patella about the knee joint during the gait are determined. Moreover, the patellar-tendon force (PT), quadriceps-tendon force (QT), the tibiofemoral joint force (TFJ), and the patellofemoral joint force (PFJ) through the standard gait cycle are obtained as functions of the body weight (BW). On the basis of the derived biomechanics of the knee joint, the fatigue factors of safety along with the fatigue life of 316L stainless steel femoral and tibial LCP implants are reported as functions of the BW and bone fracture location, for the first time. The reported results reveal that 316L stainless steel LCP implants for femoral surgeries are preferred for conditions in which the bone fracture is close to the knee joint and the BW is less than 80 kg. For tibial surgeries, 316L stainless steel LCP implants can be used for conditions in which the bone fracture is close to the knee joint and the BW is less than 100 kg. This study presents a critical guide for the determination of the fatigue characteristics of LCP implants. The obtained results reveal that the fatigue analyses should be performed on the basis of the body biomechanics to guarantee accurate designs of LCP implants for femoral and tibial orthopedic surgeries.
Collapse
Affiliation(s)
- Mohamed Shaat
- Department of Mechanical and Aerospace Engineering, New Mexico State University, Las Cruces, NM 88003 e-mails:
| |
Collapse
|
19
|
Abstract
OBJECTIVES Active plates dynamize a fracture by elastic suspension of screw holes within the plate. We hypothesized that dynamic stabilization with active plates delivers stronger healing relative to standard compression plating. METHODS Twelve sheep were randomized to receive either a standard compression plate (CP) or an active plate (ACTIVE) for stabilization of an anatomically reduced tibial osteotomy. In the CP group, absolute stabilization was pursued by interfragmentary compression with 6 cortical screws. In the ACTIVE group, dynamic stabilization after bony apposition was achieved with 6 elastically suspended locking screws. Fracture healing was analyzed weekly on radiographs. After sacrifice 9 weeks postsurgery, the torsional strength of healed tibiae and contralateral tibiae was measured. Finally, computed tomography was used to assess fracture patterns and healing modes. RESULTS Healing in both groups included periosteal callus formation. ACTIVE specimens had almost 6 times more callus area by week 9 (P < 0.001) than CP specimens. ACTIVE specimens recovered on average 64% of their native strength by week 9, and were over twice as strong as CP specimens, which recovered 24% of their native strength (P = 0.008). Microcomputed tomography demonstrated that compression plating induced a combination of primary bone healing and gap healing. Active plating consistently stimulated biological bone healing by periosteal callus formation. CONCLUSIONS Compared with compression plating, dynamic stabilization of simple fractures with active plates delivers significantly stronger healing.
Collapse
|
20
|
Bottlang M, Tsai S, Bliven EK, von Rechenberg B, Klein K, Augat P, Henschel J, Fitzpatrick DC, Madey SM. Dynamic Stabilization with Active Locking Plates Delivers Faster, Stronger, and More Symmetric Fracture-Healing. J Bone Joint Surg Am 2016; 98:466-74. [PMID: 26984914 PMCID: PMC4788849 DOI: 10.2106/jbjs.o.00705] [Citation(s) in RCA: 36] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 02/01/2023]
Abstract
BACKGROUND Axial dynamization of fractures can promote healing, and overly stiff fixation can suppress healing. A novel technology, termed active plating, provides controlled axial dynamization by the elastic suspension of locking holes within the plate. This prospective, controlled animal study evaluated the effect of active plates on fracture-healing in an established ovine osteotomy model. We hypothesized that symmetric axial dynamization with active plates stimulates circumferential callus and delivers faster and stronger healing relative to standard locking plates. METHODS Twelve sheep were randomly assigned to receive a standard locking plate or an active locking plate for stabilization of a 3-mm tibial osteotomy gap. The only difference between plates was that locking holes of active plates were elastically suspended, allowing up to 1.5 mm of axial motion at the fracture. Fracture-healing was analyzed weekly on radiographs. After sacrifice at nine weeks postoperatively, callus volume and distribution were assessed by computed tomography. Finally, to determine their strength, healed tibiae and contralateral tibiae were tested in torsion until failure. RESULTS At each follow-up, the active locking plate group had more callus (p < 0.001) than the standard locking plate group. At postoperative week 6, all active locking plate group specimens had bridging callus at the three visible cortices. In standard locking plate group specimens, only 50% of these cortices had bridged. Computed tomography demonstrated that all active locking plate group specimens and one of the six standard locking plate group specimens had developed circumferential callus. Torsion tests after plate removal demonstrated that active locking plate group specimens recovered 81% of their native strength and were 399% stronger than standard locking plate group specimens (p < 0.001), which had recovered only 17% of their native strength. All active locking plate group specimens failed by spiral fracture outside the callus zone, but standard locking plate group specimens fractured through the osteotomy gap. CONCLUSIONS Symmetric axial dynamization with active locking plates stimulates circumferential callus and yields faster and stronger healing than standard locking plates. CLINICAL RELEVANCE The stimulatory effect of controlled motion on fracture-healing by active locking plates has the potential to reduce healing complications and to shorten the time to return to function.
Collapse
Affiliation(s)
- Michael Bottlang
- Portland Biomechanics Laboratory, Legacy Research Institute, Portland, Oregon,E-mail address for M. Bottlang:
| | - Stanley Tsai
- Portland Biomechanics Laboratory, Legacy Research Institute, Portland, Oregon
| | - Emily K. Bliven
- Portland Biomechanics Laboratory, Legacy Research Institute, Portland, Oregon
| | | | - Karina Klein
- Musculoskeletal Research Unit, Vetsuisse Faculty, University of Zürich, Zürich, Switzerland
| | - Peter Augat
- Institute of Biomechanics, Paracelsus Medical University, Salzburg, Austria
| | - Julia Henschel
- Institute of Biomechanics, Trauma Center Murnau, Murnau, Germany
| | | | - Steven M. Madey
- Portland Biomechanics Laboratory, Legacy Research Institute, Portland, Oregon
| |
Collapse
|
21
|
Abstract
Application of the correct fixation construct is critical for fracture healing and long-term stability; however, it is a complex issue with numerous significant factors. This review describes a number of common fracture types and evaluates their currently available fracture fixation constructs. In the setting of complex elbow instability, stable fixation or radial head replacement with an appropriately sized implant in conjunction with ligamentous repair is required to restore stability. For unstable sacral fractures with vertical or multiplanar instabilities, "standard" iliosacral screw fixation is not sufficient. Periprosthetic femur fractures, in particular Vancouver B1 fractures, have increased stability when using 90/90 fixation versus a single locking plate. Far cortical locking combines the concept of dynamization with locked plating to achieve superior healing of a distal femur fracture. Finally, there is no ideal construct for syndesmotic fracture stabilization; however, these fractures should be fixed using a device that allows for sufficient motion in the syndesmosis. In general, orthopaedic surgeons should select a fracture fixation construct that restores stability and promotes healing at the fracture site, while reducing the potential for fixation failure.
Collapse
|