Rectal Bioavailability of Amoxicillin from Hollow-Type Suppositories: Effect of Chemical Form of Amoxicillin

Rectal drug administration could offer advantages in the delivery of medicines for children by avoiding swallowability issues, improving stability and enabling administration by caregivers. This study aimed to evaluate the rectal bioavailability of hollow-type suppositories (HTS) and understand the effect of two chemical forms of amoxicillin: amoxicillin sodium (AS) or amoxicillin trihydrate (AMT). HTS were prepared by incorporating a lipophilic core containing the antibiotic with a polyethylene glycol (PEG) shell. Formulations were characterised in vitro, and the absolute bioavailability was determined in a rabbit model, while drug-base interactions were evaluated using X-ray diffraction crystallography (XRD), differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy. The in vitro amoxicillin release from AMT HTS was delayed, taking 27.3 ± 4.9 h to release 50% drug compared with 1.7 h for the AS HTS, likely due to solubility differences between AMT and AS. The presence of orthorhombic AMT and anhydrous AS crystals in respective HTS was confirmed via XRD and DSC. PEG shells were able to protect the drug chemical stability when stored at 25 °C/60% RH. Despite the difference in their in vitro release rates, a similar rectal bioavailability was found in both forms of amoxicillin (absolute bioavailability 68.2 ± 6.6% vs. 72.8 ± 32.2% for AMT HTS and AS HTS, respectively; p = 0.9682). Both HTS formulations showed little or no irritation to the rectal mucosa following a single dose.

Solvatomorph and polymorph screening of clopamide drug and its copper(ii) complex crystals

The anhydrate and hemihydrate structures of the marketed drug, clopamide, are described the first time. Structural landscape of its copper complexes is presented: three polymorphic modifications and an isostructural series of its alcohol clathrates.

Pharmaceutical Hydrates Analysis-Overview of Methods and Recent Advances

This review discusses a set of instrumental and computational methods that are used to characterize hydrated forms of APIs (active pharmaceutical ingredients). The focus has been put on highlighting advantages as well as on presenting some limitations of the selected analytical approaches. This has been performed in order to facilitate the choice of an appropriate method depending on the type of the structural feature that is to be analyzed, that is, degree of hydration, crystal structure and dynamics, and (de)hydration kinetics. The presented techniques include X-ray diffraction (single crystal X-ray diffraction (SCXRD), powder X-ray diffraction (PXRD)), spectroscopic (solid state nuclear magnetic resonance spectroscopy (ssNMR), Fourier-transformed infrared spectroscopy (FT-IR), Raman spectroscopy), thermal (differential scanning calorimetry (DSC), thermogravimetric analysis (TGA)), gravimetric (dynamic vapour sorption (DVS)), and computational (molecular mechanics (MM), Quantum Mechanics (QM), molecular dynamics (MD)) methods. Further, the successful applications of the presented methods in the studies of hydrated APIs as well as studies on the excipients' influence on these processes have been described in many examples.

Orientation-Dependent Proton Relaxation of Water Molecules Trapped in Solids: Crystallites with Long-Lived Magnetization

The longitudinal spin-lattice relaxation properties of water molecules trapped in a static powdered polycrystalline sample of barium chlorate monohydrate are investigated by means of solid-state ¹H NMR spectroscopy. Different portions of the inhomogeneous Pake pattern that are associated with crystallites at different orientations with respect to the external magnetic field show either a mono- or a biexponential recovery. At high field (9.4 T), the chemical shift anisotropy is the main interaction that is responsible for the inhomogeneity of the relaxation rates. A theoretical description of rapid two-site hopping about the H-O-H bisector in the framework of Liouville space agrees very well with the experimental evidence. Numerical simulations predict a distribution of monoexponential time constants associated with individual single-crystal orientations. Overlapping signals give rise to biexponential recovery. This is confirmed experimentally by ¹H NMR spectra of static single crystals.

Recent progress of structural study of polymorphic pharmaceutical drugs

This review considers advances in the understanding of active pharmaceutical ingredient polymorphism since around 2010 mainly from a structural view point, with a focus on twelve model drugs. New polymorphs of most of these drugs have been identified despite that the polymorphism of these old drugs has been extensively studied so far. In addition to the conventional modifications of preparative solvents, temperatures, and pressure, more strategic structure-based methods have successfully yielded new polymorphs. The development of analytical techniques, including X-ray analyses, spectroscopy, and microscopy has facilitated the identification of unknown crystal structures and also the discovery of new polymorphs. Computational simulations have played an important role in explaining and predicting the stability order of polymorphs. Furthermore, these make significant contributions to the design of new polymorphs by considering structure and energy. The new technologies and insights discussed in this review will contribute to the control of polymorphic forms, both during manufacture and in the drug formulation.

Gelation or crystallization? Subtle balance of structural factors for assembly of DBA derivatives with methyl esters

The aggregation of a series of strained dehydrobenzoannulene derivatives with methyl ester groups is revealed.

Strategies to address low drug solubility in discovery and development

Drugs with low water solubility are predisposed to low and variable oral bioavailability and, therefore, to variability in clinical response. Despite significant efforts to "design in" acceptable developability properties (including aqueous solubility) during lead optimization, approximately 40% of currently marketed compounds and most current drug development candidates remain poorly water-soluble. The fact that so many drug candidates of this type are advanced into development and clinical assessment is testament to an increasingly sophisticated understanding of the approaches that can be taken to promote apparent solubility in the gastrointestinal tract and to support drug exposure after oral administration. Here we provide a detailed commentary on the major challenges to the progression of a poorly water-soluble lead or development candidate and review the approaches and strategies that can be taken to facilitate compound progression. In particular, we address the fundamental principles that underpin the use of strategies, including pH adjustment and salt-form selection, polymorphs, cocrystals, cosolvents, surfactants, cyclodextrins, particle size reduction, amorphous solid dispersions, and lipid-based formulations. In each case, the theoretical basis for utility is described along with a detailed review of recent advances in the field. The article provides an integrated and contemporary discussion of current approaches to solubility and dissolution enhancement but has been deliberately structured as a series of stand-alone sections to allow also directed access to a specific technology (e.g., solid dispersions, lipid-based formulations, or salt forms) where required.

Pharmaceutical cocrystals: the coming wave of new drug substances

Solid crystalline phases containing two cocrystallized components offer a new development pathway whereby one can potentially improve the physical characteristics (i.e., equilibrium solubility, dissolution rate, solid-state stability, etc.) of a drug substance that exhibits a profile that is less than desirable. In this commentary, the topic of pharmaceutical cocrystals will be briefly explored, and a short exposition of the solubility and dissolution rate advantages that have been realized in various systems will be provided. The Guidance for Industry document recently proposed by United States Food and Drug Administration will be outlined, and its requirements explained. Finally, the subset of pharmaceutical cocrystals that consist of a drug substance and a salt of that substance (termed a salt cocrystal) will be examined to illustrate this additional class of pharmaceutical cocrystals that may offer significant scientific and regulatory advantages.

Potential of synchrotron X-ray powder diffractometry for detection and quantification of small amounts of crystalline drug substances in pharmaceutical tablets

The purpose of this study was to develop a sensitive system for detection of crystalline drug substances in intact pharmaceutical tablets by X-ray powder diffractometry (XRPD), using synchrotron X-rays. Fenoprofen calcium dihydrate was used as a model compound. The wavelength and path length of X-rays from synchrotron radiation were optimized in order to maximize the potential of the synchrotron radiation. The optimum wavelength and path length for the measurement of fenoprofen calcium dihydrate were found to be 0.69817 Å and 6.0 mm, respectively, based on theoretical calculations. Under the optimized conditions, a limit of quantification of 0.05% (RSD=9.4%, n=3) and a limit of detection of 0.02% (RSD=17.3%, n=3), results which are approximately 10² times as sensitive as those obtained using conventional XRPD instruments, were achieved. The technique was also applied to fenoprofen calcium dihydrate detection in intact film-coated tablets, which contained Ti in the coating film, and a limit of detection of 0.02% was again attained.

Solvatomorphism in (E)-2-(2,6-dichloro-4-hydroxybenzylidene)hydrazinecarboximidamide

The structures of orthorhombic (E)-4-(2-{[amino(iminio)methyl]amino}vinyl)-3,5-dichlorophenolate dihydrate, C(8)H(8)Cl(2)N(4)O·2H(2)O, (I), triclinic (E)-4-(2-{[amino(iminio)methyl]amino}vinyl)-3,5-dichlorophenolate methanol disolvate, C(8)H(8)Cl(2)N(4)O·2CH(4)O, (II), and orthorhombic (E)-amino[(2,6-dichloro-4-hydroxystyryl)amino]methaniminium acetate, C(8)H(9)Cl(2)N(4)O(+)·C(2)H(3)O(2)(-), (III), all crystallize with one formula unit in the asymmetric unit, with the molecule in an E configuration and the phenol H atom transferred to the guanidine N atom. Although the molecules of the title compounds form extended chains via hydrogen bonding in all three forms, owing to the presence of different solvent molecules, those chains are connected differently in the individual forms. In (II), the molecules are all coplanar, while in (I) and (III), adjacent molecules are tilted relative to one another to varying degrees. Also, because of the variation in hydrogen-bond-formation ability of the solvents, the hydrogen-bonding arrangements vary in the three forms.

Determination of the crystal structure of nifedipine form C by synchrotron powder diffraction

The crystal structure of the metastable form C polymorph of nifedipine [C17H18N2O6, 3,5-dimethyl 2,6-dimethyl-4-(2-nitrophenyl)-1,4-dihydropyridine-3,5-dicarboxylate] was determined by means of direct-space techniques applied to high-resolution synchrotron powder diffraction data. The polymorph crystallizes in the space group P\bar 1 and exhibits a molecular packing significantly different from that of the stable modification, with molecules aligned in an orthogonal configuration inside the unit cell. The molecular conformation, on the other hand, remains substantially unmodified between the two polymorphs. Additionally, in situ thermal characterization of nifedipine crystallization behaviour was performed, confirming the nucleation of another metastable polymorph (form B) prior to the complete crystallization of the stable modification. A complete structural characterization of form B was not possible owing to its very limited stability interval.

Assignment of the vibrational spectra of lithium hydroxide monohydrate, LiOH·H2O

The assignment of the vibrational spectra of lithium hydroxide monohydrate, LiOH·H(2)O, has been controversial for more than half-a-century. Here we show that only the combination of all three forms of vibrational spectroscopy: infrared, Raman and inelastic neutron scattering spectroscopies coupled with periodic-density functional theory calculations is able to satisfactorily assign the spectra. All previous work based on empirical criteria is, at least partially, incorrect. The librational modes of water do not follow the expected rock > wag > twist order and the calculations indicate that complete or partial deuterium substitution would not be useful in assigning the modes.