A review of implantable intravitreal drug delivery technologies for the treatment of posterior segment eye diseases

Development of puerarin-loaded poly(lactic acid) microspheres for sustained ocular delivery: In vitro/vivo evaluation

Diabetic retinopathy, an ocular complication of diabetes, is an important cause of blindness in adults. Puerarin is considered to have promising potential for clinical use in treating diabetic retinopathy. In this study, we designed a novel puerarin-loaded poly(lactic acid) sustained-release microspheres suitable for ocular administration, and we assessed itsin vitro and in vivo properties. The preparation of puerarin-loaded microspheres was optimized by Box-Behnken response surface design. The encapsulation efficiency and drug loading of microspheres were 35.71% and 3.85%, respectively. The microspheres exhibited good dispersion and high safety, making it suitable for ocular drug delivery. In vitro release demonstrated that microspheres had a well-sustained release effectiveness, and its release behavior complied with the zero-order kinetic characteristics. The results of ocular tissue distribution revealed that the CmaxandAUC0-∞ of the microspheres group in the retina and choroid were considerably higher than those of the solution group and the intravenous injection group. This research revealed that intravitreal injection of microspheres can significantly prolong the half-life of puerarin in eye tissues and achieve sustained drug release. Therefore, intravitreal injection of microspheres has positive implications for the treatment of diabetic retinopathy.

Mathematical Models of Ocular Drug Delivery

Drug delivery is an important factor for the success of ocular drug treatment. However, several physical, biochemical, and flow-related barriers limit drug exposure of anterior and posterior ocular target tissues during drug treatment via topical, subconjunctival, intravitreal, or systemic routes. Mathematical models encompass various barriers so that their joint influence on pharmacokinetics (PKs) can be simulated in an integrated fashion. The models are useful in predicting PKs and even pharmacodynamics (PDs) of administered drugs thereby fostering development of new drug molecules and drug delivery systems. Furthermore, the models are potentially useful in interspecies translation and probing of disease effects on PKs. In this review article, we introduce current modeling methods (noncompartmental analyses, compartmental and physiologically based PK models, and finite element models) in ocular PKs and related drug delivery. The roles of top-down models and bottom-up simulations are discussed. Furthermore, we present some future challenges, such as modeling of intra-tissue distribution, prediction of drug responses, quantitative systems pharmacology, and possibilities of artificial intelligence.

Long-Term Follow-up of Patients With Cytomegalovirus Retinitis Treated With a Ganciclovir Implant

Purpose: To assess the long-term safety and clinical outcomes of a ganciclovir intravitreal implant in patients with cytomegalovirus (CMV) retinitis. Methods: A retrospective study was performed of patients with CMV retinitis treated with a ganciclovir intravitreal implant. Results: The study included 13 patients (16 eyes) previously treated with a ganciclovir intravitreal implant. The mean time since the last implant placement was 21.3 years and the mean total duration of follow-up, 22.7 years. Visual acuity (VA) ranged from 20/25 to light perception, with 56% of eyes maintaining a VA of 20/60 or better at the most recent follow-up examination. Common ocular complications included epiretinal membrane (38%), macular fibrosis/scarring (25%), retinal detachment (RD) (25%), implant dislocation (25%), and immune reactivation uveitis (19%). Intraocular surgery was required in 10 eyes (63%), with the most frequent being cataract extraction (31%), pars plana vitrectomy (PPV) for implant removal (19%), and PPV for RD (13%). Conclusions: Results show the long-term safety of the ganciclovir intravitreal implant despite its residual inactive inert shell. Complication rates are consistent with those expected from infectious sequelae.

Encapsulated cell technology: Delivering cytokines to treat posterior ocular diseases

Encapsulated cell technology (ECT) is a targeted delivery method that uses the genetically engineered cells in semipermeable polymer capsules to deliver cytokines. Thus far, ECT has been extensively utilized in pharmacologic research, and shows enormous potentials in the treatment of posterior segment diseases. Due to the biological barriers within the eyeball, it is difficult to attain effective therapeutic concentration in the posterior segment through topical administration of drug molecules. Encouragingly, therapeutic cytokines provided by ECT can cross these biological barriers and achieve sustained release at the desired location. The encapsulation system uses permeable materials that allow growth factors and cytokines to diffuse efficiently into retinal tissue. Moreover, the ECT based treatment can be terminated timely when we need to retrieve the implant, which makes the therapy reversible and provides a safer alternative for intraocular gene therapy. Meanwhile, we also place special emphasis on optimizing encapsulation materials and enhancing preservation techniques to achieve the stable release of growth factors and cytokines in the eyeball. This technology holds great promise for the treatment of patients with dry AMD, RP, glaucoma and MacTel. These findings would enrich our understandings of ECT and promote its future applications in treatment of degenerative retinopathy. This review comprises articles evaluating the exactness of artificial intelligence-based formulas published from 2000 to March 2024. The papers were identified by a literature search of various databases (PubMed/MEDLINE, Google Scholar, Cochrane Library and Web of Science).

Vesicular Drug Delivery Systems: Promising Approaches in Ocular Drug Delivery

Ocular drug delivery poses unique challenges due to the complex anatomical and physiological barriers of the eye. Conventional dosage forms often fail to achieve optimal therapeutic outcomes due to poor bioavailability, short retention time, and off-target effects. In recent years, vesicular drug delivery systems have emerged as promising solutions to address these challenges. Vesicular systems, such as liposome, niosome, ethosome, transfersome, and others (bilosome, transethosome, cubosome, proniosome, chitosome, terpesome, phytosome, discome, and spanlastics), offer several advantages for ocular drug delivery. These include improved drug bioavailability, prolonged retention time on the ocular surface, reduced systemic side effects, and protection of drugs from enzymatic degradation and dilution by tears. Moreover, vesicular formulations can be engineered for targeted delivery to specific ocular tissues or cells, enhancing therapeutic efficacy while minimizing off-target effects. They also enable the encapsulation of a wide range of drug molecules, including hydrophilic, hydrophobic, and macromolecular drugs, and the possibility of combination therapy by facilitating the co-delivery of multiple drugs. This review examines vesicular drug delivery systems, their advantages over conventional drug delivery systems, production techniques, and their applications in management of ocular diseases.

Current Insights into Targeting Strategies for the Effective Therapy of Diseases of the Posterior Eye Segment

The eye is one a unique sophisticated human sense organ with a complex anatomical structure. It is encased by variety of protective barriers as responsible for vision. There has been a paradigm shift in the prevalence of several major vision threatening ocular conditions with enhanced reliance on computer-based technologies in our workaday life and work-from-home modalities although aging, pollution, injury, harmful chemicals, lifestyle changes will always remain the root cause. Treating posterior eye diseases is a challenge faced by clinicians worldwide. The clinical use of conventional drug delivery systems for posterior eye targeting is restricted by the ocular barriers. Indeed, for overcoming various ocular barriers for efficient delivery of the therapeutic moiety and prolonged therapeutic effect requires prudent and target-specific approaches. Therefore, for efficient drug delivery to the posterior ocular segment, advancements in the development of sustained release and nanotechnology-based ocular drug delivery systems have gained immense importance. Therapeutic efficacy and patient compliance are of paramount importance in clinical translation of these investigative drug delivery systems. This review provides an insight into the various strategies employed for improving the treatment efficacies of the posterior eye diseases. Various drug delivery systems such as systemic and intraocular injections, implants have demonstrated promising outcomes, along with that they have also exhibited side-effects, limitations and strategies employed to overcome them are discussed in this review. The application of artificial intelligence-based technologies along with an appreciation of disease, delivery systems, and patient-specific outcomes will likely enable more effective therapy for targeting the posterior eye segment.

Experimental and mathematical approaches for drug delivery for the treatment of wet age-related macular degeneration

Several chronic eye diseases affect the posterior segment of the eye. Among them age-related macular degeneration can cause vision loss if left untreated and is one of the leading causes of visual impairment in the world. Most treatments are based on intravitreally injected therapeutics that inhibit the action of vascular endothelial growth factor. However, due to the need for monthly injections, this method is associated with poor patient compliance. To address this problem, numerous drug delivery systems (DDSs) have been developed. This review covers a selection of particulate systems, non-stimuli responsive hydrogels, implants, and composite systems that have been developed in the last few decades. Depending on the type of DDS, polymer material, and preparation method, different mechanical properties and drug release profiles can be achieved. Furthermore, DDS development can be optimized by implementing mathematical modeling of both drug release and pharmacokinetic aspects. Several existing mathematical models for diffusion-controlled, swelling-controlled, and erosion-controlled drug delivery from polymeric systems are summarized. Compartmental and physiologically based models for ocular drug transport and pharmacokinetics that have studied drug concentration profiles after intravitreal delivery or release from a DDS are also reviewed. The coupling of drug release models with ocular pharmacokinetic models can lead to obtaining much more efficient DDSs for the treatment of age-related macular degeneration and other diseases of the posterior segment of the eye.

Polymer- and lipid-based nanocarriers for ocular drug delivery: Current status and future perspectives

Ocular diseases seriously affect patients' vision and life quality, with a global morbidity of over 43 million blindness. However, efficient drug delivery to treat ocular diseases, particularly intraocular disorders, remains a huge challenge due to multiple ocular barriers that significantly affect the ultimate therapeutic efficacy of drugs. Recent advances in nanocarrier technology offer a promising opportunity to overcome these barriers by providing enhanced penetration, increased retention, improved solubility, reduced toxicity, prolonged release, and targeted delivery of the loaded drug to the eyes. This review primarily provides an overview of the progress and contemporary applications of nanocarriers, mainly polymer- and lipid-based nanocarriers, in treating various eye diseases, highlighting their value in achieving efficient ocular drug delivery. Additionally, the review covers the ocular barriers and administration routes, as well as the prospective future developments and challenges in the field of nanocarriers for treating ocular diseases.

Development of a new surgical technique to infuse kynurenic acid to optic nerves in chickens for studying loss of myelination

Prolonged infusion of a high dose of kynurenic acid (KYNA) reduces the myelin content in the rat spinal cord with preservation of the axonal integrity and without inducing an inflammatory response. We hypothesized that subdural infusion of a high concentration of KYNA can induce myelin loss in the optic nerves (ONs) of chickens. However, existing methods to deliver agents to the ON are inefficient, unlocalized and provide only acute exposure. Thus, we developed a surgical approach for sustained delivery of KYNA to the chicken ON. In brief, the novel surgical technique, which does not include excision of the extraocular muscles, involves incision of the skin and underlying fascial sheath to access the optic nerve within the muscle cone, implantation of a catheter in the dura of the optic nerve, the other end of which exits the orbit under the skin. The catheter runs under the skin near the lateral canthus, over the ears to the back of the neck, where a second incision is made to both implant the osmotic pump and to attach the catheter to the osmotic pump. India ink was used to confirm prolonged sustained administration to the optic nerves and across the chiasm. This surgical model was used to investigate KYNA's effect(s) on myelin loss in the ON. ONs of 7-day old chickens were infused with 50 mM KYNA or phosphate buffered saline (PBS) for seven days. Analysis of KYNA-infused contralateral ON g-ratios and protein levels indicated a reduction in myelin. These findings demonstrate the utility of our surgical approach for sustained delivery of KYNA into the ON and suggest a role for KYNA in modulating CNS myelination.

Recent Fabrication Methods to Produce Polymer-Based Drug Delivery Matrices (Experimental and In Silico Approaches)

The study of novel drug delivery systems represents one of the frontiers of the biomedical research area. Multi-disciplinary scientific approaches combining traditional or engineered technologies are used to provide major advances in improving drug bioavailability, rate of release, cell/tissue specificity and therapeutic index. Biodegradable and bio-absorbable polymers are usually the building blocks of these systems, and their copolymers are employed to create delivery components. For example, poly (lactic acid) or poly (glycolic acid) are often used as bricks for the production drug-based delivery systems as polymeric microparticles (MPs) or micron-scale needles. To avoid time-consuming empirical approaches for the optimization of these formulations, in silico-supported models have been developed. These methods can predict and tune the release of different drugs starting from designed combinations. Starting from these considerations, this review has the aim of investigating recent approaches to the production of polymeric carriers and the combination of in silico and experimental methods as promising platforms in the biomedical field.

Drug Delivery Challenges and Current Progress in Nanocarrier-Based Ocular Therapeutic System

Drug instillation via a topical route is preferred since it is desirable and convenient due to the noninvasive and easy drug access to different segments of the eye for the treatment of ocular ailments. The low dose, rapid onset of action, low or no toxicity to the local tissues, and constrained systemic outreach are more prevalent in this route. The majority of ophthalmic preparations in the market are available as conventional eye drops, which rendered <5% of a drug instilled in the eye. The poor drug availability in ocular tissue may be attributed to the physiological barriers associated with the cornea, conjunctiva, lachrymal drainage, tear turnover, blood-retinal barrier, enzymatic drug degradation, and reflex action, thus impeding deeper drug penetration in the ocular cavity, including the posterior segment. The static barriers in the eye are composed of the sclera, cornea, retina, and blood-retinal barrier, whereas the dynamic barriers, referred to as the conjunctival and choroidal blood flow, tear dilution, and lymphatic clearance, critically impact the bioavailability of drugs. To circumvent such barriers, the rational design of the ocular therapeutic system indeed required enriching the drug holding time and the deeper permeation of the drug, which overall improve the bioavailability of the drug in the ocular tissue. This review provides a brief insight into the structural components of the eye as well as the therapeutic challenges and current developments in the arena of the ocular therapeutic system, based on novel drug delivery systems such as nanomicelles, nanoparticles (NPs), nanosuspensions, liposomes, in situ gel, dendrimers, contact lenses, implants, and microneedles. These nanotechnology platforms generously evolved to overwhelm the troubles associated with the physiological barriers in the ocular route. The controlled-drug-formulation-based strategic approach has considerable potential to enrich drug concentration in a specific area of the eye.

Targeting Ocular Drug Delivery: An Examination of Local Anatomy and Current Approaches

Ocular drug delivery remains the focus of much modern research. Primary routes of administration include the surface, the intravitreal space, the subretinal space, and the subconjunctival space, each with its own series of unique challenges, limitations, and advantages. Each of these approaches requires careful consideration of the local anatomy, physical barriers, and key cells as well as the interface between the anatomy and the drug or drug system being delivered. While least invasive, the topical route poses a challenge with the many physical barriers that prevent drug penetration into the eye; while injection into the intravitreal, subretinal, and subconjunctival spaces are direct and targeted but limited due to the many internal clearance mechanisms and potential for damage to the eye. Polymeric-based, sustained-release drug delivery systems have been identified as a potential solution to many of these challenges; however, the design and successful implementation of a sustained-release system that is well-tolerated, bioactive, biocompatible, and degradable remains, in many cases, only in the early stages. The drugs and biomaterials in question also require special attention as small chemical changes could result in vastly different outcomes. This paper explores the anatomy and key cells of these four primary drug delivery routes as well as the interface between drug and drug delivery systems and the anatomy, reviewing the recent developments and current state of research in each area. Finally, this paper also examines the frequently used drugs and biomaterials found in ocular drug delivery and summarizes the primary interactions observed.

Application of an organotypic ocular perfusion model to assess intravitreal drug distribution in human and animal eyes

Intravitreal (ITV) drug delivery is a new cornerstone for retinal therapeutics. Yet, predicting the disposition of formulations in the human eye remains a major translational hurdle. A prominent, but poorly understood, issue in pre-clinical ITV toxicity studies is unintended particle movements to the anterior chamber (AC). These particles can accumulate in the AC to dangerously raise intraocular pressure. Yet, anatomical differences, and the inability to obtain equivalent human data, make investigating this issue extremely challenging. We have developed an organotypic perfusion strategy to re-establish intraocular fluid flow, while maintaining homeostatic pressure and pH. Here, we used this approach with suitably sized microbeads to profile anterior and posterior ITV particle movements in live versus perfused porcine eyes, and in human donor eyes. Small-molecule suspensions were then tested with the system after exhibiting differing behaviours in vivo. Aggregate particle size is supported as an important determinant of particle movements in the human eye, and we note these data are consistent with a poroelastic model of bidirectional vitreous transport. Together, this approach uses ocular fluid dynamics to permit, to our knowledge, the first direct comparisons between particle behaviours from human ITV injections and animal models, with potential to speed pre-clinical development of retinal therapeutics.

Compartmental and COMSOL Multiphysics 3D Modeling of Drug Diffusion to the Vitreous Following the Administration of a Sustained-Release Drug Delivery System

The purpose of this study was to examine antibiotic drug transport from a hydrogel drug delivery system (DDS) using a computational model and a 3D model of the eye. Hydrogel DDSs loaded with vancomycin (VAN) were synthesized and release behavior was characterized in vitro. Four different compartmental and four COMSOL models of the eye were developed to describe transport into the vitreous originating from a DDS placed topically, in the subconjunctiva, subretinally, and intravitreally. The concentration of the simulated DDS was assumed to be the initial concentration of the hydrogel DDS. The simulation was executed over 1500 and 100 h for the compartmental and COMSOL models, respectively. Based on the MATLAB model, topical, subconjunctival, subretinal and vitreous administration took most (~500 h to least (0 h) amount of time to reach peak concentrations in the vitreous, respectively. All routes successfully achieved therapeutic levels of drug (0.007 mg/mL) in the vitreous. These models predict the relative build-up of drug in the vitreous following DDS administration in four different points of origin in the eye. Our model may eventually be used to explore the minimum loading dose of drug required in our DDS leading to reduced drug use and waste.

Additive manufacturing in drug delivery: Innovative drug product design and opportunities for industrial application

Additive manufacturing (AM) or 3D printing is enabling new directions in product design. The adoption of AM in various industrial sectors has led to major transformations. Similarly, AM presents new opportunities in the field of drug delivery, opening new avenues for improved patient care. In this review, we discuss AM as an innovative tool for drug product design. We provide a brief overview of the different AM processes and their respective impact on the design of drug delivery systems. We highlight several enabling features of AM, including unconventional release, customization, and miniaturization, and discuss several applications of AM for the fabrication of drug products. This includes products that have been approved or are in development. As the field matures, there are also several new challenges to broad implementation in the pharmaceutical landscape. We discuss several of these from the regulatory and industrial perspectives and provide an outlook for how these issues may be addressed. The introduction of AM into the field of drug delivery is an enabling technology and many new drug products can be created through productive collaboration of engineers, materials scientists, pharmaceutical scientists, and industrial partners.

Analytical and Computational Modeling of Sustained-Release Drug Implants in the Vitreous Humor

Sustained ocular drug delivery systems are necessary for patients needing regular drug therapy since frequent injection is painful, undesirable, and risky. One type of sustained-release systems includes pellets loaded with the drug, encapsulated in a porous shell that can be injected into the vitreous humor. There the released drug diffuses while the physiological flow of water provides the convective transport. The fluid flow within the vitreous is described by Darcy's equations for the analytical model and Brinkman flow for the computational analysis while the drug transport is given by the classical convection-diffusion equation. Since the timescale for the drug depletion is quite large, for the analytical model, we consider the exterior surrounding the capsule to be quasi-steady and the interior is time dependent. In the vitreous, the fluid-flow process is relatively slow, and meaningful results can be obtained for small Peclet number whereby a perturbation analysis is possible. For an isolated capsule, with approximately uniform flow in the far field around it, the mass-transfer problem requires singular perturbation with inner and outer matching. The computational model, besides accommodating the ocular geometry, allows for a fully time-dependent mass-concentration solution and also admits moderate Peclet numbers. As expected, the release rate diminishes with time as the drug depletion lowers the driving potential. The predictive results are sufficient general for a range of capsule permeability values and are useful for the design of the sustained-release microspheres as to the requisite permeability for specific drugs.

Fouling in ocular devices: implications for drug delivery, bioactive surface immobilization, and biomaterial design

The last 30 years has seen a proliferation of research on protein-resistant biomaterials targeted at designing bio-inert surfaces, which are prerequisite for optimal performance of implantable devices that contact biological fluids and tissues. These efforts have only been able to yield minimal results, and hence, the ideal anti-fouling biomaterial has remained elusive. Some studies have yielded biomaterials with a reduced fouling index among which high molecular weight polyethylene glycols have remained dominant. Interestingly, the field of implantable ocular devices has not experienced an outflow of research in this area, possibly due to the assumption that biomaterials tested in other body fluids can be translated for application in the ocular space. Unfortunately, progression in the molecular understanding of many ocular conditions has brought to the fore the need for treatment options that necessitates the use of anti-fouling biomaterials. From the earliest implanted horsehair and silk seton for glaucoma drainage to the recent mini telescopes for sight recovery, this review provides a concise incursion into the gradual evolution of biomaterials for the design of implantable ocular devices as well as approaches used to overcome the challenges with fouling. The implication of fouling for drug delivery, the design of immune-responsive biomaterials, as well as advanced surface immobilization approaches to support the overall performance of implantable ocular devices are also reviewed.

Fabrication, Optimization, and In Vitro and In Vivo Characterization of Intra-vitreal Implant of Budesonide Generally Made of PHBV

Drug delivery to vitreous in comparison with drug delivery to the other parts of the eye is complicated and challenging due to the existence of various anatomical and physiological barriers. Developing injectable intra-vitreal implant could be beneficial in this regard. Herein, poly(hydroxybutyrate-co-valerate) (PHBV) implants were fabricated and optimized using response surface method for budesonide (BZ) delivery. The acquired implants were characterized in regard to the stability of the ingredients during fabrication process, drug loading amount, and drug release pattern (in PBS-HA-A and in vitreous medium). According to this research and statistical analysis performed, first HV% (hydroxyvalerate) then molecular weight and ratio of PEG as pore former affect respectively release rate and burst strength of BZ with different coefficients. Drug release profile in rabbit eye correlated well with that of in vitro (R² = 0.9861, p ˂ 0.0001). No significant changes were seen in ERG waves, intraocular pressure, and histological studies during the in vivo part of the project. Using 8% HV, 20% PEG/PHBV, and higher molecular weight PEG (i.e., 6000), the optimum formulation was achieved. Toxicity and biocompatibility of the optimized formulation, which were evaluated in vivo, indicated the suitability of design implant for intra-vitreal BZ delivery. Grapical abstract.

Williams G, Brocchini S, Awwad S. Injectables and Depots to Prolong Drug Action of Proteins and Peptides

Proteins and peptides have emerged in recent years to treat a wide range of multifaceted diseases such as cancer, diabetes and inflammation. The emergence of polypeptides has yielded advancements in the fields of biopharmaceutical production and formulation. Polypeptides often display poor pharmacokinetics, limited permeability across biological barriers, suboptimal biodistribution, and some proclivity for immunogenicity. Frequent administration of polypeptides is generally required to maintain adequate therapeutic levels, which can limit efficacy and compliance while increasing adverse reactions. Many strategies to increase the duration of action of therapeutic polypeptides have been described with many clinical products having been developed. This review describes approaches to optimise polypeptide delivery organised by the commonly used routes of administration. Future innovations in formulation may hold the key to the continued successful development of proteins and peptides with optimal clinical properties.

Long-Term Stability of Anti-Vascular Endothelial Growth Factor (a-VEGF) Biologics Under Physiologically Relevant Conditions and Its Impact on the Development of Long-Acting Delivery Systems

The port delivery system with ranibizumab (PDS) is an investigational long-acting drug delivery system for the continuous release of ranibizumab, an anti-VEGF biologic, in the vitreous humor. The efficacy of the PDS implant relies on the maintenance of long-term drug stability under physiological conditions. Herein, the long-term stability of three anti-VEGF biologics - ranibizumab, bevacizumab and aflibercept - was investigated in phosphate buffered saline (PBS) at 37 °C for several months. Comparison of stability profiles shows that bevacizumab and aflibercept are increasingly prone to aggregation whereas ranibizumab undergoes minimal aggregation. Ranibizumab also shows the smallest loss in antigen binding capacity after long-term incubation in PBS. Even though the aggregated forms of bevacizumab and aflibercept bind to VEGF, the consequences of aggregation on immunogenicity, implant function and efficacy are unknown. These results highlight the importance of maintaining long-term drug stability under physiologically relevant conditions which is necessary for achieving efficacy with an in vivo continuous drug delivery device such as the PDS implant.

Ocular prodrugs: Attributes and challenges

Ocular drug delivery is one of the most attention-grabbing and challenging endeavors among the numerous existing drug delivery systems. From a drug delivery point of view, eye is an intricate organ to investigate and explore. In spite of many limitations, advancements have been made with the intention of improving the residence time or permeation of the drug in the ocular region. Poor bioavailability of topically administered drugs is the major issue pertaining to ocular drug delivery. Several efforts have been made towards improving precorneal residence time and corneal penetration, e.g. iontophoresis, prodrugs and ion-pairing, etc. Prodrug approach (chemical approach) has been explored by the formulation scientists to optimize the physicochemical and biochemical properties of drug molecules for improving ocular bioavailability. Formulation of ocular prodrugs is a challenging task as they should exhibit optimum chemical stability as well as enzymatic liability so that they are converted into parent drug after administration at the desired pace. This review will encompass the concept of derivatization and recent academic and industrial advancements in the field of ocular prodrugs. The progression in prodrug designing holds a potential future for ophthalmic drug delivery.

Safety and Biocompatibility of Aflibercept-Loaded Microsphere Thermo-Responsive Hydrogel Drug Delivery System in a Nonhuman Primate Model

Purpose

To evaluate the safety and tolerability of a microsphere thermo-responsive hydrogel drug delivery system (DDS) loaded with aflibercept in a nonhuman primate model.

Methods

A sterile 50 µL of aflibercept-loaded microsphere thermo-responsive hydrogel-DDS (aflibercept-DDS) was injected intravitreally into the right eye of 10 healthy rhesus macaques. A complete ophthalmic examination, intraocular pressure (IOP) measurement, fundus photography, spectral-domain optical coherence tomography (SD-OCT), and electroretinogram were performed monthly for 6 months. One macaque was euthanized monthly, and the enucleated eyes were submitted for measurement of bioactive aflibercept concentrations. Four eyes were submitted for histopathology.

Results

Injected aflibercept-DDS was visualized in the vitreous until 6 months postinjection. No abnormalities were observed in the anterior segment, and IOP remained within normal range during the study period. A small number of cells were observed in the vitreous of some macaques, but otherwise the remainder of the posterior segment examination was normal. No significant changes in retinal architecture or function as assessed by SD-OCT and histology or full-field electroretinography, respectively, were observed. A mild, focal foreign body reaction around the injectate was observed with histology at 6 months postinjection. A mean of 2.1 ng/µL of aflibercept was measured in the vitreous.

Conclusions

Intravitreally injected aflibercept-DDS achieved controlled, sustained release of aflibercept with no adverse effects for up to 6 months in the eyes of healthy rhesus macaques.

Translational Relevance

Aflibercept-DDS may be a more effective method to deliver bioactive antivascular endothelial growth factor agents than current practice by reducing the frequency of intravitreal injections and providing controlled drug release.

Corrosion performance of cold deformed austenitic stainless steels for biomedical applications

Austenitic stainless steels possess an excellent balance of strength and ductility along with the high ability to further raise their strength during cold deformation (CD). Corrosion resistance of austenitic stainless steels (SSs) is affected by cold deformation because passive films on the surface of steels are expected to be modified. A low level of CD enhances the surface diffusion, which results in the formation of a stable passive film leading to an increase in the corrosion resistance in neutral chloride solutions. The chromium content in the passive film on a deformed steel surface is usually richer, with a higher Cr/Fe ratio than that formed on annealed steels. A higher chromium content makes surface films more stable, which improves the corrosion resistance. However, severe CD results in the formation of strain-induced martensite phase and deformation twins, which decreases the localized corrosion resistance by increasing the number of active anodic sites on the surface. The corrosion resistance, especially the pitting resistance, in SSs is diminished with increasing volume fraction of the martensite. In this review, we highlighted the failure modes of corrosion of stainless steel implants, factors affecting corrosion, and effect of CD on mechanical properties and emphatically on the corrosion resistance of SSs for biomedical applications.

Ocular Drug Delivery: A Special Focus on the Thermosensitive Approach

The bioavailability of ophthalmic therapeutics is reduced because of the presence of physiological barriers whose primary function is to hinder the entry of exogenous agents, therefore also decreasing the bioavailability of locally administered drugs. Consequently, repeated ocular administrations are required. Hence, the development of drug delivery systems that ensure suitable drug concentration for prolonged times in different ocular tissues is certainly of great importance. This objective can be partially achieved using thermosensitive drug delivery systems that, owing to their ability of changing their state in response to temperature variations, from room to body temperature, may increase drug bioavailability. In the case of topical instillation, in situ forming gels increase pre-corneal drug residence time as a consequence of their enhanced adhesion to the corneal surface. Otherwise, in the case of intraocular and periocular, i.e., subconjunctival, retrobulbar, peribulbar administration, among others, they have the undoubted advantage of being easily injectable and, owing to their sudden thickening at body temperature, have the ability to form an in situ drug reservoir. As a result, the frequency of administration can be reduced, also favoring the patient’s adhesion to therapy. In the main section of this review, we discuss some of the most common treatment options for ocular diseases, with a special focus on posterior segment treatments, and summarize the most recent improvement deriving from thermosensitive drug delivery strategies. Aside from this, an additional section describes the most widespread in vitro models employed to evaluate the functionality of novel ophthalmic drug delivery systems.

Direct targeting of the mouse optic nerve for therapeutic delivery

BACKGROUND

Animal models of optic nerve injury are often used to study central nervous system (CNS) degeneration and regeneration, and targeting the optic nerve is a powerful approach for axon-protective or remyelination therapy. However, the experimental delivery of drugs or cells to the optic nerve is rarely performed because injections into this structure are difficult in small animals, especially in mice.

NEW METHOD

We investigated and developed methods to deliver drugs or cells to the mouse optic nerve through 3 different routes: a) intraorbital, b) through the optic foramen and c) transcranial.

RESULTS

The methods targeted different parts of the mouse optic nerve: intraorbital proximal (intraorbital), intracranial middle (optic-foramen) or intracranial distal (transcranial) portion.

COMPARISON WITH EXISTING METHODS

Most existing methods target the optic nerve indirectly. For instance, intravitreally delivered cells often cannot cross the inner limiting membrane to reach retinal neurons and optic nerve axons. Systemic delivery, eye drops and intraventricular injections do not always successfully target the optic nerve. Intraorbital and transcranial injections into the optic nerve or chiasm have been performed but these methods have not been well described. We approached the optic nerve with more selective and precise targeting than existing methods.

CONCLUSIONS

We successfully targeted the murine optic nerve intraorbitally, through the optic foramen, and transcranially. Of all methods, the injection through the optic foramen is likely the most innovative and fastest. These methods offer additional approaches for therapeutic intervention to be used by those studying white matter damage and axonal regeneration in the CNS.

Ophthalmic gels: Past, present and future

Aqueous gels formulated using hydrophilic polymers (hydrogels) along with those based on stimuli responsive polymers (in situ gelling or gel forming systems) continue to attract increasing interest for various eye health-related applications. They allow the incorporation of a variety of ophthalmic pharmaceuticals to achieve therapeutic levels of drugs and bioactives at target ocular sites. The integration of sophisticated drug delivery technologies such as nanotechnology-based ones with intelligent and environment responsive systems can extend current treatment duration to provide more clinically relevant time courses (weeks and months instead of hours and days) which will inevitably reduce dose frequency, increase patient compliance and improve clinical outcomes. Novel applications and design of contact lenses and intracanalicular delivery devices along with the move towards integrating gels into various drug delivery devices like intraocular pumps, injections and implants has the potential to reduce comorbidities caused by glaucoma, corneal keratopathy, cataract, diabetic retinopathies and age-related macular degeneration. This review describes ophthalmic gelling systems with emphasis on mechanism of gel formation and application in ophthalmology. It provides a critical appraisal of the techniques and methods used in the characterization of ophthalmic preformed gels and in situ gelling systems along with a thorough insight into the safety and biocompatibility of these systems. Newly developed ophthalmic gels, hydrogels, preformed gels and in situ gelling systems including the latest in the area of stimuli responsive gels, molecularly imprinted gels, nanogels, 3D printed hydrogels; 3D printed devices comprising ophthalmic gels are covered. Finally, new applications of gels in the production of artificial corneas, corneal wound healing and hydrogel contact lenses are described.

Principles of pharmacology in the eye

The eye is a highly specialized organ that is subject to a huge range of pathology. Both local and systemic disease may affect different anatomical regions of the eye. The least invasive routes for ocular drug administration are topical (e.g. eye drops) and systemic (e.g. tablets) formulations. Barriers that subserve as protection against pathogen entry also restrict drug permeation. Topically administered drugs often display limited bioavailability due to many physical and biochemical barriers including the pre-corneal tear film, the structure and biophysiological properties of the cornea, the limited volume that can be accommodated by the cul-de-sac, the lacrimal drainage system and reflex tearing. The tissue layers of the cornea and conjunctiva are further key factors that act to restrict drug delivery. Using carriers that enhance viscosity or bind to the ocular surface increases bioavailability. Matching the pH and polarity of drug molecules to the tissue layers allows greater penetration. Drug delivery to the posterior segment is a greater challenge and, currently, the standard route is via intravitreal injection, notwithstanding the risks of endophthalmitis and retinal detachment with frequent injections. Intraocular implants that allow sustained drug release are at different stages of development. Novel exciting therapeutic approaches include methods for promoting transscleral delivery, sustained release devices, nanotechnology and gene therapy.

Preliminary study of a controllable device for subtenon drug infusion in a rabbit model

BACKGROUND AND OBJECTIVE

Conventional methods to treat intraocular diseases are invasive or associated with adverse effects. A minimally invasive means of sustained-release drug delivery to the vitreous is required. This study evaluated a novel device for subtenon drug delivery to the vitreous, relative to a single subconjunctival injection.

METHODS

Sixty adult New Zealand White rabbits were randomly assigned to receive demethylvancomycin (DMV) by continuous subtenon delivery with the flow rate of 0.1 ml/hr for 24 hr, or as a single 0.3 ml subconjunctival injection in the right eyes. Rabbits were killed in subgroups of six at 1, 3, 6, 12 and 24 hr. The DMV concentration of the vitreous humour of the right eye was analysed by high-performance liquid chromatography.

RESULTS

Overall, the vitreous DMV concentration of the subtenon group was significantly higher than that of the subconjunctival group (F = 25.928, p = 0.001). The DMV concentration of the subtenon group was also significantly higher than that of the subconjunctival group at 3, 6, 12 and 24 hr (t = 2.457, 5.064, 3.085, 4.207; p = 0.04, 0.01, 0.018, 0.004, respectively). In the subtenon group, the DMV concentration reached maximum (2.41 ± 0.67 μg/ml) at 6 hr, and at 24 hr was 2.37 ± 1.23 μg/ml. In the subconjunctival group, the DMV concentration reached maximum (0.48 ± 0.27 μg/ml) at 1 hr and declined to 0.09 ± 0.05 μg/ml at 24 hr.

CONCLUSION

Subtenon application with this novel minimally invasive design is an effective method for delivering an appropriate drug to the vitreous in a sustained and controllable amount.

Antiangiogenic activity of PLGA-Lupeol implants for potential intravitreal applications

Uncontrolled angiogenesis is directly associated with ocular diseases such as macular degeneration and diabetic retinopathy. Implantable polymeric drug delivery systems have been proposed for intravitreal applications and in the present work, we evaluated the antiangiogenic potential of PLGA ocular implants loaded with the triterpene lupeol using in vitro and in vivo models. The drug/polymer physiochemical properties of the lupeol-loaded PLGA were validated as functionally similar using differential scanning calorimetry, Fourier transform infrared spectroscopy, and scanning electron microscopy. Interestingly, in an in vitro culture system, lupeol (100μg/mL and 250μg/mL) was capable to inhibited the proliferation as well as the migration of Human Umbilical Vein Endothelial Cells (HUVEC), without interfering in cell viability, promoting a significant reduction in the percentage of vessels (39.41% and 44.12%, respectively), compared with the control group. In vivo test, by using the chorioallantoic membrane (CAM) model, lupeol-loaded PLGA ocular implants showed antiangiogenic activity comparable to the FDA-approved anti-VEGF antibody Bevacizumab. Overall, our results suggest lupeol-loaded PLGA ocular implants were able to inhibit the angiogenic process by impairing both proliferation and migration of endothelial cells.

Sustained release ophthalmic dexamethasone: In vitro in vivo correlations derived from the PK-Eye

Corticosteroids have long been used to treat intraocular inflammation by intravitreal injection. We describe dexamethasone loaded poly-DL-lactide-co-glycolide (PLGA) microparticles that were fabricated by thermally induced phase separation (TIPS). The dexamethasone loaded microparticles were evaluated using a two-compartment, in vitro aqueous outflow model of the eye (PK-Eye) that estimates drug clearance time from the back of the eye via aqueous outflow by the anterior route. A dexamethasone dose of 0.20±0.02mg in a 50μL volume of TIPS microparticles resulted in a clearance t_1/2 of 9.6±0.3days using simulated vitreous in the PK-Eye. Since corticosteroids can also clear through the retina, it is necessary to account for clearance through the back of the eye. Retinal permeability data, published human ocular pharmacokinetics (PK) and the PK-Eye clearance times were then used to establish in vitro in vivo correlations (IVIVCs) for intraocular clearance times of corticosteroid formulations. A t_1/2 of 48h was estimated for the dexamethasone-TIPS microparticles, which is almost 9 times longer than that reported for dexamethasone suspension in humans. The prediction of human clearance times of permeable molecules from the vitreous compartment can be determined by accounting for drug retinal permeation and determining the experimental clearance via the anterior aqueous outflow pathway using the PK-Eye.

Elevated Intraocular Pressure After Intravitreal Steroid Injection in Diabetic Macular Edema: Monitoring and Management

INTRODUCTION

With the increasing use of intravitreal administration of corticosteroids in macular edema, steroid-induced intraocular pressure (IOP) rise is becoming an emergent issue. However, for patients in whom intravitreal steroids are indicated, there are no specific recommendations for IOP monitoring and management after intravitreal administration of corticosteroids.

METHOD

An expert panel of European ophthalmologists reviewed evidence on corticosteroid-induced IOP elevation. The objective of the panel was to propose an algorithm based on available literature and their own experience for the monitoring and management of corticosteroid-induced IOP elevation, with a focus on diabetic patients.

RESULTS

Data from trials including diabetic patients with a rise of IOP after intravitreal steroid administration indicate that IOP-lowering medical treatment is sufficient for a large majority of patients; only a small percentage underwent laser trabeculoplasty or filtering filtration surgery. A 2-step algorithm is proposed that is based on the basal value of IOP and evidence for glaucoma. The first step is a risk stratification before treatment. Patients normotensive at baseline (IOP ≤ 21 mmHg), do not require additional baseline diagnostic tests. However, patients with baseline ocular hypertension (OHT) (IOP > 21 mmHg) should undergo baseline imaging and visual field testing. The second step describes monitoring and treatment after steroid administration. During follow-up, patients developing OHT should have baseline and periodical imaging and visual field testing; IOP-lowering treatment is proposed only if IOP is >25 mmHg or if diagnostic tests suggest developing glaucoma.

CONCLUSION

The management and follow-up of OHT following intravitreal corticosteroid injection is similar to that of primary OHT. If OHT develops, IOP is controlled in a large proportion of patients with standard IOP treatments. The present algorithm was developed to assist ophthalmologists with guiding principles in the management of corticosteroid-induced IOP elevation.

FUNDING

Alimera Sciences Limited.

Subconjunctivally Implanted Hydrogels for Sustained Insulin Release to Reduce Retinal Cell Apoptosis in Diabetic Rats

PURPOSE

Diabetic retinopathy (DR) is a leading cause of blindness in diabetic patients that involves early-onset retinal cell loss. Here, we report our recent work using subconjunctivally implantable hydrogels for sustained insulin release to the retina to prevent retinal degeneration.

METHODS

The hydrogels are synthesized by UV photopolymerization of N-isopropylacrylamide and a dextran macromer containing oligolactate-(2-hydroxyetheyl methacrylate) units. Insulin was loaded into the hydrogels during the synthesis. The ex vivo bioactivity of insulin released from the hydrogels was tested on fresh rat retinas using immunoprecipitation and immunoblotting to measure insulin receptor tyrosine and Akt phosphorylation. The biosafety and the effect on the blood glucose of the hydrogels were evaluated in rats 2 months after subconjunctival implantation. The release of insulin from the hydrogels was studied both in vitro in PBS (pH 7.4), and in vivo using confocal microscopy and RIA kit. The in vivo bioactivity of the released insulin was investigated in diabetic rats using DNA fragmentation method.

RESULTS

The hydrogels could load insulin with approximately 98% encapsulation efficiency and continuously release FITC-insulin in PBS (pH = 7.4) at 37°C for at least 5 months depending on their composition. Insulin lispro released from the hydrogels was biologically active by increasing insulin receptor tyrosine and Akt serine phosphorylation of ex vivo retinas. In vivo studies showed normal retinal histology 2 months post subconjunctival implantation. Insulin released from subconjunctivally implanted hydrogels could be detected in the retina by using confocal microscopy and RIA kit for 1 week. The implanted hydrogels with insulin lispro did not change the blood glucose level of normal and diabetic rats, but significantly reduced the DNA fragmentation of diabetic retinas for 1 week.

CONCLUSIONS

The developed hydrogels have great potential to sustain release of insulin to the retina via subconjunctival implantation to minimize DR without the risk of hypoglycemia.

Micellar delivery of dasatinib for the inhibition of pathologic cellular processes of the retinal pigment epithelium

The objective of this study was to fabricate dasatinib-loaded nanoparticles and evaluate their efficacy in inhibiting cellular processes of the retinal pigment epithelium (RPE) related to proliferative vitreoretinopathy (PVR), for which there are no approved pharmacological approaches. We successfully encapsulated dasatinib, a poorly soluble multi-targeted tyrosine kinase inhibitor which has great potential for the treatment of PVR, into nanoparticles prepared from micellation of PEG-b-PCL. The size of the nanomicelles was approximately 55nm with a narrow distribution. They increased the solubility of dasatinib by 475× and provided a sustained drug release. ARPE-19, an immortal RPE cell line, was used to assess the in vitro efficacy of micellar dasatinib because the RPE is believed to play a key role in the pathogenesis of PVR. Three cell-based assays, namely, proliferation, adhesion and migration, which represent three important PVR-related cellular changes of the RPE, were conducted and the cytotoxicity of micelles was also evaluated. Both blank and dasatinib-loaded micelles were non-cytotoxic towards ARPE-19 cells. Micellar dasatinib significantly inhibited cell proliferation, adhesion and migration compared to the free drug; this might be attributable to enhanced solubility. PEG-b-PCL micelles were taken up into the ARPE-19 cells by an energy-dependent clatharin and caveolae-mediated endocytosis. Our results indicated that cellular uptake and the anti-proliferation effect of drugloaded micelles were linearly correlated. Drug loading appears to be a critical parameter for cellular uptake which in turn impacts the in vitro bioactivities of polymeric micelles. Our results clearly demonstrated that dasatinib-encapsulated micelles offer considerable promise in the management of PVR.

Transscleral Controlled Delivery of Geranylgeranylaceton Using a Polymeric Device Protects Rat Retina Against Light Injury

We evaluated the effects of a transscleral drug delivery device, consisting of a reservoir and controlled-release cover, which were made of photopolymerized polyethylene glycol dimethacrylate and triethylene glycol dimethacrylate, combined at different ratios. Geranylgeranylacetone (GGA), a heat-shock protein (HSP) inducer, was loaded into the device. The GGA was released from the device under zero-order kinetics. At both 1 week and 4 weeks after device implantation on rat sclera, HSP70 gene and protein expression were up-regulated in the sclera-choroid-retinal pigment epithelium fraction of rat eyes treated with the GGA-loaded device compared with rat eyes treated with saline-loaded devices or eyes of non-treated rats. Flash electroretinograms were recorded 4 days after white light exposure (8000 lx for 18 h). Electroretinographic amplitudes of the a- and b-waves were preserved significantly in rats treated with GGA-loaded devices compared with rats treated with saline-loaded devices. Histological examination showed that the outer nuclear layer thickness was preserved in rats that had the GGA-loaded device. These results may show that transscleral GGA delivery using our device may offer an alternative method to treat retinal diseases.

Ocular Complications of Diabetes and Therapeutic Approaches

Diabetes mellitus (DM) is a metabolic disease defined by elevated blood glucose (BG). DM is a global epidemic and the prevalence is anticipated to continue to increase. The ocular complications of DM negatively impact the quality of life and carry an extremely high economic burden. While systemic control of BG can slow the ocular complications they cannot stop them, especially if clinical symptoms are already present. With the advances in biodegradable polymers, implantable ocular devices can slowly release medication to stop, and in some cases reverse, diabetic complications in the eye. In this review we discuss the ocular complications associated with DM, the treatments available with a focus on localized treatments, and what promising treatments are on the horizon.

Intraocular Implants for the Treatment of Autoimmune Uveitis

Uveitis is the third leading cause of blindness in developed countries. Currently, the most widely used treatment of non-infectious uveitis is corticosteroids. Posterior uveitis and macular edema can be treated with intraocular injection of corticosteroids, however, this is problematic in chronic cases because of the need for repeat injections. Another option is systemic immunosuppressive therapies that have their own undesirable side effects. These systemic therapies result in a widespread suppression of the entire immune system, leaving the patient susceptible to infection. Therefore, an effective localized treatment option is preferred. With the recent advances in bioengineering, biodegradable polymers that allow for a slow sustained-release of a medication. These advances have culminated in drug delivery implants that are food and drug administration (FDA) approved for the treatment of non-infectious uveitis. In this review, we discuss the types of ocular implants available and some of the polymers used, implants used for the treatment of non-infectious uveitis, and bioengineered alternatives that are on the horizon.

Thermoanalytical characterization of clindamycin-loaded intravitreal implants prepared by hot melt extrusion

BACKGROUND

The aim of the present study was to evaluate a non-destructive fabrication method in for the development of sustained-release poly (L, D-lactic acid)-based biodegradable clindamycin phosphate implants for the treatment of ocular toxoplasmosis.

MATERIALS AND METHODS

The rod-shaped intravitreal implants with an average length of 5 mm and a diameter of 0.4 mm were evaluated for their physicochemical parameters. Scanning electron microscopy (SEM), differential scanning calorimetry (DSC), Fourier-transform infrared (FTIR), and nuclear magnetic resonance (1H NMR) studies were employed in order to study the characteristics of these formulations.

RESULTS

Drug content uniformity test confirmed the uniformity in different implant batches. Furthermore, the DSC, FTIR, and 1H NMR studies proved that the fabrication process did not have any destructive effects either on the drug or on the polymer structures.

CONCLUSION

These studies showed that the developed sustained-release implants could be of interest for long-term sustained intraocular delivery of clindamycin, which can provide better patient compliance and also have good potential in terms of industrial feasibility.

The PK-Eye: A Novel In Vitro Ocular Flow Model for Use in Preclinical Drug Development

A 2-compartment in vitro eye flow model has been developed to estimate ocular drug clearance by the anterior aqueous outflow pathway. The model is designed to accelerate the development of longer-acting ophthalmic therapeutics. Dye studies show aqueous flow is necessary for a molecule injected into the vitreous cavity to clear from the model. The clearance times of proteins can be estimated by collecting the aqueous outflow, which was first conducted with bevacizumab using phosphate-buffered saline in the vitreous cavity. A simulated vitreous solution was then used and ranibizumab (0.5 mg) displayed a clearance time of 8.1 ± 3.1 days, which is comparable to that observed in humans. The model can estimate drug release from implants or the dissolution of suspensions as a first step in their clearance mechanism, which will be the rate-limiting step for the overall resident time of a candidate dosage form in the vitreous. A suspension of triamcinolone acetonide (Kenalog®) (4.0 mg) displayed clearance times spanning 26-28 days. These results indicate that the model can be used to determine in vitro-in vivo correlations in preclinical studies to develop long-lasting therapeutics to treat blinding diseases at the back of the eye.

Whole vitreous humor dissection for vitreodynamic analysis

The authors propose an effective technique to isolate whole, intact vitreous core and cortex from post mortem enucleated porcine eyes. While previous studies have shown the results of such dissections, the detailed steps have not been described, precluding researchers outside the field from replicating their methods. Other studies harvest vitreous either through aspiration, which does not maintain the vitreous structure anatomy, or through partial dissection, which only isolates the vitreous core. The proposed method isolates the whole vitreous body, with the vitreous core and cortex intact, while maintaining vitreous anatomy and structural integrity. In this method, a full thickness scleral flap in an enucleated porcine eye is first created and through this, the choroid tissue can be separated from the sclera. The scleral flap is then expanded and the choroid is completely separated from the sclera. Finally the choroid-retina tissue is peeled off the vitreous to leave an isolated intact vitreous body. The proposed vitreous dissection technique can be used to study physical properties of the vitreous humor. In particular, this method has significance for experimental studies involving drug delivery, vitreo-retinal oxygen transport, and intraocular convection.

High Throughput Screening of Valganciclovir in Acidic Microenvironments of Polyester Thin Films

Ganciclovir and valganciclor are antiviral agents used for the treatment of cytomegalovirus retinitis. The conventional method for administering ganciclovir in cytomegalovirus retinitis patients is repeated intravitreal injections. In order to obviate the possible detrimental effects of repeated intraocular injections, to improve compliance and to eliminate systemic side-effects, we investigated the tuning of the ganciclovir pro-drug valganciclovir and the release from thin films of poly(lactic-co-glycolic acid) (PLGA), polycaprolactone (PCL), or mixtures of both, as a step towards prototyping periocular valganciclovir implants. To investigate the drug release, we established and evaluated a high throughput fluorescence-based quantification screening assay for the detection of valganciclovir. Our protocol allows quantifying as little as 20 ng of valganciclovir in 96-well polypropylene plates and a 50× faster analysis compared to traditional HPLC measurements. This improvement can hence be extrapolated to other polyester matrix thin film formulations using a high-throughput approach. The acidic microenvironment within the polyester matrix was found to protect valganciclovir from degradation with resultant increases in the half-life of the drug in the periocular implant to 100 days. Linear release profiles were obtained using the pure polyester polymers for 10 days and 60 days formulations; however, gross phase separations of PCL and acid-terminated PLGA prevented tuning within these timeframes due to the phase separation of the polymer, valganciclovir, or both.

Design and development of intraocular polymeric implant systems for long-term controlled-release of clindamycin phosphate for toxoplasmic retinochoroiditis

BACKGROUND

The release of the anti-toxoplasmosis drug, clindamycin phosphate, from intraocular implants of the biodegradable polymers poly (D, L-lactic acid) (PLA) and poly (D, L-lactide-co-glycolide) (PLGA) has been studied in vitro.

MATERIALS AND METHODS

The preparation of the implants was performed by a melt-extrusion method. The developed extrudates were characterized and compared in in-vitro release profiles for elucidating the drug release mechanism. The formulations containing up to 40% w/w of drug were prepared. Release data in phosphate buffer (pH 7.4) were analyzed by high performance liquid chromatography. The release kinetics were fitted to the zero-order, Higuchi's square-root, first order and the Korsmeyer-Peppas empirical equations for the estimation of various parameters of the drug release curves. Degradation of implants was also investigated morphologically with time (Scanning Electron Microscopy).

RESULTS

It was observed that, the release profiles for the formulations exhibit a typical biphasic profile for bulk-eroding systems, characterized by a first phase of burst release (in first 24 hrs), followed by a phase of slower release. The duration of the secondary phase was found to be proportional to the molecular weight and monomer ratio of copolymers and also polymer-to-drug ratios. It was confirmed that Higuchi and first-order kinetics were the predominant release mechanisms than zero order kinetic. The Korsmeyer-Peppas exponent (n) ranged between 0.10 and 0.96. This value, confirmed fickian as the dominant mechanism for PLA formulations (n ≤ 0.45) and the anomalous mechanism, for PLGAs (0.45 < n < 0.90).

CONCLUSION

The implant of PLA (I.V. 0.2) containing 20% w/w of clindamycin, was identified as the optimum formulation in providing continuous efficient in-vitro release of clindamycin for about 5 weeks.