Multi-Axis Fatigue Experimentation System of Intramedullary Implants for Femur and Tibia

Mechanical comparison of standard interlocking, clawed, and expandable wedge locked nail fixations: An experimental and numerical study

INTRODUCTION

Intramedullary nailing has been used as a standard in the treatment of the long bone fractures with its clinical and mechanical advantages. However, using distal locking screws has been associated with longer operative times, higher radiation exposure rates, and complications like breakages of distal screw or nail at the screw hole level. Therefore, attempts to eliminate distal locking screws has been always present for intramedullary nail fixation. With a similar purpose, the present study has been carried out to compare mechanical behaviors of intramedullary nail fixations with different distal locking elements.

MATERIALS AND METHODS

In this study, mechanical behaviors of standard interlocking and clawed nail fixations were compared experimentally in the first part. Six fourth generation Sawbones femurs, which have a simulated subtrochanteric fracture, were divided equally and were fixed with standard interlocking and clawed nails. During axial compression tests, experimental strain measurements were taken from all fixations. After validation of numerical models with using experimental strains and stiffnesses, mechanical behaviors of standard interlocking, clawed, and wedge locked nail fixations were compared numerically under axial compression loads. In numerical comparison, the stress-strain distributions were evaluated.

RESULTS

Experimental results showed that although that there was no significant difference in stiffnesses, standard nail fixation bore two times higher loads than clawed nail fixations. Under loading, decrease in the distance between fracture surfaces was approximately seven times higher in the clawed nail fixation when compared to standard nail fixations. Numerical results showed that wedge locked nail fixation provided equivalent mechanical behavior to standard interlocking nail.

DISCUSSION

In experiments of clawed nail fixation, the high decrease in the distance between fracture surfaces was evidence of the slippage of nail in the medullary canal. For a safe fixation, claws should be deployed when they are completely in contact with the cortical bone, they should be stuck into the bone in a fair amount, and the deployment in the distal third of the femur should be avoided. According to experimentally validated numerical analyses, wedge locked nail fixation may be an alternative for standard interlocking nail fixation if experimental studies support the present results.

Numerical evaluation of the mechanical properties of a novel expandable intramedullary nailing: A new alternative to standard interlocking nailing

INTRODUCTION

There has been a great effort in preventing the disadvantages of distal locking in intramedullary nailing to date. From this scope, a novel expandable nail fixation eliminating distal locking screws has been designed. The primary aim of this numerical parametric study is to investigate mechanical behavior of expandable nail fixation on the fractured femur model under different contact parameters which are effective in maintaining the nail position and to specify the appropriate values of these contact parameters for a safe fixation. The second aim is to compare mechanical behavior of the expandable nail fixation with the standard interlocking nail fixation.

MATERIALS AND METHODS

The expandable nail has three wedges which are responsible for distal fixation by compressing the medullary canal in the radial direction. 4th generation Sawbones femur model was used as bone model. A transverse osteotomy with 20 mm gap was created to simulate a subtrochanteric fracture. The fixations have been examined under axial compression with 1200 N and torsion with 7 Nm. In the parametric study, the tightening torque and static friction coefficient in wedge-canal contact were selected as contact parameters. The outputs were stiffnesses of the fixations, equivalent von-Mises stress distribution on the models, and load sharing between the canal and distal locking elements.

RESULTS

The results of the parametric study showed that the model with the tightening torque of 3 Nm and friction coefficient of 0.7 was the safest. The load borne by wedges is generally prone to increase with increased tightening torque and friction coefficient. The both fixations showed close stiffness and stress values.

CONCLUSION

The tightening torque of the wedge locking mechanism is directly effective in maintaining the nail position constant in canal, and the safety of the fixation is better ensured with increased tightening torque but stress states on bone must be carefully evaluated. The expandable nail provided comparable results to standard interlocking nails with respect to the fixation stiffness, stress, and contact forces. The expandable nailing may be evaluated as an alternative in the fractures of long bones in the case that the numerical results are supported by future experimental studies.