Biowaiver monographs for immediate release solid oral dosage forms: prednisolone

Targeted Treatments for Myasthenia Gravis in Children and Adolescents

Myasthenia gravis (MG) is an antibody-mediated disorder of the neuromuscular junction affecting children and adults. MG is a treatable condition with most patients requiring immunosuppression for disease control and/or remission. Juvenile myasthenia gravis (JMG) is rare in comparison with adult-onset MG but given the same underlying pathophysiology, treatment strategies are similar to those in adults. Until recently, there were only a few randomised controlled trials (RCTs) for MG treatments in adults and none in children, and management strategies were primarily based on expert consensus. In addition, treatment options for refractory MG cases have been severely limited, resulting in poor long-term quality of life in such patients due to the significant disease burden. Recently, there have been several RCTs focussing on novel therapeutic strategies with potentially promising outcomes, suggesting a change in MG management over the coming years and access to more effective and faster-acting drugs for MG patients. This paper will review current and new MG treatments including efgartigimod, eculizumab, rozanolixizumab, ravulizumab, and zilucoplan, with a focus on juvenile myasthenia gravis.

Evaluating the solubility of compounds intended for intramammary infusion based upon tests conducted across a range of milk matrices

The ability to evaluate drug solubility in milk and milk-related products has relevance both to human and veterinary medicine. Model compounds explored in a previous investigation focused on drug solubility assessments when delivered in milk-associated vehicles for administration to human patients. In the current investigation, we focus on the solubility of drugs intended for delivery via intramammary infusion to cattle. Because there are logistic challenges typically associated with obtaining raw milk samples for these tests, there is a need to determine potential alternative media as a substitute for raw bovine milk. Given the complexity of the milk matrix, aqueous media do not reflect the range of factors that could impact these solubility assessments. This led to the current effort to explore the magnitude of differences that might occur when substituting raw bovine milk with off-the-shelf milk products such as whole milk, skim milk, or reconstituted whole milk powder. We considered conclusions based upon the solubility assessments derived from the use of the model compounds studied in our previous report and compared them to conclusions obtained when testing two drugs with differing physicochemical characteristics that are approved for administration via bovine intramammary infusion: cephapirin benzathine and cephapirin sodium. Based upon these results, we recommend that whole milk or reconstituted whole milk can substitute for bovine raw milk for the solubility assessment of compounds intended for administration via intramammary infusion. However, unlike the human drug situation, these tests should be conducted at 38°C.

Water-soluble chitosan eases development of mucoadhesive buccal films and wafers for children

Oromucosal films and wafers are user-friendly solid dosage forms offering easy and convenient administration, as well as rapid or controlled drug delivery. The aim of this study was to develop prednisolone containing child-friendly chitosan-based mucoadhesive films and wafers with a prolonged residence time on the buccal mucosa. Four different chitosan types (different molecular weights, degree of deacetylation (DDA), pattern of deacetylation) were studied for films prepared by solvent-cast-evaporation and wafers by freeze-drying. Mucoadhesive properties correlated with swelling abilities and were dependent on the chitosan type, the solvent, and the preparation method. Mucoadhesive forces were higher for formulations containing chitosan with higher DDA and for wafers compared to films. The drug release was relatively fast, especially for films (approx. 90 % in 15 minutes) and steadier for wafers (90 % in 45-120 minutes). Permeability was evaluated using artificial membranes and HT29-MTX cell-monolayers. The developed formulations exhibited good biocompatibility. Organoleptic properties can be improved by choosing a homogenously deacetylated chitosan type that provides a more neutral pH. Using hydroxypropyl-beta-cyclodextrin-complexation for taste masking of bitter drugs also reduced wafers' drug release rate. Mucoadhesive wafers are promising alternatives to films with a slower drug release rate and stronger mucoadhesion.

Microemulsions as Lipid Nanosystems Loaded into Thermoresponsive In Situ Microgels for Local Ocular Delivery of Prednisolone

This study aimed to develop and evaluate thermoresponsive in situ microgels for the local ocular delivery of prednisolone (PRD) (PRD microgels) to improve drug bioavailability and prolong ocular drug residence time. Lipid nanosystems of PRD microemulsions (PRD-MEs) were prepared and evaluated at a drug concentration of 0.25-0.75%. PRD microgels were prepared by incorporating PRD-MEs into 10 and 12% Pluronic® F127 (F127) or combinations of 12% F127 and 1-10% Kolliphor®P188 (F68). PRD microgels were characterized for physicochemical, rheological, and mucoadhesive properties, eye irritation, and stability. Results showed that PRD-MEs were clear, miscible, thermodynamically stable, and spherical with droplet size (16.4 ± 2.2 nm), polydispersity index (0.24 ± 0.01), and zeta potential (-21.03 ± 1.24 mV). The PRD microgels were clear with pH (5.37-5.81), surface tension (30.96-38.90 mN/m), size, and zeta potential of mixed polymeric micelles (20.1-23.9 nm and -1.34 to -10.25 mV, respectively), phase transition temperature (25.3-36 °C), and gelation time (1.44-2.47 min). The FTIR spectra revealed chemical compatibility between PRD and microgel components. PRD microgels showed pseudoplastic flow, viscoelastic and mucoadhesive properties, absence of eye irritation, and drug content (99.3 to 106.3%) with a sustained drug release for 16-24 h. Microgels were physicochemically and rheologically stable for three to six months. Therefore, PRD microgels possess potential vehicles for local ocular delivery.

Efficacy of Prednisolone/Zn Metal Complex and Artemisinin Either Alone or in Combination on Lung Functions after Excessive Exposure to Electronic Cigarettes Aerosol with Assessment of Antibacterial Activity

The use of transition metal complexes as therapeutic compounds has become more and more pronounced. These complexes offer a great diversity of uses in their medicinal applications. Electronic cigarettes (ECs) are an electronic nicotine delivery system that contain aerosol (ECR). The ligation behavior of prednisolone, which is a synthetic steroid that is used to treat allergic diseases and asthma arthritis, and its Zn (II) metal complex were studied and characterized based on elemental analysis, molar conductance, Fourier-transform infrared (FT-IR) spectra, electronic spectra, XRD, scanning electron microscopy (SEM), energy dispersive x-ray (EDX), and transmission electron microscopy (TEM). The FT-IR spectral data revealed that PRD acts as a mono-dentate ligand via oxygen atoms of the carbonyl group. Electronic and FT-IR data revealed that the PRD/Zn (II) metal complexes have square planner geometry. Artemisinin (ART) is the active main constituent of Artemisia annua extract, and it has been demonstrated to exert an excellent antimalarial effect. The experiment was performed on 40 male mice that were divided into the following 7 groups: Control, EC group, PRD/Zn, ART, EC plus PRD/Zn, EC plus ART, and PRD plus combination of PRD/Zn and ART. Serum CRP, IL-6, and antioxidants biomarkers were determined. Pulmonary tissue histology was evaluated. When in combination with Zn administration, PRD showed potent protective effects against pulmonary biochemical alterations induced by ECR and suppressed severe oxidative stress and pulmonary structure alterations. Additionally, PRD/Zn combined with ART prevented any stress on the pulmonary tissues via antioxidant regulation, reducing inflammatory markers CRP and Il-6 and improving antioxidant enzymatic levels more than either PRD or ART alone. Therefore, PRD/Zn combined with ART produced a synergistic effect against any sort of oxidative stress and also improved the histological structure of the lung tissues. These findings are of great importance for saving pulmonary function, especially during pandemic diseases, such as during the COVID-19 pandemic.

Pharmacokinetics of Orally Administered Prednisolone in Alpacas

This study aimed to determine the pharmacokinetics of prednisolone following intravenous and oral administration in healthy adult alpacas. Healthy adult alpacas were given prednisolone (IV, n = 4), as well as orally (PO, n = 6). Prednisolone was administered IV once (1 mg/kg). Oral administration was once daily for 5 days (2 mg/kg). Each treatment was separated by a minimum 4 month washout period. Samples were collected at 0 (pre-administration), 0.083, 0.167, 0.25, 0.5, 0.75, 1, 2, 4, 8, 12, and 24 h after IV administration, and at 0 (pre-administration), 0.25, 0.5, 0.75, 1, 2, 4, 8, 12, 24 after the first and 5^th PO administration. Samples were also taken for serial complete blood count and biochemistry analysis. Prednisolone concentration was determined by high pressure liquid chromatography. Non-compartmental pharmacokinetic parameters were then determined. After IV administration clearance was 347 mL/kg/hr, elimination half-life was 2.98 h, and area under the curve was 2,940 h^*ng/mL. After initial and fifth oral administration elimination half-life was 5.27 and 5.39 h; maximum concentration was 74 and 68 ng/mL; time to maximum concentration was 2.67 and 2.33 h; and area under the curve was 713 and 660 hr^*ng/mL. Oral bioavailability was determined to be 13.7%. Packed cell volume, hemoglobin, and red blood cell counts were significantly decreased 5 days after the first PO administration, and serum glucose was significantly elevated 5 days after the first PO administration. In conclusion, serum concentrations of prednisolone after IV and PO administration appear to be similar to other veterinary species. Future research will be needed to determine the pharmacodynamics of prednisolone in alpacas.

Prediction of severe adverse events, modes of action and drug treatments for COVID-19's complications

Following SARS-CoV-2 infection, some COVID-19 patients experience severe host driven adverse events. To treat these complications, their underlying etiology and drug treatments must be identified. Thus, a novel AI methodology MOATAI-VIR, which predicts disease-protein-pathway relationships and repurposed FDA-approved drugs to treat COVID-19's clinical manifestations was developed. SARS-CoV-2 interacting human proteins and GWAS identified respiratory failure genes provide the input from which the mode-of-action (MOA) proteins/pathways of the resulting disease comorbidities are predicted. These comorbidities are then mapped to their clinical manifestations. To assess each manifestation's molecular basis, their prioritized shared proteins were subject to global pathway analysis. Next, the molecular features associated with hallmark COVID-19 phenotypes, e.g. unusual neurological symptoms, cytokine storms, and blood clots were explored. In practice, 24/26 of the major clinical manifestations are successfully predicted. Three major uncharacterized manifestation categories including neoplasms are also found. The prevalence of neoplasms suggests that SARS-CoV-2 might be an oncovirus due to shared molecular mechanisms between oncogenesis and viral replication. Then, repurposed FDA-approved drugs that might treat COVID-19's clinical manifestations are predicted by virtual ligand screening of the most frequent comorbid protein targets. These drugs might help treat both COVID-19's severe adverse events and lesser ones such as loss of taste/smell.

An Assessment of Occasional Bio-Inequivalence for BCS1 and BCS3 Drugs: What are the Underlying Reasons?

Despite having adequate solubility properties, bioequivalence (BE) studies performed on immediate release formulations containing BCS1/3 drugs occasionally fail. By systematically evaluating a set of 17 soluble drugs where unexpected BE failures have been reported and comparing to a set of 29 drugs where no such reports have been documented, a broad assessment of the risk factors leading to BE failure was performed. BE failures for BCS1/3 drugs were predominantly related to changes in C_max rather than AUC. C_max changes were typically modest, with minimal clinical significance for most drugs. Overall, drugs with a sharp plasma peak were identified as a key factor in BE failure risk. A new pharmacokinetic term (t½C_max) is proposed to identify drugs at higher risk due to their peak plasma profile shape. In addition, the analysis revealed that weak acids, and drugs with particularly high gastric solubility are potentially more vulnerable to BE failure, particularly when these features are combined with a sharp C_max peak. BCS3 drugs, which are often characterised as being more vulnerable to BE failure due to their potential for permeation and transit to be altered, particularly by excipient change, were not in general at greater risk of BE failures. These findings will help to inform how biowaivers may be optimally applied in the future.

Stepwise optimization and sensitivity improvement of green micellar electrokinetic chromatography method to simultaneously determine some fluoroquinolones and glucocorticoids present in various binary ophthalmic formulations

A sensitive micellar electrokinetic chromatography method is presented to simultaneously quantify ofloxacin, gatifloxacin, dexamethasone sodium phosphate and prednisolone acetate. The method has the advantages of being rapid, accurate, reproducible, ecologically acceptable and sensitive. The electrophoretic separation utilized 20 mm borate buffer as background electrolyte with pH 10.0 ± 0.1 and 50 mm sodium dodecyl sulfate as a micelle forming molecule. A capillary tube (50 μm i.d., 33 cm) of fused silica was used and on-column diode array detection at 243 nm for dexamethasone sodium phosphate and prednisolone acetate, and 290 nm for ofloxacin and gatifloxacin. Various factors were optimized such as the background electrolyte (type, concentration and pH), addition of sodium dodecyl sulfate and its concentration, detection wavelength, applied voltage and injection parameters. The studied drugs were efficiently separated in 6.2 min, at 20 kV with high resolution. The greenness of the method was estimated using an eco-scale tool and the presented method was found to have excellent green characteristics. The method was validated in conformance with International Conference on Harmonization guidelines, with acceptable accuracy, precision and selectivity. The suggested method can be employed for the economic analysis of the four drugs in dissimilar binary combinations of eye drops saving solvents and chemicals.

BCS-based biowaivers: Extension to paediatrics

A BCS-based biowaiver allows extrapolation of drug product bioequivalence (when applicable) based on the BCS class of the drug and in vitro dissolution testing. Drug permeability and solubility considerations for adult BCS might not apply directly to paediatric subpopulations and bridging of adult and paediatric formulations should be undertaken with caution. The aims of this study were to: (i.) identify compounds which would change drug solubility classification in the paediatric population, and (ii.) to assess the risk of extending BCS-based biowaiver criteria into paediatric products of these compounds. Amoxicillin, prednisolone, and amlodipine were selected as the model compounds. Dissolution studies of IR formulations of these compounds were conducted with USP II (paddle) and mini-paddle apparatus, in media of three pHs (pH 1.2, 4.5 and 6.8). Three dissolution setups were tested: (1) 'typical' BCS-based biowaiver conditions, (2) "BE" setup derived from BE study protocols (volume: 250 mL), and (3) "paediatric" setup based on representative volume for the paediatric population (50 mL). Results revealed that extension of regulated BCS-based biowaiver criteria for paediatric application is not as simple as scaling down volumes. It was further shown that BCS-based biowaiver criteria should not be applied when there is the risk of change of the drug solubility class, from the adult to paediatric populations. A deeper knowledge of the paediatric gastrointestinal environment is still lacking and would assist in refining the biopharmaceutical tools needed to appropriately evaluate formulation performance across age groups. This would potentially reduce the number of clinical studies required and speed up formulation development.

Chronopharmacology of glucocorticoids

Glucocorticoids influence a wide array of metabolic, anti-inflammatory, immunosuppressive, and cognitive signaling processes, playing an important role in homeostasis and preservation of normal organ function. Synthesis is regulated by the hypothalamic-pituitary-adrenal (HPA) axis of which cortisol is the primary glucocorticoid in humans. Synthetic glucocorticoids are important pharmacological agents that augment the anti-inflammatory and immunosuppressive properties of endogenous cortisol and are widely used for the treatment of asthma, Crohn's disease, and rheumatoid arthritis, amongst other chronic conditions. The homeostatic activity of cortisol is disrupted by the administration of synthetic glucocorticoids and so there is interest in developing treatment options that minimize HPA axis disturbance while maintaining the pharmacological effects. Studies suggest that optimizing drug administration time can achieve this goal. The present review provides an overview of endogenous glucocorticoid activity and recent advances in treatment options that have further improved patient safety and efficacy with an emphasis on chronopharmacology.

Pharmacokinetics and Bioavailability Study of a Prednisolone Tablet as a Single Oral Dose in Bangladeshi Healthy Volunteers

The aim of the study was to assess the pharmacokinetic and bioavailability of 2 formulations of 5-mg prednisolone tablets, reference product (Teva UK Limited) and Pred (Eskayef Bangladesh Ltd) as test product. The open-label, randomized, 2-way crossover studies were conducted on 14 healthy subjects. Participants were assigned to receive both products as a single dose (20 mg formulations, 4 × 5 mg tablets) followed by a 2 weeks’ washout period. Following oral administration, samples were obtained at various time intervals and analyzed for prednisolone concentrations using a validated high-performance liquid chromatography assay method with ultraviolet detection. The obtained values for test and reference products were 683.00 ± 94.54 ng/mL and 635.16 ± 125.57 ng/mL for C_max; 2716.54 ± 196.28 ng·h/mL and 2780.5 ± 119.73 ng·h/mL for AUC_0-12; 3284.36 ± 138.12 ng·h/mL and 3317.96 ± 133.95 ng·h/mL for AUC_0-∞, respectively. From the paired Student t test, no significant differences between 2 formulations were observed (P > .05). The 90% confidence intervals of C_max, AUC_0-12, and AUC_0-∞ were found to be 99.0% to 100.9%, 99.4% to 100.5%, and 99.9% to 101.3%, respectively. Finally, it can be concluded that Pred (Test) of Eskayef Bangladesh Ltd and prednisolone (Reference) of Teva UK Limited are bioequivalent and interchangeable.

Prednisolone Delivery Platforms: Capsules and Beads Combination for a Right Timing Therapy

In this work, a platform of alginate beads loaded with Prednisolone in hypromellose/gellan gum capsules (F6/Cps) able to delay steroidal anti-inflammatory drug (SAID) release as needed for chronotherapy of rheumatoid arthritis is proposed. Rheumatoid arthritis, showing a worsening in symptoms in the morning upon waking, is a pathology that can benefit from chronotherapy. With the aim to maximize prednisolone therapeutic action allowing the right timing of glucocorticoid therapy, different engineered microparticles (gel-beads) were manufactured using prilling (laminar jet break-up) as micro-encapsulation technique and Zn-alginate as gastroresistant carrier. Starting from various feed solutions and process parameters, the effect of the variables on particles size, morphology, solid state properties and drug release was studied. The optimization of operative and prilling/ionotropic gelation variables led to microspheres with almost spherical shape and a narrow dimensional range. The feed solution with the highest alginate (2.5% w/v) amount and drug/polymer ratio (1:5 w/w) gave rise to the highest encapsulation efficiency (78.5%) as in F6 formulation. As to drug release, F6 exhibited an interesting dissolution profile, releasing about 24% of the drug in simulated gastric fluid followed by a more sustained profile in simulated intestinal fluid. #F6, acting as a gastro-resistant and delayed release formulation, was selected for in vivo studies on male Wistar rats by means of a carrageenan-induced oedema model. Finally, this efficacious formulation was used as core material for the development of a final dosage form: F6/Cps allowed to significantly reduce prednisolone release in simulated gastric fluid (12.6%) and delayed drug release up to about 390 minutes.

Comparison of the influence of cyclosporine and tacrolimus on the pharmacokinetics of prednisolone in adult male kidney transplant recipients

BACKGROUND AND OBJECTIVE

Cyclosporine has been observed to precipitate cushingoid features in kidney transplant recipients already on prednisolone. Some pharmacokinetic studies have demonstrated increased prednisolone exposure in patients on cyclosporine therapy compared with azathioprine, whereas other studies have found no difference. The objective of this study was to determine whether cyclosporine impacts on prednisolone exposure as compared with tacrolimus.

METHODS

Adult male kidney transplant recipients treated with prednisolone and either cyclosporine or tacrolimus were recruited for pharmacokinetic blood sampling at the outpatient clinic at the Princess Alexandra Hospital, Brisbane, Australia. Prednisolone plasma concentrations were determined using ultra-high-performance liquid chromatography. Dose-adjusted area under the plasma concentration-time curve (AUC) of free and total prednisolone was estimated using a previously developed limited sampling strategy and non-compartmental analysis.

RESULTS

A total of 55 patients were eligible for analysis; 38 % received cyclosporine and 62 % received tacrolimus co-therapy. No significant difference in mean dose-adjusted total prednisolone AUC from 0 to 6 h post-dose or mean dose-adjusted free prednisolone AUC from 0 to 12 h was observed between the cyclosporine and tacrolimus groups (449 versus 428 nmol·h/L/mg, p = 0.43, and 32 versus 30 nmol·h/L/mg, p = 0.51, respectively).

CONCLUSION

Cyclosporine does not change the dose-adjusted exposure of prednisolone compared with tacrolimus. Adult kidney transplant recipients can therefore continue on their usual prednisolone dose when changing therapy between cyclosporine and tacrolimus.

Significance of metabolites in bioequivalence: losartan potassium as a case study

Estimation of metabolite data as a supportive evidence of comparable therapeutic outcome is recommended by various guidance documents. However, a consensus on using it solely to establish bioequivalence (BE) is lacking as parent drug is believed to detect pharmacokinetic differences between test and reference formulations better. Four BE studies of losartan potassium reported in the literature are reviewed. In all the four studies, 90% confidence intervals (CIs) of geometric mean ratios of the test and reference formulations for maximum blood drug concentration (Cmax ) of losartan potassium were outside the acceptable range of 80%-125%, whereas, 90% CIs for its active metabolite, losartan carboxylic acid (LCA), were within the acceptance criteria. Although BE with respect to area under the plasma concentration versus time profile curve was demonstrated in all the cases, BE with respect to Cmax could not be established. However, marketing authorization in all the four cases was granted based on scientific evidence that LCA is 10-40 times more potent than losartan, LCA exhibited higher plasma concentration levels than losartan, pharmacodynamic effects correlate with LCA, and losartan shows wide therapeutic index. Further, widened CI limits for losartan were accepted. Losartan presents an opportunity in the diligence of the principles of quality risk management for selecting moiety on which BE decision must be based.

The impact of the EMA change in definition of "dose" on the BCS dose-solubility ratio: a review of the biowaiver monographs

The Biopharmaceutics Classification System (BCS) defines the solubility characteristics of an active pharmaceutical substance based on its dose-solubility ratio: for highly soluble drugs this ratio is less than 250 mL over a defined pH range. Prior to the revision of the European Medicines Agency (EMA, formerly EMEA) guideline in 2010, the "dose" in this ratio was consistently defined by the US FDA, the EMA, and the WHO biowaiver guidelines as the highest dosage strength. However, in the revised EMA guideline, the dose is defined as the highest single dose administered according to the Summary of Product Characteristics. The new EMA criterion for highly soluble may be closer to the actual conditions of use, but it is not in line with the dose that would be used in the in vivo bioequivalence study. This paper evaluates the impact on the BCS classification of the active pharmaceutical ingredients of the published biowaiver monographs and discusses the consequences of the possible change in classification on biowaiver recommendations. Using the current definition of dose by the EMA, the biowaiver recommendations for metoclopramide hydrochloride and verapamil hydrochloride are no longer valid according to EMA criteria. For prednisolone and prednisone, a reevaluation of the biowaiver recommendation, taking into account the usual dosing levels, seems appropriate.

Biowaiver monographs for immediate release solid oral dosage forms: mefloquine hydrochloride

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release solid oral dosage forms containing mefloquine hydrochloride as the only active pharmaceutical ingredient (API) are reviewed. The solubility and permeability data of mefloquine hydrochloride as well as its therapeutic use and therapeutic index, its pharmacokinetic properties, data related to the possibility of excipient interactions and reported BE/bioavailability studies were taken into consideration. Mefloquine hydrochloride is not a highly soluble API. Since no data on permeability are available, it cannot be classified according to the Biopharmaceutics Classification System with certainty. Additionally, several studies in the literature failed to demonstrate BE of existing products. For these reasons, the biowaiver cannot be justified for the approval of new multisource drug products containing mefloquine hydrochloride. However, scale-up and postapproval changes (HHS-FDA SUPAC) levels 1 and 2 and most EU type I variations may be approvable without in vivo BE, using the dissolution tests described in these regulatory documents.

Cellulose-based matrix microspheres of prednisolone inclusion complex: preparation and characterization

The purpose of the present investigation was to encapsulate pure prednisolone (PRD) and PRD-hydroxypropyl-β-cyclodextrin (HPβCD) complex in cellulose-based matrix microspheres. The system simultaneously exploits complexation technique to enhance the solubility of low-solubility drug (pure PRD) and subsequent modulation of drug release from microspheres (MIC) at a predetermined time. The microspheres of various compositions were prepared by an oil-in-oil emulsion-solvent evaporation method. The effect of complexation and presence of cellulose polymers on entrapment efficiency, particle size, and drug release had been investigated. The solid-state characterization was performed by Fourier transform infrared spectroscopy, thermogravimetry, differential scanning calorimetry, and powder X-ray diffractometry. The morphology of MIC was examined by scanning electron microscopy. The in vitro drug release profiles from these microspheres showed the desired biphasic release behavior. After enhancing the solubility of prednisolone by inclusion into HPβCD, the drug release was easily modified in the microsphere formulation. It was also demonstrated that the CDs in these microspheres were able to modulate several properties such as morphology, drug loading, and release properties. The release kinetics of prednisolone from microspheres followed quasi-Fickian and first-order release mechanisms. In addition to this, the f (2)-metric technique was used to check the equivalency of dissolution profiles of the optimized formulation before and after stability studies, and it was found to be similar. A good outcome, matrix microspheres (coded as MIC5) containing PRD-HPβCD complex, showed sustained release of drug (95.81%) over a period of 24 h.

Solid dispersion of prednisolone: solid state characterization and improvement of dissolution profile

BACKGROUND

Dissolution testing is an important test for judging the effectiveness of a pharmaceutical dosage form. Many drugs create adverse effect because of insufficient solubility at the physiological pH. This study is aimed to improve the dissolution properties of prednisolone (PRD) that falls under the category of class II biopharmaceutics system.

METHODS

In this study, preparation of solid dispersions with various water-soluble carriers was studied to improve the dissolution of PRD. To obtain the optimized formulation, solid dispersions were prepared employing different methods using different carriers with various drug:carrier ratios. Their dissolution behaviors were also compared. Fourier transform infrared (FTIR) spectroscopy, powder X-ray diffraction, and thermal analysis were studied to characterize the prepared solid dispersion.

RESULTS

PRD formed stable complexes with carriers as indicated by the stability constants (K(a)) of 9.5-597.2 M(-1). The results indicated that in vitro dissolution rate of PRD was remarkably improved in the solid dispersion of the drug compared with physical mixture and drug alone. This can be attributed to improved wettability, dispersibility, decrease in crystallinity, and increase in amorphous fraction of the drug. The results obtained from Fourier transform infrared spectroscopy and powder X-ray diffraction showed good evidence of drug-carrier interaction while using carriers such as hydroxypropyl-β-cyclodextrin (HP-βCD) and polyethylene glycol (PEG). Crystallinity of the drug was reduced in the solid dispersions prepared with hydroxypropyl-β-cyclodextrin, polyvinylpyrrolidone-co-vinyl acetate 64, and PEG as revealed from the differential scanning calorimetry thermograms.

CONCLUSION

The results suggested that the solid dispersion with selected excipients is a powerful tool to accelerate the dissolution of poorly water-soluble drugs.

Biowaiver monographs for immediate release solid oral dosage forms: rifampicin

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of new multisource and reformulated immediate release (IR) solid oral dosage forms containing rifampicin as the only Active Pharmaceutical Ingredient (API) are reviewed. Rifampicin's solubility and permeability, its therapeutic use and index, pharmacokinetics, excipient interactions and reported BE/bioavailability (BA) problems were taken into consideration. Solubility and absolute BA data indicate that rifampicin is a BCS Class II drug. Of special concern for biowaiving is that many reports of failure of IR solid oral dosage forms of rifampicin to meet BE have been published and the reasons for these failures are yet insufficiently understood. Moreover, no reports were identified in which in vitro dissolution was shown to be predictive of nonequivalence among products. Therefore, a biowaiver based approval of rifampicin containing IR solid oral dosage forms cannot be recommended for either new multisource drug products or for major scale-up and postapproval changes (variations) to existing drug products.

Biowaiver monographs for immediate release solid oral dosage forms: diclofenac sodium and diclofenac potassium

Literature data are reviewed regarding the scientific advisability of allowing a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing either diclofenac potassium and diclofenac sodium. Within the biopharmaceutics classification system (BCS), diclofenac potassium and diclofenac sodium are each BCS class II active pharmaceutical ingredients (APIs). However, a biowaiver can be recommended for IR drug products of each salt form, due to their therapeutic use, therapeutic index, pharmacokinetic properties, potential for excipient interactions, and performance in reported BE/bioavailability (BA) studies, provided: (a) test and comparator contain the same diclofenac salt; (b) the dosage form of the test and comparator is identical; (c) the test product contains only excipients present in diclofenac drug products approved in ICH or associated countries in the same dosage form, for instance as presented in this paper; (d) test drug product and comparator dissolve 85% in 30 min or less in 900 mL buffer pH 6.8, using the paddle apparatus at 75 rpm or the basket apparatus at 100 rpm; and (e) test product and comparator show dissolution profile similarity in pH 1.2, 4.5, and 6.8.

Application of gastrointestinal simulation for extensions for biowaivers of highly permeable compounds

The goal of this study was to apply gastrointestinal simulation technology and integration of physiological parameters to predict biopharmaceutical drug classification. GastroPlus was used with experimentally determined physicochemical and pharmacokinetic drug properties to simulate the absorption of several weak acid and weak base BCS class II compounds. Simulation of oral drug absorption given physicochemical drug properties and physicochemical parameters will aid justification of biowaivers for selected BCS class II compounds.

Biowaiver Monographs for Immediate Release Solid Oral Dosage Forms: Ethambutol Dihydrochloride**This paper reflects the scientific opinion of the authors and not the policies of regulating agencies.**A project of the International Pharmaceutical Federation FIP, Groupe BCS, http://www.fip.org/bcs

Literature data relevant to the decision to allow a waiver of in vivo bioequivalence (BE) testing for the approval of immediate release (IR) solid oral dosage forms containing ethambutol dihydrochloride as the only active pharmaceutical ingredient (API) are reviewed. Ethambutol dihydrochloride is a Biopharmaceutics Classification System (BCS) Class III drug with permeability properties approaching the border between BCS Class I and III. BE problems of ethambutol formulations containing different excipients and different dosages forms have not been reported and hence the risk of bioinequivalence caused by excipients is low. Ethambutol has a narrow therapeutic index related to ocular toxicity. However, as long as the prescribers' information of the test product stipulates the need for regular monitoring of ocular toxicity, the additional patient risk is deemed acceptable. It is concluded that a biowaiver can be recommended for IR solid oral dosage forms provided that the test product (a) contains only excipients present in ethambutol IR solid oral drug products approved in ICH or associated countries, for instance as presented in this paper, (b) complies with the criteria for "very rapidly dissolving" and (c) has a prescribers' information indicating the need for testing the patient's vision prior to initiating ethambutol therapy and regularly during therapy.