Drug release properties of polymer coated ion-exchange resin complexes: experimental and theoretical evaluation

Preparation of Sustained Release Formulation of Verapamil Hydrochloride Using Ion Exchange Resins

The purpose of this investigation was to formulate and evaluate the interaction between cation exchange resins and verapamil hydrochloride. The uptake studies were conducted using the rotating bottle apparatus. The Langmuir-like equation was applied to the experimental data and the maximum drug loading was determined from the Langmuir-like parameters. The drug-resin complexes were evaluated using XRD, SEM, and particle size analysis. Release studies were performed using USP dissolution apparatus 2. The resin with the lowest percentage of cross-linking had the highest uptake capacity. The percent increase in particle size due to complexation was found to be associated with drug loading; the highest drug loading had the highest increase in particle size. The X-ray diffraction patterns of the resins and the drug-resin complexes showed that they were both amorphous. The maximum drug release was approximately 40% when conventional dissolution testing was used. Results showed that sink conditions could not be maintained using conventional dissolution methods. Maximum drug release increased dramatically by increasing the volume of samples withdrawn and fresh dissolution medium added. Excellent correlation was obtained between sample volume and drug release rate with an R-value of 0.988. Particle diffusion-controlled model and film diffusion-controlled model were both applied to the experimental data. The results indicated that the rate-limiting step is the diffusion of the exchanging cations through the liquid film. The modified release formulation was prepared successfully and correlated very well with the USP monograph for verapamil hydrochloride extended release capsules.

Research Progress of Preparation Technology of Ion-Exchange Resin Complexes

As insoluble polymer materials, ion-exchange resins (IERs) can exchange their own ions with desirable charged ions in the solution. According to the affinity of active moieties for soluble counterions, IERs could be categorized into the following four types: strongly acidic cation, weakly acidic cation, strongly basic anion, and weakly basic anion exchange resins. Due to their relative safety and high drug-loading capacity, IERs have garnered extensive attention in the pharmaceutical field since the 1950s. As numerous investigations combine drugs with IERs, this article summarizes the technologies employed in these studies from four aspects: IER screening principles, combining technologies, characterization methods, and in vitro and in vivo release of drug-resinate complexes. In addition, the advantages and disadvantages of various technologies and their scope are expounded. The article provides new insights on the preparation of ion-exchange resin complexes.

Study on the Complexation and Release Mechanism of Methylphenidate Hydrochloride Ion Exchange Resin Complex

Since the advent of ion exchange resin, it has been widely used in many fields, including drug delivery systems. The drug binds to the resin through an exchange reaction to form a drug–resin complex, which can gradually release drugs through the exchange of physiological ions in the gastrointestinal tract, to realize functions such as taste masking and regulating release. In this study, the complexes of methylphenidate hydrochloride and Amberlite IRP69 were prepared and evaluated to explore the mechanism of complexation, influencing factors and release mechanism at a molecular level. Firstly, with the properties of the selected complexes, molecular dynamics simulation was innovatively used to find that the intermolecular interaction between drug molecules and ion exchange resin molecules is mainly caused by the stacking effect of π and salt bridges. Secondly, with the drug loading status as an indicator, the factors affecting the compounding process of the drug and resin were explored. Finally, the release mechanism of the drug–resin complex was studied by mathematical model fitting. In summary, a variety of methods were used to study the mechanism of complexation and release between drug and resin, providing a theoretical basis for promoting the marketing of ion−exchange resin−mediated oral preparations.

Gastro-retentive drug delivery systems: a recent update on clinical pertinence and drug delivery

Gastro-retentive drug delivery systems are some of the best technologies delivered through oral route. These mainly came into picture for their effective local action in the GI region, specifically for the drugs with narrow absorption window. In the recent decades, several technologies have evolved showing different mechanisms for retaining the drug in GI region for longer duration with increased bioavailability. Floatable, mucoadhesive, swelable, magnetic, nanofibrous, high-density, and expandable systems have been investigated extensively as the potential gastro-retentive strategies. The advances in the technologies studied, their clinical pertinence, and methods of drug delivery are described in this review with their immense future utilities. Their entry into the pharmaceutical market is a huge matter to look into as most of the studied strategies are facing problems and hence are underrated to overcome the clinical trials. Their success in the clinical trials are enormously required for gaining their access into the pharmaceutical market. Selection of the right technology for the right purpose through the right mechanism of action is to be done for obtaining the system with desired activity.

Food material properties as determining factors in nutrient release during human gastric digestion: a review

The fundamental mechanisms of nutrient release from solid foods during gastric digestion consists of multiple elementary processes. These include the diffusion of gastric juice into the food matrix and its simultaneous enzymatic degradation and mechanical breakdown by the peristaltic activity of the stomach. Understanding the relative role of these key processes, in association with the composition and structure of foods, is of paramount importance for the design and manufacture of novel foods possessing specific target behavior within the body. This review covers the past and current literature with respect to the in-stomach processes leading to physical and biochemical disintegration of solid foods and release of nutrients. The review outlines recent progress in experimental and modeling methods used for studying food disintegration mechanisms and concludes with a discussion on potential future research directions in this field. Information from pharmaceutical science-based modeling approaches describing nutrient release kinetics as a result of food disintegration in the gastric environment is also reviewed. Future research aimed at understanding gastric digestion is important not only for setting design principles for novel food design but also for understanding mechanisms underpinning dietary guidelines to consume wholesome foods.

Current State and Future Perspectives on Gastroretentive Drug Delivery Systems

In recent years, many attempts have been made to enhance the drug bioavailability and therapeutic effectiveness of oral dosage forms. In this context, various gastroretentive drug delivery systems (GRDDS) have been used to improve the therapeutic efficacy of drugs that have a narrow absorption window, are unstable at alkaline pH, are soluble in acidic conditions, and are active locally in the stomach. In this review, we discuss the physiological state of the stomach and various factors that affect GRDDS. Recently applied gastrointestinal technologies such as expandable, superporous hydrogel; bio/mucoadhesive, magnetic, ion-exchange resin; and low- and high-density-systems have also been examined along with their merits and demerits. The significance of in vitro and in vivo evaluation parameters of various GRDDS is summarized along with their applications. Moreover, future perspectives on this technology are discussed to minimize the gastric emptying rate in both the fasted and fed states. Overall, this review may inform and guide formulation scientists in designing the GRDDS.

Inner layer-embedded contact lenses for ion-triggered controlled drug delivery

Drug leakage during manufacturing and storage process is the main obstacle hindering the application of contact lenses as the carrier for extended ocular drug delivery. In this study, we have designed a novel inner layer-embedded contact lens capable of ion-triggered drug release for extended ocular drug delivery. Using betaxolol hydrochloride as a drug model, drug-ion exchange resin complex dispersed polymer film was used as an inner layer, and silicone hydrogel was used as an outer layer to fabricate inner layer-embedded contact lens. Influence of composition of the inner film and crosslinking degree of the outer hydrogel on drug release profile was studied and optimized for weekly use. The ion-triggered drug eluting property enables the inner layer-embedded contact lens being stable when stored in distilled water at 5 °C for at least 30 days with ignorable drug loss and negligible changes in drug release kinetics. In vivo pharmacokinetic study in rabbits showed sustained drug release for over 168 h in tear fluid, indicating significant improvement in drug corneal residence time. A level A IVIVC was established between in vitro drug release and in vivo drug concentration in tear fluid. In conclusion, this inner layer embedded contact lens design could be used as a platform for extended ocular drug delivery with translational potential for both anterior and posterior ocular disease therapy.

Diclofenac sodium ion exchange resin complex loaded melt cast films for sustained release ocular delivery

Purpose: The goal of the present study is to develop polymeric matrix films loaded with a combination of free diclofenac sodium (DFS_free) and DFS:Ion exchange resin complexes (DFS:IR) for immediate and sustained release profiles, respectively.

Methods: Effect of ratio of DFS and IR on the DFS:IR complexation efficiency was studied using batch processing. DFS:IR complex, DFS_free, or a combination of DFS_free+DFS:IR loaded matrix films were prepared by melt-cast technology. DFS content was 20% w/w in these matrix films. In vitro transcorneal permeability from the film formulations were compared against DFS solution, using a side-by-side diffusion apparatus, over a 6 h period. Ocular disposition of DFS from the solution, films and corresponding suspensions were evaluated in conscious New Zealand albino rabbits, 4 h and 8 h post-topical administration. All in vivo studies were carried out as per the University of Mississippi IACUC approved protocol.

Results: Complexation efficiency of DFS:IR was found to be 99% with a 1:1 ratio of DFS:IR. DFS release from DFS:IR suspension and the film were best-fit to a Higuchi model. In vitro transcorneal flux with the DFS_free+DFS:IR_(1:1)(1 + 1) was twice that of only DFS:IR_(1:1) film. In vivo, DFS solution and DFS:IR_(1:1) suspension formulations were not able to maintain therapeutic DFS levels in the aqueous humor (AH). Both DFS_free and DFS_free+DFS:IR_(1:1)(3 + 1) loaded matrix films were able to achieve and maintain high DFS concentrations in the AH, but elimination of DFS from the ocular tissues was much faster with the DFS_free formulation.

Conclusion: DFS_free+DFS:IR combination loaded matrix films were able to deliver and maintain therapeutic DFS concentrations in the anterior ocular chamber for up to 8 h. Thus, free drug/IR complex loaded matrix films could be a potential topical ocular delivery platform for achieving immediate and sustained release characteristics.

Treatment of intermediate stage hepatocellular carcinoma: a review of intrahepatic doxorubicin drug-delivery systems

The biopharmaceutical properties of doxorubicin delivered via two drug-delivery systems (DDSs) for the palliative treatment of unresectable hepatocellular carcinoma were reviewed with relation to the associated liver and tumor (patho)physiology. These two DDSs, doxorubicin emulsified with Lipiodol® and doxorubicin loaded into DC Bead® are different regarding tumor delivery, release rate, local bioavailability, if and how they can be given repeatedly, biodegradability, length of embolization and safety profile. There have been few direct head-to-head comparisons of these DDSs, and in-depth investigations into their in vitro and in vivo performance is warranted.

Simple preparation of coated resin complexes and their incorporation into fast-disintegrating tablets

Even though ion-exchange resins are good drug carriers to get sustained release properties, it may not be good enough only with themselves. For further sustained release effect, a diffusion barrier or coating on the resins' surface can be utilized. Initially, microencapsulation using a w/o/w double emulsion method was used to apply ethylcellulose (EC) onto the drug/resin complexes. Typical pharmaceutical waxes can be alternative materials to delay the drug release from the complex. After the coating, the coated resin particles were incorporated into fast-disintegrating tablets to get an idea regarding the effects of wet granulation and compression on the release. Among the different grades of ECs tested (Ethocel 20, 45, and 100), more viscous EC resulted in better morphologies and sustained release effects. Because the drug release rate was significantly dependent on the coating level, the release rate can be modified easily by changing different levels of the coating. The drug release rate was also strongly dependent on the granulation and compaction process as the coated particles were incorporated into the tablet dosage form. Among the tested waxes, stearic acid had an effect on the sustained release together with lubrication and wetting properties. Even though microencapsulation or wax coating may not be practical for real manufacturing, the results may give valuable information how to formulate sustained release dosage forms and their properties on the tablet preparation.

Wet granulation as innovative and fast method to prepare controlled release granules based on an ion‐exchange resin

The goal of this work was to evaluate the suitability of wet granulation as an innovative and fast method for the preparation of granules containing a drug-resin complex (resinate), having cholestyramine as resin and potassium diclofenac (KD) as drug. Resinate and granules were prepared directly by steam granulation in high shear mixer (method A), using two different amount of resin (granules 1 and 2). For comparison granules 1 were also prepared by conventional batch method followed by steam granulation (method B). All granules showed quite irregular shape, main size fractions between 75 and 500 microm, good flowability and uniform KD distribution. Granules 1A exhibited controlled release profiles at pH 7.4, while granules 2A showed a burst effect due to KD free crystals. FT-IR studies confirmed the complete complexation between resin and KD during the granulation process with method A for granules 1. Finally, the dissolution test of granules 1A in different media revealed a controlled drug release in 12 h, providing the utility of this system for enteric drug delivery. Granules 1B evidenced similar characteristics to those of granules 1A; the drawback of the multistep procedure was related to the long processing time.