Decontamination of rough implant surfaces colonized by multispecies oral biofilm by application of leukocyte- and platelet-rich fibrin

Platelet-rich fibrin as an autologous biomaterial for bone regeneration: mechanisms, applications, optimization

Platelet-rich fibrin, a classical autologous-derived bioactive material, consists of a fibrin scaffold and its internal loading of growth factors, platelets, and leukocytes, with the gradual degradation of the fibrin scaffold and the slow release of physiological doses of growth factors. PRF promotes vascular regeneration, promotes the proliferation and migration of osteoblast-related cells such as mesenchymal cells, osteoblasts, and osteoclasts while having certain immunomodulatory and anti-bacterial effects. PRF has excellent osteogenic potential and has been widely used in the field of bone tissue engineering and dentistry. However, there are still some limitations of PRF, and the improvement of its biological properties is one of the most important issues to be solved. Therefore, it is often combined with bone tissue engineering scaffolds to enhance its mechanical properties and delay its degradation. In this paper, we present a systematic review of the development of platelet-rich derivatives, the structure and biological properties of PRF, osteogenic mechanisms, applications, and optimization to broaden their clinical applications and provide guidance for their clinical translation.

Antimicrobial effect of platelet-rich fibrin: A systematic review of in vitro evidence-based studies

This systematic review (SR) aimed to evaluate the antimicrobial potential of different types of platelet-rich fibrin (PRF) often used in regenerative treatments. An electronic search was performed in four databases and in Gray literature for articles published until January, 2023. The eligibility criteria comprised in vitro studies that evaluated the antimicrobial effect of different types of PRF. For the analysis of the risk of bias within studies, the modified OHAT (Office of Health Assessment and Translation) tool was used. For the evaluation of the results, a qualitative critical analysis was carried out in the synthesis of the results of the primary studies. Sixteen studies published between 2013 and 2021 were included in this SR. The antimicrobial effects of PRF variations (PRF, injectable PRF [I-PRF], PRF with silver nanoparticles [agNP-PRF], and horizontal PRF [H-PRF]), were analyzed against 16 types of bacteria from the oral, periodontal, and endodontic environments. All types of PRF showed significant antimicrobial action, with the antibacterial efficacy being more expressive than the fungal one. The I-PRF, H-PRF, and agNP-PRF subtypes improve antimicrobial activity. According to the OHAT analysis, no study was classified as having a high risk of bias. Evidence suggests that PRF variations have significant antimicrobial activity, with bacterial action being greater than fungal. Evolutions such as I-PRF, H-PRF, and agNP-PRF improve antimicrobial activity. Future studies analyzing the clinical effect of these platelets are fundamental. This SR was registered in INPLASY under number INPLASY202340016.

Effectiveness of mechanical and chemical decontamination methods for the treatment of dental implant surfaces affected by peri-implantitis: A systematic review and meta-analysis

OBJECTIVE

To assess which decontamination method(s) used for the debridement of titanium surfaces (disks and dental implants) contaminated with bacterial, most efficiently eliminate bacterial biofilms.

MATERIAL AND METHODS

A systematic search was conducted in four electronic databases between January 1, 2010 and October 31, 2022. The search strategy followed the PICOS format and included only in vitro studies completed on either dental implant or titanium disk samples. The assessed outcome variable consisted of the most effective method(s)-chemical or mechanical- removing bacterial biofilm from titanium surfaces. A meta-analysis was conducted, and data was summarized through single- and multi-level random effects model (p < .05).

RESULTS

The initial search resulted in 5260 articles after the removal of duplicates. After assessment by title, abstract, and full-text review, a total of 13 articles met the inclusion criteria for this review. Different decontamination methods were assessed, including both mechanical and chemical, with the most common method across studies being chlorhexidine (CHX). Significant heterogeneity was noted across the included studies. The meta-analyses only identified a significant difference in biofilm reduction when CHX treatment was compared against PBS. The remaining comparisons did not identify significant differences between the various decontamination methods.

CONCLUSIONS

The present results do not demonstrate that one method of decontamination is superior in eliminating bacterial biofilm from titanium disk and implant surfaces.

A longitudinal analysis of the impact of nonsurgical and surgical treatment of peri-implantitis upon clinical parameters and implant stability quotient values. A 2-3-year follow-up

OBJECTIVES

In this study, the aim was to investigate the medium- to long-term impact of peri-implantitis treatment upon clinical parameters and implant stability quotient values and to ascertain if magnetic resonance frequency analysis can be used as a diagnostic tool to demonstrate postoperative healing following treatment of peri-implantitis.

MATERIALS AND METHODS

A total of n = 26 patients (n = 86 implants) diagnosed with peri-implantitis were recruited for this prospective cohort study and four different treatment modalities were used. Baseline measurements of a number of clinical parameters as well as implant stability measurements in the form of ISQ were recorded. These measurements were repeated at 6, 12, and 24-36 months following treatment. Analysis of variance was performed for all implants treated as well as separately for each treatment modality. A regression model was also used to determine factors affecting ISQ measurements over time.

RESULTS

Treatment of peri-implantitis resulted in significant improvements of both average PPDs and BOP (p < .0001 and p < .01). ISQ values marginally improved initially for all treatment modalities, but improvement was only maintained for 2-3 years in treatment modalities I (+1.28), III (+1.49), and IV (+2.92). There was a statistically significant negative linear correlation between average PPD and the ISQ values recorded both at baseline (r = -.618, p < 0.0001) and at 2/3 years (r = -.604, p < 0.0001).

CONCLUSION

Over the 2-3-year follow-up period, all four treatment modalities led to improved clinical and radiographic peri-implant parameters but implant stability posttreatment, as indicated by the fact that the recorded ISQ scores remained stable. As a result, use of MRFA as an adjunct to the traditionally used periodontal and radiographic tools for the evaluation of postoperative implant stability following the treatment of peri-implant disease cannot be recommended.

Evaluation of Implant Surface Modification with Nanohydroxyapatite Associated with the Use of L-PRF: In Vivo Study in Rats

Leukocyte-platelet-rich fibrin (L-PRF) contains growth factors that stimulate bone regeneration. This study evaluated the bone repair in a tibia rat model around two implant surfaces in combination or not with L-PRF by assessing microtomographic and histomorphometric parameters. A total of 48 female rats were used in the study, in which 24 received implants with two types of surface treatments (dual acid etched-DAE or nanohydroxyapatite-nanoHA), and the other 24 received the same mini implants with L-PRF, which was collected by cardiac puncture, centrifugated, and inserted in the bone bed. The animals were euthanized 7 and 30 days after implant placement, and the retrieved samples were prepared for microtomographic and histomorphometric (bone-to-implant contact-BIC; and Bone Area Fraction Occupancy-BAFO) analyses. The adhesion of the nanoHA surface onto the implant surface was investigated by insertion and removal in simulated bone medium (Sawbones). The adhesion evaluation revealed that the loss of nanoHA after this procedure (as measured with SEM) from the implant surface was less than 1%. Overall, the nanoHA surface presented more bone in contact and in proximity to the implant, a higher bone surface/tissue volume fraction, a higher number of bone trabeculae, as well as trabecular separation relative to the DAE surface. Such results were more evident when the nanoHA surface was combined with L-PRF and after 30 days in vivo. The nanoHA surface presented higher BAFO when compared to DAE, with or without association with L-PRF. Therefore, implants with a nanoHA surface potentially benefit from the association to L-PRF.

Efficacy of concentrated growth factor versus collagen membrane in reconstructive surgical therapy of peri-implantitis: 3-year results of a randomized clinical trial

Objectives

To compare the 3-year clinical and radiographic outcomes of two different reconstructive surgical management of peri-implantitis using a bone substitute in combination with either concentrated growth factor (CGF) or collagen membrane (CM).

Material and methods

Fifty-one patients who had at least one implant presenting peri-implantitis with an intrabony defect were filled with a xenogenic bone grafting material and covered either CGF or CM. Clinical and radiographic assessments were carried out at baseline and postoperative years 1 and 3. Three different composite outcomes were defined to evaluate treatment success at a 3-year follow-up. The effects of possible prognostic indicators on treatment success were identified by using multilevel regression analysis.

Results

The changes in probing depth (PD) and radiographic vertical defect depth (VDD) between baseline and year 1 and baseline and year 3 presented significantly greater decreases for the CM group in comparison with the CGF group (p < 0.05). No significant differences between the two treatment modalities were demonstrated regarding treatment success outcomes. History of periodontitis, VDD at baseline, and the number of intrabony defect walls revealed significant impacts on treatment success (p = 0.033; OR = 3.50, p = 0.039; OR = 0.975, and p = 0.024; OR = 7.0 and p = 0.019;OR = 6.0, respectively).

Conclusions

CM in combination with a bone substitute seems to have slightly better outcomes compared to the CGF membranes in reconstructive surgical therapy of peri-implantitis. The history of periodontitis, baseline VDD, and peri-implant bone defect configuration could be possible predictors influencing treatment success.

Trial registration

ClinicalTrials.gov NCT04769609.

Clinical relevance

For the reconstruction of peri-implant bone defects, using a bone substitute in combination with a collagen membrane may show more favorable outcomes.

Antimicrobial Mechanisms of Leucocyte- and Platelet Rich Fibrin Exudate Against Planktonic Porphyromonas gingivalis and Within Multi-Species Biofilm: A Pilot Study

Leucocyte- and platelet rich fibrin (L-PRF) is an autologous biomaterial used in regenerative procedures. It has an antimicrobial activity against P. gingivalis although the mechanism is not fully understood. It was hypothesized that L-PRF exudate releases hydrogen peroxide and antimicrobial peptides that inhibit P. gingivalis growth. Agar plate and planktonic culture experiments showed that the antimicrobial effect of L-PRF exudate against P. gingivalis was supressed by peroxidase or pepsin exposure. In developing multi-species biofilms, the antimicrobial effect of L-PRF exudate was blocked only by peroxidase, increasing P. gingivalis growth with 1.3 log genome equivalents. However, no effect was shown on other bacteria. Pre-formed multi-species biofilm trials showed no antimicrobial effect of L-PRF exudate against P. gingivalis or other species. Our findings showed that L-PRF exudate may release peroxide and peptides, which may be responsible for its antimicrobial effect against P. gingivalis. In addition, L-PRF exudate had an antimicrobial effect against P. gingivalis in an in vitro developing multi-species biofilm.

Surface Engineering Strategies to Enhance the In Situ Performance of Medical Devices Including Atomic Scale Engineering

Decades of intense scientific research investigations clearly suggest that only a subset of a large number of metals, ceramics, polymers, composites, and nanomaterials are suitable as biomaterials for a growing number of biomedical devices and biomedical uses. However, biomaterials are prone to microbial infection due to Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), Staphylococcus epidermidis (S. epidermidis), hepatitis, tuberculosis, human immunodeficiency virus (HIV), and many more. Hence, a range of surface engineering strategies are devised in order to achieve desired biocompatibility and antimicrobial performance in situ. Surface engineering strategies are a group of techniques that alter or modify the surface properties of the material in order to obtain a product with desired functionalities. There are two categories of surface engineering methods: conventional surface engineering methods (such as coating, bioactive coating, plasma spray coating, hydrothermal, lithography, shot peening, and electrophoretic deposition) and emerging surface engineering methods (laser treatment, robot laser treatment, electrospinning, electrospray, additive manufacturing, and radio frequency magnetron sputtering technique). Atomic-scale engineering, such as chemical vapor deposition, atomic layer etching, plasma immersion ion deposition, and atomic layer deposition, is a subsection of emerging technology that has demonstrated improved control and flexibility at finer length scales than compared to the conventional methods. With the advancements in technologies and the demand for even better control of biomaterial surfaces, research efforts in recent years are aimed at the atomic scale and molecular scale while incorporating functional agents in order to elicit optimal in situ performance. The functional agents include synthetic materials (monolithic ZnO, quaternary ammonium salts, silver nano-clusters, titanium dioxide, and graphene) and natural materials (chitosan, totarol, botanical extracts, and nisin). This review highlights the various strategies of surface engineering of biomaterial including their functional mechanism, applications, and shortcomings. Additionally, this review article emphasizes atomic scale engineering of biomaterials for fabricating antimicrobial biomaterials and explores their challenges.

Decontamination of multispecies oral biofilm from rough implant surface by airflow with glycine

Objectives

Decontamination of biofilm‐colonized rough implant surfaces remains challenging. We investigated the effect of airflow with glycine powder (AFG) on decontamination of mature oral multispecies biofilm from a sandblasted and acid etched (SLA) titanium surface.

Materials and Methods

Subgingival dental plaque was cultured on SLA disks anaerobically for 21 days. AFG with various settings and distances was applied directly on the disks with or without previous rinse of 0.9% NaCl. The specimens were then analyzed through scanning electron microscope and remaining bacteria on the implant surface were quantified and statistically compared.

Results

Mature oral biofilm with cocci and rods as major morphotypes, as well as spiral‐ and filamentous‐shaped organisms, was formed on the untreated disks. Saline rinsing removed the thick biofilm layer but left numerous of coccoid bacteria in rough surface pits. AFG effectively removed most of the bacteria from the pits. Both 25% and 50% power settings were equally effective at 3‐mm distance. With 50% power, AFG successfully removed bacteria at both 3‐ and 6‐mm distance. When AFG was applied on native biofilm without prior rinsing with saline, it effectively removed the biofilm including bacteria in the pits.

Conclusion

Application of AFG appears effective in removing bacteria from rough implant surfaces.

Platelet activation and antimicrobial activity of L-PRF: a preliminary study

Leukocyte and platelet rich fibrin (L-PRF) is one of the platelet concentrates used to support regeneration and healing process. Many studies showed possible immunological and antibacterial properties of L-PRF. We perform an in vitro study to analyze the effect of L-PRF on platelet activation, platelet-leukocytes interactions and antimicrobial activity, important components in the healing process. Molecular biomarkers related with platelet activation and platelet-leukocyte interactions were analyzed by means of flow cytometry when L-PRF exudate was added to whole blood platelets. L-PRF membrane was used to evaluate antimicrobial activity using Enterococcus faecalis (ATCC 29212), Pseudomonas aeruginosa (ATCC 27853) and Candida albicans (ATCC 90028). Our experimental design allows to evaluate platelet activation and analyze molecular biomarkers of other immune cells and platelet-leukocyte interactions. From the results obtained we can conclude that L-PRF can be a valuable tool in healing process, efficient in activating platelets of whole blood and inhibiting microbial growth. In our opinion, the use of L-PRF exudate, in addition to L-PRF membrane, presents some advantages that have to be considered in clinical trials. Additional research on the characterization and quantification of cells and its products present in the L-PRF exudate, as well as on the temporal factor released. Also, further studies using strains isolated from clinical cases are needed.

Bacterial adhesion to biomaterials: What regulates this attachment? A review

•

Bacterial adhesion to the surface of dental materials play a significant role in infections.

•

The factors that govern microbial attachment involves different types of physical-chemical interactions and biological processes.

•

Studying bacterial adhesion makes it possible to understand the mechanisms involved in attachment and helps in the search for technologies that promote antibacterial surfaces.

Bacterial attachment to biomaterials is of great interest to the medical and dental field due to its impact on dental implants, dental prostheses, and others, leading to the need to introduce methods for biofilm control and mitigation of infections. Biofilm adhesion is a multifactorial process and involves characteristics relevant to the bacterial cell as well as biological, chemical, and physical properties relative to the surface of biomaterials. Bacteria encountered different environmental conditions during their growth and developed interspecies communication strategies, as well as various mechanisms to detect the environment and facilitate survival, such as chemical sensors or physical detection mechanisms. However, the factors that govern microbial attachment to surfaces are not yet fully understood. In order to understand how bacteria interact with surfaces, as well as to characterize the physical-chemical properties of bacteria adhesins, and to determine their interrelation with the adhesion to the substrate, in recent years new techniques of atomic force microscopy (AFM) have been developed and helped by providing quantitative results. Thus, the purpose of this review is to gather current studies about the factors that regulate microbial adhesion to surfaces in order to offer a guide to studies to obtain technologies that provide an antimicrobial surface.